///////////////////////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////////////////////
|
//
|
//
|
// Filename: llqspi.v
|
// Filename: lleqspi.v
|
//
|
//
|
// Project: Wishbone Controlled Quad SPI Flash Controller
|
// Project: Wishbone Controlled Quad SPI Flash Controller
|
//
|
//
|
// Purpose: Reads/writes a word (user selectable number of bytes) of data
|
// Purpose: Reads/writes a word (user selectable number of bytes) of data
|
// to/from a Quad SPI port. The port is understood to be
|
// to/from a Quad SPI port. The port is understood to be
|
// a normal SPI port unless the driver requests four bit mode.
|
// a normal SPI port unless the driver requests four bit mode.
|
// When not in use, unlike our previous SPI work, no bits will
|
// When not in use, unlike our previous SPI work, no bits will
|
// toggle.
|
// toggle.
|
//
|
//
|
// Creator: Dan Gisselquist
|
// Creator: Dan Gisselquist
|
// Gisselquist Technology, LLC
|
// Gisselquist Technology, LLC
|
//
|
//
|
///////////////////////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////////////////////
|
//
|
//
|
// Copyright (C) 2015-2016, Gisselquist Technology, LLC
|
// Copyright (C) 2015-2016, Gisselquist Technology, LLC
|
//
|
//
|
// This program is free software (firmware): you can redistribute it and/or
|
// This program is free software (firmware): you can redistribute it and/or
|
// modify it under the terms of the GNU General Public License as published
|
// modify it under the terms of the GNU General Public License as published
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// by the Free Software Foundation, either version 3 of the License, or (at
|
// your option) any later version.
|
// your option) any later version.
|
//
|
//
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
// for more details.
|
// for more details.
|
//
|
//
|
// You should have received a copy of the GNU General Public License along
|
// You should have received a copy of the GNU General Public License along
|
// with this program. (It's in the $(ROOT)/doc directory, run make with no
|
// with this program. (It's in the $(ROOT)/doc directory, run make with no
|
// target there if the PDF file isn't present.) If not, see
|
// target there if the PDF file isn't present.) If not, see
|
// <http://www.gnu.org/licenses/> for a copy.
|
// <http://www.gnu.org/licenses/> for a copy.
|
//
|
//
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
// License: GPL, v3, as defined and found on www.gnu.org,
|
// http://www.gnu.org/licenses/gpl.html
|
// http://www.gnu.org/licenses/gpl.html
|
//
|
//
|
//
|
//
|
///////////////////////////////////////////////////////////////////////////
|
///////////////////////////////////////////////////////////////////////////
|
`define EQSPI_IDLE 3'h0
|
`define EQSPI_IDLE 3'h0
|
`define EQSPI_START 3'h1
|
`define EQSPI_START 3'h1
|
`define EQSPI_BITS 3'h2
|
`define EQSPI_BITS 3'h2
|
`define EQSPI_READY 3'h3
|
`define EQSPI_READY 3'h3
|
`define EQSPI_HOLDING 3'h4
|
`define EQSPI_HOLDING 3'h4
|
`define EQSPI_STOP 3'h5
|
`define EQSPI_STOP 3'h5
|
`define EQSPI_STOP_B 3'h6
|
`define EQSPI_STOP_B 3'h6
|
`define EQSPI_RECYCLE 3'h7
|
`define EQSPI_RECYCLE 3'h7
|
|
|
// Modes
|
// Modes
|
`define EQSPI_MOD_SPI 2'b00
|
`define EQSPI_MOD_SPI 2'b00
|
`define EQSPI_MOD_QOUT 2'b10 // Write
|
`define EQSPI_MOD_QOUT 2'b10 // Write
|
`define EQSPI_MOD_QIN 2'b11 // Read
|
`define EQSPI_MOD_QIN 2'b11 // Read
|
|
|
module lleqspi(i_clk,
|
module lleqspi(i_clk,
|
// Module interface
|
// Module interface
|
i_wr, i_hold, i_word, i_len, i_spd, i_dir, i_recycle,
|
i_wr, i_hold, i_word, i_len, i_spd, i_dir, i_recycle,
|
o_word, o_valid, o_busy,
|
o_word, o_valid, o_busy,
|
// QSPI interface
|
// QSPI interface
|
o_sck, o_cs_n, o_mod, o_dat, i_dat);
|
o_sck, o_cs_n, o_mod, o_dat, i_dat);
|
input i_clk;
|
input i_clk;
|
// Chip interface
|
// Chip interface
|
// Can send info
|
// Can send info
|
// i_dir = 1, i_spd = 0, i_hold = 0, i_wr = 1,
|
// i_dir = 1, i_spd = 0, i_hold = 0, i_wr = 1,
|
// i_word = { 1'b0, 32'info to send },
|
// i_word = { 1'b0, 32'info to send },
|
// i_len = # of bytes in word-1
|
// i_len = # of bytes in word-1
|
input i_wr, i_hold;
|
input i_wr, i_hold;
|
input [31:0] i_word;
|
input [31:0] i_word;
|
input [1:0] i_len; // 0=>8bits, 1=>16 bits, 2=>24 bits, 3=>32 bits
|
input [1:0] i_len; // 0=>8bits, 1=>16 bits, 2=>24 bits, 3=>32 bits
|
input i_spd; // 0 -> normal QPI, 1 -> QSPI
|
input i_spd; // 0 -> normal QPI, 1 -> QSPI
|
input i_dir; // 0 -> read, 1 -> write to SPI
|
input i_dir; // 0 -> read, 1 -> write to SPI
|
input i_recycle; // 0 = 20ns, 1 = 50ns
|
input i_recycle; // 0 = 20ns, 1 = 50ns
|
output reg [31:0] o_word;
|
output reg [31:0] o_word;
|
output wire o_valid;
|
output reg o_valid;
|
output reg o_busy;
|
output reg o_busy;
|
// Interface with the QSPI lines
|
// Interface with the QSPI lines
|
output reg o_sck;
|
output reg o_sck;
|
output reg o_cs_n;
|
output reg o_cs_n;
|
output reg [1:0] o_mod;
|
output reg [1:0] o_mod;
|
output reg [3:0] o_dat;
|
output reg [3:0] o_dat;
|
input [3:0] i_dat;
|
input [3:0] i_dat;
|
|
|
// output wire [22:0] o_dbg;
|
// output wire [22:0] o_dbg;
|
// assign o_dbg = { state, spi_len,
|
// assign o_dbg = { state, spi_len,
|
// o_busy, o_valid, o_cs_n, o_sck, o_mod, o_dat, i_dat };
|
// o_busy, o_valid, o_cs_n, o_sck, o_mod, o_dat, i_dat };
|
|
|
// Timing:
|
|
//
|
|
// Tick Clk BSY/WR CS_n BIT/MO STATE
|
|
// 0 1 0/0 1 -
|
|
// 1 1 0/1 1 -
|
|
// 2 1 1/0 0 - QSPI_START
|
|
// 3 0 1/0 0 - QSPI_START
|
|
// 4 0 1/0 0 0 QSPI_BITS
|
|
// 5 1 1/0 0 0 QSPI_BITS
|
|
// 6 0 1/0 0 1 QSPI_BITS
|
|
// 7 1 1/0 0 1 QSPI_BITS
|
|
// 8 0 1/0 0 2 QSPI_BITS
|
|
// 9 1 1/0 0 2 QSPI_BITS
|
|
// 10 0 1/0 0 3 QSPI_BITS
|
|
// 11 1 1/0 0 3 QSPI_BITS
|
|
// 12 0 1/0 0 4 QSPI_BITS
|
|
// 13 1 1/0 0 4 QSPI_BITS
|
|
// 14 0 1/0 0 5 QSPI_BITS
|
|
// 15 1 1/0 0 5 QSPI_BITS
|
|
// 16 0 1/0 0 6 QSPI_BITS
|
|
// 17 1 1/1 0 6 QSPI_BITS
|
|
// 18 0 1/1 0 7 QSPI_READY
|
|
// 19 1 0/1 0 7 QSPI_READY
|
|
// 20 0 1/0/V 0 8 QSPI_BITS
|
|
// 21 1 1/0 0 8 QSPI_BITS
|
|
// 22 0 1/0 0 9 QSPI_BITS
|
|
// 23 1 1/0 0 9 QSPI_BITS
|
|
// 24 0 1/0 0 10 QSPI_BITS
|
|
// 25 1 1/0 0 10 QSPI_BITS
|
|
// 26 0 1/0 0 11 QSPI_BITS
|
|
// 27 1 1/0 0 11 QSPI_BITS
|
|
// 28 0 1/0 0 12 QSPI_BITS
|
|
// 29 1 1/0 0 12 QSPI_BITS
|
|
// 30 0 1/0 0 13 QSPI_BITS
|
|
// 31 1 1/0 0 13 QSPI_BITS
|
|
// 32 0 1/0 0 14 QSPI_BITS
|
|
// 33 1 1/0 0 14 QSPI_BITS
|
|
// 34 0 1/0 0 15 QSPI_READY
|
|
// 35 1 1/0 0 15 QSPI_READY
|
|
// 36 1 1/0/V 0 - QSPI_STOP
|
|
// 37 1 1/0 0 - QSPI_STOPB
|
|
// 38 1 1/0 1 - QSPI_IDLE
|
|
// 39 1 0/0 1 -
|
|
// Now, let's switch from single bit to quad mode
|
|
// 40 1 0/0 1 - QSPI_IDLE
|
|
// 41 1 0/1 1 - QSPI_IDLE
|
|
// 42 1 1/0 0 - QSPI_START
|
|
// 43 0 1/0 0 - QSPI_START
|
|
// 44 0 1/0 0 0 QSPI_BITS
|
|
// 45 1 1/0 0 0 QSPI_BITS
|
|
// 46 0 1/0 0 1 QSPI_BITS
|
|
// 47 1 1/0 0 1 QSPI_BITS
|
|
// 48 0 1/0 0 2 QSPI_BITS
|
|
// 49 1 1/0 0 2 QSPI_BITS
|
|
// 50 0 1/0 0 3 QSPI_BITS
|
|
// 51 1 1/0 0 3 QSPI_BITS
|
|
// 52 0 1/0 0 4 QSPI_BITS
|
|
// 53 1 1/0 0 4 QSPI_BITS
|
|
// 54 0 1/0 0 5 QSPI_BITS
|
|
// 55 1 1/0 0 5 QSPI_BITS
|
|
// 56 0 1/0 0 6 QSPI_BITS
|
|
// 57 1 1/1/QR 0 6 QSPI_BITS
|
|
// 58 0 1/1/QR 0 7 QSPI_READY
|
|
// 59 1 0/1/QR 0 7 QSPI_READY
|
|
// 60 0 1/0/?/V 0 8-11 QSPI_BITS
|
|
// 61 1 1/0/? 0 8-11 QSPI_BITS
|
|
// 62 0 1/0/? 0 12-15 QSPI_BITS
|
|
// 63 1 1/0/? 0 12-15 QSPI_BITS
|
|
// 64 1 1/0/?/V 0 - QSPI_STOP
|
|
// 65 1 1/0/? 0 - QSPI_STOPB
|
|
// 66 1 1/0/? 1 - QSPI_IDLE
|
|
// 67 1 0/0 1 - QSPI_IDLE
|
|
// Now let's try something entirely in Quad read mode, from the
|
|
// beginning
|
|
// 68 1 0/1/QR 1 - QSPI_IDLE
|
|
// 69 1 1/0 0 - QSPI_START
|
|
// 70 0 1/0 0 - QSPI_START
|
|
// 71 0 1/0 0 0-3 QSPI_BITS
|
|
// 72 1 1/0 0 0-3 QSPI_BITS
|
|
// 73 0 1/1/QR 0 4-7 QSPI_BITS
|
|
// 74 1 0/1/QR 0 4-7 QSPI_BITS
|
|
// 75 0 1/?/?/V 0 8-11 QSPI_BITS
|
|
// 76 1 1/?/? 0 8-11 QSPI_BITS
|
|
// 77 0 1/1/QR 0 12-15 QSPI_BITS
|
|
// 78 1 0/1/QR 0 12-15 QSPI_BITS
|
|
// 79 0 1/?/?/V 0 16-19 QSPI_BITS
|
|
// 80 1 1/0 0 16-19 QSPI_BITS
|
|
// 81 0 1/0 0 20-23 QSPI_BITS
|
|
// 82 1 1/0 0 20-23 QSPI_BITS
|
|
// 83 1 1/0/V 0 - QSPI_STOP
|
|
// 84 1 1/0 0 - QSPI_STOPB
|
|
// 85 1 1/0 1 - QSPI_IDLE
|
|
// 86 1 0/0 1 - QSPI_IDLE
|
|
|
|
wire i_miso;
|
wire i_miso;
|
assign i_miso = i_dat[1];
|
assign i_miso = i_dat[1];
|
|
|
// These are used in creating a delayed input.
|
// These are used in creating a delayed input.
|
reg rd_input, rd_spd, rd_valid;
|
reg rd_input, rd_spd, rd_valid;
|
|
|
reg r_spd, r_dir;
|
reg r_spd, r_dir;
|
reg [3:0] r_recycle;
|
reg [3:0] r_recycle;
|
reg [5:0] spi_len;
|
reg [5:0] spi_len;
|
reg [31:0] r_word;
|
reg [31:0] r_word;
|
reg [30:0] r_input;
|
reg [30:0] r_input;
|
reg [2:0] state;
|
reg [2:0] state;
|
initial state = `EQSPI_IDLE;
|
initial state = `EQSPI_IDLE;
|
initial o_sck = 1'b1;
|
initial o_sck = 1'b1;
|
initial o_cs_n = 1'b1;
|
initial o_cs_n = 1'b1;
|
initial o_dat = 4'hd;
|
initial o_dat = 4'hd;
|
initial rd_valid = 1'b0;
|
initial rd_valid = 1'b0;
|
initial o_busy = 1'b0;
|
initial o_busy = 1'b0;
|
initial r_input = 31'h000;
|
initial r_input = 31'h000;
|
initial rd_valid = 1'b0;
|
initial rd_valid = 1'b0;
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
begin
|
begin
|
rd_input <= 1'b0;
|
rd_input <= 1'b0;
|
rd_spd <= r_spd;
|
rd_spd <= r_spd;
|
rd_valid <= 1'b0;
|
rd_valid <= 1'b0;
|
|
|
if ((state == `EQSPI_IDLE)&&(o_sck))
|
if ((state == `EQSPI_IDLE)&&(o_sck))
|
begin
|
begin
|
o_cs_n <= 1'b1;
|
o_cs_n <= 1'b1;
|
o_busy <= 1'b0;
|
o_busy <= 1'b0;
|
o_mod <= `EQSPI_MOD_SPI;
|
o_mod <= `EQSPI_MOD_SPI;
|
r_word <= i_word;
|
r_word <= i_word;
|
r_spd <= i_spd;
|
r_spd <= i_spd;
|
r_dir <= i_dir;
|
r_dir <= i_dir;
|
o_dat <= 4'hc;
|
o_dat <= 4'hc;
|
r_recycle <= (i_recycle)? 4'h8 : 4'h2; // 4'ha : 4'h4
|
r_recycle <= (i_recycle)? 4'h8 : 4'h2; // 4'ha : 4'h4
|
spi_len<= { 1'b0, i_len, 3'b000 } + 6'h8;
|
spi_len<= { 1'b0, i_len, 3'b000 } + 6'h8;
|
o_sck <= 1'b1;
|
o_sck <= 1'b1;
|
if (i_wr)
|
if (i_wr)
|
begin
|
begin
|
state <= `EQSPI_START;
|
state <= `EQSPI_START;
|
o_cs_n <= 1'b0;
|
o_cs_n <= 1'b0;
|
o_busy <= 1'b1;
|
o_busy <= 1'b1;
|
end
|
end
|
end else if (state == `EQSPI_START)
|
end else if (state == `EQSPI_START)
|
begin // We come in here with sck high, stay here 'til sck is low
|
begin // We come in here with sck high, stay here 'til sck is low
|
o_sck <= 1'b0;
|
o_sck <= 1'b0;
|
if (o_sck == 1'b0)
|
if (o_sck == 1'b0)
|
begin
|
begin
|
state <= `EQSPI_BITS;
|
state <= `EQSPI_BITS;
|
spi_len<= spi_len - ( (r_spd)? 6'h4 : 6'h1 );
|
spi_len<= spi_len - ( (r_spd)? 6'h4 : 6'h1 );
|
if (r_spd)
|
if (r_spd)
|
r_word <= { r_word[27:0], 4'h0 };
|
r_word <= { r_word[27:0], 4'h0 };
|
else
|
else
|
r_word <= { r_word[30:0], 1'b0 };
|
r_word <= { r_word[30:0], 1'b0 };
|
end
|
end
|
o_mod <= (r_spd) ? { 1'b1, r_dir } : `EQSPI_MOD_SPI;
|
o_mod <= (r_spd) ? { 1'b1, r_dir } : `EQSPI_MOD_SPI;
|
o_cs_n <= 1'b0;
|
o_cs_n <= 1'b0;
|
o_busy <= 1'b1;
|
o_busy <= 1'b1;
|
if (r_spd)
|
if (r_spd)
|
o_dat <= r_word[31:28];
|
o_dat <= r_word[31:28];
|
else
|
else
|
o_dat <= { 3'b110, r_word[31] };
|
o_dat <= { 3'b110, r_word[31] };
|
end else if (~o_sck)
|
end else if (~o_sck)
|
begin
|
begin
|
o_sck <= 1'b1;
|
o_sck <= 1'b1;
|
o_busy <= ((state != `EQSPI_READY)||(~i_wr));
|
o_busy <= ((state != `EQSPI_READY)||(~i_wr));
|
end else if (state == `EQSPI_BITS)
|
end else if (state == `EQSPI_BITS)
|
begin
|
begin
|
// Should enter into here with at least a spi_len
|
// Should enter into here with at least a spi_len
|
// of one, perhaps more
|
// of one, perhaps more
|
o_sck <= 1'b0;
|
o_sck <= 1'b0;
|
o_busy <= 1'b1;
|
o_busy <= 1'b1;
|
if (r_spd)
|
if (r_spd)
|
begin
|
begin
|
o_dat <= r_word[31:28];
|
o_dat <= r_word[31:28];
|
r_word <= { r_word[27:0], 4'h0 };
|
r_word <= { r_word[27:0], 4'h0 };
|
spi_len <= spi_len - 6'h4;
|
spi_len <= spi_len - 6'h4;
|
if (spi_len == 6'h4)
|
if (spi_len == 6'h4)
|
state <= `EQSPI_READY;
|
state <= `EQSPI_READY;
|
end else begin
|
end else begin
|
o_dat <= { 3'b110, r_word[31] };
|
o_dat <= { 3'b110, r_word[31] };
|
r_word <= { r_word[30:0], 1'b0 };
|
r_word <= { r_word[30:0], 1'b0 };
|
spi_len <= spi_len - 6'h1;
|
spi_len <= spi_len - 6'h1;
|
if (spi_len == 6'h1)
|
if (spi_len == 6'h1)
|
state <= `EQSPI_READY;
|
state <= `EQSPI_READY;
|
end
|
end
|
|
|
rd_input <= 1'b1;
|
rd_input <= 1'b1;
|
end else if (state == `EQSPI_READY)
|
end else if (state == `EQSPI_READY)
|
begin
|
begin
|
o_cs_n <= 1'b0;
|
o_cs_n <= 1'b0;
|
o_busy <= 1'b1;
|
o_busy <= 1'b1;
|
// This is the state on the last clock (both low and
|
// This is the state on the last clock (both low and
|
// high clocks) of the data. Data is valid during
|
// high clocks) of the data. Data is valid during
|
// this state. Here we chose to either STOP or
|
// this state. Here we chose to either STOP or
|
// continue and transmit more.
|
// continue and transmit more.
|
o_sck <= (i_hold); // No clocks while holding
|
o_sck <= (i_hold); // No clocks while holding
|
if((~o_busy)&&(i_wr))// Acknowledge a new request
|
if((~o_busy)&&(i_wr))// Acknowledge a new request
|
begin
|
begin
|
state <= `EQSPI_BITS;
|
state <= `EQSPI_BITS;
|
o_busy <= 1'b1;
|
o_busy <= 1'b1;
|
o_sck <= 1'b0;
|
o_sck <= 1'b0;
|
|
|
// Read the new request off the bus
|
// Read the new request off the bus
|
r_spd <= i_spd;
|
r_spd <= i_spd;
|
r_dir <= i_dir;
|
r_dir <= i_dir;
|
// Set up the first bits on the bus
|
// Set up the first bits on the bus
|
o_mod <= (i_spd) ? { 1'b1, i_dir } : `EQSPI_MOD_SPI;
|
o_mod <= (i_spd) ? { 1'b1, i_dir } : `EQSPI_MOD_SPI;
|
if (i_spd)
|
if (i_spd)
|
begin
|
begin
|
o_dat <= i_word[31:28];
|
o_dat <= i_word[31:28];
|
r_word <= { i_word[27:0], 4'h0 };
|
r_word <= { i_word[27:0], 4'h0 };
|
// spi_len <= spi_len - 4;
|
// spi_len <= spi_len - 4;
|
spi_len<= { 1'b0, i_len, 3'b000 } + 6'h8
|
spi_len<= { 1'b0, i_len, 3'b000 } + 6'h8
|
- 6'h4;
|
- 6'h4;
|
end else begin
|
end else begin
|
o_dat <= { 3'b110, i_word[31] };
|
o_dat <= { 3'b110, i_word[31] };
|
r_word <= { i_word[30:0], 1'b0 };
|
r_word <= { i_word[30:0], 1'b0 };
|
spi_len<= { 1'b0, i_len, 3'b000 } + 6'h8
|
spi_len<= { 1'b0, i_len, 3'b000 } + 6'h8
|
- 6'h1;
|
- 6'h1;
|
end
|
end
|
|
|
// Read a bit upon any transition
|
// Read a bit upon any transition
|
rd_input <= 1'b1;
|
rd_input <= 1'b1;
|
rd_valid <= 1'b1;
|
rd_valid <= 1'b1;
|
end else begin
|
end else begin
|
o_sck <= 1'b1;
|
o_sck <= 1'b1;
|
state <= (i_hold)?`EQSPI_HOLDING : `EQSPI_STOP;
|
state <= (i_hold)?`EQSPI_HOLDING : `EQSPI_STOP;
|
o_busy <= (~i_hold);
|
o_busy <= (~i_hold);
|
|
|
// Read a bit upon any transition
|
// Read a bit upon any transition
|
rd_valid <= 1'b1;
|
rd_valid <= 1'b1;
|
rd_input <= 1'b1;
|
rd_input <= 1'b1;
|
end
|
end
|
end else if (state == `EQSPI_HOLDING)
|
end else if (state == `EQSPI_HOLDING)
|
begin
|
begin
|
// We need this state so that the o_valid signal
|
// We need this state so that the o_valid signal
|
// can get strobed with our last result. Otherwise
|
// can get strobed with our last result. Otherwise
|
// we could just sit in READY waiting for a new command.
|
// we could just sit in READY waiting for a new command.
|
//
|
//
|
// Incidentally, the change producing this state was
|
// Incidentally, the change producing this state was
|
// the result of a nasty race condition. See the
|
// the result of a nasty race condition. See the
|
// commends in wbqspiflash for more details.
|
// commends in wbqspiflash for more details.
|
//
|
//
|
rd_valid <= 1'b0;
|
rd_valid <= 1'b0;
|
o_cs_n <= 1'b0;
|
o_cs_n <= 1'b0;
|
o_busy <= 1'b0;
|
o_busy <= 1'b0;
|
if((~o_busy)&&(i_wr))// Acknowledge a new request
|
if((~o_busy)&&(i_wr))// Acknowledge a new request
|
begin
|
begin
|
state <= `EQSPI_BITS;
|
state <= `EQSPI_BITS;
|
o_busy <= 1'b1;
|
o_busy <= 1'b1;
|
o_sck <= 1'b0;
|
o_sck <= 1'b0;
|
|
|
// Read the new request off the bus
|
// Read the new request off the bus
|
r_spd <= i_spd;
|
r_spd <= i_spd;
|
r_dir <= i_dir;
|
r_dir <= i_dir;
|
// Set up the first bits on the bus
|
// Set up the first bits on the bus
|
o_mod<=(i_spd)?{ 1'b1, i_dir } : `EQSPI_MOD_SPI;
|
o_mod<=(i_spd)?{ 1'b1, i_dir } : `EQSPI_MOD_SPI;
|
if (i_spd)
|
if (i_spd)
|
begin
|
begin
|
o_dat <= i_word[31:28];
|
o_dat <= i_word[31:28];
|
r_word <= { i_word[27:0], 4'h0 };
|
r_word <= { i_word[27:0], 4'h0 };
|
spi_len<= { 1'b0, i_len, 3'b100 };
|
spi_len<= { 1'b0, i_len, 3'b100 };
|
end else begin
|
end else begin
|
o_dat <= { 3'b110, i_word[31] };
|
o_dat <= { 3'b110, i_word[31] };
|
r_word <= { i_word[30:0], 1'b0 };
|
r_word <= { i_word[30:0], 1'b0 };
|
spi_len<= { 1'b0, i_len, 3'b111 };
|
spi_len<= { 1'b0, i_len, 3'b111 };
|
end
|
end
|
end else begin
|
end else begin
|
o_sck <= 1'b1;
|
o_sck <= 1'b1;
|
state <= (i_hold)?`EQSPI_HOLDING : `EQSPI_STOP;
|
state <= (i_hold)?`EQSPI_HOLDING : `EQSPI_STOP;
|
o_busy <= (~i_hold);
|
o_busy <= (~i_hold);
|
end
|
end
|
end else if (state == `EQSPI_STOP)
|
end else if (state == `EQSPI_STOP)
|
begin
|
begin
|
o_sck <= 1'b1; // Stop the clock
|
o_sck <= 1'b1; // Stop the clock
|
rd_valid <= 1'b0; // Output may have just been valid, but no more
|
rd_valid <= 1'b0; // Output may have just been valid, but no more
|
o_busy <= 1'b1; // Still busy till port is clear
|
o_busy <= 1'b1; // Still busy till port is clear
|
state <= `EQSPI_STOP_B;
|
state <= `EQSPI_STOP_B;
|
// Can't change modes for at least one cycle
|
// Can't change modes for at least one cycle
|
// o_mod <= `EQSPI_MOD_SPI;
|
// o_mod <= `EQSPI_MOD_SPI;
|
end else if (state == `EQSPI_STOP_B)
|
end else if (state == `EQSPI_STOP_B)
|
begin
|
begin
|
o_cs_n <= 1'b1;
|
o_cs_n <= 1'b1;
|
o_sck <= 1'b1;
|
o_sck <= 1'b1;
|
// Do I need this????
|
// Do I need this????
|
// spi_len <= 3; // Minimum CS high time before next cmd
|
// spi_len <= 3; // Minimum CS high time before next cmd
|
state <= `EQSPI_RECYCLE;
|
state <= `EQSPI_RECYCLE;
|
o_busy <= 1'b1;
|
o_busy <= 1'b1;
|
o_mod <= `EQSPI_MOD_SPI;
|
o_mod <= `EQSPI_MOD_SPI;
|
end else begin // Recycle state
|
end else begin // Recycle state
|
r_recycle <= r_recycle - 1'b1;
|
r_recycle <= r_recycle - 1'b1;
|
o_cs_n <= 1'b1;
|
o_cs_n <= 1'b1;
|
o_sck <= 1'b1;
|
o_sck <= 1'b1;
|
o_busy <= 1'b1;
|
o_busy <= 1'b1;
|
o_mod <= `EQSPI_MOD_SPI;
|
o_mod <= `EQSPI_MOD_SPI;
|
o_dat <= 4'hc;
|
o_dat <= 4'hc;
|
if (r_recycle[3:1] == 3'h0)
|
if (r_recycle[3:1] == 3'h0)
|
state <= `EQSPI_IDLE;
|
state <= `EQSPI_IDLE;
|
end
|
end
|
/*
|
/*
|
end else begin // Invalid states, should never get here
|
end else begin // Invalid states, should never get here
|
state <= `EQSPI_STOP;
|
state <= `EQSPI_STOP;
|
o_valid <= 1'b0;
|
o_valid <= 1'b0;
|
o_busy <= 1'b1;
|
o_busy <= 1'b1;
|
o_cs_n <= 1'b1;
|
o_cs_n <= 1'b1;
|
o_sck <= 1'b1;
|
o_sck <= 1'b1;
|
o_mod <= `EQSPI_MOD_SPI;
|
o_mod <= `EQSPI_MOD_SPI;
|
o_dat <= 4'hd;
|
o_dat <= 4'hd;
|
end
|
end
|
*/
|
*/
|
end
|
end
|
|
|
|
`define EXTRA_DELAY
|
|
wire rd_input_N, rd_valid_N, r_spd_N;
|
|
`ifdef EXTRA_DELAY
|
|
reg [2:0] rd_input_p, rd_valid_p, r_spd_p;
|
|
always @(posedge i_clk)
|
|
rd_input_p <= { rd_input_p[1:0], rd_input };
|
|
always @(posedge i_clk)
|
|
rd_valid_p <= { rd_valid_p[1:0], rd_valid };
|
|
always @(posedge i_clk)
|
|
r_spd_p <= { r_spd_p[1:0], r_spd };
|
|
|
|
assign rd_input_N = rd_input_p[2];
|
|
assign rd_valid_N = rd_valid_p[2];
|
|
assign r_spd_N = r_spd_p[2];
|
|
`else
|
|
assign rd_input_N = rd_input;
|
|
assign rd_valid_N = rd_valid;
|
|
assign r_spd_N = rd_spd;
|
|
`endif
|
|
|
|
|
always @(posedge i_clk)
|
always @(posedge i_clk)
|
begin
|
begin
|
if ((state == `EQSPI_IDLE)||(rd_valid))
|
// if ((state == `EQSPI_IDLE)||(rd_valid_N))
|
|
if (o_valid)
|
r_input <= 31'h00;
|
r_input <= 31'h00;
|
else if ((rd_input)&&(r_spd))
|
if ((rd_input_N)&&(r_spd_N))
|
r_input <= { r_input[26:0], i_dat };
|
r_input <= { r_input[26:0], i_dat };
|
else if (rd_input)
|
else if (rd_input_N)
|
r_input <= { r_input[29:0], i_miso };
|
r_input <= { r_input[29:0], i_miso };
|
|
|
if ((rd_valid)&&(r_spd))
|
if ((rd_valid_N)&&(r_spd_N))
|
o_word <= { r_input[27:0], i_dat };
|
o_word <= { r_input[27:0], i_dat };
|
else if (rd_valid)
|
else if (rd_valid_N)
|
o_word <= { r_input[30:0], i_miso };
|
o_word <= { r_input[30:0], i_miso };
|
|
o_valid <= rd_valid_N;
|
end
|
end
|
|
|
assign o_valid = rd_valid;
|
|
|
|
endmodule
|
endmodule
|
|
|
|
|