URL
https://opencores.org/ocsvn/amber/amber/trunk
Subversion Repositories amber
[/] [amber/] [trunk/] [hw/] [fpga/] [bin/] [xs6_constraints.ucf] - Rev 43
Go to most recent revision | Compare with Previous | Blame | View Log
# ----------------------------------------------------------------
# //
# Xilinx FPGA synthesis constraints file //
# //
# This file is part of the Amber project //
# http://www.opencores.org/project,amber //
# //
# Description //
# //
# Author(s): //
# - Conor Santifort, csantifort.amber@gmail.com //
# //
#/ ///////////////////////////////////////////////////////////////
# //
# Copyright (C) 2010 Authors and OPENCORES.ORG //
# //
# This source file may be used and distributed without //
# restriction provided that this copyright statement is not //
# removed from the file and that any derivative work contains //
# the original copyright notice and the associated disclaimer. //
# //
# This source file is free software; you can redistribute it //
# and/or modify it under the terms of the GNU Lesser General //
# Public License as published by the Free Software Foundation; //
# either version 2.1 of the License, or (at your option) any //
# later version. //
# //
# This source is distributed in the hope that it will be //
# useful, but WITHOUT ANY WARRANTY; without even the implied //
# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //
# PURPOSE. See the GNU Lesser General Public License for more //
# details. //
# //
# You should have received a copy of the GNU Lesser General //
# Public License along with this source; if not, download it //
# from http://www.opencores.org/lgpl.shtml //
# //
# ----------------------------------------------------------------
############################################################################
# VCC AUX VOLTAGE
############################################################################
CONFIG VCCAUX=2.5;
############################################################################
## Clock constraints
############################################################################
# 200MHz board clock that feeds the PLL
NET "u_clocks_resets/brd_clk_ibufg" TNM_NET = "BRD_CLK";
TIMESPEC "TS_PLL_CLK" = PERIOD "BRD_CLK" 5.0 ns HIGH 50 %;
# 25 MHz Ethernet MII transmit clock
NET "mtx_clk_pad_i" TNM_NET = "MTX_CLK";
TIMESPEC "TS_MTX_CLK" = PERIOD "MTX_CLK" 40.0 ns HIGH 50 %;
# 25 MHz Ethernet MII receive clock
NET "mrx_clk_pad_i" TNM_NET = "MRX_CLK";
TIMESPEC "TS_MRX_CLK" = PERIOD "MRX_CLK" 40.0 ns HIGH 50 %;
# False paths between clocks
PIN "u_mcb_ddr3/memc3_infrastructure_inst/u_pll_adv.CLKOUT3" TNM = "DDR_CLK";
PIN "u_clocks_resets/u_pll_adv.CLKOUT2" TNM = "SYS_CLK";
TIMESPEC "TS_false1" = FROM "DDR_CLK" TO "SYS_CLK" TIG;
############################################################################
## I/O TERMINATION
############################################################################
NET "ddr3_dq[*]" IN_TERM = UNTUNED_SPLIT_50;
NET "ddr3_dqs_p[*]" IN_TERM = UNTUNED_SPLIT_50;
NET "ddr3_dqs_n[*]" IN_TERM = UNTUNED_SPLIT_50;
############################################################################
# I/O STANDARDS
############################################################################
NET "ddr3_dq[*]" IOSTANDARD = SSTL15_II;
NET "ddr3_addr[*]" IOSTANDARD = SSTL15_II;
NET "ddr3_ba[*]" IOSTANDARD = SSTL15_II;
NET "ddr3_dqs_p[*]" IOSTANDARD = DIFF_SSTL15_II;
NET "ddr3_dqs_n[*]" IOSTANDARD = DIFF_SSTL15_II;
NET "ddr3_ck_p" IOSTANDARD = DIFF_SSTL15_II;
NET "ddr3_ck_n" IOSTANDARD = DIFF_SSTL15_II;
NET "ddr3_cke" IOSTANDARD = SSTL15_II;
NET "ddr3_ras_n" IOSTANDARD = SSTL15_II;
NET "ddr3_cas_n" IOSTANDARD = SSTL15_II;
NET "ddr3_we_n" IOSTANDARD = SSTL15_II;
NET "ddr3_odt" IOSTANDARD = SSTL15_II;
NET "ddr3_reset_n" IOSTANDARD = SSTL15_II;
NET "ddr3_dm[*]" IOSTANDARD = SSTL15_II;
NET "mcb3_rzq" IOSTANDARD = SSTL15_II;
NET "mcb3_zio" IOSTANDARD = SSTL15_II;
NET "brd_clk_p" IOSTANDARD = LVDS_25;
NET "brd_clk_n" IOSTANDARD = LVDS_25;
NET "brd_rst" IOSTANDARD = LVCMOS15;
NET "mtx_clk_pad_i" IOSTANDARD = LVCMOS25;
NET "mtxd_pad_o[*]" IOSTANDARD = LVCMOS25;
NET "mtxen_pad_o" IOSTANDARD = LVCMOS25;
NET "mtxerr_pad_o" IOSTANDARD = LVCMOS25;
NET "mrx_clk_pad_i" IOSTANDARD = LVCMOS25;
NET "mrxd_pad_i[*]" IOSTANDARD = LVCMOS25;
NET "mrxdv_pad_i" IOSTANDARD = LVCMOS25;
NET "mrxerr_pad_i" IOSTANDARD = LVCMOS25;
NET "mcoll_pad_i" IOSTANDARD = LVCMOS25;
NET "mcrs_pad_i" IOSTANDARD = LVCMOS25;
NET "md_pad_io" IOSTANDARD = LVCMOS25;
NET "mdc_pad_o" IOSTANDARD = LVCMOS25;
NET "phy_reset_n" IOSTANDARD = LVCMOS25;
############################################################################
# Pin Location Constraints
############################################################################
NET "brd_rst" LOC = H8;
NET "brd_clk_n" LOC = K22;
NET "brd_clk_p" LOC = K21;
NET "o_uart0_cts" LOC = F18;
NET "i_uart0_rts" LOC = F19;
NET "o_uart0_rx" LOC = B21;
NET "i_uart0_tx" LOC = H17;
############################################################################
# DDR3 Interface pin locations
############################################################################
NET "ddr3_addr[0]" LOC = "K2" ;
NET "ddr3_addr[10]" LOC = "J4" ;
NET "ddr3_addr[11]" LOC = "E1" ;
NET "ddr3_addr[12]" LOC = "F1" ;
NET "ddr3_addr[1]" LOC = "K1" ;
NET "ddr3_addr[2]" LOC = "K5" ;
NET "ddr3_addr[3]" LOC = "M6" ;
NET "ddr3_addr[4]" LOC = "H3" ;
NET "ddr3_addr[5]" LOC = "M3" ;
NET "ddr3_addr[6]" LOC = "L4" ;
NET "ddr3_addr[7]" LOC = "K6" ;
NET "ddr3_addr[8]" LOC = "G3" ;
NET "ddr3_addr[9]" LOC = "G1" ;
NET "ddr3_ba[0]" LOC = "J3" ;
NET "ddr3_ba[1]" LOC = "J1" ;
NET "ddr3_ba[2]" LOC = "H1" ;
NET "ddr3_cas_n" LOC = "M4" ;
NET "ddr3_ck_p" LOC = "K4" ;
NET "ddr3_ck_n" LOC = "K3" ;
NET "ddr3_cke" LOC = "F2" ;
NET "ddr3_dm[0]" LOC = "N4" ;
NET "ddr3_dq[0]" LOC = "R3" ;
NET "ddr3_dq[10]" LOC = "U3" ;
NET "ddr3_dq[11]" LOC = "U1" ;
NET "ddr3_dq[12]" LOC = "W3" ;
NET "ddr3_dq[13]" LOC = "W1" ;
NET "ddr3_dq[14]" LOC = "Y2" ;
NET "ddr3_dq[15]" LOC = "Y1" ;
NET "ddr3_dq[1]" LOC = "R1" ;
NET "ddr3_dq[2]" LOC = "P2" ;
NET "ddr3_dq[3]" LOC = "P1" ;
NET "ddr3_dq[4]" LOC = "L3" ;
NET "ddr3_dq[5]" LOC = "L1" ;
NET "ddr3_dq[6]" LOC = "M2" ;
NET "ddr3_dq[7]" LOC = "M1" ;
NET "ddr3_dq[8]" LOC = "T2" ;
NET "ddr3_dq[9]" LOC = "T1" ;
NET "ddr3_dqs_p[0]" LOC = "N3" ;
NET "ddr3_dqs_n[0]" LOC = "N1" ;
NET "ddr3_odt" LOC = "L6" ;
NET "ddr3_ras_n" LOC = "M5" ;
NET "ddr3_reset_n" LOC = "E3" ;
NET "ddr3_dm[1]" LOC = "P3" ;
NET "ddr3_dqs_p[1]" LOC = "V2" ;
NET "ddr3_dqs_n[1]" LOC = "V1" ;
NET "ddr3_we_n" LOC = "H2" ;
# The following pins are available for used as RZQ or ZIO pins#
NET "mcb3_rzq" LOC = "K7" ;
NET "mcb3_zio" LOC = "R7" ;
############################################################################
# Ethernet MII MAC to PHY interface
############################################################################
NET "mtx_clk_pad_i" LOC = "L20" ;
NET "mtxd_pad_o[0]" LOC = "U10" ;
NET "mtxd_pad_o[1]" LOC = "T10" ;
NET "mtxd_pad_o[2]" LOC = "AB8" ;
NET "mtxd_pad_o[3]" LOC = "AA8" ;
NET "mtxen_pad_o" LOC = "T8" ;
NET "mtxerr_pad_o" LOC = "U8" ;
NET "mrx_clk_pad_i" LOC = "P20" ;
NET "mrxd_pad_i[0]" LOC = "P19" ;
NET "mrxd_pad_i[1]" LOC = "Y22" ;
NET "mrxd_pad_i[2]" LOC = "Y21" ;
NET "mrxd_pad_i[3]" LOC = "W22" ;
NET "mrxdv_pad_i" LOC = "T22" ;
NET "mrxerr_pad_i" LOC = "U20" ;
NET "mcoll_pad_i" LOC = "M16" ;
NET "mcrs_pad_i" LOC = "N15" ;
NET "md_pad_io" LOC = "V20" ;
NET "mdc_pad_o" LOC = "R19" ;
NET "phy_reset_n" LOC = "J22" ;
Go to most recent revision | Compare with Previous | Blame | View Log