OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [bench/] [cpp/] [Makefile] - Diff between revs 197 and 202

Go to most recent revision | Show entire file | Details | Blame | View Log

Rev 197 Rev 202
Line 2... Line 2...
#
#
# Filename:     Makefile
# Filename:     Makefile
#
#
# Project:      Zip CPU -- a small, lightweight, RISC CPU soft core
# Project:      Zip CPU -- a small, lightweight, RISC CPU soft core
#
#
# Purpose:      This makefile builds the final verilator simulation of the
# Purpose:      To direct and simplify the build of a variety of simple test
#               zipsystem.  Specifically, it builds the final C++ portion
#               programs which will use one (or both) of the ZipCPU simulators.
#       of the simulator, and thus the final simulator executable.
#
#
# Targets include:
#       This simulator depends upon the ncurses library.
#
#
#               helloworld
#       Useful targets of this makefile include:
#
#
 
#       zippy_tb (default)
 
#               This is the test bench program / simulator that is built by
 
#               this directory.
 
#
 
#       test
 
#               Runs the simulator on a test program found in the trunk/sw/zasm
 
#               directory.  That program needs to be built via 'make test' in
 
#               that directory before this make test will work.  Changes to the
 
#               test itself will require a 'make test' in trunk/sw/zasm as well
 
#               as 'make test' in this directory.
 
#
 
#               The test itself consists of two tests.  The first, the "step"
 
#               test, tests whether the test works via "step"ing the CPU.
 
#               This would be the interface to the CPU were the CPU placed in
 
#               a device.
 
#
 
#               The second test is an internal test which works by just running
 
#               the CPU without step instructions.
 
#
 
#               In either case the test is over upon reaching either a HALT
 
#               or a BUSY instruction.  A HALT instruction indicates success,
 
#               BUSY a failure.
 
#
 
#       stest
 
#               Runs the test in "step" mode as described above.
 
#
 
#       itest
 
#               Runs the test file in interactive mode.  The CPU will not
 
#               execute any instructions without user interaction.  This is
 
#               useful for actually debugging the test.  The other two modes
 
#               are useful for quickly determining that the CPU does (or
 
#               doesn't) work.
 
#
 
#       dhrystone
 
#               Runs a hand-optimized version of the dhrystone benchmark.
 
#               Using the instructions at the top of the dhrystone assembly
 
#               file, you should be able to convert the result to DMIPS or even
 
#               DMIPS/MHz.
 
#
 
#       div_tb
 
#               A raw test bench to test the divide unit separate from the
 
#               rest of the CPU.  This test will fail with a failed assert()
 
#               if unsuccessful, or complete with no error (but lots of
 
#               debugging output) if successful.  To actually run this test,
 
#               you'll need to run ./div_tb (no arguments necessary).
 
#
 
#       mpy_tb
 
#               A raw test bench to test the multiply instructions within the
 
#               cpuops (ALU) unit separate from the rest of the CPU.  For more
 
#               details, look at the usage statement wtihin mpy_tb.
 
#
 
#       zipmmu_tb
 
#               Like div_tb, this is another raw component test bench.  In this
 
#               case, zipmmu_tb tests whether or not the MMU works when
 
#               separated from the rest of the CPU.
 
#
 
#       pdump
 
#               zippy_tb can be configured to produce a profile output that is
 
#               very useful when debugging the Dhrystone benchmark.  (It is
 
#               so configured by default.)  This file will be name pfile.bin.
 
#               pdump is a very simple program designed to read this file and
 
#               produce some (very raw) information from it.  To use this,
 
#               type pdump and the name of the executable file, such as
 
#               ../asm/zipdhry.z, and examine how many times each instruction
 
#               was executed, and how many stalls took place between each
 
#               instruction and the next.
 
#
 
#       clean
 
#               Removes all products of compilation--specifically zippy_tb,
 
#               pdump and div_tb.
 
#
#
#
#
# Creator:      Dan Gisselquist, Ph.D.
# Creator:      Dan Gisselquist, Ph.D.
#               Gisselquist Technology, LLC
#               Gisselquist Technology, LLC
#
#
################################################################################
################################################################################
#
#
# Copyright (C) 2015-2016, Gisselquist Technology, LLC
# Copyright (C) 2017, Gisselquist Technology, LLC
#
#
# This program is free software (firmware): you can redistribute it and/or
# This program is free software (firmware): you can redistribute it and/or
# modify it under the terms of  the GNU General Public License as published
# modify it under the terms of  the GNU General Public License as published
# by the Free Software Foundation, either version 3 of the License, or (at
# by the Free Software Foundation, either version 3 of the License, or (at
# your option) any later version.
# your option) any later version.
Line 99... Line 28...
# This program is distributed in the hope that it will be useful, but WITHOUT
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
# ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
# for more details.
#
#
 
# You should have received a copy of the GNU General Public License along
 
# with this program.  (It's in the $(ROOT)/doc directory.  Run make with no
 
# target there if the PDF file isn't present.)  If not, see
 
#  for a copy.
 
#
# License:      GPL, v3, as defined and found on www.gnu.org,
# License:      GPL, v3, as defined and found on www.gnu.org,
#               http://www.gnu.org/licenses/gpl.html
#               http://www.gnu.org/licenses/gpl.html
#
#
#
#
################################################################################
################################################################################
#
#
all: zippy_tb pdump div_tb mpy_tb
.PHONY: all
 
all: helloworld
 
 
 
CC      := zip-gcc
 
OBJDUMP := zip-objdump
 
OBJDIR := obj-zip
 
CFLAGS := -O3
 
LIBD   := ../../sw/install/cross-tools/zip/lib
 
LIBS   := -L$(LIBD) -lzipbasic
 
SOURCES:= helloworld.c
 
LDSCRIPT:= ../zipsim.ld
 
 
 
$(OBJDIR)/%.o: %.c
 
        $(CC) $(CFLAGS) -c $< -o $@
 
 
 
helloworld: $(OBJDIR)/helloworld.o
 
        $(CC) -T $(LDSCRIPT) $(CFLAGS) $(LIBD)/crt0.o $(LIBS) $< -o $@
 
 
 
helloworld.txt: helloworld
 
        $(OBJDUMP) -dr $< > $@
 
 
 
define  build-depends
 
        $(CC) $(CFLAGS) -MM $(SOURCES) > $(OBJDIR)/xdepends.txt
 
        sed -e 's/^.*.o: /$(OBJDIR)\/&/' < $(OBJDIR)/xdepends.txt > $(OBJDIR)/depends.txt
 
        @rm -f $(OBJDIR)/xdepends.txt
 
endef
 
 
 
tags: $(SOURCES)
 
        @ctags $(SOURCES)
 
 
 
.PHONY: depends
 
depends: tags $(OBJDIR)/
 
        $(build-depends)
 
 
CXX     := g++
$(OBJDIR)/:
FLAGS   := -Wall -Og -g
        @bash -c "if [[ ! -e $(OBJDIR) ]]; then mkdir -p $(OBJDIR)/; fi"
ZASM    := ../../sw/zasm
 
RTLD    := ../../rtl
 
VERILATOR_ROOT ?= $(shell bash -c 'verilator -V|grep VERILATOR_ROOT | head -1 | sed -e " s/^.*=\s*//"')
 
VROOT   := $(VERILATOR_ROOT)
 
INCS    := -I$(RTLD)/obj_dir/ -I$(RTLD) -I$(VROOT)/include -I$(ZASM)
 
SOURCES := zippy_tb.cpp memsim.cpp twoc.cpp $(ZASM)/zopcodes.cpp $(ZASM)/zparser.cpp
 
VLIB    := $(VROOT)/include/verilated.cpp
 
RAWLIB  := $(VLIB) $(RTLD)/obj_dir/Vzipsystem__ALL.a
 
LIBS    := $(RAWLIB) -lncurses -lelf
 
TESTF   := $(ZASM)/z.out
 
DHRYSTONEF := ../asm/zipdhry.z
 
 
 
zippy_tb: $(SOURCES) $(RAWLIB) $(ZASM)/zopcodes.h $(ZASM)/zparser.h testb.h
 
zippy_tb: $(RTLD)/cpudefs.h
 
        $(CXX) $(FLAGS) $(INCS) $(SOURCES) $(LIBS) -o $@
 
 
 
div_tb: div_tb.cpp twoc.cpp $(VLIB) $(RTLD)/obj_dir/Vdiv__ALL.a testb.h
 
        $(CXX) $(FLAGS) $(INCS) div_tb.cpp twoc.cpp $(VLIB) $(RTLD)/obj_dir/Vdiv__ALL.a -o $@
 
 
 
mpy_tb: mpy_tb.cpp twoc.cpp $(VLIB) $(RTLD)/obj_dir/Vcpuops__ALL.a testb.h
 
        $(CXX) $(FLAGS) $(INCS) mpy_tb.cpp twoc.cpp $(VLIB) $(RTLD)/obj_dir/Vcpuops__ALL.a -o $@
 
 
 
zipmmu_tb: zipmmu_tb.cpp $(VLIB) ../rtl/obj_dir/Vzipmmu_tb__ALL.a
 
        $(CXX) $(FLAGS) $(INCS) -I ../rtl/obj_dir zipmmu_tb.cpp $(VLIB) ../rtl/obj_dir/Vzipmmu_tb__ALL.a -o $@
 
 
 
pdump: pdump.cpp $(ZASM)/zopcodes.cpp $(ZASM)/zparser.cpp
 
pdump: $(ZASM)/zopcodes.h $(ZASM)/zparser.h testb.h twoc.cpp
 
        $(CXX) $(FLAGS) $(INCS) pdump.cpp $(ZASM)/zopcodes.cpp $(ZASM)/zparser.cpp twoc.cpp -lelf -o $@
 
 
 
.PHONY: stest
 
stest: zippy_tb
 
        ./zippy_tb -s $(TESTF)
 
 
 
.PHONY: itest
 
itest: zippy_tb
 
        ./zippy_tb $(TESTF)
 
 
 
.PHONY: test
 
test: zippy_tb stest
 
        ./zippy_tb -a $(TESTF)
 
 
 
.PHONY: dhrystone
 
dhrystone: zippy_tb
 
        ./zippy_tb -a $(DHRYSTONEF)
 
 
 
.PHONY: clean
.PHONY: clean
clean:
clean:
        rm ./zippy_tb pdump div_tb mpy_tb
        rm -rf helloworld
        rm -rf helloworld
        rm -rf helloworld

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.