OpenCores
URL https://opencores.org/ocsvn/ahb_master/ahb_master/trunk

Subversion Repositories ahb_master

[/] [ahb_master/] [trunk/] [src/] [base/] [axi2ahb_rd_fifo.v] - Rev 7

Go to most recent revision | Compare with Previous | Blame | View Log

 
INCLUDE def_axi2ahb.txt
OUTFILE PREFIX_axi2ahb_rd_fifo.v
 
module  PREFIX_axi2ahb_rd_fifo (PORTS);
 
   parameter              FIFO_LINES = EXPR(2 * 16); //double buffer of max burst
   parameter              RESP_SLVERR = 2'b10;
 
   input                  clk;
   input                  reset;
 
   port                   RGROUP_AXI_R;
   input [DATA_BITS-1:0]  HRDATA;
   input                  HREADY;
   input [1:0]            HTRANS;
   input                  HRESP;
 
   input [ID_BITS-1:0]    cmd_id;
   input                  cmd_err;
   input                  rdata_phase;
   output                 rdata_ready;
   input                  data_last;
 
 
   wire                   data_push;
   wire                   data_pop;
   wire                   data_empty;
   wire                   data_full;
 
   reg                    RVALID;
 
   reg [LOG2(CMD_DEPTH):0] burst_cnt;
 
   wire                   axi_last;
   wire                   ahb_last;
   wire [1:0]             cmd_resp;
 
 
   assign                 cmd_resp = cmd_err | HRESP ? RESP_SLVERR : 2'b00;
 
   assign                 rdata_ready = burst_cnt < 'd2;
 
   assign                 data_push = rdata_phase & HREADY;
   assign                 data_pop = RVALID & RREADY;
 
   assign                 axi_last = RVALID & RREADY & RLAST;
   assign                 ahb_last = rdata_phase & data_last;
 
   always @(posedge clk or posedge reset)
     if (reset)
       burst_cnt <= #FFD 'd0;
     else if (axi_last | ahb_last)
       burst_cnt <= #FFD burst_cnt - axi_last + ahb_last;
 
   prgen_fifo #(DATA_BITS+ID_BITS+2+1, FIFO_LINES) 
   data_fifo(
	    .clk(clk),
	    .reset(reset),
	    .push(data_push),
	    .pop(data_pop),
	    .din({HRDATA,
                  cmd_id,
                  cmd_resp,
                  ahb_last
		  }
		 ),
	    .dout({RDATA,
                   RID,
                   RRESP,
                   RLAST
		   }
		  ),
	    .empty(data_empty),
	    .full(data_full)
	    );
 
 
   always @(posedge clk or posedge reset)
     if (reset)
       RVALID <= #FFD 1'b0;
     else if (axi_last)
       RVALID <= #FFD 1'b0;
     else if (burst_cnt > 'd0)
       RVALID <= #FFD 1'b1;
     else
       RVALID <= #FFD 1'b0;
 
 
endmodule
 
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.