Line 33... |
Line 33... |
with good disk caching like 2.11BSD the impact of such a 'slow disk' is
|
with good disk caching like 2.11BSD the impact of such a 'slow disk' is
|
actually smaller than the bare numbers suggest.
|
actually smaller than the bare numbers suggest.
|
|
|
2. FPGA Board setup -------------------------------------------------------
|
2. FPGA Board setup -------------------------------------------------------
|
|
|
|
- for s3board and nexys2
|
- connect the USB-RS232 cable to the RS232 port of the s3board or nexys2
|
- connect the USB-RS232 cable to the RS232 port of the s3board or nexys2
|
- set the latency timer of the USB-RS232, e.g. with
|
- set the latency timer of the USB-RS232, e.g. with
|
sudo $RETROBASE/tools/bin/set_ftdi_lat USB0 1
|
sudo $RETROBASE/tools/bin/set_ftdi_lat USB0 1
|
- ensure that all 8 switches are in '0' position
|
- ensure that all 8 switches are in '0' position
|
- load the w11a design into the FPGA, e.g. via impact
|
- load the w11a design into the FPGA, e.g. via impact
|
|
|
|
- for nexys3
|
|
- connect USB cable to the 'usb uart' port (next to the 5 buttons)
|
|
- ensure that all 8 switches are in '0' position
|
|
- load the w11a design into the FPGA, e.g. via impact
|
|
|
3. Unix V5 system ---------------------------------------------------------
|
3. Unix V5 system ---------------------------------------------------------
|
|
|
- A disk set is available from
|
- A disk set is available from
|
http://www-linux.gsi.de/~mueller/retro/oc_w11/data/unix_v5_rkset.tgz
|
http://www-linux.gsi.de/~mueller/retro/oc_w11/data/unix_v5_rkset.tgz
|
Download, unpack and copy the disk images (*.dsk) to
|
Download, unpack and copy the disk images (*.dsk) to
|
Line 51... |
Line 57... |
- Setup USB-RS232 cable, start xterm in vt100 mode and the server backend
|
- Setup USB-RS232 cable, start xterm in vt100 mode and the server backend
|
|
|
cd $RETROBASE/rtl/sys_gen/w11a/tb
|
cd $RETROBASE/rtl/sys_gen/w11a/tb
|
sudo $RETROBASE/tools/bin/set_ftdi_lat USB0 1
|
sudo $RETROBASE/tools/bin/set_ftdi_lat USB0 1
|
telnet_starter -d DL0 &
|
telnet_starter -d DL0 &
|
dorri -u0,460 @uv5_boot.pcmd
|
[for s3,n2:] dorri -u0,460 @uv5_boot.pcmd
|
|
[for n3:] dorri -u0,500,1,0 @uv5_boot.pcmd
|
|
|
- the boot dialog in the console xterm window will look like
|
- the boot dialog in the console xterm window will look like
|
(required input is in {..}, with {} denoting a carriage return:
|
(required input is in {..}, with {} denoting a carriage return:
|
|
|
@{unix}
|
@{unix}
|
Line 90... |
Line 97... |
|
|
cd $RETROBASE/rtl/sys_gen/w11a/tb
|
cd $RETROBASE/rtl/sys_gen/w11a/tb
|
sudo $RETROBASE/tools/bin/set_ftdi_lat USB0 1
|
sudo $RETROBASE/tools/bin/set_ftdi_lat USB0 1
|
telnet_starter -d DL0 &
|
telnet_starter -d DL0 &
|
telnet_starter -d DL1 &
|
telnet_starter -d DL1 &
|
dorri -u0,460 @211bsd_rk_boot.pcmd
|
[for s3,n2:] dorri -u0,460 @211bsd_rk_boot.pcmd
|
|
[for n3:] dorri -u0,500,1,0 @211bsd_rk_boot.pcmd
|
|
|
- the boot dialog in the console xterm window will look like
|
- the boot dialog in the console xterm window will look like
|
(required input is in {..}, with {} denoting a carriage return:
|
(required input is in {..}, with {} denoting a carriage return:
|
|
|
70Boot from rk(0,0,0) at 0177404
|
70Boot from rk(0,0,0) at 0177404
|