OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [backend/] [altera_3c25_board/] [configure] - Diff between revs 105 and 141

Go to most recent revision | Only display areas with differences | Details | Blame | View Log

Rev 105 Rev 141
#!/bin/bash
#!/bin/bash
#new boards have to udpate this
#new boards have to udpate this
BOARD=altera_3c25_board                                         #this has to have the name of the directory this file is in
BOARD=altera_3c25_board                                         #this has to have the name of the directory this file is in
DEVICE_PART=EP3C25Q240C8
DEVICE_PART=EP3C25Q240C8
CONSTRAINT_FILE='altera_3c25_board.ucf'
CONSTRAINT_FILE='altera_3c25_board.ucf'
FAMILY_PART="Cyclone III"
FAMILY_PART="Cyclone III"
#~new boards update
#~new boards update
#system workings
#system workings
MINSOC_DIR=`pwd`/../..
MINSOC_DIR=`pwd`/../..
BACKEND_DIR=$MINSOC_DIR/backend
BACKEND_DIR=$MINSOC_DIR/backend
SYN_DIR=$MINSOC_DIR/syn
SYN_DIR=$MINSOC_DIR/syn
SYNSRC_DIR=$MINSOC_DIR/prj/altera
SYNSRC_DIR=$MINSOC_DIR/prj/altera
SYNSUPPORT_DIR=$SYN_DIR/buildSupport
SYNSUPPORT_DIR=$SYN_DIR/buildSupport
MAKEFILE_DIR=$SYN_DIR/altera
MAKEFILE_DIR=$SYN_DIR/altera
PROJECT_FILE=minsoc_top.qsf
PROJECT_FILE=minsoc_top.qsf
 
 
SYN_FILES=(adbg_top.prj jtag_top.prj or1200_top.prj uart_top.prj minsoc_top.prj altera_virtual_jtag.prj)
SYN_FILES=(adbg_top.vprj jtag_top.vprj or1200_top.vprj uart_top.vprj minsoc_top.vprj altera_virtual_jtag.vhdprj)
MAKEFILE=Makefile
MAKEFILE=Makefile
FIND_PART='DEVICE_PART'
FIND_PART='DEVICE_PART'
FIND_FAMILY='FAMILY_PART'
FIND_FAMILY='FAMILY_PART'
FIND_VERSION='SW_VERSION'
FIND_VERSION='SW_VERSION'
FIND_CONSTRAINT='CONSTRAINT_FILE'
FIND_CONSTRAINT='CONSTRAINT_FILE'
BOARD_DIR=$BACKEND_DIR/$BOARD
BOARD_DIR=$BACKEND_DIR/$BOARD
BOARD_FILES=(board.h orp.ld minsoc_defines.v minsoc_bench_defines.v gcc-opt.mk $CONSTRAINT_FILE)
BOARD_FILES=(board.h orp.ld minsoc_defines.v minsoc_bench_defines.v gcc-opt.mk $CONSTRAINT_FILE)
in_minsoc=`pwd | grep minsoc/backend/${BOARD}$`
in_minsoc=`pwd | grep minsoc/backend/${BOARD}$`
if [ -z $in_minsoc ]
if [ -z $in_minsoc ]
then
then
        echo ""
        echo ""
        echo "                  !!!WARNING!!!"
        echo "                  !!!WARNING!!!"
        echo "This script cannot be run if not in a board directory inside minsoc/backend,"
        echo "This script cannot be run if not in a board directory inside minsoc/backend,"
        echo "because it relies on the directory structure of the minsoc system."
        echo "because it relies on the directory structure of the minsoc system."
        echo ""
        echo ""
        echo "Possibly your minsoc directory is named differently, minsoc_trunk for example."
        echo "Possibly your minsoc directory is named differently, minsoc_trunk for example."
        echo "Its name must be minsoc only."
        echo "Its name must be minsoc only."
        echo ""
        echo ""
        exit 1
        exit 1
fi
fi
echo ""
echo ""
echo "This script sets up the SoC for simulations and synthesis."
echo "This script sets up the SoC for simulations and synthesis."
echo ""
echo ""
echo "In order to do so, SoC board's specific files for firmware compilation, "
echo "In order to do so, SoC board's specific files for firmware compilation, "
echo "testbench generation and synthesis are configured."
echo "testbench generation and synthesis are configured."
echo "Firmware and testbench looks for board specific files under $BACKEND_DIR."
echo "Firmware and testbench looks for board specific files under $BACKEND_DIR."
echo "Synthesis work under $SYN_DIR."
echo "Synthesis work under $SYN_DIR."
echo ""
echo ""
echo ""
echo ""
 
 
 
echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
 
echo "__________________________________________________________________________"
 
echo ""
 
for file in "${BOARD_FILES[@]}"
 
do
 
    if [ $file != NONE ]
 
    then
 
        echo "Copying $file, to backend directory..."
 
        cp $BOARD_DIR/$file $BACKEND_DIR
 
    fi
 
done
 
 
echo "Generating project files for simulation and synthesis..."
echo "Generating project files for simulation and synthesis..."
 
echo "__________________________________________________________________________"
 
echo ""
make -C $MINSOC_DIR/prj
make -C $MINSOC_DIR/prj
echo "Generation complete."
echo "Generation complete."
echo "__________________________________________________________________________"
echo ""
echo ""
echo ""
if [ $CONSTRAINT_FILE == 'NONE' ]
if [ $CONSTRAINT_FILE == 'NONE' ]
then
then
    echo "Skipping synthesis preparation. Standard implementation can only be simulated."
    echo "Skipping synthesis preparation. Standard implementation can only be simulated."
 
    echo ""
 
    echo ""
else
else
    echo "Device part and family for files under $SYNSRC_DIR will patched and stored "
    echo "Device part and family for files under $SYNSRC_DIR will patched and stored "
    echo "temporarily."
    echo "temporarily."
    echo "Afterwards, they are copied to $SYNSUPPORT_DIR."
    echo "Afterwards, they are copied to $SYNSUPPORT_DIR."
    echo "__________________________________________________________________________"
    echo "__________________________________________________________________________"
    echo ""
    echo ""
    sed "s/$FIND_PART/$DEVICE_PART/g" $MAKEFILE_DIR/$PROJECT_FILE > TMPFILE
    sed "s/$FIND_PART/$DEVICE_PART/g" $MAKEFILE_DIR/$PROJECT_FILE > TMPFILE
    sed "s/$FIND_FAMILY/$FAMILY_PART/g" TMPFILE > TMPFILE2
    sed "s/$FIND_FAMILY/$FAMILY_PART/g" TMPFILE > TMPFILE2
    #sed "s/$FIND_VERSION/$SW_VERSION/g" TMPFILE> TMPFILE
    #sed "s/$FIND_VERSION/$SW_VERSION/g" TMPFILE> TMPFILE
    echo "Adding settings from constraint file..."
    echo "Adding settings from constraint file..."
    cat $CONSTRAINT_FILE >> TMPFILE2
    cat $CONSTRAINT_FILE >> TMPFILE2
    echo "Generating quartus settings from prj files in $SYNSRC_DIR"
    echo "Generating quartus settings from prj files in $SYNSRC_DIR"
    for file in "${SYN_FILES[@]}"
    for file in "${SYN_FILES[@]}"
    do
    do
        echo "Adding settings from file $file..."
        echo "Adding settings from file $file..."
        cat $SYNSRC_DIR/$file >> TMPFILE2
        cat $SYNSRC_DIR/$file >> TMPFILE2
    done
    done
    mv TMPFILE2 $SYNSUPPORT_DIR/$PROJECT_FILE
    mv TMPFILE2 $SYNSUPPORT_DIR/$PROJECT_FILE
    rm TMPFILE
    rm TMPFILE
    echo ""
    echo ""
    echo "Generated quartus settings file in $SYNSUPPORT_DIR/$PROJECT_FILE"
    echo "Generated quartus settings file in $SYNSUPPORT_DIR/$PROJECT_FILE"
    echo ""
    echo ""
    echo "Copying Makefile from $MAKEFILE_DIR to synthesis directory, $SYN_DIR..."
    echo "Copying Makefile from $MAKEFILE_DIR to synthesis directory, $SYN_DIR..."
    cp $MAKEFILE_DIR/$MAKEFILE $SYN_DIR/$MAKEFILE
    cp $MAKEFILE_DIR/$MAKEFILE $SYN_DIR/$MAKEFILE
    cp $MAKEFILE_DIR/setup.bat $SYN_DIR/setup.bat
    cp $MAKEFILE_DIR/setup.bat $SYN_DIR/setup.bat
 
    echo "For synthesis help go to $SYN_DIR and type \"make\"."
    echo ""
    echo ""
 
 
    echo "Copying board specific SoC files from $BOARD_DIR to $BACKEND_DIR directory."
 
    echo "__________________________________________________________________________"
 
    echo ""
    echo ""
    for file in "${BOARD_FILES[@]}"
 
    do
 
        if [ $file != NONE ]
 
        then
 
            echo "Copying $file, to backend directory..."
 
            cp $BOARD_DIR/$file $BACKEND_DIR
 
        fi
 
    done
 
    echo ""
 
    echo "Configuration done."
 
    echo "For synthesis help go to $SYN_DIR and type \"make\"."
 
fi
fi
 
 
 
echo "Configuration done."
 
 

powered by: WebSVN 2.1.0

© copyright 1999-2020 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.