OpenCores
URL https://opencores.org/ocsvn/xulalx25soc/xulalx25soc/trunk

Subversion Repositories xulalx25soc

[/] [xulalx25soc/] [trunk/] [rtl/] [cpu/] [zipsystem.v] - Diff between revs 52 and 68

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 52 Rev 68
Line 171... Line 171...
`endif
`endif
                );
                );
        parameter       RESET_ADDRESS=24'h0100000, ADDRESS_WIDTH=24,
        parameter       RESET_ADDRESS=24'h0100000, ADDRESS_WIDTH=24,
                        LGICACHE=10, START_HALTED=1, EXTERNAL_INTERRUPTS=1,
                        LGICACHE=10, START_HALTED=1, EXTERNAL_INTERRUPTS=1,
`ifdef  OPT_MULTIPLY
`ifdef  OPT_MULTIPLY
                        IMPLEMENT_MPY = 1,
                        IMPLEMENT_MPY = `OPT_MULTIPLY,
`else
`else
                        IMPLEMENT_MPY = 0,
                        IMPLEMENT_MPY = 0,
`endif
`endif
`ifdef  OPT_DIVIDE
`ifdef  OPT_DIVIDE
                        IMPLEMENT_DIVIDE=1,
                        IMPLEMENT_DIVIDE=1,
Line 367... Line 367...
        //
        //
        // The WATCHDOG Timer
        // The WATCHDOG Timer
        //
        //
        wire            wdt_ack, wdt_stall, wdt_reset;
        wire            wdt_ack, wdt_stall, wdt_reset;
        wire    [31:0]   wdt_data;
        wire    [31:0]   wdt_data;
        ziptimer watchdog(i_clk, cpu_reset, ~cmd_halt,
        ziptimer #(32,31,0)
 
                watchdog(i_clk, cpu_reset, ~cmd_halt,
                        sys_cyc, ((sys_stb)&&(sys_addr == `WATCHDOG)), sys_we,
                        sys_cyc, ((sys_stb)&&(sys_addr == `WATCHDOG)), sys_we,
                                sys_data,
                                sys_data,
                        wdt_ack, wdt_stall, wdt_data, wdt_reset);
                        wdt_ack, wdt_stall, wdt_data, wdt_reset);
 
 
        //
        //
Line 521... Line 522...
        wire    [31:0]   dc_data;
        wire    [31:0]   dc_data;
        wire    [(AW-1):0]       dc_addr;
        wire    [(AW-1):0]       dc_addr;
        wire            cpu_gbl_cyc;
        wire            cpu_gbl_cyc;
        assign  dmac_stb = (sys_stb)&&(sys_addr[4]);
        assign  dmac_stb = (sys_stb)&&(sys_addr[4]);
`ifdef  INCLUDE_DMA_CONTROLLER
`ifdef  INCLUDE_DMA_CONTROLLER
        wbdmac  #(AW) dma_controller(i_clk,
        wbdmac  #(AW) dma_controller(i_clk, cpu_reset,
                                sys_cyc, dmac_stb, sys_we,
                                sys_cyc, dmac_stb, sys_we,
                                        sys_addr[1:0], sys_data,
                                        sys_addr[1:0], sys_data,
                                        dmac_ack, dmac_stall, dmac_data,
                                        dmac_ack, dmac_stall, dmac_data,
                                // Need the outgoing DMAC wishbone bus
                                // Need the outgoing DMAC wishbone bus
                                dc_cyc, dc_stb, dc_we, dc_addr, dc_data,
                                dc_cyc, dc_stb, dc_we, dc_addr, dc_data,
Line 533... Line 534...
                                // External device interrupts
                                // External device interrupts
                                { 1'b0, alt_int_vector, 1'b0,
                                { 1'b0, alt_int_vector, 1'b0,
                                        main_int_vector[14:1], 1'b0 },
                                        main_int_vector[14:1], 1'b0 },
                                // DMAC interrupt, for upon completion
                                // DMAC interrupt, for upon completion
                                dmac_int);
                                dmac_int);
                                // Whether or not the CPU wants the bus, and
 
                                // thus we must kick the DMAC off.
 
                                //   However, the logic required for this
 
                                //   override never worked well, so here
 
                                //   we just don't use it.
 
                                // cpu_gbl_cyc);
 
`else
`else
        reg     r_dmac_ack;
        reg     r_dmac_ack;
        always @(posedge i_clk)
        always @(posedge i_clk)
                r_dmac_ack <= (sys_cyc)&&(dmac_stb);
                r_dmac_ack <= (sys_cyc)&&(dmac_stb);
        assign  dmac_ack = r_dmac_ack;
        assign  dmac_ack = r_dmac_ack;
Line 675... Line 670...
        wire    [31:0]   cpu_data, wb_data;
        wire    [31:0]   cpu_data, wb_data;
        wire            cpu_ack, cpu_stall, cpu_err;
        wire            cpu_ack, cpu_stall, cpu_err;
        wire    [31:0]   cpu_dbg_data;
        wire    [31:0]   cpu_dbg_data;
        assign cpu_dbg_we = ((dbg_cyc)&&(dbg_stb)&&(~cmd_addr[5])
        assign cpu_dbg_we = ((dbg_cyc)&&(dbg_stb)&&(~cmd_addr[5])
                                        &&(dbg_we)&&(dbg_addr));
                                        &&(dbg_we)&&(dbg_addr));
        zipcpu  #(RESET_ADDRESS,ADDRESS_WIDTH,LGICACHE, IMPLEMENT_MPY,
        zipcpu  #(
                        IMPLEMENT_DIVIDE, IMPLEMENT_FPU, IMPLEMENT_LOCK)
                        .RESET_ADDRESS(RESET_ADDRESS),
 
                        .ADDRESS_WIDTH(ADDRESS_WIDTH),
 
                        .LGICACHE(LGICACHE),
 
                        .IMPLEMENT_MPY(IMPLEMENT_MPY),
 
                        .IMPLEMENT_DIVIDE(IMPLEMENT_DIVIDE),
 
                        .IMPLEMENT_FPU(IMPLEMENT_FPU),
 
                        .IMPLEMENT_LOCK(IMPLEMENT_LOCK)
 
                )
                thecpu(i_clk, cpu_reset, pic_interrupt,
                thecpu(i_clk, cpu_reset, pic_interrupt,
                        cpu_halt, cmd_clear_pf_cache, cmd_addr[4:0], cpu_dbg_we,
                        cpu_halt, cmd_clear_pf_cache, cmd_addr[4:0], cpu_dbg_we,
                                dbg_idata, cpu_dbg_stall, cpu_dbg_data,
                                dbg_idata, cpu_dbg_stall, cpu_dbg_data,
                                cpu_dbg_cc, cpu_break,
                                cpu_dbg_cc, cpu_break,
                        cpu_gbl_cyc, cpu_gbl_stb,
                        cpu_gbl_cyc, cpu_gbl_stb,
Line 724... Line 726...
        // Return debug response values
        // Return debug response values
        assign  dbg_odata = (~dbg_addr)?cmd_data
        assign  dbg_odata = (~dbg_addr)?cmd_data
                                :((~cmd_addr[5])?cpu_dbg_data : wb_data);
                                :((~cmd_addr[5])?cpu_dbg_data : wb_data);
        initial dbg_ack = 1'b0;
        initial dbg_ack = 1'b0;
        always @(posedge i_clk)
        always @(posedge i_clk)
                dbg_ack <= (dbg_cyc)&&(~dbg_stall);
                dbg_ack <= (dbg_cyc)&&(dbg_stb)&&(~dbg_stall);
        assign  dbg_stall=(dbg_cyc)&&((~sys_dbg_cyc)||(sys_stall))&&(dbg_addr);
        assign  dbg_stall=(dbg_cyc)&&((~sys_dbg_cyc)||(sys_stall))&&(dbg_addr);
 
 
        // Now for the external wishbone bus
        // Now for the external wishbone bus
        //      Need to arbitrate between the flash cache and the CPU
        //      Need to arbitrate between the flash cache and the CPU
        // The way this works, though, the CPU will stall once the flash 
        // The way this works, though, the CPU will stall once the flash 

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.