OpenCores
URL https://opencores.org/ocsvn/s6soc/s6soc/trunk

Subversion Repositories s6soc

[/] [s6soc/] [trunk/] [rtl/] [rxuart.v] - Diff between revs 2 and 4

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 2 Rev 4
Line 1... Line 1...
/////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
//
 
//
//
// Filename:    rxuart.v
// Filename:    rxuart.v
//
//
// Project:     FPGA library development (Spartan 3E development board)
// Project:     CMod S6 System on a Chip, ZipCPU demonstration project
//
//
// Purpose:     Receive and decode inputs from a single UART line.
// Purpose:     Receive and decode inputs from a single UART line.
//
//
//
//
//      To interface with this module, connect it to your system clock,
//      To interface with this module, connect it to your system clock,
Line 58... Line 57...
//
//
//
//
// Creator:     Dan Gisselquist, Ph.D.
// Creator:     Dan Gisselquist, Ph.D.
//              Gisselquist Technology, LLC
//              Gisselquist Technology, LLC
//
//
// Copyright:   2015
////////////////////////////////////////////////////////////////////////////////
 
//
 
// Copyright (C) 2015-2016, Gisselquist Technology, LLC
 
//
 
// This program is free software (firmware): you can redistribute it and/or
 
// modify it under the terms of  the GNU General Public License as published
 
// by the Free Software Foundation, either version 3 of the License, or (at
 
// your option) any later version.
 
//
 
// This program is distributed in the hope that it will be useful, but WITHOUT
 
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
 
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 
// for more details.
 
//
 
// You should have received a copy of the GNU General Public License along
 
// with this program.  (It's in the $(ROOT)/doc directory, run make with no
 
// target there if the PDF file isn't present.)  If not, see
 
// <http://www.gnu.org/licenses/> for a copy.
//
//
 
// License:     GPL, v3, as defined and found on www.gnu.org,
 
//              http://www.gnu.org/licenses/gpl.html
//
//
/////////////////////////////////////////////////////////////////////////
 
//
//
// This software is the ownership of Gisselquist Technology, LLC, and as
////////////////////////////////////////////////////////////////////////////////
// such it is proprietary.  It is provided without any warrantees, either
 
// express or implied, so that it may be tested.  Upon completion, I ask
 
// that working code be returned and not further distributed beyond those
 
// that it is originally offered to.
 
//
//
// Thank you.
 
//
//
 
 
// States: (@ baud counter == 0)
// States: (@ baud counter == 0)
//      0        First bit arrives
//      0        First bit arrives
//      ..7     Bits arrive
//      ..7     Bits arrive
//      8       Stop bit (x1)
//      8       Stop bit (x1)
//      9       Stop bit (x2)
//      9       Stop bit (x2)

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.