OpenCores
URL https://opencores.org/ocsvn/cpu8080/cpu8080/trunk

Subversion Repositories cpu8080

[/] [cpu8080/] [trunk/] [project/] [junk] - Rev 33

Compare with Previous | Blame | View Log

0a1
> `timescale 1ns / 1ps
67,84d67
< //  Modifications, commented by 'CNS' below, NOV-12-2006 Chris N. Strahm      //
< //    (1)     Fixed warnings due to bit width truncations, assignment sizes.        //
< //  (2) Changed tristate data bus to din,dout. Better for internal FPGA use.  // 
< //  (3) Removed waitr line, hard assigned to 0.  Not much use in FPGA's.      //
< //  (4) Implemented INTR hardware vectoring.  Orig 8080 external INT vector   //
< //      scheme not useful for FPGAs with other soft core perfs. Added inputs: //
< //      INTR[1] - Vector/Reset to 0008H                                       // 
< //      INTR[2] - Vector/Reset to 0010H                                       // 
< //      INTR[3] - Vector/Reset to 0018H                                       //
< //      INTR[4] - Vector/Reset to 0020H                                       //
< //      INTR[5] - Vector/Reset to 0028H                                       //
< //      INTR[6] - Vector/Reset to 0030H                                       //
< //      INTR[7] - Vector/Reset to 0038H                                       //
< //  Note: Unused intr lines can just be assigned/wired to 0.                  //
< //  Note: inta is still provided as a common ack to any intr.                 //
< //  Note: Program execution origin at 0H should now jump to >= 0040H to begin //
< //        main code to skip over the interrupt vector locations.              //
< //                                                                            //
87,88d69
< `timescale 1ns / 1ps
< 
127a109,113
> `define cpus_call     6'h23 // CALL completion
> `define cpus_ret      6'h24 // RET completion
> `define cpus_movtalua 6'h25 // move to alu a
> `define cpus_movtalub 6'h26 // move to alu b
> `define cpus_indm     6'h27 // inc/dec m
165,191c151,167
< `define mac_readbmtr   14 // read byte and move to register
< `define mac_sta        16 // STA
< `define mac_lda        20 // LDA
< `define mac_shld       25 // SHLD
< `define mac_lhld       30 // LHLD
< `define mac_writedbyte 36 // write double byte
< `define mac_pop        38 // POP
< `define mac_xthl       40 // XTHL
< `define mac_accimm     44 // accumulator immediate
< `define mac_jmp        45 // JMP
< `define mac_call       47 // CALL
< `define mac_in         51 // IN
< `define mac_out        52 // OUT
< `define mac_rst        53 // RST
< 
< //
< // Reset/Int Opcodes  (CNS)
< //
< `define opcode_reset_0 8'b11000111 // reset int vector to 0000H
< `define opcode_reset_1 8'b11001111 // reset int vector to 0008H
< `define opcode_reset_2 8'b11010111 // reset int vector to 0010H
< `define opcode_reset_3 8'b11011111 // reset int vector to 0018H
< `define opcode_reset_4 8'b11100111 // reset int vector to 0020H
< `define opcode_reset_5 8'b11101111 // reset int vector to 0028H
< `define opcode_reset_6 8'b11110111 // reset int vector to 0030H
< `define opcode_reset_7 8'b11111111 // reset int vector to 0038H
< 
---
> `define mac_readbmtr   15 // read byte and move to register
> `define mac_sta        17 // STA
> `define mac_lda        21 // LDA
> `define mac_shld       26 // SHLD
> `define mac_lhld       31 // LHLD
> `define mac_writedbyte 37 // write double byte
> `define mac_pop        39 // POP
> `define mac_xthl       41 // XTHL
> `define mac_accimm     45 // accumulator immediate
> `define mac_jmp        46 // JMP
> `define mac_call       48 // CALL
> `define mac_in         52 // IN
> `define mac_out        53 // OUT
> `define mac_rst        54 // RST
> `define mac_ret        56 // RET
> `define mac_alum       58 // op a,m
> `define mac_indm       60 // inc/dec m
193,195c169,170
< module M8080  (addr,     // Address out
<                dout,     // Data Output bus
<                din,      // Data Input  bus
---
> module cpu8080(addr,     // Address out
>                data,     // Data bus
200,201c175,177
<                intr,     // Interrupt request bus, hard wire vector select [7:1] CNS
<                inta,     // Interrupt acknowledge, common to any intr 
---
>                intr,     // Interrupt request 
>                inta,     // Interrupt request 
>                waitr,    // Wait request
203,205c179
< //               waitr,    // Wait request  CNS
<                clock   // Clock
<                );   // System clock
---
>                clock);   // System clock
208,209c182
<    input  [7:0] din;
<    output [7:0] dout;
---
>    inout  [7:0] data;
214c187
<    input  [7:1] intr; // CNS
---
>    input  intr;
216c189
< //   input  waitr;   CNS
---
>    input  waitr;
218,220c191
<    input  clock; // synthesis clock 
<     
<    wire   waitr = 1'b0;               // no extra wait states, lock low, CNS
---
>    input  clock;
238c209
< //   reg           dataeno;     // Enable output data CNS
---
>    reg           dataeno;     // Enable output data
276,277d246
<    wire                aluzout; // CNS
<    wire                        alusout; // CNS   
281c250,251
<    alu alu(alures, aluopra, aluoprb, alucin, alucout, aluzout, alusout, alupar, aluaxc, alusel);
---
>    alu alu(alures, aluopra, aluoprb, alucin, alucout, aluzout, alusout, alupar,
>            aluaxc, alusel);
288c258
< //      dataeno <= 0; // get off the data bus CNS
---
>       dataeno <= 0; // get off the data bus
302,304c272,273
<          // if any interrupt request is on, enter interrupt cycle, else exit it now
<          if (ei&&(intr[1]||intr[2]||intr[3]||intr[4]||intr[5]||intr[6]||intr[7])) begin       // CNS
< //         if (intr&&ei) begin
---
>          // if interrupt request is on, enter interrupt cycle, else exit it now
>          if (intr&&ei) begin
334,346c303
<                       // CNS: If we have an intr, then force the opcode to rst#
<                       // else read the op code from the data input as usual. 
<                       if (intcyc) begin               // for an int cycle
<                               if (intr[1]) opcode <= `opcode_reset_1; // int vector to 0008H
<                               if (intr[2]) opcode <= `opcode_reset_2; // int vector to 0010H
<                               if (intr[3]) opcode <= `opcode_reset_3; // int vector to 0018H
<                               if (intr[4]) opcode <= `opcode_reset_4; // int vector to 0020H
<                               if (intr[5]) opcode <= `opcode_reset_5; // int vector to 0028H
<                               if (intr[6]) opcode <= `opcode_reset_6; // int vector to 0030H
<                               if (intr[7]) opcode <= `opcode_reset_7; // int vector to 0038H
<                 intcyc <= 0;          // we will kill the intcyc here, don't need it further
<                       end else opcode <= din; // latch/read opcode CNS
< 
---
>             opcode <= data; // latch opcode
348c305
<             inta <= 0;                                // Deactivate interrupt acknowledge
---
>             inta <= 0; // and interrupt acknowledge
371c328
<                      pc <= pc+1'b1; // Next instruction byte  CNS
---
>                      pc <= pc+1'b1; // Next instruction byte
379c336
<                      pc <= pc+1'b1; // Next instruction byte CNS
---
>                      pc <= pc+1'b1; // Next instruction byte
387c344
<                      pc <= pc+1'b1; // Next instruction byte CNS
---
>                      pc <= pc+1'b1; // Next instruction byte
395c352
<                      pc <= pc+1'b1; // Next instruction byte CNS
---
>                      pc <= pc+1'b1; // Next instruction byte
404,409c361,362
<                      if (regfil[`reg_a][3:0] > 9 || auxcar) begin
< 
<                         { carry, regfil[`reg_a] } <= regfil[`reg_a]+ 3'b110;  // CNS 6
<                         auxcar <= ((regfil[`reg_a][3:0]+6 >> 4) & 1'b1) ? 1'b1:1'b0; // cns
< 
<                      end
---
>                      if (regfil[`reg_a][3:0] > 9 || auxcar)
>                         { auxcar, regfil[`reg_a] } <= regfil[`reg_a]+4'b0110;
425c378,384
<                      state <= `cpus_indcb; // go inr/dcr cycleback
---
>                      if (opcode[5:3] == `reg_m) begin
> 
>                         raddrhold <= regfil[`reg_h]<<8|regfil[`reg_l];
>                         statesel <= `mac_indm; // inc/dec m
>                         state <= `cpus_read; // read byte
> 
>                      end else state <= `cpus_indcb; // go inr/dcr cycleback
434c393
<                         waddrhold <= regfil[`reg_d]<<8|regfil[`reg_d];
---
>                         waddrhold <= regfil[`reg_d]<<8|regfil[`reg_e];
447c406
<                         raddrhold <= regfil[`reg_d]<<8|regfil[`reg_d];
---
>                         raddrhold <= regfil[`reg_d]<<8|regfil[`reg_e];
588c547
<                         (((regfil[`reg_b] << 8)+regfil[`reg_c]) - 8'b1)>>8;
---
>                         (((regfil[`reg_b] << 8)+regfil[`reg_c])-1)>>8;
590c549
<                         ((regfil[`reg_b] << 8)+regfil[`reg_c])- 8'b1;
---
>                         ((regfil[`reg_b] << 8)+regfil[`reg_c])-1;
600c559
<                         (((regfil[`reg_d] << 8)+regfil[`reg_e]) - 8'b1)>>8;
---
>                         (((regfil[`reg_d] << 8)+regfil[`reg_e])-1)>>8;
602c561
<                         ((regfil[`reg_d] << 8)+regfil[`reg_e])- 8'd11;        // cns 11
---
>                         ((regfil[`reg_d] << 8)+regfil[`reg_e])-1;
612c571
<                         (((regfil[`reg_h] << 8)+regfil[`reg_l])- 8'b1)>>8;
---
>                         (((regfil[`reg_h] << 8)+regfil[`reg_l])-1)>>8;
614c573
<                         ((regfil[`reg_h] << 8)+regfil[`reg_l]) - 8'b1;
---
>                         ((regfil[`reg_h] << 8)+regfil[`reg_l])-1;
623c582
<                      sp <= sp - 16'b1;
---
>                      sp <= sp-1;
631c590
<                      raddrhold <= pc+1'b1; // pick up after instruction
---
>                      raddrhold <= pc+1; // pick up after instruction
640c599
<                      raddrhold <= pc+1'b1; // pick up after instruction
---
>                      raddrhold <= pc+1; // pick up after instruction
649c608
<                      raddrhold <= pc+1'b1; // pick up after instruction
---
>                      raddrhold <= pc+1; // pick up after instruction
658,659c617
<                      raddrhold <= pc+1'b1; // pick up after instruction
<                      pc <= pc + 16'h3; // skip
---
>                      raddrhold <= pc+1; // pick up after instruction
671c629
<                      raddrhold <= pc+1'b1; // set pickup address
---
>                      raddrhold <= pc+1; // set pickup address
689c647
<                      raddrhold <= pc+1'b1; // set read address
---
>                      raddrhold <= pc+1; // set read address
698c656
<                      raddrhold <= pc+1'b1; // set read address
---
>                      raddrhold <= pc+1; // set read address
710c668
<                      raddrhold <= pc+1'b1; // set read address
---
>                      raddrhold <= pc+1; // set read address
713c671
<                      pc <= pc + 16'h3; // next
---
>                      pc <= pc + 16'h3; // skip
719c677
<                      raddrhold <= pc+1'b1; // set read address
---
>                      raddrhold <= pc+1; // set read address
722c680
<                      pc <= pc + 16'h3; // next
---
>                      pc <= pc + 16'h3; // skip
760c718
<                   end else if (regd == `reg_m) begin
---
>                   end else if (opcode[5:3] == `reg_m) begin
792,794c750,751
<                   regd <= `reg_a; // set destination always a
<                   statesel <= `mac_readbtoreg; // read byte to register
<                   state <= `cpus_read;
---
>                   statesel <= `mac_alum; // alu from m
>                   state <= `cpus_read; // read byte
808,809c765,766
<                      waddrhold <= sp - 16'h2; // write to stack
<                      sp <= sp - 16'h2; // pushdown stack
---
>                      waddrhold <= sp-2; // write to stack
>                      sp <= sp-2; // pushdown stack
833c790
<                      sp <= sp + 16'h2; // pushup stack
---
>                      sp <= sp+2; // pushup stack
878c835
<                      raddrhold <= pc + 1'b1; // read at PC
---
>                      raddrhold <= pc+1; // read at PC
894c851
<                      raddrhold <= pc+1'b1; // pick up jump address
---
>                      raddrhold <= pc+1; // pick up jump address
938d894
<                      sp <= sp - 16'h2; // pushdown stack
949,950c905,906
<                      { wdatahold2, wdatahold } <= pc + 16'h3; // of address after call
<                      sp <= sp - 16'h2; // pushdown stack
---
>                      // of address after call
>                      { wdatahold2, wdatahold } <= pc + 16'h3;
980,981c936
<                      sp <= sp + 16'h2; // pushup stack
<                      statesel <= `mac_jmp; // finish JMP
---
>                      statesel <= `mac_ret; // finish RET
990,991c945
<                      sp <= sp + 16'h2; // pushup stack
<                      statesel <= `mac_jmp; // finish JMP
---
>                      statesel <= `mac_ret; // finish JMP
1025,1026c979,980
<                      else { wdatahold2, wdatahold } <= pc + 16'h3; // cns 
<                      { wdatahold2, wdatahold } <= pc + 1'b1; // of address after call CNS
---
>                      else { wdatahold2, wdatahold } <= pc + 16'h3;
>                      { wdatahold2, wdatahold } <= pc + 1'b1; // of address after call
1051,1052c1005,1006
<                      raddrhold <= pc+1'b1; // pick up byte I/O address
<                      pc <= pc + 2'b10; // next
---
>                      raddrhold <= pc+1; // pick up byte I/O address
>                      pc <= pc+2; // next
1055c1009
<                      pc <= pc + 2'b10; // Next instruction byte
---
>                      pc <= pc + 16'h2; // advance over byte
1061,1062c1015,1016
<                      raddrhold <= pc+1'b1; // pick up byte I/O address
<                      pc <= pc + 2'b10; // next
---
>                      raddrhold <= pc+1; // pick up byte I/O address
>                      pc <= pc+2; // next
1065c1019
<                      pc <= pc + 2'b10; // Next instruction byte
---
>                      pc <= pc + 16'h2; // advance over byte
1075c1029
<                      pc <= pc + 2'b10; // Next instruction byte, cns 2
---
>                      pc <= pc+1'b1; // Next instruction byte
1097c1051
<          waddrhold <= waddrhold + 1'b1; // next address
---
>          waddrhold <= waddrhold+1; // next address
1100c1054
< //         dataeno <= 1; // enable output data CNS
---
>          dataeno <= 1; // enable output data
1125c1079
< //         dataeno <= 0; // disable output data CNS
---
>          dataeno <= 0; // disable output data
1127c1081
<          statesel <= statesel+1'b1; // and index next in macro 
---
>          statesel <= statesel+1; // and index next in macro 
1138c1092
<          raddrhold <= raddrhold + 1'b1; // next address
---
>          raddrhold <= raddrhold+1; // next address
1157c1111
<             rdatahold <= din; // read new data CNS
---
>             rdatahold <= data; // read new data
1161c1115
<             statesel <= statesel+1'b1; // and index next in macro 
---
>             statesel <= statesel+1; // and index next in macro 
1180,1184c1134,1138
<                sign   <= ((rdatahold2 >> 7)& 1'b1) ? 1'b1:1'b0;
<                zero   <= ((rdatahold2 >> 6)& 1'b1) ? 1'b1:1'b0;
<                auxcar <= ((rdatahold2 >> 4)& 1'b1) ? 1'b1:1'b0;
<                parity <= ((rdatahold2 >> 2)& 1'b1) ? 1'b1:1'b0;
<                carry  <= ((rdatahold2 >> 1)& 1'b1) ? 1'b1:1'b0;
---
>                sign <= rdatahold2 >> 7&1;
>                zero <= rdatahold2 >> 6&1;
>                auxcar <= rdatahold2 >> 4&1;
>                parity <= rdatahold2 >> 2&1;
>                carry <= rdatahold2 >> 0&1;
1199a1154,1169
>       `cpus_call: begin // call address
> 
>          sp <= sp-2; // pushdown stack
>          state <= `cpus_fetchi; // and return to instruction fetch
>          pc <= { rdatahold, rdatahold2 };
> 
>       end
> 
>       `cpus_ret: begin // return from call
> 
>          sp <= sp+2; // pushup stack
>          state <= `cpus_fetchi; // and return to instruction fetch
>          pc <= { rdatahold, rdatahold2 };
> 
>       end
> 
1219c1189
<             regfil[`reg_a] <= din; // place input data CNS
---
>             regfil[`reg_a] <= data; // place input data
1231c1201
< //         dataeno <= 1; // enable output data CNS
---
>          dataeno <= 1; // enable output data
1256c1226
< //         dataeno <= 0; // disable output data CNS
---
>          dataeno <= 0; // disable output data
1265,1266c1235
<          if (ei&&(intr[1]||intr[2]||intr[3]||intr[4]||intr[5]||intr[6]||intr[7])) state <= `cpus_fetchi; // Fetch next instruction    // CNS
< //         if (intr&&ei) state <= `cpus_fetchi; // Fetch next instruction
---
>          if (intr&&ei) state <= `cpus_fetchi; // Fetch next instruction
1269d1237
< 
1276c1244,1260
<          statesel <= statesel+1'b1; // and index next in macro 
---
>          statesel <= statesel+1; // and index next in macro 
> 
>       end
> 
>       `cpus_movtalua: begin // move to alu a
> 
>          aluopra <= rdatahold; // place data
>          state <= nextstate; // get next macro state
>          statesel <= statesel+1; // and index next in macro 
> 
>       end
> 
>       `cpus_movtalub: begin // move to alu b
> 
>          aluoprb <= rdatahold; // place data
>          state <= nextstate; // get next macro state
>          statesel <= statesel+1; // and index next in macro 
1302a1287,1299
>       `cpus_indm: begin // inr/dcr cycleback to m
> 
>          waddrhold <= regfil[`reg_h]<<8|regfil[`reg_l]; // place address
>          wdatahold <= alures; // place data to write
>          sign <= alures[7]; // place sign
>          zero <= aluzout; // place zero
>          parity <= alupar; // place parity
>          auxcar <= aluaxc; // place auxiliary carry
>          state <= nextstate; // get next macro state
>          statesel <= statesel+1; // and index next in macro 
> 
>       end
> 
1338c1335
<          statesel <= statesel+1'b1; // and index next in macro cns
---
>          statesel <= statesel+1; // and index next in macro 
1346c1343
<          statesel <= statesel+1'b1; // and index next in macro cns
---
>          statesel <= statesel+1; // and index next in macro 
1354c1351
<          statesel <= statesel+1'b1; // and index next in macro cns
---
>          statesel <= statesel+1; // and index next in macro 
1363c1360
<          statesel <= statesel+1'b1; // and index next in macro CNS
---
>          statesel <= statesel+1; // and index next in macro 
1376,1377c1373
<          if (regfil[`reg_a][7:4] > 9 || carry) begin
< 
---
>          if (regfil[`reg_a][7:4] > 9 || carry)
1379,1380d1374
< 
<          end
1390c1384
<    assign dout = datao; // CNS
---
>    assign data = dataeno ? datao: 8'bz;
1433c1427,1428
<       13: nextstate = `cpus_fetchi; // Fetch next instruction
---
>       13: nextstate = `cpus_write; // write to destination
>       14: nextstate = `cpus_fetchi; // Fetch next instruction
1437,1438c1432,1433
<       14: nextstate = `cpus_movtr; // place in register
<       15: nextstate = `cpus_fetchi; // Fetch next instruction
---
>       15: nextstate = `cpus_movtr; // place in register
>       16: nextstate = `cpus_fetchi; // Fetch next instruction
1442,1445c1437,1440
<       16: nextstate = `cpus_read; // read high byte
<       17: nextstate = `cpus_movrtwa; // move read to write address
<       18: nextstate = `cpus_write; // write to destination
<       19: nextstate = `cpus_fetchi; // Fetch next instruction
---
>       17: nextstate = `cpus_read; // read high byte
>       18: nextstate = `cpus_movrtwa; // move read to write address
>       19: nextstate = `cpus_write; // write to destination
>       20: nextstate = `cpus_fetchi; // Fetch next instruction
1449,1453c1444,1448
<       20: nextstate = `cpus_read; // read high byte
<       21: nextstate = `cpus_movrtra; // move read to write address
<       22: nextstate = `cpus_read; // read byte
<       23: nextstate = `cpus_movtr; // move to register
<       24: nextstate = `cpus_fetchi; // Fetch next instruction
---
>       21: nextstate = `cpus_read; // read high byte
>       22: nextstate = `cpus_movrtra; // move read to write address
>       23: nextstate = `cpus_read; // read byte
>       24: nextstate = `cpus_movtr; // move to register
>       25: nextstate = `cpus_fetchi; // Fetch next instruction
1457,1461c1452,1456
<       25: nextstate = `cpus_read; // read high byte
<       26: nextstate = `cpus_movrtwa; // move read to write address
<       27: nextstate = `cpus_write; // write to destination low
<       28: nextstate = `cpus_write; // write to destination high
<       29: nextstate = `cpus_fetchi; // Fetch next instruction
---
>       26: nextstate = `cpus_read; // read high byte
>       27: nextstate = `cpus_movrtwa; // move read to write address
>       28: nextstate = `cpus_write; // write to destination low
>       29: nextstate = `cpus_write; // write to destination high
>       30: nextstate = `cpus_fetchi; // Fetch next instruction
1465,1470c1460,1465
<       30: nextstate = `cpus_read; // read high byte
<       31: nextstate = `cpus_movrtra; // move read to write address
<       32: nextstate = `cpus_read; // read byte low
<       33: nextstate = `cpus_read; // read byte high
<       34: nextstate = `cpus_lhld; // move to register
<       35: nextstate = `cpus_fetchi; // Fetch next instruction
---
>       31: nextstate = `cpus_read; // read high byte
>       32: nextstate = `cpus_movrtra; // move read to write address
>       33: nextstate = `cpus_read; // read byte low
>       34: nextstate = `cpus_read; // read byte high
>       35: nextstate = `cpus_lhld; // move to register
>       36: nextstate = `cpus_fetchi; // Fetch next instruction
1474,1475c1469,1470
<       36: nextstate = `cpus_write; // double write
<       37: nextstate = `cpus_fetchi; // then fetch
---
>       37: nextstate = `cpus_write; // double write
>       38: nextstate = `cpus_fetchi; // then fetch
1479,1480c1474,1475
<       38: nextstate = `cpus_read; // double it
<       39: nextstate = `cpus_pop; // then finish
---
>       39: nextstate = `cpus_read; // double it
>       40: nextstate = `cpus_pop; // then finish
1484,1487c1479,1482
<       40: nextstate = `cpus_read; // double it
<       41: nextstate = `cpus_write; // then write
<       42: nextstate = `cpus_write; // double it
<       43: nextstate = `cpus_movmthl; // place word in hl
---
>       41: nextstate = `cpus_read; // double it
>       42: nextstate = `cpus_write; // then write
>       43: nextstate = `cpus_write; // double it
>       44: nextstate = `cpus_movmthl; // place word in hl
1491c1486
<       44: nextstate = `cpus_accimm; // finish
---
>       45: nextstate = `cpus_accimm; // finish
1495,1496c1490,1491
<       45: nextstate = `cpus_read; // double read
<       46: nextstate = `cpus_jmp; // then go pc
---
>       46: nextstate = `cpus_read; // double read
>       47: nextstate = `cpus_jmp; // then go pc
1500,1503c1495,1498
<       47: nextstate = `cpus_read; // double read
<       48: nextstate = `cpus_write; // then write
<       49: nextstate = `cpus_write; // double write
<       50: nextstate = `cpus_jmp; // then go to that
---
>       48: nextstate = `cpus_read; // double read
>       49: nextstate = `cpus_write; // then write
>       50: nextstate = `cpus_write; // double write
>       51: nextstate = `cpus_call; // then go to that
1507c1502
<       51: nextstate = `cpus_in; // go to IN after getting that
---
>       52: nextstate = `cpus_in; // go to IN after getting that
1511c1506
<       52: nextstate = `cpus_out; // go to OUT after getting that
---
>       53: nextstate = `cpus_out; // go to OUT after getting that
1515,1516c1510,1528
<       53: nextstate = `cpus_write; // double write
<       54: nextstate = `cpus_jmp; // then go to that
---
>       54: nextstate = `cpus_write; // double write
>       55: nextstate = `cpus_jmp; // then go to that
> 
>       // mac_ret: RET
> 
>       56: nextstate = `cpus_read; // double read
>       57: nextstate = `cpus_ret; // then go to that
> 
>       // mac_alum: op a,m
> 
>       58: nextstate = `cpus_movtalub; // go move to alu a
>       59: nextstate = `cpus_alucb; // cycle back to acc
> 
>       // mac_idm: inc/dec m
> 
>       60: nextstate = `cpus_movtalua; // go move to alu b
>       61: nextstate = `cpus_indm; // set up alu result
>       62: nextstate = `cpus_write; // write it
>       63: nextstate = `cpus_fetchi; // Fetch next instruction
1560,1563c1572
< //            auxcar = ((opra[3:0]+oprb[3:0]) >> 4) & 1'b1; // find auxiliary carry
< //                    if ((opra[3:0]+oprb[3:0])>>4) auxcar=1'b1; else auxcar=1'b0;
<             auxcar = (((opra[3:0]+oprb[3:0]) >> 4) & 1'b1) ? 1'b1 : 1'b0 ; // find auxiliary carry
< 
---
>             auxcar = (opra[3:0]+oprb[3:0]) >> 4 & 1; // find auxiliary carry
1569c1578
<             auxcar = (((opra[3:0]+oprb[3:0]+cin) >> 4) & 1'b1) ? 1'b1 : 1'b0; // find auxiliary carry
---
>             auxcar = (opra[3:0]+oprb[3:0]+cin) >> 4 & 1; // find auxiliary carry
1575c1584
<             auxcar = (((opra[3:0]-oprb[3:0]) >> 4) & 1'b1) ? 1'b1 : 1'b0; // find auxiliary borrow
---
>             auxcar = (opra[3:0]-oprb[3:0]) >> 4 & 1; // find auxiliary borrow
1581c1590
<             auxcar = (((opra[3:0]-oprb[3:0]-cin >> 4)) & 1'b1) ? 1'b1 : 1'b0; // find auxiliary borrow 
---
>             auxcar = (opra[3:0]-oprb[3:0]-cin >> 4) & 1; // find auxiliary borrow
1587c1596
<             auxcar = 1'b0; // clear auxillary carry
---
>             auxcar = 0; // clear auxillary carry
1593c1602
<             auxcar = 1'b0; // clear auxillary carry
---
>             auxcar = 0; // clear auxillary carry
1599c1608
<             auxcar = 1'b0; // clear auxillary carry
---
>             auxcar = 0; // clear auxillary carry

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.