OpenCores
URL https://opencores.org/ocsvn/openarty/openarty/trunk

Subversion Repositories openarty

[/] [openarty/] [trunk/] [rtl/] [cpu/] [memops.v] - Diff between revs 49 and 50

Show entire file | Details | Blame | View Log

Rev 49 Rev 50
Line 1... Line 1...
///////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
//
//
// Filename:    memops.v
// Filename:    memops.v
//
//
// Project:     Zip CPU -- a small, lightweight, RISC CPU soft core
// Project:     Zip CPU -- a small, lightweight, RISC CPU soft core
//
//
Line 15... Line 15...
//              error signal).
//              error signal).
//
//
// Creator:     Dan Gisselquist, Ph.D.
// Creator:     Dan Gisselquist, Ph.D.
//              Gisselquist Technology, LLC
//              Gisselquist Technology, LLC
//
//
///////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
//
//
// Copyright (C) 2015, Gisselquist Technology, LLC
// Copyright (C) 2015,2017, Gisselquist Technology, LLC
//
//
// This program is free software (firmware): you can redistribute it and/or
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of  the GNU General Public License as published
// modify it under the terms of  the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
// your option) any later version.
Line 29... Line 29...
// This program is distributed in the hope that it will be useful, but WITHOUT
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
// for more details.
//
//
 
// You should have received a copy of the GNU General Public License along
 
// with this program.  (It's in the $(ROOT)/doc directory.  Run make with no
 
// target there if the PDF file isn't present.)  If not, see
 
// <http://www.gnu.org/licenses/> for a copy.
 
//
// License:     GPL, v3, as defined and found on www.gnu.org,
// License:     GPL, v3, as defined and found on www.gnu.org,
//              http://www.gnu.org/licenses/gpl.html
//              http://www.gnu.org/licenses/gpl.html
//
//
//
//
///////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
 
//
//
//
module  memops(i_clk, i_rst, i_stb, i_lock,
module  memops(i_clk, i_rst, i_stb, i_lock,
                i_op, i_addr, i_data, i_oreg,
                i_op, i_addr, i_data, i_oreg,
                        o_busy, o_valid, o_err, o_wreg, o_result,
                        o_busy, o_valid, o_err, o_wreg, o_result,
                o_wb_cyc_gbl, o_wb_cyc_lcl,
                o_wb_cyc_gbl, o_wb_cyc_lcl,
                        o_wb_stb_gbl, o_wb_stb_lcl,
                        o_wb_stb_gbl, o_wb_stb_lcl,
                        o_wb_we, o_wb_addr, o_wb_data,
                        o_wb_we, o_wb_addr, o_wb_data, o_wb_sel,
                i_wb_ack, i_wb_stall, i_wb_err, i_wb_data);
                i_wb_ack, i_wb_stall, i_wb_err, i_wb_data);
        parameter       ADDRESS_WIDTH=32, IMPLEMENT_LOCK=0;
        parameter       ADDRESS_WIDTH=30, IMPLEMENT_LOCK=0, WITH_LOCAL_BUS=0;
        localparam      AW=ADDRESS_WIDTH;
        localparam      AW=ADDRESS_WIDTH;
        input                   i_clk, i_rst;
        input                   i_clk, i_rst;
        input                   i_stb, i_lock;
        input                   i_stb, i_lock;
        // CPU interface
        // CPU interface
        input                   i_op;
        input           [2:0]    i_op;
        input           [31:0]   i_addr;
        input           [31:0]   i_addr;
        input           [31:0]   i_data;
        input           [31:0]   i_data;
        input           [4:0]    i_oreg;
        input           [4:0]    i_oreg;
        // CPU outputs
        // CPU outputs
        output  wire            o_busy;
        output  wire            o_busy;
Line 65... Line 71...
        output  wire            o_wb_cyc_lcl;
        output  wire            o_wb_cyc_lcl;
        output  reg             o_wb_stb_lcl;
        output  reg             o_wb_stb_lcl;
        output  reg             o_wb_we;
        output  reg             o_wb_we;
        output  reg     [(AW-1):0]       o_wb_addr;
        output  reg     [(AW-1):0]       o_wb_addr;
        output  reg     [31:0]   o_wb_data;
        output  reg     [31:0]   o_wb_data;
 
        output  reg     [3:0]    o_wb_sel;
        // Wishbone inputs
        // Wishbone inputs
        input                   i_wb_ack, i_wb_stall, i_wb_err;
        input                   i_wb_ack, i_wb_stall, i_wb_err;
        input           [31:0]   i_wb_data;
        input           [31:0]   i_wb_data;
 
 
        reg     r_wb_cyc_gbl, r_wb_cyc_lcl;
        reg     r_wb_cyc_gbl, r_wb_cyc_lcl;
        wire    gbl_stb, lcl_stb;
        wire    gbl_stb, lcl_stb;
        assign  lcl_stb = (i_stb)&&(i_addr[31:24]==8'hff);
        assign  lcl_stb = (i_stb)&&(WITH_LOCAL_BUS!=0)&&(i_addr[31:24]==8'hff);
        assign  gbl_stb = (i_stb)&&(i_addr[31:24]!=8'hff);
        assign  gbl_stb = (i_stb)&&((WITH_LOCAL_BUS==0)||(i_addr[31:24]!=8'hff));
 
 
        initial r_wb_cyc_gbl = 1'b0;
        initial r_wb_cyc_gbl = 1'b0;
        initial r_wb_cyc_lcl = 1'b0;
        initial r_wb_cyc_lcl = 1'b0;
        always @(posedge i_clk)
        always @(posedge i_clk)
                if (i_rst)
                if (i_rst)
Line 103... Line 110...
        always @(posedge i_clk)
        always @(posedge i_clk)
                if (o_wb_cyc_lcl)
                if (o_wb_cyc_lcl)
                        o_wb_stb_lcl <= (o_wb_stb_lcl)&&(i_wb_stall);
                        o_wb_stb_lcl <= (o_wb_stb_lcl)&&(i_wb_stall);
                else
                else
                        o_wb_stb_lcl  <= lcl_stb; // Grab wishbone on new operation
                        o_wb_stb_lcl  <= lcl_stb; // Grab wishbone on new operation
 
 
 
        reg     [3:0]    r_op;
        always @(posedge i_clk)
        always @(posedge i_clk)
                if (i_stb)
                if (i_stb)
                begin
                begin
                        o_wb_we   <= i_op;
                        o_wb_we   <= i_op[0];
                        o_wb_data <= i_data;
                        casez({ i_op[2:1], i_addr[1:0] })
                        o_wb_addr <= i_addr[(AW-1):0];
`ifdef  ZERO_ON_IDLE
 
                        4'b100?: o_wb_data <= { i_data[15:0], 16'h00 };
 
                        4'b101?: o_wb_data <= { 16'h00, i_data[15:0] };
 
                        4'b1100: o_wb_data <= {         i_data[7:0], 24'h00 };
 
                        4'b1101: o_wb_data <= {  8'h00, i_data[7:0], 16'h00 };
 
                        4'b1110: o_wb_data <= { 16'h00, i_data[7:0],  8'h00 };
 
                        4'b1111: o_wb_data <= { 24'h00, i_data[7:0] };
 
`else
 
                        4'b10??: o_wb_data <= { (2){ i_data[15:0] } };
 
                        4'b11??: o_wb_data <= { (4){ i_data[7:0] } };
 
`endif
 
                        default: o_wb_data <= i_data;
 
                        endcase
 
 
 
                        o_wb_addr <= i_addr[(AW+1):2];
 
`ifdef  SET_SEL_ON_READ
 
                        if (i_op[0] == 1'b0)
 
                                o_wb_sel <= 4'hf;
 
                        else
 
`endif
 
                        casez({ i_op[2:1], i_addr[1:0] })
 
                        4'b01??: o_wb_sel <= 4'b1111;
 
                        4'b100?: o_wb_sel <= 4'b1100;
 
                        4'b101?: o_wb_sel <= 4'b0011;
 
                        4'b1100: o_wb_sel <= 4'b1000;
 
                        4'b1101: o_wb_sel <= 4'b0100;
 
                        4'b1110: o_wb_sel <= 4'b0010;
 
                        4'b1111: o_wb_sel <= 4'b0001;
 
                        default: o_wb_sel <= 4'b1111;
 
                        endcase
 
                        r_op <= { i_op[2:1] , i_addr[1:0] };
 
                end
 
`ifdef  ZERO_ON_IDLE
 
                else if ((!o_wb_cyc_gbl)&&(!o_wb_cyc_lcl))
 
                begin
 
                        o_wb_we   <= 1'b0;
 
                        o_wb_addr <= 0;
 
                        o_wb_data <= 32'h0;
 
                        o_wb_sel  <= 4'h0;
                end
                end
 
`endif
 
 
        initial o_valid = 1'b0;
        initial o_valid = 1'b0;
        always @(posedge i_clk)
        always @(posedge i_clk)
                o_valid <= ((o_wb_cyc_gbl)||(o_wb_cyc_lcl))&&(i_wb_ack)&&(~o_wb_we);
                o_valid <= (!i_rst)&&((o_wb_cyc_gbl)||(o_wb_cyc_lcl))&&(i_wb_ack)&&(~o_wb_we);
        initial o_err = 1'b0;
        initial o_err = 1'b0;
        always @(posedge i_clk)
        always @(posedge i_clk)
                o_err <= ((o_wb_cyc_gbl)||(o_wb_cyc_lcl))&&(i_wb_err);
                o_err <= (!i_rst)&&((o_wb_cyc_gbl)||(o_wb_cyc_lcl))&&(i_wb_err);
        assign  o_busy = (o_wb_cyc_gbl)||(o_wb_cyc_lcl);
        assign  o_busy = (o_wb_cyc_gbl)||(o_wb_cyc_lcl);
 
 
        always @(posedge i_clk)
        always @(posedge i_clk)
                if (i_stb)
                if (i_stb)
                        o_wreg    <= i_oreg;
                        o_wreg    <= i_oreg;
        always @(posedge i_clk)
        always @(posedge i_clk)
                if (i_wb_ack)
`ifdef  ZERO_ON_IDLE
                        o_result <= i_wb_data;
                if (!i_wb_ack)
 
                        o_result <= 32'h0;
 
                else
 
`endif
 
                casez(r_op)
 
                4'b01??: o_result <= i_wb_data;
 
                4'b100?: o_result <= { 16'h00, i_wb_data[31:16] };
 
                4'b101?: o_result <= { 16'h00, i_wb_data[15: 0] };
 
                4'b1100: o_result <= { 24'h00, i_wb_data[31:24] };
 
                4'b1101: o_result <= { 24'h00, i_wb_data[23:16] };
 
                4'b1110: o_result <= { 24'h00, i_wb_data[15: 8] };
 
                4'b1111: o_result <= { 24'h00, i_wb_data[ 7: 0] };
 
                default: o_result <= i_wb_data;
 
                endcase
 
 
        generate
        generate
        if (IMPLEMENT_LOCK != 0)
        if (IMPLEMENT_LOCK != 0)
        begin
        begin
                reg     lock_gbl, lock_lcl;
                reg     lock_gbl, lock_lcl;

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.