URL
https://opencores.org/ocsvn/16x2_lcd_controller/16x2_lcd_controller/trunk
Show entire file |
Details |
Blame |
View Log
Rev 8 |
Rev 9 |
Line 4... |
Line 4... |
+ lcd16x2_ctrl.vhd
|
+ lcd16x2_ctrl.vhd
|
+ lcd16x2_ctrl_demo.vhd
|
+ lcd16x2_ctrl_demo.vhd
|
+ pin_locations.ucf
|
+ pin_locations.ucf
|
- if you use the ML501 board you can leave pin_locations.ucf unchanged, otherwise you
|
- if you use the ML501 board you can leave pin_locations.ucf unchanged, otherwise you
|
have to adjust the locations for your board (see your board's schematics)
|
have to adjust the locations for your board (see your board's schematics)
|
|
- open the file lcd16x2_ctrl_demo.vhd and adjust the constant CLK_PERIOD_NS (clock period in nanoseconds)
|
|
in case your board's oscillator frequency differs from 100MHz. Again, nothing needs to be done for
|
|
the ML501 board.
|
- implement the design and program FPGA
|
- implement the design and program FPGA
|
© copyright 1999-2024
OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.