Line 2... |
Line 2... |
//
|
//
|
// Filename: cpuops.v
|
// Filename: cpuops.v
|
//
|
//
|
// Project: Zip CPU -- a small, lightweight, RISC CPU soft core
|
// Project: Zip CPU -- a small, lightweight, RISC CPU soft core
|
//
|
//
|
// Purpose: This supports the instruction set reordering of operations
|
// Purpose: This is the ZipCPU ALU function. It handles all of the
|
// created by the second generation instruction set, as well as
|
// instruction opcodes 0-13. (14-15 are divide opcodes).
|
// the new operations of POPC (population count) and BREV (bit reversal).
|
|
//
|
//
|
//
|
//
|
// Creator: Dan Gisselquist, Ph.D.
|
// Creator: Dan Gisselquist, Ph.D.
|
// Gisselquist Technology, LLC
|
// Gisselquist Technology, LLC
|
//
|
//
|
////////////////////////////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////////////////////////////
|
//
|
//
|
// Copyright (C) 2015-2017, Gisselquist Technology, LLC
|
// Copyright (C) 2015-2019, Gisselquist Technology, LLC
|
//
|
//
|
// This program is free software (firmware): you can redistribute it and/or
|
// This program is free software (firmware): you can redistribute it and/or
|
// modify it under the terms of the GNU General Public License as published
|
// modify it under the terms of the GNU General Public License as published
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// your option) any later version.
|
// your option) any later version.
|
Line 35... |
Line 34... |
// http://www.gnu.org/licenses/gpl.html
|
// http://www.gnu.org/licenses/gpl.html
|
//
|
//
|
//
|
//
|
////////////////////////////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////////////////////////////
|
//
|
//
|
|
//
|
|
`default_nettype none
|
|
//
|
|
//
|
`include "cpudefs.v"
|
`include "cpudefs.v"
|
//
|
//
|
module cpuops(i_clk,i_rst, i_ce, i_op, i_a, i_b, o_c, o_f, o_valid,
|
module cpuops(i_clk,i_reset, i_stb, i_op, i_a, i_b, o_c, o_f, o_valid,
|
o_busy);
|
o_busy);
|
parameter IMPLEMENT_MPY = `OPT_MULTIPLY;
|
parameter IMPLEMENT_MPY = `OPT_MULTIPLY;
|
input i_clk, i_rst, i_ce;
|
parameter [0:0] OPT_SHIFTS = 1'b1;
|
input [3:0] i_op;
|
input wire i_clk, i_reset, i_stb;
|
input [31:0] i_a, i_b;
|
input wire [3:0] i_op;
|
|
input wire [31:0] i_a, i_b;
|
output reg [31:0] o_c;
|
output reg [31:0] o_c;
|
output wire [3:0] o_f;
|
output wire [3:0] o_f;
|
output reg o_valid;
|
output reg o_valid;
|
output wire o_busy;
|
output wire o_busy;
|
|
|
|
genvar k;
|
|
|
// Shift register pre-logic
|
// Shift register pre-logic
|
wire [32:0] w_lsr_result, w_asr_result, w_lsl_result;
|
wire [32:0] w_lsr_result, w_asr_result, w_lsl_result;
|
|
generate if (OPT_SHIFTS)
|
|
begin : IMPLEMENT_SHIFTS
|
wire signed [32:0] w_pre_asr_input, w_pre_asr_shifted;
|
wire signed [32:0] w_pre_asr_input, w_pre_asr_shifted;
|
assign w_pre_asr_input = { i_a, 1'b0 };
|
assign w_pre_asr_input = { i_a, 1'b0 };
|
assign w_pre_asr_shifted = w_pre_asr_input >>> i_b[4:0];
|
assign w_pre_asr_shifted = w_pre_asr_input >>> i_b[4:0];
|
assign w_asr_result = (|i_b[31:5])? {(33){i_a[31]}}
|
assign w_asr_result = (|i_b[31:5])? {(33){i_a[31]}}
|
: w_pre_asr_shifted;// ASR
|
: w_pre_asr_shifted;// ASR
|
Line 62... |
Line 70... |
|
|
: ( { i_a, 1'b0 } >> (i_b[4:0]) ));// LSR
|
: ( { i_a, 1'b0 } >> (i_b[4:0]) ));// LSR
|
assign w_lsl_result = ((|i_b[31:6])||(i_b[5]&&(i_b[4:0]!=0)))? 33'h00
|
assign w_lsl_result = ((|i_b[31:6])||(i_b[5]&&(i_b[4:0]!=0)))? 33'h00
|
:((i_b[5])?{i_a[0], 32'h0}
|
:((i_b[5])?{i_a[0], 32'h0}
|
: ({1'b0, i_a } << i_b[4:0])); // LSL
|
: ({1'b0, i_a } << i_b[4:0])); // LSL
|
|
end else begin : NO_SHIFTS
|
|
|
|
assign w_asr_result = { i_a[31], i_a[31:0] };
|
|
assign w_lsr_result = { 1'b0, i_a[31:0] };
|
|
assign w_lsl_result = { i_a[31:0], 1'b0 };
|
|
|
|
end endgenerate
|
|
|
|
//
|
// Bit reversal pre-logic
|
// Bit reversal pre-logic
|
wire [31:0] w_brev_result;
|
wire [31:0] w_brev_result;
|
genvar k;
|
|
generate
|
generate
|
for(k=0; k<32; k=k+1)
|
for(k=0; k<32; k=k+1)
|
begin : bit_reversal_cpuop
|
begin : bit_reversal_cpuop
|
assign w_brev_result[k] = i_b[31-k];
|
assign w_brev_result[k] = i_b[31-k];
|
end endgenerate
|
end endgenerate
|
|
|
// Prelogic for our flags registers
|
// Prelogic for our flags registers
|
wire z, n, v;
|
wire z, n, v;
|
reg c, pre_sign, set_ovfl, keep_sgn_on_ovfl;
|
reg c, pre_sign, set_ovfl, keep_sgn_on_ovfl;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if (i_ce) // 1 LUT
|
if (i_stb) // 1 LUT
|
set_ovfl<=(((i_op==4'h0)&&(i_a[31] != i_b[31]))//SUB&CMP
|
set_ovfl<=(((i_op==4'h0)&&(i_a[31] != i_b[31]))//SUB&CMP
|
||((i_op==4'h2)&&(i_a[31] == i_b[31])) // ADD
|
||((i_op==4'h2)&&(i_a[31] == i_b[31])) // ADD
|
||(i_op == 4'h6) // LSL
|
||(i_op == 4'h6) // LSL
|
||(i_op == 4'h5)); // LSR
|
||(i_op == 4'h5)); // LSR
|
|
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if (i_ce) // 1 LUT
|
if (i_stb) // 1 LUT
|
keep_sgn_on_ovfl<=
|
keep_sgn_on_ovfl<=
|
(((i_op==4'h0)&&(i_a[31] != i_b[31]))//SUB&CMP
|
(((i_op==4'h0)&&(i_a[31] != i_b[31]))//SUB&CMP
|
||((i_op==4'h2)&&(i_a[31] == i_b[31]))); // ADD
|
||((i_op==4'h2)&&(i_a[31] == i_b[31]))); // ADD
|
|
|
wire [63:0] mpy_result; // Where we dump the multiply result
|
wire [63:0] mpy_result; // Where we dump the multiply result
|
reg mpyhi; // Return the high half of the multiply
|
wire mpyhi; // Return the high half of the multiply
|
wire mpybusy; // The multiply is busy if true
|
wire mpybusy; // The multiply is busy if true
|
wire mpydone; // True if we'll be valid on the next clock;
|
wire mpydone; // True if we'll be valid on the next clock;
|
|
|
// A 4-way multiplexer can be done in one 6-LUT.
|
// A 4-way multiplexer can be done in one 6-LUT.
|
// A 16-way multiplexer can therefore be done in 4x 6-LUT's with
|
// A 16-way multiplexer can therefore be done in 4x 6-LUT's with
|
// the Xilinx multiplexer fabric that follows.
|
// the Xilinx multiplexer fabric that follows.
|
// Given that we wish to apply this multiplexer approach to 33-bits,
|
// Given that we wish to apply this multiplexer approach to 33-bits,
|
// this will cost a minimum of 132 6-LUTs.
|
// this will cost a minimum of 132 6-LUTs.
|
|
|
wire this_is_a_multiply_op;
|
wire this_is_a_multiply_op;
|
assign this_is_a_multiply_op = (i_ce)&&((i_op[3:1]==3'h5)||(i_op[3:0]==4'hc));
|
assign this_is_a_multiply_op = (i_stb)&&((i_op[3:1]==3'h5)||(i_op[3:0]==4'hc));
|
|
|
generate
|
//
|
if (IMPLEMENT_MPY == 0)
|
// Pull in the multiply logic from elsewhere
|
begin // No multiply support.
|
//
|
assign mpy_result = 63'h00;
|
`ifdef FORMAL
|
end else if (IMPLEMENT_MPY == 1)
|
`define MPYOP abs_mpy
|
begin // Our single clock option (no extra clocks)
|
|
wire signed [63:0] w_mpy_a_input, w_mpy_b_input;
|
|
assign w_mpy_a_input = {{(32){(i_a[31])&(i_op[0])}},i_a[31:0]};
|
|
assign w_mpy_b_input = {{(32){(i_b[31])&(i_op[0])}},i_b[31:0]};
|
|
assign mpy_result = w_mpy_a_input * w_mpy_b_input;
|
|
assign mpybusy = 1'b0;
|
|
assign mpydone = 1'b0;
|
|
always @(*) mpyhi = 1'b0; // Not needed
|
|
end else if (IMPLEMENT_MPY == 2)
|
|
begin // Our two clock option (ALU must pause for 1 clock)
|
|
reg signed [63:0] r_mpy_a_input, r_mpy_b_input;
|
|
always @(posedge i_clk)
|
|
begin
|
|
r_mpy_a_input <={{(32){(i_a[31])&(i_op[0])}},i_a[31:0]};
|
|
r_mpy_b_input <={{(32){(i_b[31])&(i_op[0])}},i_b[31:0]};
|
|
end
|
|
|
|
assign mpy_result = r_mpy_a_input * r_mpy_b_input;
|
|
assign mpybusy = 1'b0;
|
|
|
|
reg mpypipe;
|
|
initial mpypipe = 1'b0;
|
|
always @(posedge i_clk)
|
|
if (i_rst)
|
|
mpypipe <= 1'b0;
|
|
else
|
|
mpypipe <= (this_is_a_multiply_op);
|
|
|
|
assign mpydone = mpypipe; // this_is_a_multiply_op;
|
|
always @(posedge i_clk)
|
|
if (this_is_a_multiply_op)
|
|
mpyhi = i_op[1];
|
|
end else if (IMPLEMENT_MPY == 3)
|
|
begin // Our three clock option (ALU pauses for 2 clocks)
|
|
reg signed [63:0] r_smpy_result;
|
|
reg [63:0] r_umpy_result;
|
|
reg signed [31:0] r_mpy_a_input, r_mpy_b_input;
|
|
reg [1:0] mpypipe;
|
|
reg [1:0] r_sgn;
|
|
|
|
initial mpypipe = 2'b0;
|
|
always @(posedge i_clk)
|
|
if (i_rst)
|
|
mpypipe <= 2'b0;
|
|
else
|
|
mpypipe <= { mpypipe[0], this_is_a_multiply_op };
|
|
|
|
// First clock
|
|
always @(posedge i_clk)
|
|
begin
|
|
r_mpy_a_input <= i_a[31:0];
|
|
r_mpy_b_input <= i_b[31:0];
|
|
r_sgn <= { r_sgn[0], i_op[0] };
|
|
end
|
|
|
|
// Second clock
|
|
`ifdef VERILATOR
|
|
wire signed [63:0] s_mpy_a_input, s_mpy_b_input;
|
|
wire [63:0] u_mpy_a_input, u_mpy_b_input;
|
|
|
|
assign s_mpy_a_input = {{(32){r_mpy_a_input[31]}},r_mpy_a_input};
|
|
assign s_mpy_b_input = {{(32){r_mpy_b_input[31]}},r_mpy_b_input};
|
|
assign u_mpy_a_input = {32'h00,r_mpy_a_input};
|
|
assign u_mpy_b_input = {32'h00,r_mpy_b_input};
|
|
always @(posedge i_clk)
|
|
r_smpy_result = s_mpy_a_input * s_mpy_b_input;
|
|
always @(posedge i_clk)
|
|
r_umpy_result = u_mpy_a_input * u_mpy_b_input;
|
|
`else
|
`else
|
|
`define MPYOP mpyop
|
wire [31:0] u_mpy_a_input, u_mpy_b_input;
|
|
|
|
assign u_mpy_a_input = r_mpy_a_input;
|
|
assign u_mpy_b_input = r_mpy_b_input;
|
|
|
|
always @(posedge i_clk)
|
|
r_smpy_result = r_mpy_a_input * r_mpy_b_input;
|
|
always @(posedge i_clk)
|
|
r_umpy_result = u_mpy_a_input * u_mpy_b_input;
|
|
`endif
|
`endif
|
|
`MPYOP #(.IMPLEMENT_MPY(IMPLEMENT_MPY)) thempy(i_clk, i_reset, this_is_a_multiply_op, i_op[1:0],
|
always @(posedge i_clk)
|
i_a, i_b, mpydone, mpybusy, mpy_result, mpyhi);
|
if (this_is_a_multiply_op)
|
|
mpyhi = i_op[1];
|
|
assign mpybusy = mpypipe[0];
|
|
assign mpy_result = (r_sgn[1])?r_smpy_result:r_umpy_result;
|
|
assign mpydone = mpypipe[1];
|
|
|
|
// Results are then set on the third clock
|
|
end else // if (IMPLEMENT_MPY <= 4)
|
|
begin // The three clock option
|
|
reg [63:0] r_mpy_result;
|
|
reg [31:0] r_mpy_a_input, r_mpy_b_input;
|
|
reg r_mpy_signed;
|
|
reg [2:0] mpypipe;
|
|
|
|
// First clock, latch in the inputs
|
|
initial mpypipe = 3'b0;
|
|
always @(posedge i_clk)
|
|
begin
|
|
// mpypipe indicates we have a multiply in the
|
|
// pipeline. In this case, the multiply
|
|
// pipeline is a two stage pipeline, so we need
|
|
// two bits in the pipe.
|
|
if (i_rst)
|
|
mpypipe <= 3'h0;
|
|
else begin
|
|
mpypipe[0] <= this_is_a_multiply_op;
|
|
mpypipe[1] <= mpypipe[0];
|
|
mpypipe[2] <= mpypipe[1];
|
|
end
|
|
|
|
if (i_op[0]) // i.e. if signed multiply
|
|
begin
|
|
r_mpy_a_input <= {(~i_a[31]),i_a[30:0]};
|
|
r_mpy_b_input <= {(~i_b[31]),i_b[30:0]};
|
|
end else begin
|
|
r_mpy_a_input <= i_a[31:0];
|
|
r_mpy_b_input <= i_b[31:0];
|
|
end
|
|
// The signed bit really only matters in the
|
|
// case of 64 bit multiply. We'll keep track
|
|
// of it, though, and pretend in all other
|
|
// cases.
|
|
r_mpy_signed <= i_op[0];
|
|
|
|
if (this_is_a_multiply_op)
|
|
mpyhi = i_op[1];
|
|
end
|
|
|
|
assign mpybusy = |mpypipe[1:0];
|
|
assign mpydone = mpypipe[2];
|
|
|
|
// Second clock, do the multiplies, get the "partial
|
|
// products". Here, we break our input up into two
|
|
// halves,
|
|
//
|
|
// A = (2^16 ah + al)
|
|
// B = (2^16 bh + bl)
|
|
//
|
|
// and use these to compute partial products.
|
|
//
|
|
// AB = (2^32 ah*bh + 2^16 (ah*bl + al*bh) + (al*bl)
|
|
//
|
|
// Since we're following the FOIL algorithm to get here,
|
|
// we'll name these partial products according to FOIL.
|
|
//
|
|
// The trick is what happens if A or B is signed. In
|
|
// those cases, the real value of A will not be given by
|
|
// A = (2^16 ah + al)
|
|
// but rather
|
|
// A = (2^16 ah[31^] + al) - 2^31
|
|
// (where we have flipped the sign bit of A)
|
|
// and so ...
|
|
//
|
|
// AB= (2^16 ah + al - 2^31) * (2^16 bh + bl - 2^31)
|
|
// = 2^32(ah*bh)
|
|
// +2^16 (ah*bl+al*bh)
|
|
// +(al*bl)
|
|
// - 2^31 (2^16 bh+bl + 2^16 ah+al)
|
|
// - 2^62
|
|
// = 2^32(ah*bh)
|
|
// +2^16 (ah*bl+al*bh)
|
|
// +(al*bl)
|
|
// - 2^31 (2^16 bh+bl + 2^16 ah+al + 2^31)
|
|
//
|
|
reg [31:0] pp_f, pp_l; // F and L from FOIL
|
|
reg [32:0] pp_oi; // The O and I from FOIL
|
|
reg [32:0] pp_s;
|
|
always @(posedge i_clk)
|
|
begin
|
|
pp_f<=r_mpy_a_input[31:16]*r_mpy_b_input[31:16];
|
|
pp_oi<=r_mpy_a_input[31:16]*r_mpy_b_input[15: 0]
|
|
+ r_mpy_a_input[15: 0]*r_mpy_b_input[31:16];
|
|
pp_l<=r_mpy_a_input[15: 0]*r_mpy_b_input[15: 0];
|
|
// And a special one for the sign
|
|
if (r_mpy_signed)
|
|
pp_s <= 32'h8000_0000-(
|
|
r_mpy_a_input[31:0]
|
|
+ r_mpy_b_input[31:0]);
|
|
else
|
|
pp_s <= 33'h0;
|
|
end
|
|
|
|
// Third clock, add the results and produce a product
|
|
always @(posedge i_clk)
|
|
begin
|
|
r_mpy_result[15:0] <= pp_l[15:0];
|
|
r_mpy_result[63:16] <=
|
|
{ 32'h00, pp_l[31:16] }
|
|
+ { 15'h00, pp_oi }
|
|
+ { pp_s, 15'h00 }
|
|
+ { pp_f, 16'h00 };
|
|
end
|
|
|
|
assign mpy_result = r_mpy_result;
|
|
// Fourth clock -- results are clocked into writeback
|
|
end
|
|
endgenerate // All possible multiply results have been determined
|
|
|
|
//
|
//
|
// The master ALU case statement
|
// The master ALU case statement
|
//
|
//
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if (i_ce)
|
if (i_stb)
|
begin
|
begin
|
pre_sign <= (i_a[31]);
|
pre_sign <= (i_a[31]);
|
c <= 1'b0;
|
c <= 1'b0;
|
casez(i_op)
|
casez(i_op)
|
4'b0000:{c,o_c } <= {1'b0,i_a}-{1'b0,i_b};// CMP/SUB
|
4'b0000:{c,o_c } <= {1'b0,i_a}-{1'b0,i_b};// CMP/SUB
|
Line 331... |
Line 153... |
4'b1011: o_c <= mpy_result[63:32]; // MPYHS
|
4'b1011: o_c <= mpy_result[63:32]; // MPYHS
|
4'b1100: o_c <= mpy_result[31:0]; // MPY
|
4'b1100: o_c <= mpy_result[31:0]; // MPY
|
default: o_c <= i_b; // MOV, LDI
|
default: o_c <= i_b; // MOV, LDI
|
endcase
|
endcase
|
end else // if (mpydone)
|
end else // if (mpydone)
|
|
// set the output based upon the multiply result
|
o_c <= (mpyhi)?mpy_result[63:32]:mpy_result[31:0];
|
o_c <= (mpyhi)?mpy_result[63:32]:mpy_result[31:0];
|
|
|
reg r_busy;
|
reg r_busy;
|
initial r_busy = 1'b0;
|
initial r_busy = 1'b0;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if (i_rst)
|
if (i_reset)
|
r_busy <= 1'b0;
|
r_busy <= 1'b0;
|
|
else if (IMPLEMENT_MPY > 1)
|
|
r_busy <= ((i_stb)&&(this_is_a_multiply_op))||mpybusy;
|
else
|
else
|
r_busy <= ((IMPLEMENT_MPY > 1)
|
r_busy <= 1'b0;
|
&&(this_is_a_multiply_op))||mpybusy;
|
|
assign o_busy = (r_busy); // ||((IMPLEMENT_MPY>1)&&(this_is_a_multiply_op));
|
assign o_busy = (r_busy); // ||((IMPLEMENT_MPY>1)&&(this_is_a_multiply_op));
|
|
|
|
|
assign z = (o_c == 32'h0000);
|
assign z = (o_c == 32'h0000);
|
assign n = (o_c[31]);
|
assign n = (o_c[31]);
|
Line 353... |
Line 178... |
|
|
assign o_f = { v, n^vx, c, z };
|
assign o_f = { v, n^vx, c, z };
|
|
|
initial o_valid = 1'b0;
|
initial o_valid = 1'b0;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
if (i_rst)
|
if (i_reset)
|
o_valid <= 1'b0;
|
o_valid <= 1'b0;
|
else if (IMPLEMENT_MPY <= 1)
|
else if (IMPLEMENT_MPY <= 1)
|
o_valid <= (i_ce);
|
o_valid <= (i_stb);
|
else
|
else
|
o_valid <=((i_ce)&&(!this_is_a_multiply_op))||(mpydone);
|
o_valid <=((i_stb)&&(!this_is_a_multiply_op))||(mpydone);
|
|
|
|
`ifdef FORMAL
|
|
initial assume(i_reset);
|
|
reg f_past_valid;
|
|
|
|
initial f_past_valid = 1'b0;
|
|
always @(posedge i_clk)
|
|
f_past_valid = 1'b1;
|
|
|
|
`define ASSERT assert
|
|
`ifdef CPUOPS
|
|
`define ASSUME assume
|
|
`else
|
|
`define ASSUME assert
|
|
`endif
|
|
|
|
// No request should be given us if/while we are busy
|
|
always @(posedge i_clk)
|
|
if (o_busy)
|
|
`ASSUME(!i_stb);
|
|
|
|
// Following any request other than a multiply request, we should
|
|
// respond in the next cycle
|
|
always @(posedge i_clk)
|
|
if ((f_past_valid)&&(!$past(o_busy))&&(!$past(this_is_a_multiply_op)))
|
|
`ASSERT(!o_busy);
|
|
|
|
// Valid and busy can never both be asserted
|
|
always @(posedge i_clk)
|
|
`ASSERT((!o_valid)||(!r_busy));
|
|
|
|
// Following any busy, we should always become valid
|
|
always @(posedge i_clk)
|
|
if ((f_past_valid)&&($past(o_busy))&&(!o_busy))
|
|
`ASSERT($past(i_reset) || o_valid);
|
|
|
|
// Check the shift values
|
|
always @(posedge i_clk)
|
|
if ((f_past_valid)&&($past(i_stb)))
|
|
begin
|
|
if (($past(|i_b[31:6]))||($past(i_b[5:0])>6'd32))
|
|
begin
|
|
assert(($past(i_op)!=4'h5)
|
|
||({o_c,c}=={(33){1'b0}}));
|
|
assert(($past(i_op)!=4'h6)
|
|
||({c,o_c}=={(33){1'b0}}));
|
|
assert(($past(i_op)!=4'h7)
|
|
||({o_c,c}=={(33){$past(i_a[31])}}));
|
|
end else if ($past(i_b[5:0]==6'd32))
|
|
begin
|
|
assert(($past(i_op)!=4'h5)
|
|
||(o_c=={(32){1'b0}}));
|
|
assert(($past(i_op)!=4'h6)
|
|
||(o_c=={(32){1'b0}}));
|
|
assert(($past(i_op)!=4'h7)
|
|
||(o_c=={(32){$past(i_a[31])}}));
|
|
end if ($past(i_b)==0)
|
|
begin
|
|
assert(($past(i_op)!=4'h5)
|
|
||({o_c,c}=={$past(i_a), 1'b0}));
|
|
assert(($past(i_op)!=4'h6)
|
|
||({c,o_c}=={1'b0, $past(i_a)}));
|
|
assert(($past(i_op)!=4'h7)
|
|
||({o_c,c}=={$past(i_a), 1'b0}));
|
|
end if ($past(i_b)==1)
|
|
begin
|
|
assert(($past(i_op)!=4'h5)
|
|
||({o_c,c}=={1'b0, $past(i_a)}));
|
|
assert(($past(i_op)!=4'h6)
|
|
||({c,o_c}=={$past(i_a),1'b0}));
|
|
assert(($past(i_op)!=4'h7)
|
|
||({o_c,c}=={$past(i_a[31]),$past(i_a)}));
|
|
end if ($past(i_b)==2)
|
|
begin
|
|
assert(($past(i_op)!=4'h5)
|
|
||({o_c,c}=={2'b0, $past(i_a[31:1])}));
|
|
assert(($past(i_op)!=4'h6)
|
|
||({c,o_c}=={$past(i_a[30:0]),2'b0}));
|
|
assert(($past(i_op)!=4'h7)
|
|
||({o_c,c}=={{(2){$past(i_a[31])}},$past(i_a[31:1])}));
|
|
end if ($past(i_b)==31)
|
|
begin
|
|
assert(($past(i_op)!=4'h5)
|
|
||({o_c,c}=={31'b0, $past(i_a[31:30])}));
|
|
assert(($past(i_op)!=4'h6)
|
|
||({c,o_c}=={$past(i_a[1:0]),31'b0}));
|
|
assert(($past(i_op)!=4'h7)
|
|
||({o_c,c}=={{(31){$past(i_a[31])}},$past(i_a[31:30])}));
|
|
end
|
|
end
|
|
`endif
|
endmodule
|
endmodule
|
|
//
|
|
// iCE40 NoMPY,w/Shift NoMPY,w/o Shift
|
|
// SB_CARRY 64 64
|
|
// SB_DFFE 3 3
|
|
// SB_DFFESR 1 1
|
|
// SB_DFFSR 33 33
|
|
// SB_LUT4 748 323
|
|
|
No newline at end of file
|
No newline at end of file
|