Subversion Repositories uart2bus

//---------------------------------------------------------------------------------------

// uart test bench   

//

//---------------------------------------------------------------------------------------

`include "timescale.v"

module test;

//---------------------------------------------------------------------------------------

// include uart tasks 

`include "uart_tasks.v"

// internal signal  

reg clock;              // global clock 

reg reset;              // global reset 

reg [6:0] counter;

//---------------------------------------------------------------------------------------

// test bench implementation 

// global signals generation  

initial

begin

        counter = 0;

        reset = 1;

        #40 reset = 0;

end

// clock generator - 40MHz clock 

always

begin

        #12 clock = 0;

        #13 clock = 1;

end

// test bench dump variables 

initial

begin

        $dumpfile("test.vcd");

        //$dumpall;

        $dumpvars(0, test);

end

//------------------------------------------------------------------

// test bench transmitter and receiver 

// uart transmit - test bench control 

initial

begin

        // defualt value of serial output 

        serial_out = 1;

        // transmit a write command to internal register file 

        // command string: "w 4cd9 1a" + CR 

        send_serial (8'h77, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h20, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h34, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h63, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h64, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h39, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h20, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h31, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h61, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h0d, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        // transmit a read command from register file 

        // command string: "r 1a" + CR 

        send_serial (8'h72, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h20, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h31, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h61, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        send_serial (8'h0d, `BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8, 0);

        #100;

        // delay and finish 

        #900000;

        $finish;

end

// uart receive 

initial

begin

        // default value for serial receiver and serial input 

        serial_in = 1;

        get_serial_data = 0;             // data received from get_serial task 

        get_serial_status = 0;           // status of get_serial task  

end

// serial sniffer loop 

always

begin

        // call serial sniffer 

        get_serial(`BAUD_115200, `PARITY_EVEN, `PARITY_OFF, `NSTOPS_1, `NBITS_8);

        // check serial receiver status 

        // byte received OK 

        if (get_serial_status & `RECEIVE_RESULT_OK)

        begin

                // check if not a control character (above and including space ascii code)

                if (get_serial_data >= 8'h20)

                        $display("received byte 0x%h (\"%c\") at %t ns", get_serial_data, get_serial_data, $time);

                else

                        $display("received byte 0x%h (\"%c\") at %t ns", get_serial_data, 8'hb0, $time);

        end

        // false start error 

        if (get_serial_status & `RECEIVE_RESULT_FALSESTART)

                $display("Error (get_char): false start condition at %t", $realtime);

        // bad parity error             

        if (get_serial_status & `RECEIVE_RESULT_BADPARITY)

                $display("Error (get_char): bad parity condition at %t", $realtime);

        // bad stop bits sequence       

        if (get_serial_status & `RECEIVE_RESULT_BADSTOP)

                $display("Error (get_char): bad stop bits sequence at %t", $realtime);

end

//------------------------------------------------------------------

// device under test 

// DUT interface 

wire    [15:0]   int_address;    // address bus to register file 

wire    [7:0]    int_wr_data;    // write data to register file 

wire                    int_write;              // write control to register file 

wire                    int_read;               // read control to register file 

wire    [7:0]    int_rd_data;    // data read from register file 

wire                    ser_in;                 // DUT serial input 

wire                    ser_out;                // DUT serial output 

// DUT instance 

uart2bus_top uart2bus1

(

        .clock(clock),

        .reset(reset),

        .ser_in(ser_in),

        .ser_out(ser_out),

        .int_address(int_address),

        .int_wr_data(int_wr_data),

        .int_write(int_write),

        .int_rd_data(int_rd_data),

        .int_read(int_read)

);

// serial interface to test bench 

assign ser_in = serial_out;

always @ (posedge clock) serial_in = ser_out;

// register file model 

reg_file_model reg_file1

(

        .clock(clock), .reset(reset),

        .int_address(int_address[7:0]), .int_wr_data(int_wr_data), .int_write(int_write),

        .int_rd_data(int_rd_data), .int_read(int_read)

);

endmodule

//---------------------------------------------------------------------------------------

//                                              Th.. Th.. Th.. Thats all folks !!!

//---------------------------------------------------------------------------------------