#!/bin/bash
|
#!/bin/bash
|
|
|
# Copyright (C) 2008,2009 www.meansoffreedom.org, www.orsoc.se
|
# Copyright (C) 2008,2009 www.meansoffreedom.org, www.orsoc.se
|
# This file is free software; you can redistribute it and/or modify it
|
# This file is free software; you can redistribute it and/or modify it
|
# under the terms of the GNU General Public License as published by
|
# under the terms of the GNU General Public License as published by
|
# the Free Software Foundation; either version 2 of the License, or
|
# the Free Software Foundation; either version 2 of the License, or
|
# (at your option) any later version.
|
# (at your option) any later version.
|
#
|
#
|
# This program is distributed in the hope that it will be useful, but
|
# This program is distributed in the hope that it will be useful, but
|
# WITHOUT ANY WARRANTY; without even the implied warranty of
|
# WITHOUT ANY WARRANTY; without even the implied warranty of
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
# General Public License for more details.
|
# General Public License for more details.
|
#
|
#
|
# You should have received a copy of the GNU General Public License
|
# You should have received a copy of the GNU General Public License
|
# along with this program; if not, write to the Free Software
|
# along with this program; if not, write to the Free Software
|
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
|
##Date: 21/04/2009
|
##Date: 21/04/2009
|
##Title: MOF_ORSOC_TCN_v5b_or32-elf.sh
|
##Title: MOF_ORSOC_TCN_v5b_or32-elf.sh
|
##Purpose: Complete Toolchain Builder from MOF & ORSoC.
|
##Purpose: Complete Toolchain Builder from MOF & ORSoC.
|
##initial rgd, mse
|
##initial rgd, mse
|
##updated jb
|
##updated jb
|
|
|
#Changelog
|
#Changelog
|
# 090306 - jb
|
# 090306 - jb
|
# - added exit code checking after each make and patch
|
# - added exit code checking after each make and patch
|
# - changed download method to instead generate a script and run it in
|
# - changed download method to instead generate a script and run it in
|
# kermit (requiring single ftp logon per host)
|
# kermit (requiring single ftp logon per host)
|
# 090309 - jb
|
# 090309 - jb
|
# - changed download of GNU tools so they occurr from the GNU.org ftp
|
# - changed download of GNU tools so they occurr from the GNU.org ftp
|
# (except binutils-2.18.50, it's not there)
|
# (except binutils-2.18.50, it's not there)
|
# - changed download of Linux kernel so it's now from ftp.kernel.org
|
# - changed download of Linux kernel so it's now from ftp.kernel.org
|
# - changed patch for binutils (fixes gcc-4.3.2 compilation problem
|
# - changed patch for binutils (fixes gcc-4.3.2 compilation problem
|
# caused by non-string literals in printf)
|
# caused by non-string literals in printf)
|
# - changed or1ksim version from 0.3.0rc2 to 0.3.0
|
# - changed or1ksim version from 0.3.0rc2 to 0.3.0
|
# - changed Linux kernel version from 2.6.19 to 2.6.24
|
# - changed Linux kernel version from 2.6.19 to 2.6.24
|
# - changed Linux kernel patch version for this new kernel version
|
# - changed Linux kernel patch version for this new kernel version
|
# generated new patch for Linux kernel, based on one from MOF
|
# generated new patch for Linux kernel, based on one from MOF
|
# (www.meansoffreedom.net) which contains a more complete config file.
|
# (www.meansoffreedom.net) which contains a more complete config file.
|
# removing need for user input during "make oldconfig"
|
# removing need for user input during "make oldconfig"
|
# - changed organisation so that all the packages are not copied into
|
# - changed organisation so that all the packages are not copied into
|
# the build directory before they are extracted, instead it's done
|
# the build directory before they are extracted, instead it's done
|
# from where they are.
|
# from where they are.
|
# - changed gdb-6.8 patch version due to stricter gcc-4.3.2 checking
|
# - changed gdb-6.8 patch version due to stricter gcc-4.3.2 checking
|
# return types.
|
# return types.
|
# - included better or1ksim config file in Linux sources patch, now
|
# - included better or1ksim config file in Linux sources patch, now
|
# named "or1ksim_linux.cfg"
|
# named "or1ksim_linux.cfg"
|
# 100309 - jb
|
# 100309 - jb
|
# - changed back to wget for file retrieval
|
# - changed back to wget for file retrieval
|
# - changed introduction readme
|
# - changed introduction readme
|
# - changed install destination checking and setup
|
# - changed install destination checking and setup
|
# - added md5sum checking of any existing downloaded files, removing
|
# - added md5sum checking of any existing downloaded files, removing
|
# need for redownloading things every time
|
# need for redownloading things every time
|
# - added debug build mode - run script with -d at command line
|
# - added debug build mode - run script with -d at command line
|
# note: not everything in this mode has been tested, may not work
|
# note: not everything in this mode has been tested, may not work
|
# in certain combinations!
|
# in certain combinations!
|
# 120309 - jb
|
# 120309 - jb
|
# - New OS X version - busybox doesn't work (removed from script),
|
# - New OS X version - busybox doesn't work (removed from script),
|
# nor does ors1ksim (compiles but segfaults somewhere during test).
|
# nor does ors1ksim (compiles but segfaults somewhere during test).
|
# 140309 - Added ability to change target name. Included some sed commands to
|
# 140309 - Added ability to change target name. Included some sed commands to
|
# change or32-uclinux to whatever $TARGET is set to in some scripts
|
# change or32-uclinux to whatever $TARGET is set to in some scripts
|
# (mainly for uClibc install, the are set at configure time)
|
# (mainly for uClibc install, the are set at configure time)
|
# 160309 - (v5a) Replaced busybox sources in download list (removed for OS X
|
# 160309 - (v5a) Replaced busybox sources in download list (removed for OS X
|
# version and forgot to replace it when running on Linux again.)
|
# version and forgot to replace it when running on Linux again.)
|
# 270309 - Changed the declaration of the check_exit_code function to be without
|
# 270309 - Changed the declaration of the check_exit_code function to be without
|
# the preceeding "function" as this isn't valid in sh, and the new way
|
# the preceeding "function" as this isn't valid in sh, and the new way
|
# appears to be valid in bash.
|
# appears to be valid in bash.
|
# - Changed the link in the error output to the new OpenCores forum.
|
# - Changed the link in the error output to the new OpenCores forum.
|
# 210409 - Changed linux kernel and uClibc patch versions to latest
|
# 210409 - Changed linux kernel and uClibc patch versions to latest
|
# - Changed output to all be piped to appropriate files, makes things neater
|
# - Changed output to all be piped to appropriate files, makes things neater
|
|
|
# TODO: OS X build things - need an "elf.h" from some Linux machine's
|
# TODO: OS X build things - need an "elf.h" from some Linux machine's
|
# /usr/local/include dir and put in Mac's /usr/local/include dir -
|
# /usr/local/include dir and put in Mac's /usr/local/include dir -
|
# this solves issue with Linux compilation
|
# this solves issue with Linux compilation
|
# TODO: OS X build things - add HOST_LOADLIBES="lintl" to make line of uClibc
|
# TODO: OS X build things - add HOST_LOADLIBES="lintl" to make line of uClibc
|
# TODO: OS X build things - must remove the -Werror line in $GDB_VER/gdb/Makefile,
|
# TODO: OS X build things - must remove the -Werror line in $GDB_VER/gdb/Makefile,
|
# sed command:
|
# sed command:
|
# sed 's/WERROR\_CFLAGS\ \=\ \-Werror/WERROR\_CFLAGS\ \=/' $GDB_VER/gdb/Makefile
|
# sed 's/WERROR\_CFLAGS\ \=\ \-Werror/WERROR\_CFLAGS\ \=/' $GDB_VER/gdb/Makefile
|
# Can also just change the gdb-6.8/gdb/Makefile.in and remove the Werror= thing
|
# Can also just change the gdb-6.8/gdb/Makefile.in and remove the Werror= thing
|
# TODO: OS X build things - or1ksim, in or1ksim-0.3.0/peripheral/atadevice.c, it
|
# TODO: OS X build things - or1ksim, in or1ksim-0.3.0/peripheral/atadevice.c, it
|
# includes byteswap.h - actually it's abstract.h that defines #LE_16() bswap_16(),
|
# includes byteswap.h - actually it's abstract.h that defines #LE_16() bswap_16(),
|
# so in abstract.h we put in defines for bswap_16 as
|
# so in abstract.h we put in defines for bswap_16 as
|
# #define bswap_16(value) ((((value) & 0xff) << 8) | ((value) >> 8))
|
# #define bswap_16(value) ((((value) & 0xff) << 8) | ((value) >> 8))
|
# TODO: OS X Build things - or1ksim strndup.c, in or1k-0.3.0/port/strndup.c strndup function,
|
# TODO: OS X Build things - or1ksim strndup.c, in or1k-0.3.0/port/strndup.c strndup function,
|
# types not exist etc. Need to include sys/types.h and string.h to this file to fix
|
# types not exist etc. Need to include sys/types.h and string.h to this file to fix
|
# a few problems.
|
# a few problems.
|
# TODO: OS X build things - or1ksim - or1ksim-0.3.0/sim-cmd.c passes one of our functions
|
# TODO: OS X build things - or1ksim - or1ksim-0.3.0/sim-cmd.c passes one of our functions
|
# to a readline function, rl_event_hook, but this is not defined in the OS X (BSD)
|
# to a readline function, rl_event_hook, but this is not defined in the OS X (BSD)
|
# readline package, so the GNU readline package must be used.
|
# readline package, so the GNU readline package must be used.
|
# TODO: OS X build things - or1ksim segfaults when run for some reason.
|
# TODO: OS X build things - or1ksim segfaults when run for some reason.
|
|
|
## A function we'll call throughout the setup process to check if the previous
|
## A function we'll call throughout the setup process to check if the previous
|
## command finished without error
|
## command finished without error
|
function check_exit_code {
|
check_exit_code()
|
|
{
|
if [ $? -ne 0 ]
|
if [ $? -ne 0 ]
|
then
|
then
|
echo
|
echo
|
echo "############################ERROR#############################"
|
echo "############################ERROR#############################"
|
echo
|
echo
|
echo "Error during toolchain installation."
|
echo "Error during toolchain installation."
|
echo
|
echo
|
echo "Please report this to the script maintainers."
|
echo "Please report this to the script maintainers."
|
echo
|
echo
|
echo "A useful report would contain information such as the module"
|
echo "A useful report would contain information such as the module"
|
echo "buing built/\"make\"ed when the error occurred (relevant lines"
|
echo "buing built/\"make\"ed when the error occurred (relevant lines"
|
echo "of console output), the version of GCC on the host system used"
|
echo "of console output), the version of GCC on the host system used"
|
echo "to compile (gcc --version), linux distro and version, etc."
|
echo "to compile (gcc --version), linux distro and version, etc."
|
echo "A good place to post this information is on the OpenCores"
|
echo "A good place to post this information is on the OpenCores"
|
echo "forum for the OpenRISC project: "
|
echo "forum for the OpenRISC project: "
|
echo "http://opencores.org/?do=forum"
|
echo "http://opencores.org/?do=forum"
|
echo
|
echo
|
exit $?
|
exit $?
|
fi
|
fi
|
}
|
}
|
|
|
## SCRIPT VERSION ##
|
## SCRIPT VERSION ##
|
SCRIPT_VERSION="v5b"
|
SCRIPT_VERSION="v5b"
|
|
|
## Beginning globals ##
|
## Beginning globals ##
|
|
|
## ORSoC FTP download settings ##
|
## ORSoC FTP download settings ##
|
ORSOC_FTP_HOST="195.67.9.12"
|
ORSOC_FTP_HOST="195.67.9.12"
|
ORSOC_FTP_USER="ocuser"
|
ORSOC_FTP_USER="ocuser"
|
ORSOC_FTP_PASSWD="oc"
|
ORSOC_FTP_PASSWD="oc"
|
ORSOC_FTP_DIR="toolchain"
|
ORSOC_FTP_DIR="toolchain"
|
|
|
## GNU FTP download settings ##
|
## GNU FTP download settings ##
|
GNU_FTP_HOST="ftp.gnu.org"
|
GNU_FTP_HOST="ftp.gnu.org"
|
GNU_FTP_USER="anonymous"
|
GNU_FTP_USER="anonymous"
|
#GNU_FTP_BINUTILS_DIR="gnu/binutils"
|
#GNU_FTP_BINUTILS_DIR="gnu/binutils"
|
GNU_FTP_GCC_DIR="gnu/gcc/gcc-4.2.2"
|
GNU_FTP_GCC_DIR="gnu/gcc/gcc-4.2.2"
|
GNU_FTP_GDB_DIR="gnu/gdb"
|
GNU_FTP_GDB_DIR="gnu/gdb"
|
|
|
## Linux kernel download settings ##
|
## Linux kernel download settings ##
|
KERNEL_FTP_HOST="ftp.kernel.org"
|
KERNEL_FTP_HOST="ftp.kernel.org"
|
KERNEL_FTP_USER="anonymous"
|
KERNEL_FTP_USER="anonymous"
|
KERNEL_FTP_PASSWD="anonymous"
|
KERNEL_FTP_PASSWD="anonymous"
|
KERNEL_FTP_DIR="pub/linux/kernel/v2.6"
|
KERNEL_FTP_DIR="pub/linux/kernel/v2.6"
|
|
|
## Local directory variables ##
|
## Local directory variables ##
|
START_DIR=`pwd`
|
START_DIR=`pwd`
|
DN="n"
|
DN="n"
|
DIR=`pwd`
|
DIR=`pwd`
|
|
|
## Versions of the toolchain components ##
|
## Versions of the toolchain components ##
|
BINUTILS_VER=binutils-2.18.50
|
BINUTILS_VER=binutils-2.18.50
|
GCC_VER=gcc-4.2.2
|
GCC_VER=gcc-4.2.2
|
GDB_VER=gdb-6.8
|
GDB_VER=gdb-6.8
|
UCLIB_VER=uClibc-0.9.29
|
UCLIB_VER=uClibc-0.9.29
|
LINUX_VER=linux-2.6.24
|
LINUX_VER=linux-2.6.24
|
BUSY_VER=busybox-1.7.5
|
BUSY_VER=busybox-1.7.5
|
SIM_VER=or1ksim-0.3.0
|
SIM_VER=or1ksim-0.3.0
|
|
|
## Patches ##
|
## Patches ##
|
BINUTILS_PATCH="$BINUTILS_VER.or32_fixed_patch-v2.0.bz2"
|
BINUTILS_PATCH="$BINUTILS_VER.or32_fixed_patch-v2.0.bz2"
|
GCC_PATCH=$GCC_VER.or32patch.bz2
|
GCC_PATCH=$GCC_VER.or32patch.bz2
|
LINUX_PATCH="linux_2.6.24_or32_unified_v2.2.bz2" ## New version, changed rgd_dot_config in root, changed or1ksim config file name and contents##
|
LINUX_PATCH="linux_2.6.24_or32_unified_v2.2.bz2" ## New version, changed rgd_dot_config in root, changed or1ksim config file name and contents##
|
UCLIBC_PATCH="uClibc-0.9.29-or32-patch-1.0.bz2"
|
UCLIBC_PATCH="uClibc-0.9.29-or32-patch-1.0.bz2"
|
GDB_PATCH="or32-gdb-6.8-patch-2.4.bz2"
|
GDB_PATCH="or32-gdb-6.8-patch-2.4.bz2"
|
|
|
## MD5sum file ##
|
## MD5sum file ##
|
MD5SUM_FILE=md5sums
|
MD5SUM_FILE=md5sums
|
|
|
## Configs ##
|
## Configs ##
|
#CONFIG1="rgd_uc_29dotconfig" ## Now changed to rgd_uc_29v5dotconfig as it uses paths to the 2.6.24 kernel ##
|
#CONFIG1="rgd_uc_29dotconfig" ## Now changed to rgd_uc_29v5dotconfig as it uses paths to the 2.6.24 kernel ##
|
CONFIG1="rgd_uc_29v5dotconfig"
|
CONFIG1="rgd_uc_29v5dotconfig"
|
CONFIG2="rgd_bb_1.75dotconfig"
|
CONFIG2="rgd_bb_1.75dotconfig"
|
|
|
## Ramdisk name ##
|
## Ramdisk name ##
|
RAMDISK_FILE=initrd-fb-03.ext2.last.work.1.7.5
|
RAMDISK_FILE=initrd-fb-03.ext2.last.work.1.7.5
|
LINUX_RAMDISK_FILE=arch/or32/support/initrd-fb-03.ext2 ## The location and name of the ramdisk that Linux wants when it compiles
|
LINUX_RAMDISK_FILE=arch/or32/support/initrd-fb-03.ext2 ## The location and name of the ramdisk that Linux wants when it compiles
|
|
|
## Toolchain prefix ##
|
## Toolchain prefix ##
|
TARGET=or32-elf
|
TARGET=or32-elf
|
|
|
|
|
## Tarballs ##
|
## Tarballs ##
|
ZBALL1=$BINUTILS_VER.tar.bz2
|
ZBALL1=$BINUTILS_VER.tar.bz2
|
TBALL1=$BINUTILS_VER.tar
|
TBALL1=$BINUTILS_VER.tar
|
ZBALL2=$GCC_VER.tar.bz2
|
ZBALL2=$GCC_VER.tar.bz2
|
TBALL2=$GCC_VER.tar
|
TBALL2=$GCC_VER.tar
|
ZBALL3=$UCLIB_VER.tar.bz2
|
ZBALL3=$UCLIB_VER.tar.bz2
|
TBALL3=$UCLIB_VER.tar
|
TBALL3=$UCLIB_VER.tar
|
ZBALL4=$LINUX_VER.tar.bz2
|
ZBALL4=$LINUX_VER.tar.bz2
|
TBALL4=$LINUX_VER.tar
|
TBALL4=$LINUX_VER.tar
|
ZBALL5=$BUSY_VER.tar.bz2
|
ZBALL5=$BUSY_VER.tar.bz2
|
TBALL5=$BUSY_VER.tar
|
TBALL5=$BUSY_VER.tar
|
ZBALL6=$SIM_VER.tar.bz2
|
ZBALL6=$SIM_VER.tar.bz2
|
TBALL6=$SIM_VER.tar
|
TBALL6=$SIM_VER.tar
|
ZBALL7=$RAMDISK_FILE.bz2
|
ZBALL7=$RAMDISK_FILE.bz2
|
ZBALL8=$GDB_VER.tar.bz2
|
ZBALL8=$GDB_VER.tar.bz2
|
TBALL8=$GDB_VER.tar
|
TBALL8=$GDB_VER.tar
|
|
|
ORSOC_FTP_FILE_LIST="$ZBALL1
|
ORSOC_FTP_FILE_LIST="$ZBALL1
|
$ZBALL3
|
$ZBALL3
|
$ZBALL5
|
$ZBALL5
|
$ZBALL6
|
$ZBALL6
|
$ZBALL7
|
$ZBALL7
|
$BINUTILS_PATCH
|
$BINUTILS_PATCH
|
$GCC_PATCH
|
$GCC_PATCH
|
$LINUX_PATCH
|
$LINUX_PATCH
|
$UCLIBC_PATCH
|
$UCLIBC_PATCH
|
$GDB_PATCH
|
$GDB_PATCH
|
$CONFIG1
|
$CONFIG1
|
$CONFIG2"
|
$CONFIG2"
|
|
|
GNU_FTP_FILE_LIST="$ZBALL2
|
GNU_FTP_FILE_LIST="$ZBALL2
|
$ZBALL8"
|
$ZBALL8"
|
|
|
KERNEL_FTP_FILE_LIST=$ZBALL4
|
KERNEL_FTP_FILE_LIST=$ZBALL4
|
|
|
|
|
|
|
##Welcome message
|
##Welcome message
|
echo
|
echo
|
echo "The OpenRISC toolchain install script - Provided by ORSoC & MeansOfFreedom.net"
|
echo "The OpenRISC toolchain install script - Provided by ORSoC & MeansOfFreedom.net"
|
echo "Version $SCRIPT_VERSION"
|
echo "Version $SCRIPT_VERSION"
|
echo
|
echo
|
echo "#####################################README#####################################"
|
echo "#####################################README#####################################"
|
echo
|
echo
|
echo "This script will install tools required for development on the OpenRISC platform"
|
echo "This script will install tools required for development on the OpenRISC platform"
|
echo "This version ($SCRIPT_VERSION) includes: "
|
echo "This version ($SCRIPT_VERSION) includes: "
|
echo " $GCC_VER, $BINUTILS_VER, $UCLIB_VER"
|
echo " $GCC_VER, $BINUTILS_VER, $UCLIB_VER"
|
echo " $LINUX_VER, $GDB_VER, $BUSY_VER and $SIM_VER"
|
echo " $LINUX_VER, $GDB_VER, $BUSY_VER and $SIM_VER"
|
echo
|
echo
|
echo "Please follow the prompts to select the install location."
|
echo "Please follow the prompts to select the install location."
|
echo
|
echo
|
echo "Note: Two new directories, or32-build and or32-download, will be created in the"
|
echo "Note: Two new directories, or32-build and or32-download, will be created in the"
|
echo "current directory for storing downloaded files and building the tools."
|
echo "current directory for storing downloaded files and building the tools."
|
echo "Also: This script attempts to mount a ramdisk image in a local directory to copy"
|
echo "Also: This script attempts to mount a ramdisk image in a local directory to copy"
|
echo "in the freshly built busybox. This requires root user privileges - if they are"
|
echo "in the freshly built busybox. This requires root user privileges - if they are"
|
echo "not deteceted the existing busybox binaries will remain in the ramdisk image."
|
echo "not deteceted the existing busybox binaries will remain in the ramdisk image."
|
echo
|
echo
|
echo "#####################################README#####################################"
|
echo "#####################################README#####################################"
|
echo
|
echo
|
|
|
echo "Install the toolchain under current directory?"
|
echo "Install the toolchain under current directory?"
|
echo "Current directory: [$DIR]"
|
echo "Current directory: [$DIR]"
|
echo "Tools will be installed in [$DIR/$TARGET]"
|
echo "Tools will be installed in [$DIR/$TARGET]"
|
echo [Y/n]:
|
echo [Y/n]:
|
read YN
|
read YN
|
|
|
## $YN will be zero length string if user just pressed enter ##
|
## $YN will be zero length string if user just pressed enter ##
|
if [ -z $YN ]
|
if [ -z $YN ]
|
then
|
then
|
VAL="y"
|
VAL="y"
|
else
|
else
|
VAL=$(echo $YN | tr [:upper:] [:lower:])
|
VAL=$(echo $YN | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
if [ $VAL = "n" ]
|
if [ $VAL = "n" ]
|
then
|
then
|
# Optional install path
|
# Optional install path
|
echo "Enter the path the toolchain will be installed in:"
|
echo "Enter the path the toolchain will be installed in:"
|
read DIR
|
read DIR
|
|
|
# Check if the path exists and ask the user to verify it
|
# Check if the path exists and ask the user to verify it
|
until [ $DN = "y" ]
|
until [ $DN = "y" ]
|
do
|
do
|
|
|
#Check the path exists
|
#Check the path exists
|
if [ -d $DIR ]
|
if [ -d $DIR ]
|
then
|
then
|
# The path entered is OK
|
# The path entered is OK
|
echo "Chosen directory is [$DIR]"
|
echo "Chosen directory is [$DIR]"
|
echo "Tools will be installed in [$DIR/$TARGET]"
|
echo "Tools will be installed in [$DIR/$TARGET]"
|
echo "[y/n]:"
|
echo "[y/n]:"
|
read DN
|
read DN
|
|
|
if [ -z $DN ]
|
if [ -z $DN ]
|
then
|
then
|
# Presume yes here
|
# Presume yes here
|
DN="y"
|
DN="y"
|
fi
|
fi
|
|
|
VAL=$(echo $DN | tr [:upper:] [:lower:])
|
VAL=$(echo $DN | tr [:upper:] [:lower:])
|
else
|
else
|
echo
|
echo
|
#echo "Path does not exist. Please create it and ensure user has correct permissions."
|
#echo "Path does not exist. Please create it and ensure user has correct permissions."
|
echo "Path does not exist. Create $DIR now?"
|
echo "Path does not exist. Create $DIR now?"
|
echo "[y/N]:"
|
echo "[y/N]:"
|
read MKPATH
|
read MKPATH
|
if [ -z $MKPATH ]
|
if [ -z $MKPATH ]
|
then
|
then
|
## $MKPATH was zero, so user probably just pressed enter without entering anything, which we'll interpret as "n" ##
|
## $MKPATH was zero, so user probably just pressed enter without entering anything, which we'll interpret as "n" ##
|
MKPATHYN="n"
|
MKPATHYN="n"
|
else
|
else
|
MKPATHYN=$(echo $MKPATH | tr [:upper:] [:lower:])
|
MKPATHYN=$(echo $MKPATH | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
if [ $MKPATHYN = "y" ]
|
if [ $MKPATHYN = "y" ]
|
then
|
then
|
`mkdir $DIR`
|
`mkdir $DIR`
|
|
|
# Check we made it successfully
|
# Check we made it successfully
|
if [ $? -ne 0 ]
|
if [ $? -ne 0 ]
|
then
|
then
|
DN="n"
|
DN="n"
|
else
|
else
|
DN="x" # Set this so we do go back through and ask the user to verify
|
DN="x" # Set this so we do go back through and ask the user to verify
|
fi
|
fi
|
|
|
else
|
else
|
DN="n"
|
DN="n"
|
fi
|
fi
|
fi
|
fi
|
|
|
if [ $DN = "n" ]
|
if [ $DN = "n" ]
|
then
|
then
|
echo "Enter the path the toolchain should be installed in:"
|
echo "Enter the path the toolchain should be installed in:"
|
read DIR
|
read DIR
|
fi
|
fi
|
|
|
done
|
done
|
cd $DIR
|
cd $DIR
|
# echo "loop done"
|
# echo "loop done"
|
echo "Working in " `pwd`
|
echo "Working in " `pwd`
|
fi
|
fi
|
|
|
BUILD_TOP=$START_DIR/or32-build
|
BUILD_TOP=$START_DIR/or32-build
|
export BUILD_TOP
|
export BUILD_TOP
|
|
|
## Set donload directory to be under the current directory ##
|
## Set donload directory to be under the current directory ##
|
DOWNLOAD_DIR=$START_DIR/or32-download
|
DOWNLOAD_DIR=$START_DIR/or32-download
|
|
|
## Setup the target tool installation directory ##
|
## Setup the target tool installation directory ##
|
INSTALL_DIR=$DIR
|
INSTALL_DIR=$DIR
|
|
|
mkdir $INSTALL_DIR
|
mkdir $INSTALL_DIR
|
|
|
####################################################################################################
|
####################################################################################################
|
## Now check which sources have already been downloaded, if any ##
|
## Now check which sources have already been downloaded, if any ##
|
|
|
## Check if download directory exists, if not create it ##
|
## Check if download directory exists, if not create it ##
|
if [ -d $DOWNLOAD_DIR ]
|
if [ -d $DOWNLOAD_DIR ]
|
then
|
then
|
cd $DOWNLOAD_DIR
|
cd $DOWNLOAD_DIR
|
else
|
else
|
mkdir $DOWNLOAD_DIR
|
mkdir $DOWNLOAD_DIR
|
cd $DOWNLOAD_DIR
|
cd $DOWNLOAD_DIR
|
fi
|
fi
|
|
|
## We'll need the md5sum file ##
|
## We'll need the md5sum file ##
|
## This is a file stored on the ORSoC FTP server, containing checksums of all the files we need ##
|
## This is a file stored on the ORSoC FTP server, containing checksums of all the files we need ##
|
rm -f $MD5SUM_FILE
|
rm -f $MD5SUM_FILE
|
wget ftp://$ORSOC_FTP_USER:$ORSOC_FTP_PASSWD@$ORSOC_FTP_HOST/$ORSOC_FTP_DIR/$MD5SUM_FILE
|
wget ftp://$ORSOC_FTP_USER:$ORSOC_FTP_PASSWD@$ORSOC_FTP_HOST/$ORSOC_FTP_DIR/$MD5SUM_FILE
|
## Make sure we got that OK ##
|
## Make sure we got that OK ##
|
check_exit_code
|
check_exit_code
|
|
|
## We have lists of what to get from each FTP let's create a loop for each ##
|
## We have lists of what to get from each FTP let's create a loop for each ##
|
|
|
## ORSoC FTP server downloads ##
|
## ORSoC FTP server downloads ##
|
for CURRENT_FILE in $ORSOC_FTP_FILE_LIST
|
for CURRENT_FILE in $ORSOC_FTP_FILE_LIST
|
do
|
do
|
# Check if we've already got the file
|
# Check if we've already got the file
|
if [ -e $CURRENT_FILE ]
|
if [ -e $CURRENT_FILE ]
|
then
|
then
|
echo "File $CURRENT_FILE exists locally."
|
echo "File $CURRENT_FILE exists locally."
|
echo "Verifying MD5 checksum:"
|
echo "Verifying MD5 checksum:"
|
## Verify it's right by checking the MD5 checksum ##
|
## Verify it's right by checking the MD5 checksum ##
|
## First we get the line for $CURRENT_FILE out of the $MD5SUM_FILE, then feed it to "md5sum -c"
|
## First we get the line for $CURRENT_FILE out of the $MD5SUM_FILE, then feed it to "md5sum -c"
|
## which checks it and sets the return code, $? to 0 if OK, 1 if problem ##
|
## which checks it and sets the return code, $? to 0 if OK, 1 if problem ##
|
cat $MD5SUM_FILE | grep $CURRENT_FILE | md5sum -c
|
cat $MD5SUM_FILE | grep $CURRENT_FILE | md5sum -c
|
if [ $? -ne 0 ]
|
if [ $? -ne 0 ]
|
then
|
then
|
#MD5sum of $CURRENT_FILE differs from expected value - we'll download it again
|
#MD5sum of $CURRENT_FILE differs from expected value - we'll download it again
|
echo "MD5 checksum of $CURRENT_FILE differs from expected value. Re-downloading."
|
echo "MD5 checksum of $CURRENT_FILE differs from expected value. Re-downloading."
|
rm -f $CURRENT_FILE
|
rm -f $CURRENT_FILE
|
wget ftp://$ORSOC_FTP_USER:$ORSOC_FTP_PASSWD@$ORSOC_FTP_HOST/$ORSOC_FTP_DIR/$CURRENT_FILE
|
wget ftp://$ORSOC_FTP_USER:$ORSOC_FTP_PASSWD@$ORSOC_FTP_HOST/$ORSOC_FTP_DIR/$CURRENT_FILE
|
check_exit_code
|
check_exit_code
|
fi
|
fi
|
else
|
else
|
# File doesn't exist locally - we'll download it
|
# File doesn't exist locally - we'll download it
|
echo "Downloading $CURRENT_FILE"
|
echo "Downloading $CURRENT_FILE"
|
wget ftp://$ORSOC_FTP_USER:$ORSOC_FTP_PASSWD@$ORSOC_FTP_HOST/$ORSOC_FTP_DIR/$CURRENT_FILE
|
wget ftp://$ORSOC_FTP_USER:$ORSOC_FTP_PASSWD@$ORSOC_FTP_HOST/$ORSOC_FTP_DIR/$CURRENT_FILE
|
check_exit_code
|
check_exit_code
|
fi
|
fi
|
echo
|
echo
|
done
|
done
|
|
|
## GNU FTP server downloads ##
|
## GNU FTP server downloads ##
|
for CURRENT_FILE in $GNU_FTP_FILE_LIST
|
for CURRENT_FILE in $GNU_FTP_FILE_LIST
|
do
|
do
|
## Check if we've already got the file ##
|
## Check if we've already got the file ##
|
if [ -e $CURRENT_FILE ]
|
if [ -e $CURRENT_FILE ]
|
then
|
then
|
echo "File $CURRENT_FILE exists locally."
|
echo "File $CURRENT_FILE exists locally."
|
echo "Verifying MD5 checksum:"
|
echo "Verifying MD5 checksum:"
|
## Verify it's right by checking the MD5 checksum ##
|
## Verify it's right by checking the MD5 checksum ##
|
## First we get the line for $CURRENT_FILE out of the $MD5SUM_FILE, then feed it to "md5sum -c"
|
## First we get the line for $CURRENT_FILE out of the $MD5SUM_FILE, then feed it to "md5sum -c"
|
## which checks it and sets the return code, $? to 0 if OK, 1 if problem ##
|
## which checks it and sets the return code, $? to 0 if OK, 1 if problem ##
|
cat $MD5SUM_FILE | grep $CURRENT_FILE | md5sum -c
|
cat $MD5SUM_FILE | grep $CURRENT_FILE | md5sum -c
|
if [ $? -ne 0 ]
|
if [ $? -ne 0 ]
|
then
|
then
|
## MD5sum of present one is incorrect - we'll download it again ##
|
## MD5sum of present one is incorrect - we'll download it again ##
|
echo "MD5 checksum of $CURRENT_FILE differs from expected value. Re-downloading."
|
echo "MD5 checksum of $CURRENT_FILE differs from expected value. Re-downloading."
|
rm -f $CURRENT_FILE
|
rm -f $CURRENT_FILE
|
## Depending on the file, we need a specific path ##
|
## Depending on the file, we need a specific path ##
|
## gcc's path on ftp ##
|
## gcc's path on ftp ##
|
if [ $CURRENT_FILE = $ZBALL2 ]; then
|
if [ $CURRENT_FILE = $ZBALL2 ]; then
|
GNU_FTP_DIR=$GNU_FTP_GCC_DIR
|
GNU_FTP_DIR=$GNU_FTP_GCC_DIR
|
fi
|
fi
|
## gdb's path on ftp ##
|
## gdb's path on ftp ##
|
if [ $CURRENT_FILE = $ZBALL8 ]; then
|
if [ $CURRENT_FILE = $ZBALL8 ]; then
|
GNU_FTP_DIR=$GNU_FTP_GDB_DIR
|
GNU_FTP_DIR=$GNU_FTP_GDB_DIR
|
fi
|
fi
|
wget ftp://$GNU_FTP_USER:$GNU_FTP_USER@$GNU_FTP_HOST/$GNU_FTP_DIR/$CURRENT_FILE
|
wget ftp://$GNU_FTP_USER:$GNU_FTP_USER@$GNU_FTP_HOST/$GNU_FTP_DIR/$CURRENT_FILE
|
check_exit_code
|
check_exit_code
|
fi
|
fi
|
else
|
else
|
# File doesn't exist - we'll download it
|
# File doesn't exist - we'll download it
|
echo "Downloading $CURRENT_FILE"
|
echo "Downloading $CURRENT_FILE"
|
## Depending on the file, we need a specific path ##
|
## Depending on the file, we need a specific path ##
|
## gcc's path on ftp ##
|
## gcc's path on ftp ##
|
if [ $CURRENT_FILE = $ZBALL2 ]; then
|
if [ $CURRENT_FILE = $ZBALL2 ]; then
|
GNU_FTP_DIR=$GNU_FTP_GCC_DIR
|
GNU_FTP_DIR=$GNU_FTP_GCC_DIR
|
fi
|
fi
|
## gdb's path on ftp ##
|
## gdb's path on ftp ##
|
if [ $CURRENT_FILE = $ZBALL8 ]; then
|
if [ $CURRENT_FILE = $ZBALL8 ]; then
|
GNU_FTP_DIR=$GNU_FTP_GDB_DIR
|
GNU_FTP_DIR=$GNU_FTP_GDB_DIR
|
fi
|
fi
|
wget ftp://$GNU_FTP_USER:$GNU_FTP_USER@$GNU_FTP_HOST/$GNU_FTP_DIR/$CURRENT_FILE
|
wget ftp://$GNU_FTP_USER:$GNU_FTP_USER@$GNU_FTP_HOST/$GNU_FTP_DIR/$CURRENT_FILE
|
check_exit_code
|
check_exit_code
|
fi
|
fi
|
echo
|
echo
|
done
|
done
|
|
|
## Kernel.org FTP server downloads ##
|
## Kernel.org FTP server downloads ##
|
CURRENT_FILE=$KERNEL_FTP_FILE_LIST
|
CURRENT_FILE=$KERNEL_FTP_FILE_LIST
|
## Usually just a single file from the kernel.org ftp site ##
|
## Usually just a single file from the kernel.org ftp site ##
|
if [ -e $CURRENT_FILE ]
|
if [ -e $CURRENT_FILE ]
|
then
|
then
|
echo "File $CURRENT_FILE exists locally."
|
echo "File $CURRENT_FILE exists locally."
|
echo "Verifying MD5 checksum:"
|
echo "Verifying MD5 checksum:"
|
## Verify it's right by checking the MD5 checksum ##
|
## Verify it's right by checking the MD5 checksum ##
|
## First we get the line for $CURRENT_FILE out of the $MD5SUM_FILE, then feed it to "md5sum -c"
|
## First we get the line for $CURRENT_FILE out of the $MD5SUM_FILE, then feed it to "md5sum -c"
|
## which checks it and sets the return code, $? to 0 if OK, 1 if problem ##
|
## which checks it and sets the return code, $? to 0 if OK, 1 if problem ##
|
cat $MD5SUM_FILE | grep $CURRENT_FILE | md5sum -c
|
cat $MD5SUM_FILE | grep $CURRENT_FILE | md5sum -c
|
if [ $? -ne 0 ]
|
if [ $? -ne 0 ]
|
then
|
then
|
#MD5sum of present one is incorrect - we'll download it again
|
#MD5sum of present one is incorrect - we'll download it again
|
echo "MD5 checksum of $CURRENT_FILE differs from expected value. Re-downloading."
|
echo "MD5 checksum of $CURRENT_FILE differs from expected value. Re-downloading."
|
rm -f $CURRENT_FILE
|
rm -f $CURRENT_FILE
|
wget ftp://$KERNEL_FTP_USER:$KERNEL_FTP_USER@$KERNEL_FTP_HOST/$KERNEL_FTP_DIR/$CURRENT_FILE
|
wget ftp://$KERNEL_FTP_USER:$KERNEL_FTP_USER@$KERNEL_FTP_HOST/$KERNEL_FTP_DIR/$CURRENT_FILE
|
check_exit_code
|
check_exit_code
|
fi
|
fi
|
else
|
else
|
## Download it ##
|
## Download it ##
|
echo "Downloading $CURRENT_FILE"
|
echo "Downloading $CURRENT_FILE"
|
wget ftp://$KERNEL_FTP_USER:$KERNEL_FTP_PASSWD@$KERNEL_FTP_HOST/$KERNEL_FTP_DIR/$CURRENT_FILE
|
wget ftp://$KERNEL_FTP_USER:$KERNEL_FTP_PASSWD@$KERNEL_FTP_HOST/$KERNEL_FTP_DIR/$CURRENT_FILE
|
check_exit_code
|
check_exit_code
|
fi
|
fi
|
echo
|
echo
|
|
|
####################################################################################################
|
####################################################################################################
|
|
|
cd $START_DIR
|
cd $START_DIR
|
|
|
#if [ 0 eq 1 ] ## DEBUG skipping thing ##
|
#if [ 0 eq 1 ] ## DEBUG skipping thing ##
|
#then
|
#then
|
##Stuff you want to skip in here
|
##Stuff you want to skip in here
|
#else ## DEBUG else
|
#else ## DEBUG else
|
#cd $BUILD_TOP
|
#cd $BUILD_TOP
|
#export PATH=$BUILD_TOP/tools/or32-uclinux/bin:$PATH
|
#export PATH=$BUILD_TOP/tools/or32-uclinux/bin:$PATH
|
#fi ## DEBUG skipping end
|
#fi ## DEBUG skipping end
|
|
|
## A couple of command line options to help if this thing breaks ##
|
## A couple of command line options to help if this thing breaks ##
|
## We won't clear away all the directories if run with the -d or -D options ##
|
## We won't clear away all the directories if run with the -d or -D options ##
|
DBG_BUILD=0
|
DBG_BUILD=0
|
while getopts d OPT; do
|
while getopts d OPT; do
|
case "$OPT" in
|
case "$OPT" in
|
d)
|
d)
|
DBG_BUILD=1
|
DBG_BUILD=1
|
;;
|
;;
|
esac
|
esac
|
done
|
done
|
|
|
## if not debug building, let's remove all the old stuff ##
|
## if not debug building, let's remove all the old stuff ##
|
|
|
if [ $DBG_BUILD -eq 0 ]
|
if [ $DBG_BUILD -eq 0 ]
|
then
|
then
|
## Always start with a clean build dir ##
|
## Always start with a clean build dir ##
|
rm -fr $BUILD_TOP
|
rm -fr $BUILD_TOP
|
mkdir $BUILD_TOP
|
mkdir $BUILD_TOP
|
chmod 777 $BUILD_TOP
|
chmod 777 $BUILD_TOP
|
|
|
mkdir $BUILD_TOP/b-gcc
|
mkdir $BUILD_TOP/b-gcc
|
mkdir $BUILD_TOP/b-b
|
mkdir $BUILD_TOP/b-b
|
fi
|
fi
|
|
|
## default build option is yes ##
|
## default build option is yes ##
|
BUILD_THIS="y"
|
BUILD_THIS="y"
|
|
|
if [ $DBG_BUILD -eq 1 ]
|
if [ $DBG_BUILD -eq 1 ]
|
then
|
then
|
## Ask if we should build binutils ##
|
## Ask if we should build binutils ##
|
echo "Re-build $BINUTILS_VER ?"
|
echo "Re-build $BINUTILS_VER ?"
|
echo "[y/N]:"
|
echo "[y/N]:"
|
read YN
|
read YN
|
## $YN will be zero length string if user just pressed enter ##
|
## $YN will be zero length string if user just pressed enter ##
|
if [ -z $YN ]
|
if [ -z $YN ]
|
then
|
then
|
BUILD_THIS="n"
|
BUILD_THIS="n"
|
else
|
else
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
## Delete and recreate the binutils directory ##
|
## Delete and recreate the binutils directory ##
|
rm -rf $BUILD_TOP/b-b
|
rm -rf $BUILD_TOP/b-b
|
rm -rf $BUILD_TOP/$BINUTILS_VER
|
rm -rf $BUILD_TOP/$BINUTILS_VER
|
mkdir $BUILD_TOP/b-b
|
mkdir $BUILD_TOP/b-b
|
|
|
fi
|
fi
|
fi
|
fi
|
|
|
##########################Building Binutils#######################
|
##########################Building Binutils#######################
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
|
|
echo "############################## Building binutils ###############################"
|
echo "############################## Building binutils ###############################"
|
echo
|
echo
|
echo "Decompressing source"
|
echo "Decompressing source"
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
## Extract sources ##
|
## Extract sources ##
|
tar xjf $DOWNLOAD_DIR/$ZBALL1
|
tar xjf $DOWNLOAD_DIR/$ZBALL1
|
|
|
echo
|
echo
|
echo "Patching binutils with $BINUTILS_PATCH"
|
echo "Patching binutils with $BINUTILS_PATCH"
|
|
|
cd $BINUTILS_VER
|
cd $BINUTILS_VER
|
|
|
bzip2 -dc $DOWNLOAD_DIR/$BINUTILS_PATCH | patch -p1 > $BINUTILS_VER-patch.log 2>&1
|
bzip2 -dc $DOWNLOAD_DIR/$BINUTILS_PATCH | patch -p1 > $BINUTILS_VER-patch.log 2>&1
|
|
|
## Make sure that patched ok ##
|
## Make sure that patched ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cd ..
|
cd ..
|
cd $BUILD_TOP/b-b
|
cd $BUILD_TOP/b-b
|
|
|
echo
|
echo
|
echo "Configuring $BINUTILS_VER: --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --disable-checking"
|
echo "Configuring $BINUTILS_VER: --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --disable-checking"
|
echo "Logging output to $BINUTILS_VER-configure.log"
|
echo "Logging output to $BINUTILS_VER-configure.log"
|
$BUILD_TOP/$BINUTILS_VER/configure --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --disable-checking > $BINUTILS_VER-configure.log 2>&1
|
$BUILD_TOP/$BINUTILS_VER/configure --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --disable-checking > $BINUTILS_VER-configure.log 2>&1
|
|
|
echo
|
echo
|
echo "Making and installing $BINUTILS_VER"
|
echo "Making and installing $BINUTILS_VER"
|
echo "Logging output to $BINUTILS_VER-make.log "
|
echo "Logging output to $BINUTILS_VER-make.log "
|
make all install > $BINUTILS_VER-make.log 2>&1
|
make all install > $BINUTILS_VER-make.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
fi
|
fi
|
#######################Finish Building Binutils#####################
|
#######################Finish Building Binutils#####################
|
|
|
## Export the path to the new or32 binaries directory, used by the rest of this script ##
|
## Export the path to the new or32 binaries directory, used by the rest of this script ##
|
echo
|
echo
|
echo "Adding $INSTALL_DIR/$TARGET/bin to the PATH variable"
|
echo "Adding $INSTALL_DIR/$TARGET/bin to the PATH variable"
|
export PATH=$INSTALL_DIR/$TARGET/bin:$PATH
|
export PATH=$INSTALL_DIR/$TARGET/bin:$PATH
|
|
|
## default build option is yes ##
|
## default build option is yes ##
|
BUILD_THIS="y"
|
BUILD_THIS="y"
|
|
|
if [ $DBG_BUILD -eq 1 ]
|
if [ $DBG_BUILD -eq 1 ]
|
then
|
then
|
## Ask if we should do the initial builds of GCC and Linux ##
|
## Ask if we should do the initial builds of GCC and Linux ##
|
echo "Re-do initial $GCC_VER and $LINUX_VER builds (note if you choose to do this then it's EXTREMELY likely that you will have to do the rest of the script, particularly the re-build of gcc that occurs later)?"
|
echo "Re-do initial $GCC_VER and $LINUX_VER builds (note if you choose to do this then it's EXTREMELY likely that you will have to do the rest of the script, particularly the re-build of gcc that occurs later)?"
|
echo "[y/N]:"
|
echo "[y/N]:"
|
read YN
|
read YN
|
## $YN will be zero length string if user just pressed enter ##
|
## $YN will be zero length string if user just pressed enter ##
|
if [ -z $YN ]
|
if [ -z $YN ]
|
then
|
then
|
BUILD_THIS="n" # default is no
|
BUILD_THIS="n" # default is no
|
else
|
else
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
## Delete and recreate the gcc directory ##
|
## Delete and recreate the gcc directory ##
|
rm -rf $BUILD_TOP/b-gcc
|
rm -rf $BUILD_TOP/b-gcc
|
rm -rf $BUILD_TOP/$GCC_VER
|
rm -rf $BUILD_TOP/$GCC_VER
|
rm -rf $BUILD_TOP/$LINUX_VER
|
rm -rf $BUILD_TOP/$LINUX_VER
|
|
|
mkdir $BUILD_TOP/b-gcc
|
mkdir $BUILD_TOP/b-gcc
|
|
|
## Undo everything done in the next part
|
## Undo everything done in the next part
|
rm -rf $INSTALL_DIR/$TARGET/include
|
rm -rf $INSTALL_DIR/$TARGET/include
|
unlink $INSTALL_DIR/$TARGET/sys-include
|
unlink $INSTALL_DIR/$TARGET/sys-include
|
|
|
fi
|
fi
|
fi
|
fi
|
|
|
##########################Building GCC and Linux############################
|
##########################Building GCC and Linux############################
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
|
|
echo
|
echo
|
echo "####################### Building or32 gcc and Linux ############################"
|
echo "####################### Building or32 gcc and Linux ############################"
|
echo
|
echo
|
echo "Decompressing source"
|
echo "Decompressing source"
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
## Extract sources ##
|
## Extract sources ##
|
tar xjf $DOWNLOAD_DIR/$ZBALL2 ## gcc sources ##
|
tar xjf $DOWNLOAD_DIR/$ZBALL2 ## gcc sources ##
|
|
|
tar xjf $DOWNLOAD_DIR/$ZBALL4 ## Linux kernel sources ##
|
tar xjf $DOWNLOAD_DIR/$ZBALL4 ## Linux kernel sources ##
|
|
|
echo
|
echo
|
echo "Patching $LINUX_VER with patch file $LINUX_PATCH"
|
echo "Patching $LINUX_VER with patch file $LINUX_PATCH"
|
|
|
cd $LINUX_VER
|
cd $LINUX_VER
|
|
|
## Apply patch to linux kernel sources ##
|
## Apply patch to linux kernel sources ##
|
bzip2 -dc $DOWNLOAD_DIR/$LINUX_PATCH | patch -p1 > $LINUX_VER-patch.log 2>&1
|
bzip2 -dc $DOWNLOAD_DIR/$LINUX_PATCH | patch -p1 > $LINUX_VER-patch.log 2>&1
|
|
|
## Make sure that patched ok ##
|
## Make sure that patched ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cp rgd_dot_config .config
|
cp rgd_dot_config .config
|
|
|
echo
|
echo
|
echo "Making Linux oldconfig"
|
echo "Making Linux oldconfig"
|
|
|
make oldconfig > $LINUX_VER-make-oldconfig.log 2>&1
|
make oldconfig > $LINUX_VER-make-oldconfig.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
mkdir $INSTALL_DIR/$TARGET/include
|
mkdir $INSTALL_DIR/$TARGET/include
|
mkdir $INSTALL_DIR/$TARGET/include/asm
|
mkdir $INSTALL_DIR/$TARGET/include/asm
|
mkdir $INSTALL_DIR/$TARGET/include/linux
|
mkdir $INSTALL_DIR/$TARGET/include/linux
|
|
|
cp -f -dR $LINUX_VER/include/linux/* $INSTALL_DIR/$TARGET/include/linux
|
cp -f -dR $LINUX_VER/include/linux/* $INSTALL_DIR/$TARGET/include/linux
|
cp -f -dR $LINUX_VER/include/asm-or32/* $INSTALL_DIR/$TARGET/include/asm
|
cp -f -dR $LINUX_VER/include/asm-or32/* $INSTALL_DIR/$TARGET/include/asm
|
|
|
cd $INSTALL_DIR/$TARGET
|
cd $INSTALL_DIR/$TARGET
|
ln -s include sys-include
|
ln -s include sys-include
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
cd $GCC_VER
|
cd $GCC_VER
|
|
|
## Patch gcc ##
|
## Patch gcc ##
|
echo
|
echo
|
echo "Patching $GCC_VER with $GCC_PATCH"
|
echo "Patching $GCC_VER with $GCC_PATCH"
|
|
|
bzip2 -dc $DOWNLOAD_DIR/$GCC_PATCH | patch -p1 > $GCC_VER-patch.log 2>&1
|
bzip2 -dc $DOWNLOAD_DIR/$GCC_PATCH | patch -p1 > $GCC_VER-patch.log 2>&1
|
|
|
## Make sure that patched ok ##
|
## Make sure that patched ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
cd b-gcc
|
cd b-gcc
|
|
|
# configure GCC
|
# configure GCC
|
echo
|
echo
|
echo "Configuring $GCC_VER: --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --with-local-prefix=$INSTALL_DIR/$TARGET/or32-uclinux --with-gnu-as --with-gnu-ld --disable-libssp --enable-languages=c"
|
echo "Configuring $GCC_VER: --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --with-local-prefix=$INSTALL_DIR/$TARGET/or32-uclinux --with-gnu-as --with-gnu-ld --disable-libssp --enable-languages=c"
|
echo "Logging output to $GCC_VER-configure.log"
|
echo "Logging output to $GCC_VER-configure.log"
|
$BUILD_TOP/$GCC_VER/configure --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --with-local-prefix=$INSTALL_DIR/$TARGET/or32-uclinux --with-gnu-as --with-gnu-ld --disable-libssp --enable-languages=c > $GCC_VER-configure.log 2>&1
|
$BUILD_TOP/$GCC_VER/configure --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --with-local-prefix=$INSTALL_DIR/$TARGET/or32-uclinux --with-gnu-as --with-gnu-ld --disable-libssp --enable-languages=c > $GCC_VER-configure.log 2>&1
|
|
|
echo
|
echo
|
echo "Making and installing $GCC_VER"
|
echo "Making and installing $GCC_VER"
|
echo "Logging output to $GCC_VER-make.log"
|
echo "Logging output to $GCC_VER-make.log"
|
make all install > $GCC_VER-make.log 2>&1
|
make all install > $GCC_VER-make.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
echo
|
echo
|
echo "Making vmlinux image"
|
echo "Making vmlinux image"
|
echo "Logging output to vmlinux-make.log"
|
echo "Logging output to vmlinux-make.log"
|
|
|
cd $LINUX_VER
|
cd $LINUX_VER
|
make vmlinux ARCH=or32 CROSS_COMPILE=$INSTALL_DIR/$TARGET/bin/$TARGET- > vmlinux-make.log 2>&1
|
make vmlinux ARCH=or32 CROSS_COMPILE=$INSTALL_DIR/$TARGET/bin/$TARGET- > vmlinux-make.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
fi
|
fi
|
##########################Finish Building GCC and Linux############################
|
##########################Finish Building GCC and Linux############################
|
|
|
|
|
## default build option is yes ##
|
## default build option is yes ##
|
BUILD_THIS="y"
|
BUILD_THIS="y"
|
|
|
if [ $DBG_BUILD -eq 1 ]
|
if [ $DBG_BUILD -eq 1 ]
|
then
|
then
|
## Ask if we should rebuild uClibc ##
|
## Ask if we should rebuild uClibc ##
|
echo "Re-build $UCLIB_VER ?"
|
echo "Re-build $UCLIB_VER ?"
|
echo "[y/N]:"
|
echo "[y/N]:"
|
read YN
|
read YN
|
## $YN will be zero length string if user just pressed enter ##
|
## $YN will be zero length string if user just pressed enter ##
|
if [ -z $YN ]
|
if [ -z $YN ]
|
then
|
then
|
BUILD_THIS="n" # default is no
|
BUILD_THIS="n" # default is no
|
else
|
else
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
## Delete the uClibc directory ##
|
## Delete the uClibc directory ##
|
rm -rf $BUILD_TOP/$UCLIB_VER
|
rm -rf $BUILD_TOP/$UCLIB_VER
|
fi
|
fi
|
fi
|
fi
|
|
|
##########################Building uClibc#########################
|
##########################Building uClibc#########################
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
|
|
echo
|
echo
|
echo "############################## Building uClibc #################################"
|
echo "############################## Building uClibc #################################"
|
echo
|
echo
|
echo "Decompressing source"
|
echo "Decompressing source"
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
tar xjf $DOWNLOAD_DIR/$ZBALL3 ## uClibc sources ##
|
tar xjf $DOWNLOAD_DIR/$ZBALL3 ## uClibc sources ##
|
|
|
echo
|
echo
|
echo "Patching $UCLIB_VER with $UCLIBC_PATCH"
|
echo "Patching $UCLIB_VER with $UCLIBC_PATCH"
|
|
|
cd $UCLIB_VER
|
cd $UCLIB_VER
|
|
|
## Patch uClibc sources ##
|
## Patch uClibc sources ##
|
bzip2 -dc $DOWNLOAD_DIR/$UCLIBC_PATCH | patch -p1 > $UCLIB_VER-patch.log 2>&1
|
bzip2 -dc $DOWNLOAD_DIR/$UCLIBC_PATCH | patch -p1 > $UCLIB_VER-patch.log 2>&1
|
|
|
## Make sure that patched ok ##
|
## Make sure that patched ok ##
|
check_exit_code
|
check_exit_code
|
|
|
export CC=$TARGET-gcc
|
export CC=$TARGET-gcc
|
export BUILD_TOP
|
export BUILD_TOP
|
#cp $DOWNLOAD_DIR/$CONFIG1 $BUILD_TOP/$UCLIB_VER/.config
|
#cp $DOWNLOAD_DIR/$CONFIG1 $BUILD_TOP/$UCLIB_VER/.config
|
#cp $DOWNLOAD_DIR/$CONFIG1 $BUILD_TOP/$UCLIB_VER/.config.old
|
#cp $DOWNLOAD_DIR/$CONFIG1 $BUILD_TOP/$UCLIB_VER/.config.old
|
|
|
## $TARGET name implementation into config script ##
|
## $TARGET name implementation into config script ##
|
## First get the second part of the target name, after the "-", the "elf" in "or32-elf", for example ##
|
## First get the second part of the target name, after the "-", the "elf" in "or32-elf", for example ##
|
TARGET_SECOND_PART=`echo $TARGET | cut -f 2 -d "-"`
|
TARGET_SECOND_PART=`echo $TARGET | cut -f 2 -d "-"`
|
## First change any references to the uclinux target ##
|
## First change any references to the uclinux target ##
|
## And delete the line saying DEVEL_PREFIX so we can put our $INSTALL_DIR path in ##
|
## And delete the line saying DEVEL_PREFIX so we can put our $INSTALL_DIR path in ##
|
sed "s/or32\-uclinux/\or32\-$TARGET_SECOND_PART/" $DOWNLOAD_DIR/$CONFIG1 | sed "/DEVEL\_PREFIX\=/d" > $BUILD_TOP/$UCLIB_VER/.config ## Output to the .config ##
|
sed "s/or32\-uclinux/\or32\-$TARGET_SECOND_PART/" $DOWNLOAD_DIR/$CONFIG1 | sed "/DEVEL\_PREFIX\=/d" > $BUILD_TOP/$UCLIB_VER/.config ## Output to the .config ##
|
## Now output the new DEVEL_PATH= value ##
|
## Now output the new DEVEL_PATH= value ##
|
echo "DEVEL_PREFIX=\"$INSTALL_DIR/$TARGET\"" >> $BUILD_TOP/$UCLIB_VER/.config
|
echo "DEVEL_PREFIX=\"$INSTALL_DIR/$TARGET\"" >> $BUILD_TOP/$UCLIB_VER/.config
|
## copy it to .config.old ##
|
## copy it to .config.old ##
|
cp $BUILD_TOP/$UCLIB_VER/.config $BUILD_TOP/$UCLIB_VER/.config.old
|
cp $BUILD_TOP/$UCLIB_VER/.config $BUILD_TOP/$UCLIB_VER/.config.old
|
## Do the configuration ##
|
## Do the configuration ##
|
|
|
## Change the cross compiler name in the Config.or32 file
|
## Change the cross compiler name in the Config.or32 file
|
## First get the second part of the target name, after the "-" ##
|
## First get the second part of the target name, after the "-" ##
|
TARGET_SECOND_PART=`echo $TARGET | cut -f 2 -d "-"`
|
TARGET_SECOND_PART=`echo $TARGET | cut -f 2 -d "-"`
|
## Removes the uclinux line and changes to whatever our current target is ##
|
## Removes the uclinux line and changes to whatever our current target is ##
|
sed "s/or32\-uclinux/\or32\-$TARGET_SECOND_PART/" $BUILD_TOP/$UCLIB_VER/extra/Configs/Config.or32 > $BUILD_TOP/$UCLIB_VER/extra/Configs/Config.or32.newtarget
|
sed "s/or32\-uclinux/\or32\-$TARGET_SECOND_PART/" $BUILD_TOP/$UCLIB_VER/extra/Configs/Config.or32 > $BUILD_TOP/$UCLIB_VER/extra/Configs/Config.or32.newtarget
|
mv $BUILD_TOP/$UCLIB_VER/extra/Configs/Config.or32.newtarget $BUILD_TOP/$UCLIB_VER/extra/Configs/Config.or32
|
mv $BUILD_TOP/$UCLIB_VER/extra/Configs/Config.or32.newtarget $BUILD_TOP/$UCLIB_VER/extra/Configs/Config.or32
|
|
|
echo
|
echo
|
echo "Making uClibc oldconfig"
|
echo "Making uClibc oldconfig"
|
make oldconfig > $UCLIB_VER-make-oldconfig.log 2>&1
|
make oldconfig > $UCLIB_VER-make-oldconfig.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
ln -s extra/Configs/Config.or32 Config
|
ln -s extra/Configs/Config.or32 Config
|
|
|
echo
|
echo
|
echo "Making and install $UCLIB_VER"
|
echo "Making and install $UCLIB_VER"
|
echo "Logging output to $UCLIB_VER-make.log"
|
echo "Logging output to $UCLIB_VER-make.log"
|
make all install > $UCLIB_VER-make.log 2>&1
|
make all install > $UCLIB_VER-make.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
unset CC
|
unset CC
|
fi
|
fi
|
##########################Finish Building uClibc#########################
|
##########################Finish Building uClibc#########################
|
|
|
|
|
## default build option is yes ##
|
## default build option is yes ##
|
BUILD_THIS="y"
|
BUILD_THIS="y"
|
|
|
if [ $DBG_BUILD -eq 1 ]
|
if [ $DBG_BUILD -eq 1 ]
|
then
|
then
|
## Ask if we should rebuild gcc ##
|
## Ask if we should rebuild gcc ##
|
echo "Perform $GCC_VER re-build? - YES (y) if you rebuilt GCC and Linux previously, otherwise definitely NO (n)."
|
echo "Perform $GCC_VER re-build? - YES (y) if you rebuilt GCC and Linux previously, otherwise definitely NO (n)."
|
echo "[y/N]:"
|
echo "[y/N]:"
|
read YN
|
read YN
|
## $YN will be zero length string if user just pressed enter ##
|
## $YN will be zero length string if user just pressed enter ##
|
if [ -z $YN ]
|
if [ -z $YN ]
|
then
|
then
|
BUILD_THIS="n" # default is no
|
BUILD_THIS="n" # default is no
|
else
|
else
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
## Undo some things we did before after doing this compile ##
|
## Undo some things we did before after doing this compile ##
|
unlink $INSTALL_DIR/$TARGET/$TARGET/sys-include
|
unlink $INSTALL_DIR/$TARGET/$TARGET/sys-include
|
rm -rf $INSTALL_DIR/$TARGET/$TARGET/lib/*
|
rm -rf $INSTALL_DIR/$TARGET/$TARGET/lib/*
|
fi
|
fi
|
fi
|
fi
|
|
|
|
|
##########################re-Building GCC########################
|
##########################re-Building GCC########################
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
|
|
echo
|
echo
|
echo "############################## Re-building or-32 gcc ###########################"
|
echo "############################## Re-building or-32 gcc ###########################"
|
echo
|
echo
|
echo "Re-building $GCC_VER"
|
echo "Re-building $GCC_VER"
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
cd b-gcc
|
cd b-gcc
|
|
|
echo
|
echo
|
echo "Re-configuring $GCC_VER: --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --with-local-prefix=$INSTALL_DIR/$TARGET/$TARGET --with-gnu-as --with-gnu-ld --disable-libssp --enable-languages=c"
|
echo "Re-configuring $GCC_VER: --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --with-local-prefix=$INSTALL_DIR/$TARGET/$TARGET --with-gnu-as --with-gnu-ld --disable-libssp --enable-languages=c"
|
echo "Logging output to $GCC_VER-rebuild-configure.log"
|
echo "Logging output to $GCC_VER-rebuild-configure.log"
|
|
|
$BUILD_TOP/$GCC_VER/configure --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --with-local-prefix=$INSTALL_DIR/$TARGET/$TARGET --with-gnu-as --with-gnu-ld --disable-libssp --enable-languages=c > $GCC_VER-rebuild-configure.log 2>&1
|
$BUILD_TOP/$GCC_VER/configure --target=$TARGET --prefix=$INSTALL_DIR/$TARGET --with-local-prefix=$INSTALL_DIR/$TARGET/$TARGET --with-gnu-as --with-gnu-ld --disable-libssp --enable-languages=c > $GCC_VER-rebuild-configure.log 2>&1
|
|
|
|
|
|
|
echo
|
echo
|
echo "Re-building and re-installing $GCC_VER"
|
echo "Re-building and re-installing $GCC_VER"
|
echo "Logging output to $GCC_VER-rebuild-make.log"
|
echo "Logging output to $GCC_VER-rebuild-make.log"
|
make all install > $GCC_VER-rebuild-make.log 2>&1
|
make all install > $GCC_VER-rebuild-make.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cd $INSTALL_DIR/$TARGET/$TARGET
|
cd $INSTALL_DIR/$TARGET/$TARGET
|
ln -s ../include sys-include
|
ln -s ../include sys-include
|
cd lib
|
cd lib
|
cp -f -dR ../../lib/* .
|
cp -f -dR ../../lib/* .
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
fi
|
fi
|
|
|
##########################finish re-Building GCC########################
|
##########################finish re-Building GCC########################
|
|
|
|
|
## default build option is yes ##
|
## default build option is yes ##
|
BUILD_THIS="y"
|
BUILD_THIS="y"
|
|
|
if [ $DBG_BUILD -eq 1 ]
|
if [ $DBG_BUILD -eq 1 ]
|
then
|
then
|
## Ask if we should rebuild gdb ##
|
## Ask if we should rebuild gdb ##
|
echo "Rebuild $GDB_VER?"
|
echo "Rebuild $GDB_VER?"
|
echo "[y/N]:"
|
echo "[y/N]:"
|
read YN
|
read YN
|
## $YN will be zero length string if user just pressed enter ##
|
## $YN will be zero length string if user just pressed enter ##
|
if [ -z $YN ]
|
if [ -z $YN ]
|
then
|
then
|
BUILD_THIS="n" # default is no
|
BUILD_THIS="n" # default is no
|
else
|
else
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
## Delete existing gdb dir ##
|
## Delete existing gdb dir ##
|
rm -rf $BUILD_TOP/$GDB_VER
|
rm -rf $BUILD_TOP/$GDB_VER
|
fi
|
fi
|
fi
|
fi
|
|
|
|
|
########################## GDB build ################
|
########################## GDB build ################
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
|
|
echo
|
echo
|
echo "############################## Building GDB ####################################"
|
echo "############################## Building GDB ####################################"
|
echo
|
echo
|
echo "Decompressing source"
|
echo "Decompressing source"
|
|
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
tar xjf $DOWNLOAD_DIR/$ZBALL8
|
tar xjf $DOWNLOAD_DIR/$ZBALL8
|
|
|
echo
|
echo
|
echo "Patching $GDB_VER with $GDB_PATCH"
|
echo "Patching $GDB_VER with $GDB_PATCH"
|
|
|
cd $GDB_VER
|
cd $GDB_VER
|
|
|
bzcat -dc $DOWNLOAD_DIR/$GDB_PATCH | patch -p1 > $GDB_VER-patch.log 2>&1
|
bzcat -dc $DOWNLOAD_DIR/$GDB_PATCH | patch -p1 > $GDB_VER-patch.log 2>&1
|
|
|
## Make sure that patched ok ##
|
## Make sure that patched ok ##
|
check_exit_code
|
check_exit_code
|
|
|
echo
|
echo
|
echo "Configuring $GDB_VER: --target=$TARGET --prefix=$INSTALL_DIR/$TARGET"
|
echo "Configuring $GDB_VER: --target=$TARGET --prefix=$INSTALL_DIR/$TARGET"
|
|
|
./configure --target=$TARGET --prefix=$INSTALL_DIR/$TARGET > $GDB_VER-configure.log 2>&1
|
./configure --target=$TARGET --prefix=$INSTALL_DIR/$TARGET > $GDB_VER-configure.log 2>&1
|
|
|
echo
|
echo
|
echo "Making and installing $GDB_VER"
|
echo "Making and installing $GDB_VER"
|
|
|
make all install > $GDB_VER-make.log 2>&1
|
make all install > $GDB_VER-make.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
fi
|
fi
|
########################## finish GDB build ################
|
########################## finish GDB build ################
|
|
|
## default build option is yes ##
|
## default build option is yes ##
|
BUILD_THIS="y"
|
BUILD_THIS="y"
|
|
|
if [ $DBG_BUILD -eq 1 ]
|
if [ $DBG_BUILD -eq 1 ]
|
then
|
then
|
## Ask if we should rebuild busybox ##
|
## Ask if we should rebuild busybox ##
|
echo "Rebuild $BUSY_VER?"
|
echo "Rebuild $BUSY_VER?"
|
echo "[y/N]:"
|
echo "[y/N]:"
|
read YN
|
read YN
|
## $YN will be zero length string if user just pressed enter ##
|
## $YN will be zero length string if user just pressed enter ##
|
if [ -z $YN ]
|
if [ -z $YN ]
|
then
|
then
|
BUILD_THIS="n" # default is no
|
BUILD_THIS="n" # default is no
|
else
|
else
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
## Delete existing busybox stuff ##
|
## Delete existing busybox stuff ##
|
rm -rf $BUILD_TOP/$BUSY_VER
|
rm -rf $BUILD_TOP/$BUSY_VER
|
fi
|
fi
|
fi
|
fi
|
|
|
##########################Building Busybox########################
|
##########################Building Busybox########################
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
|
|
echo
|
echo
|
echo "############################## Building BusyBox ################################"
|
echo "############################## Building BusyBox ################################"
|
echo
|
echo
|
echo "Decompressing source"
|
echo "Decompressing source"
|
|
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
tar xjf $DOWNLOAD_DIR/$ZBALL5
|
tar xjf $DOWNLOAD_DIR/$ZBALL5
|
|
|
|
|
cd $BUSY_VER
|
cd $BUSY_VER
|
cp $DOWNLOAD_DIR/$CONFIG2 $BUILD_TOP/$BUSY_VER/.config
|
cp $DOWNLOAD_DIR/$CONFIG2 $BUILD_TOP/$BUSY_VER/.config
|
cp $DOWNLOAD_DIR/$CONFIG2 $BUILD_TOP/$BUSY_VER/.config.old
|
cp $DOWNLOAD_DIR/$CONFIG2 $BUILD_TOP/$BUSY_VER/.config.old
|
|
|
echo
|
echo
|
echo "Making $BUSY_VER oldconfig"
|
echo "Making $BUSY_VER oldconfig"
|
make oldconfig > $BUSY_VER-make-oldconfig.log 2>&1
|
make oldconfig > $BUSY_VER-make-oldconfig.log 2>&1
|
|
|
## Make Sure that built ok ##
|
## Make Sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
## Put the Linux headers in BusyBox's include dir ##
|
## Put the Linux headers in BusyBox's include dir ##
|
|
|
ln -s $BUILD_TOP/$LINUX_VER/include/linux $BUILD_TOP/$BUSY_VER/include/.
|
ln -s $BUILD_TOP/$LINUX_VER/include/linux $BUILD_TOP/$BUSY_VER/include/.
|
ln -s $BUILD_TOP/$LINUX_VER/include/asm $BUILD_TOP/$BUSY_VER/include/.
|
ln -s $BUILD_TOP/$LINUX_VER/include/asm $BUILD_TOP/$BUSY_VER/include/.
|
|
|
echo
|
echo
|
echo "Making $BUSY_VER"
|
echo "Making $BUSY_VER"
|
echo "Logging output to $BUSY_VER-make.log"
|
echo "Logging output to $BUSY_VER-make.log"
|
make ARCH=or32 CROSS_COMPILE=$INSTALL_DIR/$TARGET/bin/$TARGET- > $BUSY_VER-make.log 2>&1
|
make ARCH=or32 CROSS_COMPILE=$INSTALL_DIR/$TARGET/bin/$TARGET- > $BUSY_VER-make.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
echo
|
echo
|
echo "Installing $BUSY_VER"
|
echo "Installing $BUSY_VER"
|
echo "Logging output to $BUSY_VER-install.log"
|
echo "Logging output to $BUSY_VER-install.log"
|
make install ARCH=or32 CROSS_COMPILE=$INSTALL_DIR/$TARGET/bin/$TARGET- > $BUSY_VER-install.log 2>&1
|
make install ARCH=or32 CROSS_COMPILE=$INSTALL_DIR/$TARGET/bin/$TARGET- > $BUSY_VER-install.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
## Copy and extract the ramdisk image file
|
## Copy and extract the ramdisk image file
|
|
|
cp $DOWNLOAD_DIR/$ZBALL7 . ## Ramdisk file ##
|
cp $DOWNLOAD_DIR/$ZBALL7 . ## Ramdisk file ##
|
|
|
bunzip2 $RAMDISK_FILE.bz2
|
bunzip2 $RAMDISK_FILE.bz2
|
|
|
RT=`whoami`
|
RT=`whoami`
|
if [ $RT = "root" ];then
|
if [ $RT = "root" ];then
|
mkdir rd_mount
|
mkdir rd_mount
|
chmod 777 rd_mount
|
chmod 777 rd_mount
|
mount -t ext2 -o loop $RAMDISK_FILE rd_mount
|
mount -t ext2 -o loop $RAMDISK_FILE rd_mount
|
cp -f -dR $BUILD_TOP/busy_out.1.7.5/* $BUILD_TOP/rd_mount
|
cp -f -dR $BUILD_TOP/busy_out.1.7.5/* $BUILD_TOP/rd_mount
|
umount rd_mount
|
umount rd_mount
|
cp -f $RAMDISK_FILE $LINUX_VER/$LINUX_RAMDISK_FILE
|
cp -f $RAMDISK_FILE $LINUX_VER/$LINUX_RAMDISK_FILE
|
else
|
else
|
echo
|
echo
|
echo "User is not root. Unable to mount Linux ramdisk."
|
echo "User is not root. Unable to mount Linux ramdisk."
|
echo "Note that this program built BusyBox but did not"
|
echo "Note that this program built BusyBox but did not"
|
echo "install it on the ramdisk. Defaults are used."
|
echo "install it on the ramdisk. Defaults are used."
|
cp -f $RAMDISK_FILE $LINUX_VER/$LINUX_RAMDISK_FILE
|
cp -f $RAMDISK_FILE $LINUX_VER/$LINUX_RAMDISK_FILE
|
fi
|
fi
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
fi
|
fi
|
##########################finish Building Busybox########################
|
##########################finish Building Busybox########################
|
|
|
########################## Finish BusyBox build ################
|
########################## Finish BusyBox build ################
|
|
|
## default build option is yes ##
|
## default build option is yes ##
|
BUILD_THIS="y"
|
BUILD_THIS="y"
|
|
|
if [ $DBG_BUILD -eq 1 ]
|
if [ $DBG_BUILD -eq 1 ]
|
then
|
then
|
## Ask if we should rebuild linux again##
|
## Ask if we should rebuild linux again##
|
echo "Rebuild the $LINUX_VER rebuild (only ever yes (y) if performed previous linux rebuild)?"
|
echo "Rebuild the $LINUX_VER rebuild (only ever yes (y) if performed previous linux rebuild)?"
|
echo "[y/N]:"
|
echo "[y/N]:"
|
read YN
|
read YN
|
## $YN will be zero length string if user just pressed enter ##
|
## $YN will be zero length string if user just pressed enter ##
|
if [ -z $YN ]
|
if [ -z $YN ]
|
then
|
then
|
BUILD_THIS="n" # default is no
|
BUILD_THIS="n" # default is no
|
else
|
else
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
fi
|
fi
|
|
|
#echo "Start Building Linux kernel?"
|
#echo "Start Building Linux kernel?"
|
#read Q
|
#read Q
|
##########################Final Linux kernel build################
|
##########################Final Linux kernel build################
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
|
|
echo
|
echo
|
echo "########################### Linux image generation #############################"
|
echo "########################### Linux image generation #############################"
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
cd $LINUX_VER
|
cd $LINUX_VER
|
|
|
echo
|
echo
|
echo "Making vmlinux"
|
echo "Making vmlinux"
|
echo "Logging output to vmlinux-remake.log"
|
echo "Logging output to vmlinux-remake.log"
|
make vmlinux ARCH=or32 CROSS_COMPILE=$INSTALL_DIR/$TARGET/bin/$TARGET- > vmlinux-remake.log 2>&1
|
make vmlinux ARCH=or32 CROSS_COMPILE=$INSTALL_DIR/$TARGET/bin/$TARGET- > vmlinux-remake.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
fi
|
fi
|
##########################Finished Final Linux kernel build################
|
##########################Finished Final Linux kernel build################
|
|
|
## default build option is yes ##
|
## default build option is yes ##
|
BUILD_THIS="y"
|
BUILD_THIS="y"
|
|
|
if [ $DBG_BUILD -eq 1 ]
|
if [ $DBG_BUILD -eq 1 ]
|
then
|
then
|
## Ask if we should rebuild or1ksim##
|
## Ask if we should rebuild or1ksim##
|
echo "Rebuild $SIM_VER ?"
|
echo "Rebuild $SIM_VER ?"
|
echo "[y/N]:"
|
echo "[y/N]:"
|
read YN
|
read YN
|
## $YN will be zero length string if user just pressed enter ##
|
## $YN will be zero length string if user just pressed enter ##
|
if [ -z $YN ]
|
if [ -z $YN ]
|
then
|
then
|
BUILD_THIS="n" # default is no
|
BUILD_THIS="n" # default is no
|
else
|
else
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
BUILD_THIS=$(echo $YN | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
## Clean previous or1ksim directories ##
|
## Clean previous or1ksim directories ##
|
rm -rf $BUILD_TOP/$SIM_VER
|
rm -rf $BUILD_TOP/$SIM_VER
|
fi
|
fi
|
fi
|
fi
|
|
|
|
|
#echo "Start Building Simulator?"
|
#echo "Start Building Simulator?"
|
#read Q
|
#read Q
|
##########################Simulator build#########################
|
##########################Simulator build#########################
|
if [ $BUILD_THIS = "y" ]
|
if [ $BUILD_THIS = "y" ]
|
then
|
then
|
|
|
echo
|
echo
|
echo "############################## Building or1ksim ################################"
|
echo "############################## Building or1ksim ################################"
|
echo
|
echo
|
echo "Decompressing source"
|
echo "Decompressing source"
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
|
|
tar xjf $DOWNLOAD_DIR/$ZBALL6
|
tar xjf $DOWNLOAD_DIR/$ZBALL6
|
|
|
cd $SIM_VER
|
cd $SIM_VER
|
|
|
echo
|
echo
|
echo "Configuring $SIM_VER: --target=$TARGET --prefix=$INSTALL_DIR/$TARGET"
|
echo "Configuring $SIM_VER: --target=$TARGET --prefix=$INSTALL_DIR/$TARGET"
|
|
|
./configure --target=$TARGET --prefix=$INSTALL_DIR/$TARGET > $SIM_VER-configure.log 2>&1
|
./configure --target=$TARGET --prefix=$INSTALL_DIR/$TARGET > $SIM_VER-configure.log 2>&1
|
|
|
echo
|
echo
|
echo "Making and installing $SIM_VER"
|
echo "Making and installing $SIM_VER"
|
echo "Logging output to $SIM_VER-make.log"
|
echo "Logging output to $SIM_VER-make.log"
|
make all install > $SIM_VER-make.log 2>&1
|
make all install > $SIM_VER-make.log 2>&1
|
|
|
## Make sure that built ok ##
|
## Make sure that built ok ##
|
check_exit_code
|
check_exit_code
|
|
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
fi
|
fi
|
##########################Finish Simulator build#########################
|
##########################Finish Simulator build#########################
|
|
|
|
|
##########################Code Test###############################
|
##########################Code Test###############################
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
echo "Launch the simulator with the newly compiled Linux image and BusyBox apps?"
|
echo "Launch the simulator with the newly compiled Linux image and BusyBox apps?"
|
echo "[y/N]:"
|
echo "[y/N]:"
|
read SI
|
read SI
|
|
|
if [ -z $SI ]
|
if [ -z $SI ]
|
then
|
then
|
SVAL="n" ## Default is no ##
|
SVAL="n" ## Default is no ##
|
else
|
else
|
SVAL=$(echo $SI | tr [:upper:] [:lower:])
|
SVAL=$(echo $SI | tr [:upper:] [:lower:])
|
fi
|
fi
|
|
|
if [ $SVAL = "y" ];then
|
if [ $SVAL = "y" ];then
|
|
|
## Check for X's xterm, if we find it, and a valid $DISPLAY variable, we'll open the simulator with an xterm tty ##
|
## Check for X's xterm, if we find it, and a valid $DISPLAY variable, we'll open the simulator with an xterm tty ##
|
which xterm
|
which xterm
|
|
|
|
|
if [ $? -eq 0 ]
|
if [ $? -eq 0 ]
|
then
|
then
|
# Xterm exists, check if the $DISPLAY variable is set
|
# Xterm exists, check if the $DISPLAY variable is set
|
# Get the display variable
|
# Get the display variable
|
DISPLAY=`printenv DISPLAY`
|
DISPLAY=`printenv DISPLAY`
|
echo "DISPLAY variable is set to $DISPLAY"
|
echo "DISPLAY variable is set to $DISPLAY"
|
if [ -n $DISPLAY ]
|
if [ -n $DISPLAY ]
|
then
|
then
|
## It appears display is set, let's set the or1ksim_linux.cfg file to use an xterm instead of telnet ##
|
## It appears display is set, let's set the or1ksim_linux.cfg file to use an xterm instead of telnet ##
|
cd $LINUX_VER
|
cd $LINUX_VER
|
## Rename the original script, adding .orig to the end ##
|
## Rename the original script, adding .orig to the end ##
|
mv or1ksim_linux.cfg or1ksim_linux.cfg.orig
|
mv or1ksim_linux.cfg or1ksim_linux.cfg.orig
|
## Now use sed to comment the line specifiying a telnet tty and uncomment the xterm line, restoring the original script ##
|
## Now use sed to comment the line specifiying a telnet tty and uncomment the xterm line, restoring the original script ##
|
sed 's/channel\ \=\ \"tcp\:10084\"/\/\*\ channel\ \=\ \"tcp\:10084\"\ \*\//' or1ksim_linux.cfg.orig | sed 's/\/\*\ channel\ \=\ \"xterm\:\"\ \*\//\ channel\ \=\ \"xterm\:\"\ /' > or1ksim_linux.cfg
|
sed 's/channel\ \=\ \"tcp\:10084\"/\/\*\ channel\ \=\ \"tcp\:10084\"\ \*\//' or1ksim_linux.cfg.orig | sed 's/\/\*\ channel\ \=\ \"xterm\:\"\ \*\//\ channel\ \=\ \"xterm\:\"\ /' > or1ksim_linux.cfg
|
echo "########################## or1ksim ###############################"
|
echo "########################## or1ksim ###############################"
|
echo
|
echo
|
echo "or1ksim will open an xterm for console output as Linux is booting."
|
echo "or1ksim will open an xterm for console output as Linux is booting."
|
echo
|
echo
|
echo "########################## or1ksim ###############################"
|
echo "########################## or1ksim ###############################"
|
cd $BUILD_TOP
|
cd $BUILD_TOP
|
fi
|
fi
|
|
|
else
|
else
|
echo "########################## or1ksim ###############################"
|
echo "########################## or1ksim ###############################"
|
echo
|
echo
|
echo " To connect to the simulator run: telnet 127.0.0.1 10084"
|
echo " To connect to the simulator run: telnet 127.0.0.1 10084"
|
echo
|
echo
|
echo "########################## or1ksim ###############################"
|
echo "########################## or1ksim ###############################"
|
|
|
fi
|
fi
|
|
|
|
|
cd $BUILD_TOP/$LINUX_VER
|
cd $BUILD_TOP/$LINUX_VER
|
$INSTALL_DIR/$TARGET/bin/$TARGET-sim -f or1ksim_linux.cfg vmlinux
|
$INSTALL_DIR/$TARGET/bin/$TARGET-sim -f or1ksim_linux.cfg vmlinux
|
|
|
else
|
else
|
## User didn't run the sim, but tell them how to anyway ##
|
## User didn't run the sim, but tell them how to anyway ##
|
echo "The compiled linux image is found in $BUILD_TOP/$LINUX_VER/vmlinux"
|
echo "The compiled linux image is found in $BUILD_TOP/$LINUX_VER/vmlinux"
|
echo "To run it in the simulator, cd to $BUILD_TOP/$LINUX_VER"
|
echo "To run it in the simulator, cd to $BUILD_TOP/$LINUX_VER"
|
echo "and run:"
|
echo "and run:"
|
echo "$TARGET-sim -f or1ksim_linux.cfg vmlinux"
|
echo "$TARGET-sim -f or1ksim_linux.cfg vmlinux"
|
echo
|
echo
|
|
|
fi
|
fi
|
|
|
echo
|
echo
|
echo "OpenRISC toolchain and architectural simulator build is complete!"
|
echo "OpenRISC toolchain and architectural simulator build is complete!"
|
echo
|
echo
|
echo "Your tools are installed in: $INSTALL_DIR/$TARGET"
|
echo "Your tools are installed in: $INSTALL_DIR/$TARGET"
|
echo
|
echo
|
echo "Please add $INSTALL_DIR/$TARGET/bin to your PATH variable"
|
echo "Please add $INSTALL_DIR/$TARGET/bin to your PATH variable"
|
echo
|
echo
|
exit 0
|
exit 0
|
|
|
##########################End Script##############################
|
##########################End Script##############################
|
|
|
