OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [rtl/] [zipsystem.v] - Diff between revs 194 and 201

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 194 Rev 201
Line 1... Line 1...
///////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
//
//
// Filename:    zipsystem.v
// Filename:    zipsystem.v
//
//
// Project:     Zip CPU -- a small, lightweight, RISC CPU soft core
// Project:     Zip CPU -- a small, lightweight, RISC CPU soft core
//
//
Line 60... Line 60...
//      watchdog-timers,
//      watchdog-timers,
//
//
// Creator:     Dan Gisselquist, Ph.D.
// Creator:     Dan Gisselquist, Ph.D.
//              Gisselquist Technology, LLC
//              Gisselquist Technology, LLC
//
//
///////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
//
//
// Copyright (C) 2015-2016, Gisselquist Technology, LLC
// Copyright (C) 2015-2017, Gisselquist Technology, LLC
//
//
// This program is free software (firmware): you can redistribute it and/or
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of  the GNU General Public License as published
// modify it under the terms of  the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
// your option) any later version.
Line 74... Line 74...
// This program is distributed in the hope that it will be useful, but WITHOUT
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
// for more details.
//
//
 
// You should have received a copy of the GNU General Public License along
 
// with this program.  (It's in the $(ROOT)/doc directory.  Run make with no
 
// target there if the PDF file isn't present.)  If not, see
 
// <http://www.gnu.org/licenses/> for a copy.
 
//
// License:     GPL, v3, as defined and found on www.gnu.org,
// License:     GPL, v3, as defined and found on www.gnu.org,
//              http://www.gnu.org/licenses/gpl.html
//              http://www.gnu.org/licenses/gpl.html
//
//
//
//
///////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
 
//
//
//
`include "cpudefs.v"
`include "cpudefs.v"
//
//
// While I hate adding delays to any bus access, this next delay is required
// While I hate adding delays to any bus access, this next delay is required
// to make timing close in my Basys-3 design.
// to make timing close in my Basys-3 design.
Line 155... Line 161...
//
//
//
//
//
//
module  zipsystem(i_clk, i_rst,
module  zipsystem(i_clk, i_rst,
                // Wishbone master interface from the CPU
                // Wishbone master interface from the CPU
                o_wb_cyc, o_wb_stb, o_wb_we, o_wb_addr, o_wb_data,
                o_wb_cyc, o_wb_stb, o_wb_we, o_wb_addr, o_wb_data, o_wb_sel,
                        i_wb_ack, i_wb_stall, i_wb_data, i_wb_err,
                        i_wb_ack, i_wb_stall, i_wb_data, i_wb_err,
                // Incoming interrupts
                // Incoming interrupts
                i_ext_int,
                i_ext_int,
                // Our one outgoing interrupt
                // Our one outgoing interrupt
                o_ext_int,
                o_ext_int,
Line 168... Line 174...
                        o_dbg_ack, o_dbg_stall, o_dbg_data
                        o_dbg_ack, o_dbg_stall, o_dbg_data
`ifdef  DEBUG_SCOPE
`ifdef  DEBUG_SCOPE
                , o_cpu_debug
                , o_cpu_debug
`endif
`endif
                );
                );
        parameter       RESET_ADDRESS=32'h0100000, ADDRESS_WIDTH=32,
        parameter       RESET_ADDRESS=32'h0100000, ADDRESS_WIDTH=30,
                        LGICACHE=10, START_HALTED=1, EXTERNAL_INTERRUPTS=1,
                        LGICACHE=10, START_HALTED=1, EXTERNAL_INTERRUPTS=1,
`ifdef  OPT_MULTIPLY
`ifdef  OPT_MULTIPLY
                        IMPLEMENT_MPY = `OPT_MULTIPLY,
                        IMPLEMENT_MPY = `OPT_MULTIPLY,
`else
`else
                        IMPLEMENT_MPY = 0,
                        IMPLEMENT_MPY = 0,
Line 185... Line 191...
`ifdef  OPT_IMPLEMENT_FPU
`ifdef  OPT_IMPLEMENT_FPU
                        IMPLEMENT_FPU=1,
                        IMPLEMENT_FPU=1,
`else
`else
                        IMPLEMENT_FPU=0,
                        IMPLEMENT_FPU=0,
`endif
`endif
                        IMPLEMENT_LOCK=1,
                        IMPLEMENT_LOCK=1;
                        // Derived parameters
        localparam      // Derived parameters
                        AW=ADDRESS_WIDTH;
                        AW=ADDRESS_WIDTH;
        input   i_clk, i_rst;
        input   i_clk, i_rst;
        // Wishbone master
        // Wishbone master
        output  wire            o_wb_cyc, o_wb_stb, o_wb_we;
        output  wire            o_wb_cyc, o_wb_stb, o_wb_we;
        output  wire    [(AW-1):0]       o_wb_addr;
        output  wire    [(AW-1):0]       o_wb_addr;
        output  wire    [31:0]   o_wb_data;
        output  wire    [31:0]   o_wb_data;
 
        output  wire    [3:0]    o_wb_sel;
        input                   i_wb_ack, i_wb_stall;
        input                   i_wb_ack, i_wb_stall;
        input           [31:0]   i_wb_data;
        input           [31:0]   i_wb_data;
        input                   i_wb_err;
        input                   i_wb_err;
        // Incoming interrupts
        // Incoming interrupts
        input           [(EXTERNAL_INTERRUPTS-1):0]      i_ext_int;
        input           [(EXTERNAL_INTERRUPTS-1):0]      i_ext_int;
Line 218... Line 225...
        // Handle our interrupt vector generation/coordination
        // Handle our interrupt vector generation/coordination
        wire    [14:0]   main_int_vector, alt_int_vector;
        wire    [14:0]   main_int_vector, alt_int_vector;
        wire            ctri_int, tma_int, tmb_int, tmc_int, jif_int, dmac_int;
        wire            ctri_int, tma_int, tmb_int, tmc_int, jif_int, dmac_int;
        wire            mtc_int, moc_int, mpc_int, mic_int,
        wire            mtc_int, moc_int, mpc_int, mic_int,
                        utc_int, uoc_int, upc_int, uic_int;
                        utc_int, uoc_int, upc_int, uic_int;
 
 
 
        assign  main_int_vector[5:0] = { ctri_int, tma_int, tmb_int, tmc_int,
 
                                        jif_int, dmac_int };
 
 
        generate
        generate
        if (EXTERNAL_INTERRUPTS < 9)
        if (EXTERNAL_INTERRUPTS < 9)
                assign  main_int_vector = { {(9-EXTERNAL_INTERRUPTS){1'b0}},
                assign  main_int_vector[14:6] = { {(9-EXTERNAL_INTERRUPTS){1'b0}},
                                        i_ext_int, ctri_int,
                                        i_ext_int };
                                        tma_int, tmb_int, tmc_int,
 
                                        jif_int, dmac_int };
 
        else
        else
                assign  main_int_vector = { i_ext_int[8:0], ctri_int,
                assign  main_int_vector[14:6] = i_ext_int[8:0];
                                        tma_int, tmb_int, tmc_int,
 
                                        jif_int, dmac_int };
 
        endgenerate
        endgenerate
        generate
        generate
        if (EXTERNAL_INTERRUPTS <= 9)
        if (EXTERNAL_INTERRUPTS <= 9)
`ifdef  INCLUDE_ACCOUNTING_COUNTERS
`ifdef  INCLUDE_ACCOUNTING_COUNTERS
                assign  alt_int_vector = { 7'h00,
                assign  alt_int_vector = { 7'h00,
Line 257... Line 264...
        wire            dbg_cyc, dbg_stb, dbg_we, dbg_addr, dbg_stall;
        wire            dbg_cyc, dbg_stb, dbg_we, dbg_addr, dbg_stall;
        wire    [31:0]   dbg_idata, dbg_odata;
        wire    [31:0]   dbg_idata, dbg_odata;
        reg             dbg_ack;
        reg             dbg_ack;
`ifdef  DELAY_DBG_BUS
`ifdef  DELAY_DBG_BUS
        wire            dbg_err, no_dbg_err;
        wire            dbg_err, no_dbg_err;
 
        wire    [3:0]    dbg_sel;
        assign          dbg_err = 1'b0;
        assign          dbg_err = 1'b0;
        busdelay #(1,32) wbdelay(i_clk,
        busdelay #(1,32) wbdelay(i_clk,
                i_dbg_cyc, i_dbg_stb, i_dbg_we, i_dbg_addr, i_dbg_data,
                i_dbg_cyc, i_dbg_stb, i_dbg_we, i_dbg_addr, i_dbg_data, 4'hf,
                        o_dbg_ack, o_dbg_stall, o_dbg_data, no_dbg_err,
                        o_dbg_ack, o_dbg_stall, o_dbg_data, no_dbg_err,
                dbg_cyc, dbg_stb, dbg_we, dbg_addr, dbg_idata,
                dbg_cyc, dbg_stb, dbg_we, dbg_addr, dbg_idata, dbg_sel,
                        dbg_ack, dbg_stall, dbg_odata, dbg_err);
                        dbg_ack, dbg_stall, dbg_odata, dbg_err);
`else
`else
        assign  dbg_cyc     = i_dbg_cyc;
        assign  dbg_cyc     = i_dbg_cyc;
        assign  dbg_stb     = i_dbg_stb;
        assign  dbg_stb     = i_dbg_stb;
        assign  dbg_we      = i_dbg_we;
        assign  dbg_we      = i_dbg_we;
Line 669... Line 677...
        // The CPU itself
        // The CPU itself
        //
        //
        wire            cpu_gbl_stb, cpu_lcl_cyc, cpu_lcl_stb,
        wire            cpu_gbl_stb, cpu_lcl_cyc, cpu_lcl_stb,
                        cpu_we, cpu_dbg_we;
                        cpu_we, cpu_dbg_we;
        wire    [31:0]   cpu_data, wb_data;
        wire    [31:0]   cpu_data, wb_data;
 
        wire    [3:0]    cpu_sel;
        wire            cpu_ack, cpu_stall, cpu_err;
        wire            cpu_ack, cpu_stall, cpu_err;
        wire    [31:0]   cpu_dbg_data;
        wire    [31:0]   cpu_dbg_data;
        assign cpu_dbg_we = ((dbg_cyc)&&(dbg_stb)&&(~cmd_addr[5])
        assign cpu_dbg_we = ((dbg_cyc)&&(dbg_stb)&&(~cmd_addr[5])
                                        &&(dbg_we)&&(dbg_addr));
                                        &&(dbg_we)&&(dbg_addr));
        zipcpu  #(
        zipcpu  #(
Line 688... Line 697...
                        cpu_halt, cmd_clear_pf_cache, cmd_addr[4:0], cpu_dbg_we,
                        cpu_halt, cmd_clear_pf_cache, cmd_addr[4:0], cpu_dbg_we,
                                dbg_idata, cpu_dbg_stall, cpu_dbg_data,
                                dbg_idata, cpu_dbg_stall, cpu_dbg_data,
                                cpu_dbg_cc, cpu_break,
                                cpu_dbg_cc, cpu_break,
                        cpu_gbl_cyc, cpu_gbl_stb,
                        cpu_gbl_cyc, cpu_gbl_stb,
                                cpu_lcl_cyc, cpu_lcl_stb,
                                cpu_lcl_cyc, cpu_lcl_stb,
                                cpu_we, cpu_addr, cpu_data,
                                cpu_we, cpu_addr, cpu_data, cpu_sel,
                                cpu_ack, cpu_stall, wb_data,
                                cpu_ack, cpu_stall, wb_data,
                                cpu_err,
                                cpu_err,
                        cpu_op_stall, cpu_pf_stall, cpu_i_count
                        cpu_op_stall, cpu_pf_stall, cpu_i_count
`ifdef  DEBUG_SCOPE
`ifdef  DEBUG_SCOPE
                        , o_cpu_debug
                        , o_cpu_debug
Line 742... Line 751...
        wire            ext_cyc, ext_stb, ext_we, ext_err;
        wire            ext_cyc, ext_stb, ext_we, ext_err;
        wire            cpu_ext_ack, cpu_ext_stall, ext_ack, ext_stall,
        wire            cpu_ext_ack, cpu_ext_stall, ext_ack, ext_stall,
                                cpu_ext_err;
                                cpu_ext_err;
        wire    [(AW-1):0]       ext_addr;
        wire    [(AW-1):0]       ext_addr;
        wire    [31:0]           ext_odata;
        wire    [31:0]           ext_odata;
 
        wire    [3:0]            ext_sel;
        wbpriarbiter #(32,AW) dmacvcpu(i_clk,
        wbpriarbiter #(32,AW) dmacvcpu(i_clk,
                        cpu_gbl_cyc, cpu_gbl_stb, cpu_we, cpu_addr, cpu_data,
                        cpu_gbl_cyc, cpu_gbl_stb, cpu_we, cpu_addr, cpu_data, cpu_sel,
                                cpu_ext_ack, cpu_ext_stall, cpu_ext_err,
                                cpu_ext_ack, cpu_ext_stall, cpu_ext_err,
                        dc_cyc, dc_stb, dc_we, dc_addr, dc_data,
                        dc_cyc, dc_stb, dc_we, dc_addr, dc_data, 4'hf,
                                        dc_ack, dc_stall, dc_err,
                                        dc_ack, dc_stall, dc_err,
                        ext_cyc, ext_stb, ext_we, ext_addr, ext_odata,
                        ext_cyc, ext_stb, ext_we, ext_addr, ext_odata, ext_sel,
                                ext_ack, ext_stall, ext_err);
                                ext_ack, ext_stall, ext_err);
 
 
`ifdef  DELAY_EXT_BUS
`ifdef  DELAY_EXT_BUS
        busdelay #(AW,32) extbus(i_clk,
        busdelay #(AW,32) extbus(i_clk,
                        ext_cyc, ext_stb, ext_we, ext_addr, ext_odata,
                        ext_cyc, ext_stb, ext_we, ext_addr, ext_odata,
                                ext_ack, ext_stall, ext_idata, ext_err,
                                ext_ack, ext_stall, ext_idata, ext_err,
                        o_wb_cyc, o_wb_stb, o_wb_we, o_wb_addr, o_wb_data,
                        o_wb_cyc, o_wb_stb, o_wb_we, o_wb_addr, o_wb_data, o_wb_sel,
                                i_wb_ack, i_wb_stall, i_wb_data, (i_wb_err)||(wdbus_int));
                                i_wb_ack, i_wb_stall, i_wb_data, (i_wb_err)||(wdbus_int));
`else
`else
        assign  o_wb_cyc   = ext_cyc;
        assign  o_wb_cyc   = ext_cyc;
        assign  o_wb_stb   = ext_stb;
        assign  o_wb_stb   = ext_stb;
        assign  o_wb_we    = ext_we;
        assign  o_wb_we    = ext_we;
        assign  o_wb_addr  = ext_addr;
        assign  o_wb_addr  = ext_addr;
        assign  o_wb_data  = ext_odata;
        assign  o_wb_data  = ext_odata;
 
        assign  o_wb_sel  = ext_sel;
        assign  ext_ack    = i_wb_ack;
        assign  ext_ack    = i_wb_ack;
        assign  ext_stall  = i_wb_stall;
        assign  ext_stall  = i_wb_stall;
        assign  ext_idata  = i_wb_data;
        assign  ext_idata  = i_wb_data;
        assign  ext_err    = (i_wb_err)||(wdbus_int);
        assign  ext_err    = (i_wb_err)||(wdbus_int);
`endif
`endif

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.