--===========================================================================--
|
--===========================================================================--
|
-- --
|
-- --
|
-- Synthesizable SWTPc 6809 Dynamic Address Translation Table --
|
-- Synthesizable SWTPc 6809 Dynamic Address Translation Table --
|
-- --
|
-- --
|
--===========================================================================--
|
--===========================================================================--
|
--
|
--
|
-- File name : datram.vhd
|
-- File name : datram.vhd
|
--
|
--
|
-- Entity name : dat_ram
|
-- Entity name : dat_ram
|
--
|
--
|
-- Purpose : Implements a Dynamic Address Translation RAM module
|
-- Purpose : Implements a Dynamic Address Translation RAM module
|
-- as found in the SWTPc MP-09 CPU card.
|
-- as found in the SWTPc MP-09 CPU card.
|
-- Maps the high order 4 address bits to 8 address lines
|
-- Maps the high order 4 address bits to 8 address lines
|
-- extending the memory addressing range from 64K to 1MByte
|
-- extending the memory addressing range from 64K to 1MByte
|
-- Memory segments are mapped on 4 KByte boundaries
|
-- Memory segments are mapped on 4 KByte boundaries
|
-- The DAT registers are mapped at the the top of memory
|
-- The DAT registers are mapped at the the top of memory
|
-- ($FFF0 - $FFFF) and are write only so can map behind ROM.
|
-- ($FFF0 - $FFFF) and are write only so can map behind ROM.
|
-- Since the DAT is not supported by SWTBUG for the 6800,
|
-- Since the DAT is not supported by SWTBUG for the 6800,
|
-- the resgisters reset state map the bottom 64K of RAM.
|
-- the resgisters reset state map the bottom 64K of RAM.
|
--
|
--
|
-- Dependencies : ieee.std_logic_1164
|
-- Dependencies : ieee.std_logic_1164
|
-- ieee.std_logic_unsigned
|
-- ieee.std_logic_unsigned
|
-- unisim.vcomponents
|
-- unisim.vcomponents
|
--
|
--
|
-- Author : John E. Kent
|
-- Author : John E. Kent
|
--
|
--
|
-- Email : dilbert57@opencores.org
|
-- Email : dilbert57@opencores.org
|
--
|
--
|
-- Web : http://opencores.org/project,system09
|
-- Web : http://opencores.org/project,system09
|
--
|
--
|
-- Description :
|
-- Description :
|
--
|
--
|
-- DAT is initializedas follows:
|
-- DAT is initializedas follows:
|
--
|
--
|
-- DAT Dat Logical Physical
|
-- DAT Dat Logical Physical
|
-- Reg Val Addr Addr
|
-- Reg Val Addr Addr
|
-- fff0 - 0f - page 0 - $0xxx = $00xxx (RAM)
|
-- fff0 - 0f - page 0 - $0xxx = $00xxx (RAM)
|
-- fff1 - 0e - page 1 - $1xxx = $01xxx (RAM)
|
-- fff1 - 0e - page 1 - $1xxx = $01xxx (RAM)
|
-- fff2 - 0d - page 0 - $2xxx = $02xxx (RAM)
|
-- fff2 - 0d - page 0 - $2xxx = $02xxx (RAM)
|
-- fff3 - 0c - page 0 - $3xxx = $03xxx (RAM)
|
-- fff3 - 0c - page 0 - $3xxx = $03xxx (RAM)
|
-- fff4 - 0b - page 0 - $4xxx = $04xxx (RAM)
|
-- fff4 - 0b - page 0 - $4xxx = $04xxx (RAM)
|
-- fff5 - 0a - page 0 - $5xxx = $05xxx (RAM)
|
-- fff5 - 0a - page 0 - $5xxx = $05xxx (RAM)
|
-- fff6 - 09 - page 0 - $6xxx = $06xxx (RAM)
|
-- fff6 - 09 - page 0 - $6xxx = $06xxx (RAM)
|
-- fff7 - 08 - page 0 - $7xxx = $07xxx (RAM)
|
-- fff7 - 08 - page 0 - $7xxx = $07xxx (RAM)
|
-- fff8 - 07 - page 0 - $8xxx = $08xxx (RAM)
|
-- fff8 - 07 - page 0 - $8xxx = $08xxx (RAM)
|
-- fff9 - 06 - page 0 - $9xxx = $09xxx (RAM)
|
-- fff9 - 06 - page 0 - $9xxx = $09xxx (RAM)
|
-- fffa - 05 - page 0 - $axxx = $0axxx (RAM)
|
-- fffa - 05 - page 0 - $axxx = $0axxx (RAM)
|
-- fffb - 04 - page 0 - $bxxx = $0bxxx (RAM)
|
-- fffb - 04 - page 0 - $bxxx = $0bxxx (RAM)
|
-- fffc - 03 - page 0 - $cxxx = $0cxxx (RAM)
|
-- fffc - 03 - page 0 - $cxxx = $0cxxx (RAM)
|
-- fffd - 02 - page 0 - $dxxx = $0dxxx (RAM)
|
-- fffd - 02 - page 0 - $dxxx = $0dxxx (RAM)
|
-- fffe - f1 - page 0 - $exxx = $fexxx (I/O)
|
-- fffe - f1 - page 0 - $exxx = $fexxx (I/O)
|
-- ffff - f0 - page 0 - $fxxx = $ffxxx (ROM/DMFA2)
|
-- ffff - f0 - page 0 - $fxxx = $ffxxx (ROM/DMFA2)
|
--
|
--
|
-- Copyright (C) 2003 - 2010 John Kent
|
-- Copyright (C) 2003 - 2010 John Kent
|
--
|
--
|
-- This program is free software: you can redistribute it and/or modify
|
-- This program is free software: you can redistribute it and/or modify
|
-- it under the terms of the GNU General Public License as published by
|
-- it under the terms of the GNU General Public License as published by
|
-- the Free Software Foundation, either version 3 of the License, or
|
-- the Free Software Foundation, either version 3 of the License, or
|
-- (at your option) any later version.
|
-- (at your option) any later version.
|
--
|
--
|
-- This program is distributed in the hope that it will be useful,
|
-- This program is distributed in the hope that it will be useful,
|
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
|
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
|
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
-- GNU General Public License for more details.
|
-- GNU General Public License for more details.
|
--
|
--
|
-- You should have received a copy of the GNU General Public License
|
-- You should have received a copy of the GNU General Public License
|
-- along with this program. If not, see <http://www.gnu.org/licenses/>.
|
-- along with this program. If not, see <http://www.gnu.org/licenses/>.
|
--
|
--
|
--===========================================================================--
|
--===========================================================================--
|
-- --
|
-- --
|
-- Revision History --
|
-- Revision History --
|
-- --
|
-- --
|
--===========================================================================--
|
--===========================================================================--
|
--
|
--
|
-- Version Date Author Changes
|
-- Version Date Author Changes
|
--
|
--
|
-- 0.1 2002-11-10 John Kent Initial version
|
-- 0.1 2002-11-10 John Kent Initial version
|
--
|
--
|
-- 0.2 2006-11-21 John Kent Inverted bottom 4 bits of dat_addr
|
-- 0.2 2006-11-21 John Kent Inverted bottom 4 bits of dat_addr
|
-- so that it is compatible with SWTPc MP-09 card.
|
-- so that it is compatible with SWTPc MP-09 card.
|
--
|
--
|
-- 0.3 2007-02-25 John Kent Modify the sensitivity lists
|
-- 0.3 2007-02-25 John Kent Modify the sensitivity lists
|
--
|
--
|
-- 0.4 2010-06-17 John Kent Update header and added GPL
|
-- 0.4 2010-06-17 John Kent Update header and added GPL
|
--
|
--
|
|
|
library ieee;
|
library ieee;
|
use ieee.std_logic_1164.all;
|
use ieee.std_logic_1164.all;
|
use ieee.std_logic_unsigned.all;
|
use ieee.std_logic_unsigned.all;
|
library unisim;
|
--library unisim;
|
use unisim.vcomponents.all;
|
-- use unisim.vcomponents.all;
|
|
|
entity dat_ram is
|
entity dat_ram is
|
port (
|
port (
|
clk : in std_logic;
|
clk : in std_logic;
|
rst : in std_logic;
|
rst : in std_logic;
|
cs : in std_logic;
|
cs : in std_logic;
|
addr_hi : in std_logic_vector(3 downto 0);
|
addr_hi : in std_logic_vector(3 downto 0);
|
addr_lo : in std_logic_vector(3 downto 0);
|
addr_lo : in std_logic_vector(3 downto 0);
|
rw : in std_logic;
|
rw : in std_logic;
|
data_in : in std_logic_vector(7 downto 0);
|
data_in : in std_logic_vector(7 downto 0);
|
data_out : out std_logic_vector(7 downto 0));
|
data_out : out std_logic_vector(7 downto 0));
|
end dat_ram;
|
end dat_ram;
|
|
|
architecture rtl of dat_ram is
|
architecture rtl of dat_ram is
|
signal dat_reg0 : std_logic_vector(7 downto 0);
|
signal dat_reg0 : std_logic_vector(7 downto 0);
|
signal dat_reg1 : std_logic_vector(7 downto 0);
|
signal dat_reg1 : std_logic_vector(7 downto 0);
|
signal dat_reg2 : std_logic_vector(7 downto 0);
|
signal dat_reg2 : std_logic_vector(7 downto 0);
|
signal dat_reg3 : std_logic_vector(7 downto 0);
|
signal dat_reg3 : std_logic_vector(7 downto 0);
|
signal dat_reg4 : std_logic_vector(7 downto 0);
|
signal dat_reg4 : std_logic_vector(7 downto 0);
|
signal dat_reg5 : std_logic_vector(7 downto 0);
|
signal dat_reg5 : std_logic_vector(7 downto 0);
|
signal dat_reg6 : std_logic_vector(7 downto 0);
|
signal dat_reg6 : std_logic_vector(7 downto 0);
|
signal dat_reg7 : std_logic_vector(7 downto 0);
|
signal dat_reg7 : std_logic_vector(7 downto 0);
|
signal dat_reg8 : std_logic_vector(7 downto 0);
|
signal dat_reg8 : std_logic_vector(7 downto 0);
|
signal dat_reg9 : std_logic_vector(7 downto 0);
|
signal dat_reg9 : std_logic_vector(7 downto 0);
|
signal dat_reg10 : std_logic_vector(7 downto 0);
|
signal dat_reg10 : std_logic_vector(7 downto 0);
|
signal dat_reg11 : std_logic_vector(7 downto 0);
|
signal dat_reg11 : std_logic_vector(7 downto 0);
|
signal dat_reg12 : std_logic_vector(7 downto 0);
|
signal dat_reg12 : std_logic_vector(7 downto 0);
|
signal dat_reg13 : std_logic_vector(7 downto 0);
|
signal dat_reg13 : std_logic_vector(7 downto 0);
|
signal dat_reg14 : std_logic_vector(7 downto 0);
|
signal dat_reg14 : std_logic_vector(7 downto 0);
|
signal dat_reg15 : std_logic_vector(7 downto 0);
|
signal dat_reg15 : std_logic_vector(7 downto 0);
|
|
|
begin
|
begin
|
|
|
---------------------------------
|
---------------------------------
|
--
|
--
|
-- Write DAT RAM
|
-- Write DAT RAM
|
--
|
--
|
---------------------------------
|
---------------------------------
|
|
|
--dat_write : process( clk, rst, addr_lo, cs, rw, data_in )
|
--dat_write : process( clk, rst, addr_lo, cs, rw, data_in )
|
dat_write : process( clk )
|
dat_write : process( clk )
|
begin
|
begin
|
if clk'event and clk = '0' then
|
if clk'event and clk = '0' then
|
if rst = '1' then
|
if rst = '1' then
|
dat_reg0 <= "00001111";
|
dat_reg0 <= "00001111";
|
dat_reg1 <= "00001110";
|
dat_reg1 <= "00001110";
|
dat_reg2 <= "00001101";
|
dat_reg2 <= "00001101";
|
dat_reg3 <= "00001100";
|
dat_reg3 <= "00001100";
|
dat_reg4 <= "00001011";
|
dat_reg4 <= "00001011";
|
dat_reg5 <= "00001010";
|
dat_reg5 <= "00001010";
|
dat_reg6 <= "00001001";
|
dat_reg6 <= "00001001";
|
dat_reg7 <= "00001000";
|
dat_reg7 <= "00001000";
|
dat_reg8 <= "00000111";
|
dat_reg8 <= "00000111";
|
dat_reg9 <= "00000110";
|
dat_reg9 <= "00000110";
|
dat_reg10 <= "00000101";
|
dat_reg10 <= "00000101";
|
dat_reg11 <= "00000100";
|
dat_reg11 <= "00000100";
|
dat_reg12 <= "00000011";
|
dat_reg12 <= "00000011";
|
dat_reg13 <= "00000010";
|
dat_reg13 <= "00000010";
|
dat_reg14 <= "11110001";
|
dat_reg14 <= "11110001";
|
dat_reg15 <= "11110000";
|
dat_reg15 <= "11110000";
|
else
|
else
|
if cs = '1' and rw = '0' then
|
if cs = '1' and rw = '0' then
|
case addr_lo is
|
case addr_lo is
|
when "0000" =>
|
when "0000" =>
|
dat_reg0 <= data_in;
|
dat_reg0 <= data_in;
|
when "0001" =>
|
when "0001" =>
|
dat_reg1 <= data_in;
|
dat_reg1 <= data_in;
|
when "0010" =>
|
when "0010" =>
|
dat_reg2 <= data_in;
|
dat_reg2 <= data_in;
|
when "0011" =>
|
when "0011" =>
|
dat_reg3 <= data_in;
|
dat_reg3 <= data_in;
|
when "0100" =>
|
when "0100" =>
|
dat_reg4 <= data_in;
|
dat_reg4 <= data_in;
|
when "0101" =>
|
when "0101" =>
|
dat_reg5 <= data_in;
|
dat_reg5 <= data_in;
|
when "0110" =>
|
when "0110" =>
|
dat_reg6 <= data_in;
|
dat_reg6 <= data_in;
|
when "0111" =>
|
when "0111" =>
|
dat_reg7 <= data_in;
|
dat_reg7 <= data_in;
|
when "1000" =>
|
when "1000" =>
|
dat_reg8 <= data_in;
|
dat_reg8 <= data_in;
|
when "1001" =>
|
when "1001" =>
|
dat_reg9 <= data_in;
|
dat_reg9 <= data_in;
|
when "1010" =>
|
when "1010" =>
|
dat_reg10 <= data_in;
|
dat_reg10 <= data_in;
|
when "1011" =>
|
when "1011" =>
|
dat_reg11 <= data_in;
|
dat_reg11 <= data_in;
|
when "1100" =>
|
when "1100" =>
|
dat_reg12 <= data_in;
|
dat_reg12 <= data_in;
|
when "1101" =>
|
when "1101" =>
|
dat_reg13 <= data_in;
|
dat_reg13 <= data_in;
|
when "1110" =>
|
when "1110" =>
|
dat_reg14 <= data_in;
|
dat_reg14 <= data_in;
|
when "1111" =>
|
when "1111" =>
|
dat_reg15 <= data_in;
|
dat_reg15 <= data_in;
|
when others =>
|
when others =>
|
null;
|
null;
|
end case;
|
end case;
|
end if;
|
end if;
|
end if;
|
end if;
|
end if;
|
end if;
|
end process;
|
end process;
|
|
|
dat_read : process( addr_hi,
|
dat_read : process( addr_hi,
|
dat_reg0, dat_reg1, dat_reg2, dat_reg3,
|
dat_reg0, dat_reg1, dat_reg2, dat_reg3,
|
dat_reg4, dat_reg5, dat_reg6, dat_reg7,
|
dat_reg4, dat_reg5, dat_reg6, dat_reg7,
|
dat_reg8, dat_reg9, dat_reg10, dat_reg11,
|
dat_reg8, dat_reg9, dat_reg10, dat_reg11,
|
dat_reg12, dat_reg13, dat_reg14, dat_reg15 )
|
dat_reg12, dat_reg13, dat_reg14, dat_reg15 )
|
variable phy_addr : std_logic_vector( 7 downto 0 );
|
variable phy_addr : std_logic_vector( 7 downto 0 );
|
begin
|
begin
|
case addr_hi is
|
case addr_hi is
|
when "0000" =>
|
when "0000" =>
|
phy_addr := dat_reg0;
|
phy_addr := dat_reg0;
|
when "0001" =>
|
when "0001" =>
|
phy_addr := dat_reg1;
|
phy_addr := dat_reg1;
|
when "0010" =>
|
when "0010" =>
|
phy_addr := dat_reg2;
|
phy_addr := dat_reg2;
|
when "0011" =>
|
when "0011" =>
|
phy_addr := dat_reg3;
|
phy_addr := dat_reg3;
|
when "0100" =>
|
when "0100" =>
|
phy_addr := dat_reg4;
|
phy_addr := dat_reg4;
|
when "0101" =>
|
when "0101" =>
|
phy_addr := dat_reg5;
|
phy_addr := dat_reg5;
|
when "0110" =>
|
when "0110" =>
|
phy_addr := dat_reg6;
|
phy_addr := dat_reg6;
|
when "0111" =>
|
when "0111" =>
|
phy_addr := dat_reg7;
|
phy_addr := dat_reg7;
|
when "1000" =>
|
when "1000" =>
|
phy_addr := dat_reg8;
|
phy_addr := dat_reg8;
|
when "1001" =>
|
when "1001" =>
|
phy_addr := dat_reg9;
|
phy_addr := dat_reg9;
|
when "1010" =>
|
when "1010" =>
|
phy_addr := dat_reg10;
|
phy_addr := dat_reg10;
|
when "1011" =>
|
when "1011" =>
|
phy_addr := dat_reg11;
|
phy_addr := dat_reg11;
|
when "1100" =>
|
when "1100" =>
|
phy_addr := dat_reg12;
|
phy_addr := dat_reg12;
|
when "1101" =>
|
when "1101" =>
|
phy_addr := dat_reg13;
|
phy_addr := dat_reg13;
|
when "1110" =>
|
when "1110" =>
|
phy_addr := dat_reg14;
|
phy_addr := dat_reg14;
|
when "1111" =>
|
when "1111" =>
|
phy_addr := dat_reg15;
|
phy_addr := dat_reg15;
|
when others =>
|
when others =>
|
null;
|
null;
|
end case;
|
end case;
|
data_out( 7 downto 4 ) <= phy_addr( 7 downto 4 );
|
data_out( 7 downto 4 ) <= phy_addr( 7 downto 4 );
|
data_out( 3 downto 0 ) <= not( phy_addr( 3 downto 0 ) );
|
data_out( 3 downto 0 ) <= not( phy_addr( 3 downto 0 ) );
|
|
|
end process;
|
end process;
|
|
|
end rtl;
|
end rtl;
|
|
|
|
|