/*********************************************************************
|
/*********************************************************************
|
|
|
SDRAM Controller Core File
|
SDRAM Controller Core File
|
|
|
This file is part of the sdram controller project
|
This file is part of the sdram controller project
|
http://www.opencores.org/cores/sdr_ctrl/
|
http://www.opencores.org/cores/sdr_ctrl/
|
|
|
Description: SDRAM Controller Core Module
|
Description: SDRAM Controller Core Module
|
2 types of SDRAMs are supported, 1Mx16 2 bank, or 4Mx16 4 bank.
|
2 types of SDRAMs are supported, 1Mx16 2 bank, or 4Mx16 4 bank.
|
This block integrate following sub modules
|
This block integrate following sub modules
|
|
|
sdrc_bs_convert
|
sdrc_bs_convert
|
convert the system side 32 bit into equvailent 16/32 SDR format
|
convert the system side 32 bit into equvailent 16/32 SDR format
|
sdrc_req_gen
|
sdrc_req_gen
|
This module takes requests from the app, chops them to burst booundaries
|
This module takes requests from the app, chops them to burst booundaries
|
if wrap=0, decodes the bank and passe the request to bank_ctl
|
if wrap=0, decodes the bank and passe the request to bank_ctl
|
sdrc_xfr_ctl
|
sdrc_xfr_ctl
|
This module takes requests from sdr_bank_ctl, runs the transfer and
|
This module takes requests from sdr_bank_ctl, runs the transfer and
|
controls data flow to/from the app. At the end of the transfer it issues a
|
controls data flow to/from the app. At the end of the transfer it issues a
|
burst terminate if not at the end of a burst and another command to this
|
burst terminate if not at the end of a burst and another command to this
|
bank is not available.
|
bank is not available.
|
|
|
sdrc_bank_ctl
|
sdrc_bank_ctl
|
This module takes requests from sdr_req_gen, checks for page hit/miss and
|
This module takes requests from sdr_req_gen, checks for page hit/miss and
|
issues precharge/activate commands and then passes the request to
|
issues precharge/activate commands and then passes the request to
|
sdr_xfr_ctl.
|
sdr_xfr_ctl.
|
|
|
|
|
Assumption: SDRAM Pads should be placed near to this module. else
|
Assumption: SDRAM Pads should be placed near to this module. else
|
user should add a FF near the pads
|
user should add a FF near the pads
|
|
|
To Do:
|
To Do:
|
nothing
|
nothing
|
|
|
Author(s):
|
Author(s):
|
- Dinesh Annayya, dinesha@opencores.org
|
- Dinesh Annayya, dinesha@opencores.org
|
Version : 1.0 - 8th Jan 2012
|
Version : 1.0 - 8th Jan 2012
|
|
|
|
|
|
|
Copyright (C) 2000 Authors and OPENCORES.ORG
|
Copyright (C) 2000 Authors and OPENCORES.ORG
|
|
|
This source file may be used and distributed without
|
This source file may be used and distributed without
|
restriction provided that this copyright statement is not
|
restriction provided that this copyright statement is not
|
removed from the file and that any derivative work contains
|
removed from the file and that any derivative work contains
|
the original copyright notice and the associated disclaimer.
|
the original copyright notice and the associated disclaimer.
|
|
|
This source file is free software; you can redistribute it
|
This source file is free software; you can redistribute it
|
and/or modify it under the terms of the GNU Lesser General
|
and/or modify it under the terms of the GNU Lesser General
|
Public License as published by the Free Software Foundation;
|
Public License as published by the Free Software Foundation;
|
either version 2.1 of the License, or (at your option) any
|
either version 2.1 of the License, or (at your option) any
|
later version.
|
later version.
|
|
|
This source is distributed in the hope that it will be
|
This source is distributed in the hope that it will be
|
useful, but WITHOUT ANY WARRANTY; without even the implied
|
useful, but WITHOUT ANY WARRANTY; without even the implied
|
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
|
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
|
PURPOSE. See the GNU Lesser General Public License for more
|
PURPOSE. See the GNU Lesser General Public License for more
|
details.
|
details.
|
|
|
You should have received a copy of the GNU Lesser General
|
You should have received a copy of the GNU Lesser General
|
Public License along with this source; if not, download it
|
Public License along with this source; if not, download it
|
from http://www.opencores.org/lgpl.shtml
|
from http://www.opencores.org/lgpl.shtml
|
|
|
*******************************************************************/
|
*******************************************************************/
|
|
|
|
|
`include "sdrc.def"
|
`include "sdrc.def"
|
module sdrc_core
|
module sdrc_core
|
(
|
(
|
clk,
|
clk,
|
pad_clk,
|
pad_clk,
|
reset_n,
|
reset_n,
|
sdr_width,
|
sdr_width,
|
|
cfg_colbits,
|
|
|
/* Request from app */
|
/* Request from app */
|
app_req, // Transfer Request
|
app_req, // Transfer Request
|
app_req_addr, // SDRAM Address
|
app_req_addr, // SDRAM Address
|
app_req_addr_mask, // Address mask for queue wrap
|
app_req_addr_mask, // Address mask for queue wrap
|
app_req_len, // Burst Length (in 16 bit words)
|
app_req_len, // Burst Length (in 16 bit words)
|
app_req_wrap, // Wrap mode request (xfr_len = 4)
|
app_req_wrap, // Wrap mode request (xfr_len = 4)
|
app_req_wr_n, // 0 => Write request, 1 => read req
|
app_req_wr_n, // 0 => Write request, 1 => read req
|
app_req_ack, // Request has been accepted
|
app_req_ack, // Request has been accepted
|
sdr_core_busy_n, // OK to arbitrate next request
|
sdr_core_busy_n, // OK to arbitrate next request
|
cfg_req_depth, //how many req. buffer should hold
|
cfg_req_depth, //how many req. buffer should hold
|
|
|
app_wr_data,
|
app_wr_data,
|
app_wr_en_n,
|
app_wr_en_n,
|
app_rd_data,
|
app_rd_data,
|
app_rd_valid,
|
app_rd_valid,
|
app_wr_next_req,
|
app_wr_next_req,
|
sdr_init_done,
|
sdr_init_done,
|
app_req_dma_last,
|
app_req_dma_last,
|
|
|
/* Interface to SDRAMs */
|
/* Interface to SDRAMs */
|
sdr_cs_n,
|
sdr_cs_n,
|
sdr_cke,
|
sdr_cke,
|
sdr_ras_n,
|
sdr_ras_n,
|
sdr_cas_n,
|
sdr_cas_n,
|
sdr_we_n,
|
sdr_we_n,
|
sdr_dqm,
|
sdr_dqm,
|
sdr_ba,
|
sdr_ba,
|
sdr_addr,
|
sdr_addr,
|
pad_sdr_din,
|
pad_sdr_din,
|
sdr_dout,
|
sdr_dout,
|
sdr_den_n,
|
sdr_den_n,
|
|
|
/* Parameters */
|
/* Parameters */
|
cfg_sdr_en,
|
cfg_sdr_en,
|
cfg_sdr_dev_config, // using 64M/4bank SDRAMs
|
cfg_sdr_dev_config, // using 64M/4bank SDRAMs
|
cfg_sdr_mode_reg,
|
cfg_sdr_mode_reg,
|
cfg_sdr_tras_d,
|
cfg_sdr_tras_d,
|
cfg_sdr_trp_d,
|
cfg_sdr_trp_d,
|
cfg_sdr_trcd_d,
|
cfg_sdr_trcd_d,
|
cfg_sdr_cas,
|
cfg_sdr_cas,
|
cfg_sdr_trcar_d,
|
cfg_sdr_trcar_d,
|
cfg_sdr_twr_d,
|
cfg_sdr_twr_d,
|
cfg_sdr_rfsh,
|
cfg_sdr_rfsh,
|
cfg_sdr_rfmax);
|
cfg_sdr_rfmax);
|
|
|
parameter APP_AW = 30; // Application Address Width
|
parameter APP_AW = 30; // Application Address Width
|
parameter APP_DW = 32; // Application Data Width
|
parameter APP_DW = 32; // Application Data Width
|
parameter APP_BW = 4; // Application Byte Width
|
parameter APP_BW = 4; // Application Byte Width
|
parameter APP_RW = 9; // Application Request Width
|
parameter APP_RW = 9; // Application Request Width
|
|
|
parameter SDR_DW = 16; // SDR Data Width
|
parameter SDR_DW = 16; // SDR Data Width
|
parameter SDR_BW = 2; // SDR Byte Width
|
parameter SDR_BW = 2; // SDR Byte Width
|
|
|
|
|
//-----------------------------------------------
|
//-----------------------------------------------
|
// Global Variable
|
// Global Variable
|
// ----------------------------------------------
|
// ----------------------------------------------
|
input clk ; // SDRAM Clock
|
input clk ; // SDRAM Clock
|
input pad_clk ; // SDRAM Clock from Pad, used for registering Read Data
|
input pad_clk ; // SDRAM Clock from Pad, used for registering Read Data
|
input reset_n ; // Reset Signal
|
input reset_n ; // Reset Signal
|
input sdr_width ; // 0 - 32 Bit SDR, 1 - 16 Bit SDR
|
input sdr_width ; // 0 - 32 Bit SDR, 1 - 16 Bit SDR
|
|
input [1:0] cfg_colbits ; // 2'b00 - 8 Bit column address, 2'b01 - 9 Bit, 10 - 10 bit, 11 - 11Bits
|
|
|
|
|
//------------------------------------------------
|
//------------------------------------------------
|
// Request from app
|
// Request from app
|
//------------------------------------------------
|
//------------------------------------------------
|
input app_req ; // Application Request
|
input app_req ; // Application Request
|
input [APP_AW-1:0] app_req_addr ; // Address
|
input [APP_AW-1:0] app_req_addr ; // Address
|
input [APP_AW-2:0] app_req_addr_mask ; // Address Mask
|
input [APP_AW-2:0] app_req_addr_mask ; // Address Mask
|
input app_req_wr_n ; // 0 - Write, 1 - Read
|
input app_req_wr_n ; // 0 - Write, 1 - Read
|
input app_req_wrap ; // Address Wrap
|
input app_req_wrap ; // Address Wrap
|
output app_req_ack ; // Application Request Ack
|
output app_req_ack ; // Application Request Ack
|
output sdr_core_busy_n ; // 0 - busy, 1 - free
|
output sdr_core_busy_n ; // 0 - busy, 1 - free
|
|
|
input [APP_DW-1:0] app_wr_data ; // Write Data
|
input [APP_DW-1:0] app_wr_data ; // Write Data
|
output app_wr_next_req ; // Next Write Data Request
|
output app_wr_next_req ; // Next Write Data Request
|
input [APP_BW-1:0] app_wr_en_n ; // Byte wise Write Enable
|
input [APP_BW-1:0] app_wr_en_n ; // Byte wise Write Enable
|
output [APP_DW-1:0] app_rd_data ; // Read Data
|
output [APP_DW-1:0] app_rd_data ; // Read Data
|
output app_rd_valid ; // Read Valid
|
output app_rd_valid ; // Read Valid
|
|
|
//------------------------------------------------
|
//------------------------------------------------
|
// Interface to SDRAMs
|
// Interface to SDRAMs
|
//------------------------------------------------
|
//------------------------------------------------
|
output sdr_cke ; // SDRAM CKE
|
output sdr_cke ; // SDRAM CKE
|
output sdr_cs_n ; // SDRAM Chip Select
|
output sdr_cs_n ; // SDRAM Chip Select
|
output sdr_ras_n ; // SDRAM ras
|
output sdr_ras_n ; // SDRAM ras
|
output sdr_cas_n ; // SDRAM cas
|
output sdr_cas_n ; // SDRAM cas
|
output sdr_we_n ; // SDRAM write enable
|
output sdr_we_n ; // SDRAM write enable
|
output [SDR_BW-1:0] sdr_dqm ; // SDRAM Data Mask
|
output [SDR_BW-1:0] sdr_dqm ; // SDRAM Data Mask
|
output [1:0] sdr_ba ; // SDRAM Bank Enable
|
output [1:0] sdr_ba ; // SDRAM Bank Enable
|
output [11:0] sdr_addr ; // SDRAM Address
|
output [11:0] sdr_addr ; // SDRAM Address
|
input [SDR_DW-1:0] pad_sdr_din ; // SDRA Data Input
|
input [SDR_DW-1:0] pad_sdr_din ; // SDRA Data Input
|
output [SDR_DW-1:0] sdr_dout ; // SDRAM Data Output
|
output [SDR_DW-1:0] sdr_dout ; // SDRAM Data Output
|
output [SDR_BW-1:0] sdr_den_n ; // SDRAM Data Output enable
|
output [SDR_BW-1:0] sdr_den_n ; // SDRAM Data Output enable
|
|
|
//------------------------------------------------
|
//------------------------------------------------
|
// Configuration Parameter
|
// Configuration Parameter
|
//------------------------------------------------
|
//------------------------------------------------
|
output sdr_init_done ;
|
output sdr_init_done ; // Indicate SDRAM Initialisation Done
|
input [3:0] cfg_sdr_tras_d ;
|
input [3:0] cfg_sdr_tras_d ; // Active to precharge delay
|
input [3:0] cfg_sdr_trp_d ;
|
input [3:0] cfg_sdr_trp_d ; // Precharge to active delay
|
input [3:0] cfg_sdr_trcd_d ;
|
input [3:0] cfg_sdr_trcd_d ; // Active to R/W delay
|
input cfg_sdr_en ;
|
input cfg_sdr_en ; // Enable SDRAM controller
|
input [1:0] cfg_sdr_dev_config ; // 2'b00 - 8 MB, 01 - 16 MB, 10 - 32 MB , 11 - 64 MB
|
input [1:0] cfg_sdr_dev_config ; // 2'b00 - 8 MB, 01 - 16 MB, 10 - 32 MB , 11 - 64 MB
|
input [1:0] cfg_req_depth ;
|
input [1:0] cfg_req_depth ; // Maximum Request accepted by SDRAM controller
|
input [APP_RW-1:0] app_req_len ;
|
input [APP_RW-1:0] app_req_len ; // Application Burst Request length in 32 bit
|
input [11:0] cfg_sdr_mode_reg ;
|
input [11:0] cfg_sdr_mode_reg ;
|
input [2:0] cfg_sdr_cas ;
|
input [2:0] cfg_sdr_cas ; // SDRAM CAS Latency
|
input [3:0] cfg_sdr_trcar_d ;
|
input [3:0] cfg_sdr_trcar_d ; // Auto-refresh period
|
input [3:0] cfg_sdr_twr_d ;
|
input [3:0] cfg_sdr_twr_d ; // Write recovery delay
|
input [`SDR_RFSH_TIMER_W-1 : 0] cfg_sdr_rfsh;
|
input [`SDR_RFSH_TIMER_W-1 : 0] cfg_sdr_rfsh;
|
input [`SDR_RFSH_ROW_CNT_W -1 : 0] cfg_sdr_rfmax;
|
input [`SDR_RFSH_ROW_CNT_W -1 : 0] cfg_sdr_rfmax;
|
input app_req_dma_last; // this signal should close the bank
|
input app_req_dma_last; // this signal should close the bank
|
|
|
/****************************************************************************/
|
/****************************************************************************/
|
// Internal Nets
|
// Internal Nets
|
|
|
// SDR_REQ_GEN
|
// SDR_REQ_GEN
|
wire r2x_idle, app_req_ack,app_req_ack_int;
|
wire r2x_idle, app_req_ack,app_req_ack_int;
|
wire app_req_dma_last_int;
|
wire app_req_dma_last_int;
|
wire r2b_req, r2b_start, r2b_last, r2b_write;
|
wire r2b_req, r2b_start, r2b_last, r2b_write;
|
wire [`SDR_REQ_ID_W-1:0]r2b_req_id;
|
wire [`SDR_REQ_ID_W-1:0]r2b_req_id;
|
wire [1:0] r2b_ba;
|
wire [1:0] r2b_ba;
|
wire [11:0] r2b_raddr;
|
wire [11:0] r2b_raddr;
|
wire [11:0] r2b_caddr;
|
wire [11:0] r2b_caddr;
|
wire [APP_RW-1:0] r2b_len;
|
wire [APP_RW-1:0] r2b_len;
|
|
|
// SDR BANK CTL
|
// SDR BANK CTL
|
wire b2r_ack, b2x_idle;
|
wire b2r_ack, b2x_idle;
|
wire b2x_req, b2x_start, b2x_last, b2x_tras_ok;
|
wire b2x_req, b2x_start, b2x_last, b2x_tras_ok;
|
wire [`SDR_REQ_ID_W-1:0]b2x_id;
|
wire [`SDR_REQ_ID_W-1:0]b2x_id;
|
wire [1:0] b2x_ba;
|
wire [1:0] b2x_ba;
|
wire b2x_ba_last;
|
wire b2x_ba_last;
|
wire [11:0] b2x_addr;
|
wire [11:0] b2x_addr;
|
wire [APP_RW-1:0] b2x_len;
|
wire [APP_RW-1:0] b2x_len;
|
wire [1:0] b2x_cmd;
|
wire [1:0] b2x_cmd;
|
|
|
// SDR_XFR_CTL
|
// SDR_XFR_CTL
|
wire x2b_ack;
|
wire x2b_ack;
|
wire [3:0] x2b_pre_ok;
|
wire [3:0] x2b_pre_ok;
|
wire x2b_refresh, x2b_act_ok, x2b_rdok, x2b_wrok;
|
wire x2b_refresh, x2b_act_ok, x2b_rdok, x2b_wrok;
|
wire xfr_rdstart, xfr_rdlast;
|
wire xfr_rdstart, xfr_rdlast;
|
wire xfr_wrstart, xfr_wrlast;
|
wire xfr_wrstart, xfr_wrlast;
|
wire [`SDR_REQ_ID_W-1:0]xfr_id;
|
wire [`SDR_REQ_ID_W-1:0]xfr_id;
|
wire [13:0] xfr_addr_msb;
|
wire [13:0] xfr_addr_msb;
|
wire [APP_DW-1:0] app_rd_data;
|
wire [APP_DW-1:0] app_rd_data;
|
wire app_wr_next_req, app_rd_valid;
|
wire app_wr_next_req, app_rd_valid;
|
wire sdr_cs_n, sdr_cke, sdr_ras_n, sdr_cas_n, sdr_we_n;
|
wire sdr_cs_n, sdr_cke, sdr_ras_n, sdr_cas_n, sdr_we_n;
|
wire [SDR_BW-1:0] sdr_dqm;
|
wire [SDR_BW-1:0] sdr_dqm;
|
wire [1:0] sdr_ba;
|
wire [1:0] sdr_ba;
|
wire [11:0] sdr_addr;
|
wire [11:0] sdr_addr;
|
wire [SDR_DW-1:0] sdr_dout;
|
wire [SDR_DW-1:0] sdr_dout;
|
wire [SDR_DW-1:0] sdr_dout_int;
|
wire [SDR_DW-1:0] sdr_dout_int;
|
wire [SDR_BW-1:0] sdr_den_n;
|
wire [SDR_BW-1:0] sdr_den_n;
|
wire [SDR_BW-1:0] sdr_den_n_int;
|
wire [SDR_BW-1:0] sdr_den_n_int;
|
|
|
wire [1:0] xfr_bank_sel;
|
wire [1:0] xfr_bank_sel;
|
wire [1:0] cfg_sdr_dev_config;
|
wire [1:0] cfg_sdr_dev_config;
|
|
|
wire [APP_AW:0] app_req_addr_int;
|
wire [APP_AW:0] app_req_addr_int;
|
wire [APP_AW-1:0] app_req_addr;
|
wire [APP_AW-1:0] app_req_addr;
|
wire [APP_RW-1:0] app_req_len_int;
|
wire [APP_RW-1:0] app_req_len_int;
|
wire [APP_RW-1:0] app_req_len;
|
wire [APP_RW-1:0] app_req_len;
|
|
|
wire [APP_DW-1:0] app_wr_data;
|
wire [APP_DW-1:0] app_wr_data;
|
wire [SDR_DW-1:0] add_wr_data_int;
|
wire [SDR_DW-1:0] add_wr_data_int;
|
wire [APP_BW-1:0] app_wr_en_n;
|
wire [APP_BW-1:0] app_wr_en_n;
|
wire [SDR_BW-1:0] app_wr_en_n_int;
|
wire [SDR_BW-1:0] app_wr_en_n_int;
|
|
|
//wire [31:0] app_rd_data;
|
//wire [31:0] app_rd_data;
|
wire [SDR_DW-1:0] app_rd_data_int;
|
wire [SDR_DW-1:0] app_rd_data_int;
|
|
|
//
|
//
|
wire app_req_int;
|
wire app_req_int;
|
wire r2b_wrap;
|
wire r2b_wrap;
|
wire b2r_arb_ok;
|
wire b2r_arb_ok;
|
wire b2x_wrap;
|
wire b2x_wrap;
|
wire app_wr_next_int;
|
wire app_wr_next_int;
|
wire app_rd_valid_int;
|
wire app_rd_valid_int;
|
|
|
// synopsys translate_off
|
// synopsys translate_off
|
wire [3:0] sdr_cmd;
|
wire [3:0] sdr_cmd;
|
assign sdr_cmd = {sdr_cs_n, sdr_ras_n, sdr_cas_n, sdr_we_n};
|
assign sdr_cmd = {sdr_cs_n, sdr_ras_n, sdr_cas_n, sdr_we_n};
|
// synopsys translate_on
|
// synopsys translate_on
|
|
|
assign sdr_den_n = sdr_width ? {2'b00,sdr_den_n_int[1:0]} : sdr_den_n_int;
|
assign sdr_den_n = sdr_width ? {2'b00,sdr_den_n_int[1:0]} : sdr_den_n_int;
|
assign sdr_dout = sdr_width ? {16'h0000,sdr_dout_int[15:0]} : sdr_dout_int;
|
assign sdr_dout = sdr_width ? {16'h0000,sdr_dout_int[15:0]} : sdr_dout_int;
|
|
|
|
|
/****************************************************************************/
|
/****************************************************************************/
|
// Instantiate sdr_req_gen
|
// Instantiate sdr_req_gen
|
// This module takes requests from the app, chops them to burst booundaries
|
// This module takes requests from the app, chops them to burst booundaries
|
// if wrap=0, decodes the bank and passe the request to bank_ctl
|
// if wrap=0, decodes the bank and passe the request to bank_ctl
|
|
|
sdrc_req_gen #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_req_gen (
|
sdrc_req_gen #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_req_gen (
|
.clk (clk ),
|
.clk (clk ),
|
.reset_n (reset_n ),
|
.reset_n (reset_n ),
|
.sdr_dev_config (cfg_sdr_dev_config ),
|
.sdr_dev_config (cfg_sdr_dev_config ),
|
|
.cfg_colbits (cfg_colbits ),
|
|
|
/* Request from app */
|
/* Request from app */
|
.r2x_idle (r2x_idle ),
|
.r2x_idle (r2x_idle ),
|
.req (app_req_int ),
|
.req (app_req_int ),
|
.req_id (4'b0 ),
|
.req_id (4'b0 ),
|
.req_addr (app_req_addr_int ),
|
.req_addr (app_req_addr_int ),
|
.req_addr_mask (app_req_addr_mask ),
|
.req_addr_mask (app_req_addr_mask ),
|
.req_len (app_req_len_int ),
|
.req_len (app_req_len_int ),
|
.req_wrap (app_req_wrap ),
|
.req_wrap (app_req_wrap ),
|
.req_wr_n (app_req_wr_n ),
|
.req_wr_n (app_req_wr_n ),
|
.req_ack (app_req_ack_int ),
|
.req_ack (app_req_ack_int ),
|
.sdr_core_busy_n (sdr_core_busy_n ),
|
.sdr_core_busy_n (sdr_core_busy_n ),
|
|
|
/* Req to bank_ctl */
|
/* Req to bank_ctl */
|
.r2b_req (r2b_req ),
|
.r2b_req (r2b_req ),
|
.r2b_req_id (r2b_req_id ),
|
.r2b_req_id (r2b_req_id ),
|
.r2b_start (r2b_start ),
|
.r2b_start (r2b_start ),
|
.r2b_last (r2b_last ),
|
.r2b_last (r2b_last ),
|
.r2b_wrap (r2b_wrap ),
|
.r2b_wrap (r2b_wrap ),
|
.r2b_ba (r2b_ba ),
|
.r2b_ba (r2b_ba ),
|
.r2b_raddr (r2b_raddr ),
|
.r2b_raddr (r2b_raddr ),
|
.r2b_caddr (r2b_caddr ),
|
.r2b_caddr (r2b_caddr ),
|
.r2b_len (r2b_len ),
|
.r2b_len (r2b_len ),
|
.r2b_write (r2b_write ),
|
.r2b_write (r2b_write ),
|
.b2r_ack (b2r_ack ),
|
.b2r_ack (b2r_ack ),
|
.b2r_arb_ok (b2r_arb_ok ),
|
.b2r_arb_ok (b2r_arb_ok ),
|
.sdr_width (sdr_width ),
|
.sdr_width (sdr_width ),
|
.sdr_init_done (sdr_init_done )
|
.sdr_init_done (sdr_init_done )
|
);
|
);
|
|
|
/****************************************************************************/
|
/****************************************************************************/
|
// Instantiate sdr_bank_ctl
|
// Instantiate sdr_bank_ctl
|
// This module takes requests from sdr_req_gen, checks for page hit/miss and
|
// This module takes requests from sdr_req_gen, checks for page hit/miss and
|
// issues precharge/activate commands and then passes the request to
|
// issues precharge/activate commands and then passes the request to
|
// sdr_xfr_ctl.
|
// sdr_xfr_ctl.
|
|
|
sdrc_bank_ctl #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_bank_ctl (
|
sdrc_bank_ctl #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_bank_ctl (
|
.clk (clk ),
|
.clk (clk ),
|
.reset_n (reset_n ),
|
.reset_n (reset_n ),
|
.a2b_req_depth (cfg_req_depth ),
|
.a2b_req_depth (cfg_req_depth ),
|
|
|
/* Req from req_gen */
|
/* Req from req_gen */
|
.r2b_req (r2b_req ),
|
.r2b_req (r2b_req ),
|
.r2b_req_id (r2b_req_id ),
|
.r2b_req_id (r2b_req_id ),
|
.r2b_start (r2b_start ),
|
.r2b_start (r2b_start ),
|
.r2b_last (r2b_last ),
|
.r2b_last (r2b_last ),
|
.r2b_wrap (r2b_wrap ),
|
.r2b_wrap (r2b_wrap ),
|
.r2b_ba (r2b_ba ),
|
.r2b_ba (r2b_ba ),
|
.r2b_raddr (r2b_raddr ),
|
.r2b_raddr (r2b_raddr ),
|
.r2b_caddr (r2b_caddr ),
|
.r2b_caddr (r2b_caddr ),
|
.r2b_len (r2b_len ),
|
.r2b_len (r2b_len ),
|
.r2b_write (r2b_write ),
|
.r2b_write (r2b_write ),
|
.b2r_arb_ok (b2r_arb_ok ),
|
.b2r_arb_ok (b2r_arb_ok ),
|
.b2r_ack (b2r_ack ),
|
.b2r_ack (b2r_ack ),
|
|
|
/* Transfer request to xfr_ctl */
|
/* Transfer request to xfr_ctl */
|
.b2x_idle (b2x_idle ),
|
.b2x_idle (b2x_idle ),
|
.b2x_req (b2x_req ),
|
.b2x_req (b2x_req ),
|
.b2x_start (b2x_start ),
|
.b2x_start (b2x_start ),
|
.b2x_last (b2x_last ),
|
.b2x_last (b2x_last ),
|
.b2x_wrap (b2x_wrap ),
|
.b2x_wrap (b2x_wrap ),
|
.b2x_id (b2x_id ),
|
.b2x_id (b2x_id ),
|
.b2x_ba (b2x_ba ),
|
.b2x_ba (b2x_ba ),
|
.b2x_addr (b2x_addr ),
|
.b2x_addr (b2x_addr ),
|
.b2x_len (b2x_len ),
|
.b2x_len (b2x_len ),
|
.b2x_cmd (b2x_cmd ),
|
.b2x_cmd (b2x_cmd ),
|
.x2b_ack (x2b_ack ),
|
.x2b_ack (x2b_ack ),
|
|
|
/* Status from xfr_ctl */
|
/* Status from xfr_ctl */
|
.b2x_tras_ok (b2x_tras_ok ),
|
.b2x_tras_ok (b2x_tras_ok ),
|
.x2b_refresh (x2b_refresh ),
|
.x2b_refresh (x2b_refresh ),
|
.x2b_pre_ok (x2b_pre_ok ),
|
.x2b_pre_ok (x2b_pre_ok ),
|
.x2b_act_ok (x2b_act_ok ),
|
.x2b_act_ok (x2b_act_ok ),
|
.x2b_rdok (x2b_rdok ),
|
.x2b_rdok (x2b_rdok ),
|
.x2b_wrok (x2b_wrok ),
|
.x2b_wrok (x2b_wrok ),
|
|
|
/* for generate cuurent xfr address msb */
|
/* for generate cuurent xfr address msb */
|
.sdr_dev_config (cfg_sdr_dev_config ),
|
.sdr_dev_config (cfg_sdr_dev_config ),
|
.sdr_req_norm_dma_last(app_req_dma_last_int),
|
.sdr_req_norm_dma_last(app_req_dma_last_int),
|
.xfr_bank_sel (xfr_bank_sel ),
|
.xfr_bank_sel (xfr_bank_sel ),
|
.xfr_addr_msb (xfr_addr_msb ),
|
.xfr_addr_msb (xfr_addr_msb ),
|
|
|
/* SDRAM Timing */
|
/* SDRAM Timing */
|
.tras_delay (cfg_sdr_tras_d ),
|
.tras_delay (cfg_sdr_tras_d ),
|
.trp_delay (cfg_sdr_trp_d ),
|
.trp_delay (cfg_sdr_trp_d ),
|
.trcd_delay (cfg_sdr_trcd_d )
|
.trcd_delay (cfg_sdr_trcd_d )
|
);
|
);
|
|
|
/****************************************************************************/
|
/****************************************************************************/
|
// Instantiate sdr_xfr_ctl
|
// Instantiate sdr_xfr_ctl
|
// This module takes requests from sdr_bank_ctl, runs the transfer and
|
// This module takes requests from sdr_bank_ctl, runs the transfer and
|
// controls data flow to/from the app. At the end of the transfer it issues a
|
// controls data flow to/from the app. At the end of the transfer it issues a
|
// burst terminate if not at the end of a burst and another command to this
|
// burst terminate if not at the end of a burst and another command to this
|
// bank is not available.
|
// bank is not available.
|
|
|
sdrc_xfr_ctl #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_xfr_ctl (
|
sdrc_xfr_ctl #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_xfr_ctl (
|
.clk (clk ),
|
.clk (clk ),
|
.reset_n (reset_n ),
|
.reset_n (reset_n ),
|
|
|
/* Transfer request from bank_ctl */
|
/* Transfer request from bank_ctl */
|
.r2x_idle (r2x_idle ),
|
.r2x_idle (r2x_idle ),
|
.b2x_idle (b2x_idle ),
|
.b2x_idle (b2x_idle ),
|
.b2x_req (b2x_req ),
|
.b2x_req (b2x_req ),
|
.b2x_start (b2x_start ),
|
.b2x_start (b2x_start ),
|
.b2x_last (b2x_last ),
|
.b2x_last (b2x_last ),
|
.b2x_wrap (b2x_wrap ),
|
.b2x_wrap (b2x_wrap ),
|
.b2x_id (b2x_id ),
|
.b2x_id (b2x_id ),
|
.b2x_ba (b2x_ba ),
|
.b2x_ba (b2x_ba ),
|
.b2x_addr (b2x_addr ),
|
.b2x_addr (b2x_addr ),
|
.b2x_len (b2x_len ),
|
.b2x_len (b2x_len ),
|
.b2x_cmd (b2x_cmd ),
|
.b2x_cmd (b2x_cmd ),
|
.x2b_ack (x2b_ack ),
|
.x2b_ack (x2b_ack ),
|
|
|
/* Status to bank_ctl, req_gen */
|
/* Status to bank_ctl, req_gen */
|
.b2x_tras_ok (b2x_tras_ok ),
|
.b2x_tras_ok (b2x_tras_ok ),
|
.x2b_refresh (x2b_refresh ),
|
.x2b_refresh (x2b_refresh ),
|
.x2b_pre_ok (x2b_pre_ok ),
|
.x2b_pre_ok (x2b_pre_ok ),
|
.x2b_act_ok (x2b_act_ok ),
|
.x2b_act_ok (x2b_act_ok ),
|
.x2b_rdok (x2b_rdok ),
|
.x2b_rdok (x2b_rdok ),
|
.x2b_wrok (x2b_wrok ),
|
.x2b_wrok (x2b_wrok ),
|
|
|
/* SDRAM I/O */
|
/* SDRAM I/O */
|
.sdr_cs_n (sdr_cs_n ),
|
.sdr_cs_n (sdr_cs_n ),
|
.sdr_cke (sdr_cke ),
|
.sdr_cke (sdr_cke ),
|
.sdr_ras_n (sdr_ras_n ),
|
.sdr_ras_n (sdr_ras_n ),
|
.sdr_cas_n (sdr_cas_n ),
|
.sdr_cas_n (sdr_cas_n ),
|
.sdr_we_n (sdr_we_n ),
|
.sdr_we_n (sdr_we_n ),
|
.sdr_dqm (sdr_dqm ),
|
.sdr_dqm (sdr_dqm ),
|
.sdr_ba (sdr_ba ),
|
.sdr_ba (sdr_ba ),
|
.sdr_addr (sdr_addr ),
|
.sdr_addr (sdr_addr ),
|
.sdr_din (pad_sdr_din ),
|
.sdr_din (pad_sdr_din ),
|
.sdr_dout (sdr_dout_int ),
|
.sdr_dout (sdr_dout_int ),
|
.sdr_den_n (sdr_den_n_int ),
|
.sdr_den_n (sdr_den_n_int ),
|
|
|
/* Data Flow to the app */
|
/* Data Flow to the app */
|
.x2a_rdstart (xfr_rdstart ),
|
.x2a_rdstart (xfr_rdstart ),
|
.x2a_wrstart (xfr_wrstart ),
|
.x2a_wrstart (xfr_wrstart ),
|
.x2a_id (xfr_id ),
|
.x2a_id (xfr_id ),
|
.x2a_rdlast (xfr_rdlast ),
|
.x2a_rdlast (xfr_rdlast ),
|
.x2a_wrlast (xfr_wrlast ),
|
.x2a_wrlast (xfr_wrlast ),
|
.app_wrdt (add_wr_data_int ),
|
.app_wrdt (add_wr_data_int ),
|
.app_wren_n (app_wr_en_n_int ),
|
.app_wren_n (app_wr_en_n_int ),
|
.x2a_wrnext (app_wr_next_int ),
|
.x2a_wrnext (app_wr_next_int ),
|
.x2a_rddt (app_rd_data_int ),
|
.x2a_rddt (app_rd_data_int ),
|
.x2a_rdok (app_rd_valid_int ),
|
.x2a_rdok (app_rd_valid_int ),
|
.sdr_init_done (sdr_init_done ),
|
.sdr_init_done (sdr_init_done ),
|
|
|
/* SDRAM Parameters */
|
/* SDRAM Parameters */
|
.sdram_enable (cfg_sdr_en ),
|
.sdram_enable (cfg_sdr_en ),
|
.sdram_mode_reg (cfg_sdr_mode_reg ),
|
.sdram_mode_reg (cfg_sdr_mode_reg ),
|
|
|
/* current xfr bank */
|
/* current xfr bank */
|
.xfr_bank_sel (xfr_bank_sel ),
|
.xfr_bank_sel (xfr_bank_sel ),
|
|
|
/* SDRAM Timing */
|
/* SDRAM Timing */
|
.cas_latency (cfg_sdr_cas ),
|
.cas_latency (cfg_sdr_cas ),
|
.trp_delay (cfg_sdr_trp_d ),
|
.trp_delay (cfg_sdr_trp_d ),
|
.trcar_delay (cfg_sdr_trcar_d ),
|
.trcar_delay (cfg_sdr_trcar_d ),
|
.twr_delay (cfg_sdr_twr_d ),
|
.twr_delay (cfg_sdr_twr_d ),
|
.rfsh_time (cfg_sdr_rfsh ),
|
.rfsh_time (cfg_sdr_rfsh ),
|
.rfsh_rmax (cfg_sdr_rfmax )
|
.rfsh_rmax (cfg_sdr_rfmax )
|
);
|
);
|
|
|
sdrc_bs_convert #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_bs_convert (
|
sdrc_bs_convert #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_bs_convert (
|
.clk (clk ),
|
.clk (clk ),
|
.reset_n (reset_n ),
|
.reset_n (reset_n ),
|
.sdr_width (sdr_width ),
|
.sdr_width (sdr_width ),
|
|
|
.app_req_addr (app_req_addr ),
|
.app_req_addr (app_req_addr ),
|
.app_req_addr_int (app_req_addr_int ),
|
.app_req_addr_int (app_req_addr_int ),
|
.app_req_len (app_req_len ),
|
.app_req_len (app_req_len ),
|
.app_req_len_int (app_req_len_int ),
|
.app_req_len_int (app_req_len_int ),
|
.app_sdr_req (app_req ),
|
.app_sdr_req (app_req ),
|
.app_sdr_req_int (app_req_int ),
|
.app_sdr_req_int (app_req_int ),
|
.app_req_dma_last (app_req_dma_last ),
|
.app_req_dma_last (app_req_dma_last ),
|
.app_req_dma_last_int(app_req_dma_last_int),
|
.app_req_dma_last_int(app_req_dma_last_int),
|
.app_req_wr_n (app_req_wr_n ),
|
.app_req_wr_n (app_req_wr_n ),
|
.app_req_ack_int (app_req_ack_int ),
|
.app_req_ack_int (app_req_ack_int ),
|
.app_req_ack (app_req_ack ),
|
.app_req_ack (app_req_ack ),
|
|
|
.app_wr_data (app_wr_data ),
|
.app_wr_data (app_wr_data ),
|
.app_wr_data_int (add_wr_data_int ),
|
.app_wr_data_int (add_wr_data_int ),
|
.app_wr_en_n (app_wr_en_n ),
|
.app_wr_en_n (app_wr_en_n ),
|
.app_wr_en_n_int (app_wr_en_n_int ),
|
.app_wr_en_n_int (app_wr_en_n_int ),
|
.app_wr_next_int (app_wr_next_int ),
|
.app_wr_next_int (app_wr_next_int ),
|
.app_wr_next (app_wr_next_req ),
|
.app_wr_next (app_wr_next_req ),
|
|
|
.app_rd_data_int (app_rd_data_int ),
|
.app_rd_data_int (app_rd_data_int ),
|
.app_rd_data (app_rd_data ),
|
.app_rd_data (app_rd_data ),
|
.app_rd_valid_int (app_rd_valid_int ),
|
.app_rd_valid_int (app_rd_valid_int ),
|
.app_rd_valid (app_rd_valid )
|
.app_rd_valid (app_rd_valid )
|
);
|
);
|
|
|
endmodule // sdrc_core
|
endmodule // sdrc_core
|
|
|
