OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] [rtl/] [System09_Digilent_3S500E/] [System09_Digilent_3S500E.vhd] - Diff between revs 109 and 118

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 109 Rev 118
Line 1... Line 1...
-- $Id: System09_Digilent_3S500E.vhd,v 1.3.2.1 2008/04/08 14:59:48 davidgb Exp $
-- $Id: System09_Digilent_3S500E.vhd,v 1.3.2.1 2008/04/08 14:59:48 davidgb Exp $
--===========================================================================----
--===========================================================================
--
--
--  S Y N T H E Z I A B L E    System09 - SOC.
--          System09 - SoC for the Digilent Spartan 3E Starter board
--
--
--===========================================================================----
--===========================================================================
--
 
--  This core adheres to the GNU public license  
 
--
--
-- File name      : System09_Digilent_3S500E.vhd
-- File name      : System09_Digilent_3S500E.vhd
--
--
 
-- Entity name    : my_system09
 
--
-- Purpose        : Top level file for 6809 compatible system on a chip
-- Purpose        : Top level file for 6809 compatible system on a chip
--                  Designed with Xilinx XC3S500E Spartan 3E FPGA.
--                  Designed with Xilinx XC3S500E Spartan 3E FPGA.
--                  Implemented With Digilent Xilinx Starter FPGA board,
--                  Implemented With Digilent Xilinx Starter FPGA board,
--
--
-- Dependencies   : ieee.Std_Logic_1164
-- Dependencies   : ieee.Std_Logic_1164
--                  ieee.std_logic_unsigned
--                  ieee.std_logic_unsigned
--                  ieee.std_logic_arith
--                  ieee.std_logic_arith
--                  ieee.numeric_std
--                  ieee.numeric_std
--
--
-- Uses           : mon_rom  (kbug_rom2k.vhd) Monitor ROM
-- Uses           : clock_div  (../vhdl/clock_div.vhd)      System clock divider
--                  cpu09    (cpu09.vhd)      CPU core
--                  flasher    (../vhdl/flasher.vhd)        LED flasher
--                  miniuart (minitUART3.vhd) ACIA / MiniUART
--                  ram_32k    (../Spartan3/ram32k_b16.vhd) 32K block RAM
--                           (rxunit3.vhd)
--                  cpu09      (../vhdl/cpu09.vhd)          CPU core
--                           (tx_unit3.vhd)
--                  mon_rom    (../spartan3/sys09bug_3se_rom2k_b16.vhd) Monitor ROM
 
--                  acia6850   (../vhdl/acia6850.vhd)       ACIA
 
--                  ACIA_Clock (../vhdl/ACIA_Clock.vhd)     ACIA Baud Clock Divider
 
--                  keyboard   (../vhdl/keyboard.vhd)       PS/2 Keyboard Interface
 
--                  vdu8       (../vhdl/vdu8.vhd)           80 x 25 Video Display
 
--                  timer      (../vhdl/timer.vhd)          Timer component
 
--                  pia_timer  (../vhdl/pia_timer.vhd)      PIA interrupt Timer cmponent
 
--                  trap            (../vhdl/trap.vhd)           Hardware Breakpoint Bus Trap
 
--                  vdu8       (../vhdl/vdu8.vhd)           VDU
-- 
-- 
-- Author         : John E. Kent      
-- Author         : John E. Kent      
--                  dilbert57@opencores.org      
--                  dilbert57@opencores.org      
 
--      Memory Map     :
 
--
 
-- $0000 - $7FFF System Block RAM
 
-- $E000 - ACIA (SWTPc)
 
-- $E010 - Reserved for SWTPc FD-01 FD1771 FDC
 
-- $E020 - Keyboard
 
-- $E030 - VDU
 
-- $E040 - Reserved for SWTPc MP-T (was Compact Flash)
 
-- $E050 - Timer
 
-- $E060 - Bus Trap (Hardware Breakpoint Interrupt Logic)
 
-- $E070 - PIA Single Step Timer (was Reserved for Trace Buffer)
 
-- $E080 - Reserved for SWTPc MP-ID 6821 PIA (?)
 
-- $E090 - Reserved for SWTPc MP-ID 6840 PTM (?)
 
-- $E0A0 - reserved for SPP Printer Port
 
-- $E0B0 - Reserved
 
-- $E0C0 - Reserved
 
-- $E100 - $E13F Reserved IDE / Compact Flash Card
 
-- $E140 - $E17F Reserved for Ethernet MAC (XESS)
 
-- $E180 - $E1BF Reserved for Expansion Slot 0 (XESS)
 
-- $E1C0 - $E1FF Reserved for Expansion Slot 1 (XESS)
 
-- $E200 - $EFFF Dual Port RAM interface
 
-- $F000 - $F7FF Reserved SWTPc DMAF-2
 
-- $F800 - $FFFF Sys09bug ROM (Read only)
 
-- $FFF0 - $FFFF Reserved for DAT - Dynamic Address Translation (Write Only)
 
--
 
--  Copyright (C) 2003 - 2010 John Kent
 
--
 
--  This program is free software: you can redistribute it and/or modify
 
--  it under the terms of the GNU General Public License as published by
 
--  the Free Software Foundation, either version 3 of the License, or
 
--  (at your option) any later version.
 
--
 
--  This program is distributed in the hope that it will be useful,
 
--  but WITHOUT ANY WARRANTY; without even the implied warranty of
 
--  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 
--  GNU General Public License for more details.
--
--
--===========================================================================----
--  You should have received a copy of the GNU General Public License
 
--  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
--
 
--===========================================================================
--
--
-- Revision History:
-- Revision History:
--===========================================================================--
--
 
--===========================================================================
-- Version 0.1 - 20 March 2003
-- Version 0.1 - 20 March 2003
-- Version 0.2 - 30 March 2003
-- Version 0.2 - 30 March 2003
-- Version 0.3 - 29 April 2003
-- Version 0.3 - 29 April 2003
-- Version 0.4 - 29 June 2003
-- Version 0.4 - 29 June 2003
--
--
Line 81... Line 129...
-- $E040 - Compact Flash (not implemented)
-- $E040 - Compact Flash (not implemented)
-- $E050 - Timer
-- $E050 - Timer
-- $E060 - Bus trap
-- $E060 - Bus trap
-- $E070 - Parallel I/O
-- $E070 - Parallel I/O
--
--
 
-- Version 4.1 - July / september 2010
 
-- Updated VDU interface
 
-- and possible other changes.
 
--
 
-- Version 4.2 - 14th September 2010
 
-- Replaced ACIA_6850 with acia6850
 
-- Cleaned up decoding
 
-- Added Flasher component
 
-- Added Clock Divider component
 
--
--===========================================================================--
--===========================================================================--
library ieee;
library ieee;
   use ieee.std_logic_1164.all;
   use ieee.std_logic_1164.all;
   use IEEE.STD_LOGIC_ARITH.ALL;
   use IEEE.STD_LOGIC_ARITH.ALL;
   use IEEE.STD_LOGIC_UNSIGNED.ALL;
   use IEEE.STD_LOGIC_UNSIGNED.ALL;
Line 129... Line 187...
  constant ACIA_CLK_FREQ : integer := BAUD_RATE * 16;
  constant ACIA_CLK_FREQ : integer := BAUD_RATE * 16;
 
 
  -----------------------------------------------------------------------------
  -----------------------------------------------------------------------------
  -- Signals
  -- Signals
  -----------------------------------------------------------------------------
  -----------------------------------------------------------------------------
 
  -- Clocks
 
  signal sys_clk        : std_logic;
 
  signal vga_clk        : std_logic;
 
 
  -- BOOT ROM
  -- BOOT ROM
  signal rom_cs         : Std_logic;
  signal rom_cs         : Std_logic;
  signal rom_data_out   : Std_Logic_Vector(7 downto 0);
  signal rom_data_out   : Std_Logic_Vector(7 downto 0);
 
 
  -- UART Interface signals
  -- UART Interface signals
  signal uart_data_out  : Std_Logic_Vector(7 downto 0);
  signal uart_data_out  : Std_Logic_Vector(7 downto 0);
  signal uart_cs        : Std_Logic;
  signal uart_cs        : Std_Logic;
  signal uart_irq       : Std_Logic;
  signal uart_irq       : Std_Logic;
  signal uart_clk       : Std_Logic;
  signal uart_clk       : Std_Logic;
  signal rxbit          : Std_Logic;
 
  signal txbit          : Std_Logic;
 
  signal DCD_n          : Std_Logic;
 
  signal RTS_n          : Std_Logic;
 
  signal CTS_n          : Std_Logic;
 
 
 
  -- timer
  -- timer
  signal timer_data_out : std_logic_vector(7 downto 0);
  signal timer_data_out : std_logic_vector(7 downto 0);
  signal timer_cs       : std_logic;
  signal timer_cs       : std_logic;
  signal timer_irq      : std_logic;
  signal timer_irq      : std_logic;
Line 161... Line 218...
  signal pia_cs         : Std_Logic;
  signal pia_cs         : Std_Logic;
  signal pia_irq_a      : Std_Logic;
  signal pia_irq_a      : Std_Logic;
  signal pia_irq_b      : Std_Logic;
  signal pia_irq_b      : Std_Logic;
 
 
  -- keyboard port
  -- keyboard port
  signal keyboard_data_out : std_logic_vector(7 downto 0);
  signal kbd_data_out   : std_logic_vector(7 downto 0);
  signal keyboard_cs       : std_logic;
  signal kbd_cs         : std_logic;
  signal keyboard_irq      : std_logic;
  signal kbd_irq        : std_logic;
 
 
  -- Video Display Unit
  -- Video Display Unit
  signal vga_clk      : std_logic;
 
  signal vdu_cs       : std_logic;
  signal vdu_cs       : std_logic;
  signal vdu_data_out : std_logic_vector(7 downto 0);
  signal vdu_data_out : std_logic_vector(7 downto 0);
 
 
  -- RAM
  -- RAM
  signal ram_cs       : std_logic; -- memory chip select
  signal ram_cs       : std_logic; -- memory chip select
  signal ram_data_out : std_logic_vector(7 downto 0);
  signal ram_data_out : std_logic_vector(7 downto 0);
 
 
  -- CPU Interface signals
  -- CPU Interface signals
  signal cpu_reset    : Std_Logic;
  signal cpu_rst        : Std_Logic;
  signal cpu_clk      : Std_Logic;
  signal cpu_clk      : Std_Logic;
  signal cpu_rw       : std_logic;
  signal cpu_rw       : std_logic;
  signal cpu_vma      : std_logic;
  signal cpu_vma      : std_logic;
  signal cpu_halt     : std_logic;
  signal cpu_halt     : std_logic;
  signal cpu_hold     : std_logic;
  signal cpu_hold     : std_logic;
Line 188... Line 244...
  signal cpu_nmi      : std_logic;
  signal cpu_nmi      : std_logic;
  signal cpu_addr     : std_logic_vector(15 downto 0);
  signal cpu_addr     : std_logic_vector(15 downto 0);
  signal cpu_data_in  : std_logic_vector(7 downto 0);
  signal cpu_data_in  : std_logic_vector(7 downto 0);
  signal cpu_data_out : std_logic_vector(7 downto 0);
  signal cpu_data_out : std_logic_vector(7 downto 0);
 
 
  -- CLK_50MHZ clock divide by 2
-----------------------------------------------------------------
  signal clock_div    : std_logic_vector(1 downto 0);
--
  signal SysClk       : std_logic;
--                     Clock generator
  signal Reset_n      : std_logic;
--
  signal CountL       : std_logic_vector(23 downto 0);
-----------------------------------------------------------------
 
 
 
component clock_div
 
  port(
 
    clk_in      : in  std_Logic;  -- System Clock input
 
         sys_clk     : out std_logic;  -- System Clock Out    (1/1)
 
         vga_clk     : out std_logic;  -- VGA Pixel Clock Out (1/2)
 
    cpu_clk     : out std_logic   -- CPU Clock Out       (1/4)
 
  );
 
end component;
 
 
 
-----------------------------------------------------------------
 
--
 
--                      LED Flasher
 
--
 
-----------------------------------------------------------------
 
 
 
component flasher
 
  port (
 
    clk      : in  std_logic;           -- Clock input
 
    rst      : in  std_logic;           -- Reset input (active high)
 
    LED      : out Std_Logic            -- LED output        
 
  );
 
end component;
 
 
-----------------------------------------------------------------
-----------------------------------------------------------------
--
--
-- CPU09 CPU core
-- CPU09 CPU core
--
--
Line 204... Line 283...
 
 
component cpu09
component cpu09
  port (
  port (
         clk      :      in std_logic;
         clk      :      in std_logic;
    rst      :  in std_logic;
    rst      :  in std_logic;
    rw       :  out std_logic;
 
    vma      :  out std_logic;
    vma      :  out std_logic;
    address  : out std_logic_vector(15 downto 0);
    addr     : out std_logic_vector(15 downto 0);
 
    rw       :  out std_logic;
         data_out : out std_logic_vector(7 downto 0);
         data_out : out std_logic_vector(7 downto 0);
    data_in  :  in std_logic_vector(7 downto 0);
    data_in  :  in std_logic_vector(7 downto 0);
         irq      :  in std_logic;
         irq      :  in std_logic;
         nmi      :  in std_logic;
         nmi      :  in std_logic;
         firq     :  in std_logic;
         firq     :  in std_logic;
Line 245... Line 324...
component ram_32k
component ram_32k
    Port (
    Port (
       clk      : in  std_logic;
       clk      : in  std_logic;
                 rst      : in  std_logic;
                 rst      : in  std_logic;
                 cs       : in  std_logic;
                 cs       : in  std_logic;
                 rw       : in  std_logic;
 
       addr     : in  std_logic_vector (14 downto 0);
       addr     : in  std_logic_vector (14 downto 0);
 
                 rw       : in  std_logic;
       data_in  : in  std_logic_vector (7 downto 0);
       data_in  : in  std_logic_vector (7 downto 0);
       data_out : out std_logic_vector (7 downto 0)
       data_out : out std_logic_vector (7 downto 0)
    );
    );
end component;
end component;
 
 
Line 263... Line 342...
component pia_timer
component pia_timer
        port (
        port (
         clk       : in    std_logic;
         clk       : in    std_logic;
    rst       : in    std_logic;
    rst       : in    std_logic;
    cs        : in    std_logic;
    cs        : in    std_logic;
    rw        : in    std_logic;
 
    addr      : in    std_logic_vector(1 downto 0);
    addr      : in    std_logic_vector(1 downto 0);
 
    rw        : in    std_logic;
    data_in   : in    std_logic_vector(7 downto 0);
    data_in   : in    std_logic_vector(7 downto 0);
         data_out  : out   std_logic_vector(7 downto 0);
         data_out  : out   std_logic_vector(7 downto 0);
         irqa      : out   std_logic;
         irqa      : out   std_logic;
         irqb      : out   std_logic
         irqb      : out   std_logic
         );
         );
Line 279... Line 358...
--
--
-- 6850 ACIA/UART
-- 6850 ACIA/UART
--
--
-----------------------------------------------------------------
-----------------------------------------------------------------
 
 
component ACIA_6850
component acia6850
  port (
  port (
     clk      : in  Std_Logic;  -- System Clock
     clk      : in  Std_Logic;  -- System Clock
     rst      : in  Std_Logic;  -- Reset input (active high)
     rst      : in  Std_Logic;  -- Reset input (active high)
     cs       : in  Std_Logic;  -- miniUART Chip Select
     cs       : in  Std_Logic;  -- miniUART Chip Select
     rw       : in  Std_Logic;  -- Read / Not Write
     rw       : in  Std_Logic;  -- Read / Not Write
Line 326... Line 405...
component timer
component timer
  port (
  port (
     clk       : in std_logic;
     clk       : in std_logic;
     rst       : in std_logic;
     rst       : in std_logic;
     cs        : in std_logic;
     cs        : in std_logic;
     rw        : in std_logic;
 
     addr      : in std_logic;
     addr      : in std_logic;
 
     rw        : in  std_logic;
     data_in   : in std_logic_vector(7 downto 0);
     data_in   : in std_logic_vector(7 downto 0);
          data_out  : out std_logic_vector(7 downto 0);
          data_out  : out std_logic_vector(7 downto 0);
          irq       : out std_logic
          irq       : out std_logic
          );
          );
end component;
end component;
Line 345... Line 424...
component trap
component trap
        port (
        port (
         clk        : in  std_logic;
         clk        : in  std_logic;
    rst        : in  std_logic;
    rst        : in  std_logic;
    cs         : in  std_logic;
    cs         : in  std_logic;
    rw         : in  std_logic;
 
    vma        : in  std_logic;
    vma        : in  std_logic;
 
    rw         : in  std_logic;
    addr       : in  std_logic_vector(15 downto 0);
    addr       : in  std_logic_vector(15 downto 0);
    data_in    : in  std_logic_vector(7 downto 0);
    data_in    : in  std_logic_vector(7 downto 0);
         data_out   : out std_logic_vector(7 downto 0);
         data_out   : out std_logic_vector(7 downto 0);
         irq        : out std_logic
         irq        : out std_logic
  );
  );
Line 368... Line 447...
  );
  );
  port(
  port(
  clk             : in    std_logic;
  clk             : in    std_logic;
  rst             : in    std_logic;
  rst             : in    std_logic;
  cs              : in    std_logic;
  cs              : in    std_logic;
  rw              : in    std_logic;
 
  addr            : in    std_logic;
  addr            : in    std_logic;
 
    rw              : in    std_logic;
  data_in         : in    std_logic_vector(7 downto 0);
  data_in         : in    std_logic_vector(7 downto 0);
  data_out        : out   std_logic_vector(7 downto 0);
  data_out        : out   std_logic_vector(7 downto 0);
  irq             : out   std_logic;
  irq             : out   std_logic;
  kbd_clk         : inout std_logic;
  kbd_clk         : inout std_logic;
  kbd_data        : inout std_logic
  kbd_data        : inout std_logic
Line 417... Line 496...
      vga_hsync_o  : out std_logic;
      vga_hsync_o  : out std_logic;
      vga_vsync_o  : out std_logic
      vga_vsync_o  : out std_logic
   );
   );
end component;
end component;
 
 
 
 
component BUFG
 
port (
 
     i: in std_logic;
 
          o: out std_logic
 
  );
 
end component;
 
 
 
begin
begin
 
 
  -----------------------------------------------------------------------------
  -----------------------------------------------------------------------------
  -- Instantiation of internal components
  -- Instantiation of internal components
  -----------------------------------------------------------------------------
  -----------------------------------------------------------------------------
 
 
 
----------------------------------------
 
--
 
-- Clock generator
 
--
 
----------------------------------------
 
 
 
my_clock_div: clock_div port map (
 
    clk_in   => CLK_50MHZ,  -- Clock input
 
    sys_clk  => sys_clk,  -- System Clock Out        (1/1)
 
    vga_clk  => vga_clk,  -- CPU/VGA Pixel Clock Out (1/2)
 
    cpu_clk  => open      --                         (1/4)
 
  );
 
 
 
-----------------------------------------
 
--
 
-- LED Flasher
 
--
 
-----------------------------------------
 
 
 
my_LED_flasher : flasher port map (
 
    clk      => cpu_clk,
 
    rst      => cpu_rst,
 
    LED      => LED(0)
 
  );
 
 
 
----------------------------------------
 
--
 
-- 6809 compatible CPU
 
--
 
----------------------------------------
 
 
my_cpu : cpu09  port map (
my_cpu : cpu09  port map (
         clk         => cpu_clk,
         clk         => cpu_clk,
    rst       => cpu_reset,
    rst       => cpu_rst,
    rw       => cpu_rw,
 
    vma       => cpu_vma,
    vma       => cpu_vma,
    address   => cpu_addr(15 downto 0),
    addr      => cpu_addr(15 downto 0),
 
    rw       => cpu_rw,
         data_out  => cpu_data_out,
         data_out  => cpu_data_out,
    data_in   => cpu_data_in,
    data_in   => cpu_data_in,
         irq       => cpu_irq,
         irq       => cpu_irq,
         nmi       => cpu_nmi,
         nmi       => cpu_nmi,
         firq      => cpu_firq,
         firq      => cpu_firq,
Line 447... Line 550...
         hold      => cpu_hold
         hold      => cpu_hold
  );
  );
 
 
my_rom : mon_rom port map (
my_rom : mon_rom port map (
       clk      => cpu_clk,
       clk      => cpu_clk,
                 rst      => cpu_reset,
                 rst      => cpu_rst,
                 cs       => rom_cs,
                 cs       => rom_cs,
                 rw       => '1',
 
       addr     => cpu_addr(10 downto 0),
       addr     => cpu_addr(10 downto 0),
 
                 rw       => '1',
       data_in  => cpu_data_out,
       data_in  => cpu_data_out,
       data_out => rom_data_out
       data_out => rom_data_out
    );
    );
 
 
my_ram : ram_32k port map (
my_ram : ram_32k port map (
       clk      => cpu_clk,
       clk      => cpu_clk,
                 rst      => cpu_reset,
                 rst      => cpu_rst,
                 cs       => ram_cs,
                 cs       => ram_cs,
                 rw       => cpu_rw,
 
       addr     => cpu_addr(14 downto 0),
       addr     => cpu_addr(14 downto 0),
 
                 rw       => cpu_rw,
       data_in  => cpu_data_out,
       data_in  => cpu_data_out,
       data_out => ram_data_out
       data_out => ram_data_out
    );
    );
 
 
my_pia  : pia_timer port map (
my_pia  : pia_timer port map (
         clk         => cpu_clk,
         clk         => cpu_clk,
         rst       => cpu_reset,
         rst       => cpu_rst,
    cs        => pia_cs,
    cs        => pia_cs,
         rw        => cpu_rw,
 
    addr      => cpu_addr(1 downto 0),
    addr      => cpu_addr(1 downto 0),
 
         rw        => cpu_rw,
         data_in   => cpu_data_out,
         data_in   => cpu_data_out,
         data_out  => pia_data_out,
         data_out  => pia_data_out,
    irqa      => pia_irq_a,
    irqa      => pia_irq_a,
    irqb      => pia_irq_b
    irqb      => pia_irq_b
         );
         );
 
 
 
 
----------------------------------------
----------------------------------------
--
--
-- ACIA/UART Serial interface
-- ACIA/UART Serial interface
--
--
----------------------------------------
----------------------------------------
my_ACIA  : ACIA_6850 port map (
my_ACIA  : acia6850 port map (
         clk         => cpu_clk,
         clk         => cpu_clk,
         rst       => cpu_reset,
         rst       => cpu_rst,
    cs        => uart_cs,
    cs        => uart_cs,
         rw        => cpu_rw,
 
    addr      => cpu_addr(0),
    addr      => cpu_addr(0),
 
         rw        => cpu_rw,
         data_in   => cpu_data_out,
         data_in   => cpu_data_out,
         data_out  => uart_data_out,
         data_out  => uart_data_out,
    irq       => uart_irq,
    irq       => uart_irq,
         RxC       => uart_clk,
         RxC       => uart_clk,
         TxC       => uart_clk,
         TxC       => uart_clk,
         RxD       => rxbit,
         RxD       => RS232_DCE_RXD,
         TxD       => txbit,
         TxD       => RS232_DCE_TXD,
         DCD_n     => dcd_n,
         DCD_n     => '0',
         CTS_n     => cts_n,
         CTS_n     => '0',
         RTS_n     => rts_n
         RTS_n     => open
         );
         );
 
 
----------------------------------------
----------------------------------------
--
--
-- ACIA Clock
-- ACIA Clock
Line 512... Line 614...
  generic map(
  generic map(
    SYS_CLK_FREQ  => SYS_CLK_FREQ,
    SYS_CLK_FREQ  => SYS_CLK_FREQ,
         ACIA_CLK_FREQ => ACIA_CLK_FREQ
         ACIA_CLK_FREQ => ACIA_CLK_FREQ
  )
  )
  port map(
  port map(
    clk        => SysClk,
    clk        => sys_clk,
    acia_clk   => uart_clk
    acia_clk   => uart_clk
  );
  );
 
 
 
 
 
 
Line 529... Line 631...
   generic map (
   generic map (
        KBD_CLK_FREQ => CPU_CLK_FREQ
        KBD_CLK_FREQ => CPU_CLK_FREQ
        )
        )
   port map(
   port map(
        clk          => cpu_clk,
        clk          => cpu_clk,
        rst          => cpu_reset,
          rst          => cpu_rst,
        cs           => keyboard_cs,
          cs           => kbd_cs,
        rw           => cpu_rw,
 
        addr         => cpu_addr(0),
        addr         => cpu_addr(0),
 
          rw           => cpu_rw,
        data_in      => cpu_data_out(7 downto 0),
        data_in      => cpu_data_out(7 downto 0),
        data_out     => keyboard_data_out(7 downto 0),
          data_out     => kbd_data_out(7 downto 0),
        irq          => keyboard_irq,
          irq          => kbd_irq,
        kbd_clk      => PS2_CLK,
        kbd_clk      => PS2_CLK,
        kbd_data     => PS2_DATA
        kbd_data     => PS2_DATA
        );
        );
 
 
----------------------------------------
----------------------------------------
Line 557... Line 659...
           VGA_HOR_BACK_PORCH     => 48, -- PIXELS
           VGA_HOR_BACK_PORCH     => 48, -- PIXELS
           VGA_VER_CHARS          => 25, -- CHARACTERS
           VGA_VER_CHARS          => 25, -- CHARACTERS
           VGA_VER_CHAR_LINES     => 16, -- LINES
           VGA_VER_CHAR_LINES     => 16, -- LINES
           VGA_VER_FRONT_PORCH    => 10, -- LINES
           VGA_VER_FRONT_PORCH    => 10, -- LINES
           VGA_VER_SYNC           =>  2, -- LINES
           VGA_VER_SYNC           =>  2, -- LINES
           VGA_VER_FRONT_PORCH    => 34  -- LINES
           VGA_VER_BACK_PORCH     => 34  -- LINES
  )
  )
  port map(
  port map(
 
 
                -- Control Registers
                -- Control Registers
                vdu_clk       => cpu_clk,                                        -- 25 MHz System Clock in
                vdu_clk       => cpu_clk,                                        -- 25 MHz System Clock in
      vdu_rst       => cpu_reset,
      vdu_rst       => cpu_rst,
                vdu_cs        => vdu_cs,
                vdu_cs        => vdu_cs,
                vdu_rw        => cpu_rw,
 
                vdu_addr      => cpu_addr(2 downto 0),
                vdu_addr      => cpu_addr(2 downto 0),
 
                vdu_rw        => cpu_rw,
                vdu_data_in   => cpu_data_out,
                vdu_data_in   => cpu_data_out,
                vdu_data_out  => vdu_data_out,
                vdu_data_out  => vdu_data_out,
 
 
      -- vga port connections
      -- vga port connections
      vga_clk       => vga_clk,                                  -- 25 MHz VDU pixel clock
      vga_clk       => vga_clk,                                  -- 25 MHz VDU pixel clock
Line 587... Line 689...
-- Timer Module
-- Timer Module
--
--
----------------------------------------
----------------------------------------
my_timer  : timer port map (
my_timer  : timer port map (
    clk       => cpu_clk,
    clk       => cpu_clk,
         rst       => cpu_reset,
         rst       => cpu_rst,
    cs        => timer_cs,
    cs        => timer_cs,
         rw        => cpu_rw,
         rw        => cpu_rw,
    addr      => cpu_addr(0),
    addr      => cpu_addr(0),
         data_in   => cpu_data_out,
         data_in   => cpu_data_out,
         data_out  => timer_data_out,
         data_out  => timer_data_out,
Line 603... Line 705...
-- Bus Trap Interrupt logic
-- Bus Trap Interrupt logic
--
--
----------------------------------------
----------------------------------------
my_trap : trap port map (
my_trap : trap port map (
         clk        => cpu_clk,
         clk        => cpu_clk,
    rst        => cpu_reset,
    rst        => cpu_rst,
    cs         => trap_cs,
    cs         => trap_cs,
    rw         => cpu_rw,
    rw         => cpu_rw,
         vma        => cpu_vma,
         vma        => cpu_vma,
    addr       => cpu_addr,
    addr       => cpu_addr,
    data_in    => cpu_data_out,
    data_in    => cpu_data_out,
         data_out   => trap_data_out,
         data_out   => trap_data_out,
         irq        => trap_irq
         irq        => trap_irq
    );
    );
 
 
--
 
-- 25 MHz CPU clock
 
--
 
cpu_clk_buffer : BUFG port map(
 
    i => clock_div(0),
 
         o => cpu_clk
 
    );
 
 
 
--
 
-- 25 MHz VGA Pixel clock
 
--
 
vga_clk_buffer : BUFG port map(
 
    i => clock_div(0),
 
         o => vga_clk
 
    );
 
 
 
----------------------------------------------------------------------
----------------------------------------------------------------------
--
--
-- Process to decode memory map
-- Process to decode memory map
--
--
----------------------------------------------------------------------
----------------------------------------------------------------------
 
 
mem_decode: process( cpu_clk, Reset_n,
mem_decode: process( cpu_addr, cpu_rw, cpu_vma,
                     cpu_addr, cpu_rw, cpu_vma,
 
                                              rom_data_out,
                                              rom_data_out,
                                                        ram_data_out,
                                                        ram_data_out,
                                                   timer_data_out,
                                                   timer_data_out,
                                                        trap_data_out,
                                                        trap_data_out,
                                                        pia_data_out,
                                                        pia_data_out,
                                                   uart_data_out,
                                                   uart_data_out,
                                                        keyboard_data_out,
                                                        kbd_data_out,
                                                        vdu_data_out )
                                                        vdu_data_out )
variable decode_addr : std_logic_vector(3 downto 0);
 
begin
begin
--    decode_addr := dat_addr(3 downto 0) & cpu_addr(11);
 
    decode_addr := cpu_addr(15 downto 12);
 
 
 
      case decode_addr is
        rom_cs   <= '0';
           --
 
                -- SBUG/KBUG/SYS09BUG Monitor ROM $F800 - $FFFF
 
                --
 
                when "1111" => -- $F000 - $FFFF
 
                   cpu_data_in <= rom_data_out;
 
                        rom_cs      <= cpu_vma;              -- read ROM
 
                        ram_cs      <= '0';
                        ram_cs      <= '0';
                        uart_cs     <= '0';
                        uart_cs     <= '0';
                        timer_cs    <= '0';
                        timer_cs    <= '0';
                        trap_cs     <= '0';
                        trap_cs     <= '0';
                        pia_cs      <= '0';
                        pia_cs      <= '0';
                        keyboard_cs <= '0';
        kbd_cs   <= '0';
                        vdu_cs      <= '0';
                        vdu_cs      <= '0';
 
 
 
      case cpu_addr(15 downto 12) is
 
           --
 
                -- SBUG/KBUG/SYS09BUG Monitor ROM $F800 - $FFFF
 
                --
 
                when "1111" => -- $F000 - $FFFF
 
                   cpu_data_in <= rom_data_out;
 
                        rom_cs      <= cpu_vma;              -- read ROM
 
 
      --
      --
                -- IO Devices $E000 - $EFFF
                -- IO Devices $E000 - $EFFF
                --
                --
                when "1110" => -- $E000 - $E7FF
                when "1110" => -- $E000 - $E7FF
                        rom_cs    <= '0';
 
                        ram_cs    <= '0';
 
                   case cpu_addr(7 downto 4) is
                   case cpu_addr(7 downto 4) is
                        --
                        --
                        -- UART / ACIA $E000
                        -- UART / ACIA $E000
                        --
                        --
                        when "0000" => -- $E000
                        when "0000" => -- $E000
                     cpu_data_in <= uart_data_out;
                     cpu_data_in <= uart_data_out;
                          uart_cs     <= cpu_vma;
                          uart_cs     <= cpu_vma;
                          timer_cs    <= '0';
 
                          trap_cs     <= '0';
 
                          pia_cs      <= '0';
 
                          keyboard_cs <= '0';
 
                          vdu_cs      <= '0';
 
 
 
                        --
                        --
                        -- WD1771 FDC sites at $E010-$E01F
                        -- WD1771 FDC sites at $E010-$E01F
                        --
                        --
                        when "0001" => -- $E010
                        when "0001" => -- $E010
           cpu_data_in <= (others => '0');
           cpu_data_in <= (others => '0');
                          uart_cs     <= '0';
 
                          timer_cs    <= '0';
 
                          trap_cs     <= '0';
 
                          pia_cs      <= '0';
 
                          keyboard_cs <= '0';
 
                          vdu_cs      <= '0';
 
 
 
         --
         --
         -- Keyboard port $E020 - $E02F
         -- Keyboard port $E020 - $E02F
                        --
                        --
                        when "0010" => -- $E020
                        when "0010" => -- $E020
           cpu_data_in <= keyboard_data_out;
           cpu_data_in <= kbd_data_out;
                          uart_cs     <= '0';
                          kbd_cs <= cpu_vma;
           timer_cs    <= '0';
 
                          trap_cs     <= '0';
 
                          pia_cs      <= '0';
 
                          keyboard_cs <= cpu_vma;
 
                          vdu_cs      <= '0';
 
 
 
         --
         --
         -- VDU port $E030 - $E03F
         -- VDU port $E030 - $E03F
                        --
                        --
                        when "0011" => -- $E030
                        when "0011" => -- $E030
           cpu_data_in <= vdu_data_out;
           cpu_data_in <= vdu_data_out;
                          uart_cs     <= '0';
 
           timer_cs    <= '0';
 
                          trap_cs     <= '0';
 
                          pia_cs      <= '0';
 
                          keyboard_cs <= '0';
 
                          vdu_cs      <= cpu_vma;
                          vdu_cs      <= cpu_vma;
 
 
         --
         --
                        -- Compact Flash $E040 - $E04F
                        -- Compact Flash $E040 - $E04F
                        --
                        --
                        when "0100" => -- $E040
                        when "0100" => -- $E040
           cpu_data_in <= (others => '0');
           cpu_data_in <= (others => '0');
                          uart_cs     <= '0';
 
                          timer_cs    <= '0';
 
                          trap_cs     <= '0';
 
                          pia_cs      <= '0';
 
                          keyboard_cs <= '0';
 
                          vdu_cs      <= '0';
 
 
 
         --
         --
         -- Timer $E050 - $E05F
         -- Timer $E050 - $E05F
                        --
                        --
                        when "0101" => -- $E050
                        when "0101" => -- $E050
           cpu_data_in <= timer_data_out;
           cpu_data_in <= timer_data_out;
                          uart_cs     <= '0';
 
           timer_cs    <= cpu_vma;
           timer_cs    <= cpu_vma;
                          trap_cs     <= '0';
 
                          pia_cs      <= '0';
 
                          keyboard_cs <= '0';
 
                          vdu_cs      <= '0';
 
 
 
         --
         --
         -- Bus Trap Logic $E060 - $E06F
         -- Bus Trap Logic $E060 - $E06F
                        --
                        --
                        when "0110" => -- $E060
                        when "0110" => -- $E060
           cpu_data_in <= trap_data_out;
           cpu_data_in <= trap_data_out;
                          uart_cs     <= '0';
 
           timer_cs    <= '0';
 
                          trap_cs     <= cpu_vma;
                          trap_cs     <= cpu_vma;
                          pia_cs      <= '0';
 
                          keyboard_cs <= '0';
 
                          vdu_cs      <= '0';
 
 
 
         --
         --
         -- I/O port $E070 - $E07F
         -- PIA Timer $E070 - $E07F
                        --
                        --
                        when "0111" => -- $E070
                        when "0111" => -- $E070
           cpu_data_in <= pia_data_out;
           cpu_data_in <= pia_data_out;
                          uart_cs     <= '0';
 
           timer_cs    <= '0';
 
                          trap_cs     <= '0';
 
                          pia_cs      <= cpu_vma;
                          pia_cs      <= cpu_vma;
                          keyboard_cs <= '0';
 
                          vdu_cs      <= '0';
 
 
 
                        when others => -- $E080 to $E7FF
                        when others => -- $E080 to $E7FF
           cpu_data_in <= (others => '0');
           cpu_data_in <= (others => '0');
                          uart_cs     <= '0';
 
                          timer_cs    <= '0';
 
                          trap_cs     <= '0';
 
                          pia_cs      <= '0';
 
                          keyboard_cs <= '0';
 
                          vdu_cs      <= '0';
 
                   end case;
                   end case;
 
 
                --
                --
                -- $8000 to $DFFF = null
                -- $8000 to $DFFF = null
                --
                --
      when "1101" | "1100" | "1011" | "1010" |
      when "1101" | "1100" | "1011" | "1010" |
                     "1001" | "1000" =>
                     "1001" | "1000" =>
                  cpu_data_in <= (others => '0');
                  cpu_data_in <= (others => '0');
                  rom_cs      <= '0';
 
                  ram_cs      <= '0';
 
                  uart_cs     <= '0';
 
                  timer_cs    <= '0';
 
                  trap_cs     <= '0';
 
                  pia_cs      <= '0';
 
                  keyboard_cs <= '0';
 
                  vdu_cs      <= '0';
 
                --
                --
                -- Everything else is RAM
                -- Everything else is RAM
                --
                --
                when others =>
                when others =>
                  cpu_data_in <= ram_data_out;
                  cpu_data_in <= ram_data_out;
                  rom_cs      <= '0';
 
                  ram_cs      <= cpu_vma;
                  ram_cs      <= cpu_vma;
                  uart_cs     <= '0';
 
                  timer_cs    <= '0';
 
                  trap_cs     <= '0';
 
                  pia_cs      <= '0';
 
                  keyboard_cs <= '0';
 
                  vdu_cs      <= '0';
 
                end case;
                end case;
end process;
end process;
 
 
--
--
-- Interrupts and other bus control signals
-- Assign CPU clock, reset, interrupt, halt & hold signals
 
-- as well as LED signals
--
--
interrupts : process( Reset_n,
assign_signals : process( vga_clk, BTN_SOUTH,
                      pia_irq_a, pia_irq_b, uart_irq, trap_irq, timer_irq, keyboard_irq
                      pia_irq_a, pia_irq_b, uart_irq, trap_irq, timer_irq, kbd_irq
                                                         )
                                                         )
begin
begin
         cpu_reset <= not Reset_n; -- CPU reset is active high
    cpu_clk  <= vga_clk;
    cpu_irq   <= uart_irq or keyboard_irq;
         cpu_rst  <= BTN_SOUTH; -- CPU reset is active high
 
    cpu_irq  <= uart_irq or kbd_irq;
         cpu_nmi   <= pia_irq_a or trap_irq;
         cpu_nmi   <= pia_irq_a or trap_irq;
         cpu_firq  <= pia_irq_b or timer_irq;
         cpu_firq  <= pia_irq_b or timer_irq;
         cpu_halt  <= '0';
         cpu_halt  <= '0';
    cpu_hold  <= '0';
    cpu_hold  <= '0';
end process;
 
 
 
--
    -- LED outputs
--
    LED(7 downto 1) <= (others=>'1');
my_led_flasher: process( SysClk, Reset_n, CountL )
 
begin
 
    if Reset_n = '0' then
 
                   CountL <= "000000000000000000000000";
 
    elsif(SysClk'event and SysClk = '0') then
 
                   CountL <= CountL + 1;
 
    end if;
 
         LED(7 downto 0) <= CountL(23 downto 16);
 
end process;
 
 
 
--
 
-- Clock divider
 
--
 
my_clock_divider: process( SysClk )
 
begin
 
        if SysClk'event and SysClk='0' then
 
                clock_div <= clock_div + "01";
 
        end if;
 
end process;
end process;
 
 
DCD_n <= '0';
 
CTS_n <= '0';
 
Reset_n <= not BTN_SOUTH; -- CPU reset is active high
 
SysClk <= CLK_50MHZ;
 
rxbit <= RS232_DCE_RXD;
 
RS232_DCE_TXD <= txbit;
 
 
 
end my_computer; --===================== End of architecture =======================--
end my_computer; --===================== End of architecture =======================--
 
 
 
 
 No newline at end of file
 No newline at end of file

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.