OpenCores
URL https://opencores.org/ocsvn/eco32/eco32/trunk

Subversion Repositories eco32

[/] [eco32/] [trunk/] [tools/] [bin2exo/] [srecord.html] - Rev 194

Go to most recent revision | Compare with Previous | Blame | View Log

<!DOCTYPE doctype PUBLIC "-//IETF//DTD HTML//EN">
<html><head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
  <meta name="GENERATOR" content="Internet Assistant for Word 1.0Z">
  <meta name="SUBJECT" content="EE/CS 373">
  <meta name="AUTHOR" content="Val Tareski"><title>Motorola S-record description</title></head><body>
<h1>
  <a name="top">Motorola S-records</a>
</h1>
 
The following fairly complete description of Motorola S-records was found
a number of years ago on the man pages of a UNIX system. 
 
<hr>
 
NAME
<blockquote>
  srec - S-record file and record format
</blockquote>
<p>
DESCRIPTION
</p><blockquote>
  An S-record file consists of a sequence of specially formatted ASCII character
  strings. An S-record will be less than or equal to 78 bytes in length.
  <p>
  The order of S-records within a file is of no significance and no particular
  order may be assumed.
  </p><p>
  The general format of an S-record follows:
</p></blockquote>
<pre><tt>+-------------------//------------------//-----------------------+
| type | count | address  |            data           | checksum |
+-------------------//------------------//-----------------------+</tt>
</pre>
<blockquote>
  type -- A char[2] field. These characters describe the type of record (S0,
  S1, S2, S3, S5, S7, S8, or S9).
  <p>
  count -- A char[2] field. These characters when paired and interpreted as
  a hexadecimal value, display the count of remaining character pairs in the
  record.
  </p><p>
  address -- A char[4,6, or 8] field. These characters grouped and interpreted
  as a hexadecimal value, display the address at which the data field is to
  be loaded into memory. The length of the field depends on the number of bytes
  necessary to hold the address. A 2-byte address uses 4 characters, a 3-byte
  address uses 6 characters, and a 4-byte address uses 8 characters.
  </p><p>
  data -- A char [0-64] field. These characters when paired and interpreted
  as hexadecimal values represent the memory loadable data or descriptive
  information.
  </p><p>
  checksum -- A char[2] field. These characters when paired and interpreted
  as a hexadecimal value display the least significant byte of the ones complement
  of the sum of the byte values represented by the pairs of characters making
  up the count, the address, and the data fields.
  </p><p>
  Each record is terminated with a line feed. If any additional or different
  record terminator(s) or delay characters are needed during transmission to
  the target system it is the responsibility of the transmitting program to
  provide them.
  </p><p>
  S0 Record. The type of record is 'S0' (0x5330). The address field is unused
  and will be filled with zeros (0x0000). The header information within the
  data field is divided into the following subfields.
  </p><p>
</p><blockquote>
<blockquote>
  mname is char[20] and is the module name.<br>
  ver is char[2] and is the version number.<br>
  rev is char[2] and is the revision number.<br>
  description is char[0-36] and is a text comment.
  <p>
</p></blockquote>
  Each of the subfields is composed of ASCII bytes whose associated characters,
  when paired, represent one byte hexadecimal values in the case of the version
  and revision numbers, or represent the hexadecimal values of the ASCII characters
  comprising the module name and description.
</blockquote>
<p>
  S1 Record. The type of record field is 'S1' (0x5331). The address field is
  intrepreted as a 2-byte address. The data field is composed of memory loadable
  data.
  </p><p>
  S2 Record. The type of record field is 'S2' (0x5332). The address field is
  intrepreted as a 3-byte address. The data field is composed of memory loadable
  data.
  </p><p>
  S3 Record. The type of record field is 'S3' (0x5333). The address field is
  intrepreted as a 4-byte address. The data field is composed of memory loadable
  data.
  </p><p>
  S5 Record. The type of record field is 'S5' (0x5335). The address field is
  intrepreted as a 2-byte value and contains the count of S1, S2, and S3 records
  previously transmitted. There is no data field.
  </p><p>
  S7 Record. The type of record field is 'S7' (0x5337). The address field contains
  the starting execution address and is intrepreted as 4-byte address. There
  is no data field.
  </p><p>
  S8 Record. The type of record field is 'S8' (0x5338). The address field contains
  the starting execution address and is intrepreted as 3-byte address. There
  is no data field.
  </p><p>
  S9 Record. The type of record field is 'S9' (0x5339). The address field contains
  the starting execution address and is intrepreted as 2-byte address. There
  is no data field.
</p></blockquote>
<p>
EXAMPLE
</p><blockquote>
  Shown below is a typical S-record format file.
  <p>
 
</p><blockquote>
  <tt>S00600004844521B<br>
  S1130000285F245F2212226A000424290008237C2A<br>
  S11300100002000800082629001853812341001813<br>
  S113002041E900084E42234300182342000824A952<br>
  S107003000144ED492<br>
  S5030004F8<br>
  S9030000FC</tt>
</blockquote>
  <p>
  The file consists of one S0 record, four S1 records, one S5 record and an
  S9 record.
  </p><p>
  The S0 record is comprised as follows:
</p><ul>
  <li>S0 S-record type S0, indicating it is a header record.
  </li><li>06 Hexadecimal 06 (decimal 6), indicating that six character pairs (or ASCII
  bytes) follow.
  </li><li>00 00 Four character 2-byte address field, zeroes in this example.<br>
  </li><li>48 44 52 ASCII H, D, and R - "HDR".
  </li><li>1B The checksum.
 
</li></ul>
  The first S1 record is comprised as follows:
<ul>
  <li>S1 S-record type S1, indicating it is a data record to be loaded at a 2-byte
  address.
  </li><li>13 Hexadecimal 13 (decimal 19), indicating that nineteen character pairs,
  representing a 2 byte address, 16 bytes of binary data, and a 1 byte checksum,
  follow.
  </li><li>00 00 Four character 2-byte address field; hexidecimal address 0x0000, where
  the data which follows is to be loaded.
  </li><li>28 5F 24 5F 22 12 22 6A 00 04 24 29 00 08 23 7C Sixteen character pairs
  representing the actual binary data.
  </li><li>2A The checksum.
</li></ul>
  <p>
  The second and third S1 records each contain 0x13 (19) character pairs and
  are ended with checksums of 13 and 52, respectively. The fourth S1 record
  contains 07 character pairs and has a checksum of 92.
</p><p>
  The S5 record is comprised as follows:
</p><ul>
  <li>S5 S-record type S5, indicating it is a count record indicating the number
  of S1 records
  </li><li>03 Hexadecimal 03 (decimal 3), indicating that three character pairs
  follow.
  </li><li>00 04 Hexadecimal 0004 (decimal 4), indicating that there are four data records
  previous to this record.
  </li><li>F8 The checksum.
</li></ul>
<p>
  The S9 record is comprised as follows:
</p><ul>
  <li>S9 S-record type S9, indicating it is a termination record.
  </li><li>03 Hexadecimal 03 (decimal 3), indicating that three character pairs
  follow.
  </li><li>00 00 The address field, hexadecimal 0 (decimal 0) indicating the starting
  execution address.
  </li><li>FC The checksum. 
</li></ul>
</blockquote>
<p>
  </p><hr>
<h2>
  Instructor Notes
</h2>
<ul>
  <li>
    There isn't any evidence that Motorola ever has made use of the header
    information within the data field of the S0 record, as described above. This
    must have been used by some third party vendors.
  </li><li>
    This is the only place that a 78-byte limit on total record length or 64-byte
    limit on data length is documented. These values shouldn't be trusted for
    the general case.
  </li><li>
    The count field can have values in the range of 0x3 (2 bytes of address +
    1 byte checksum = 3, a not very useful record) to 0xff; this is the count
    of remaining character <big><b>pairs</b></big>, including checksum.
  </li><li>
    If you write code to convert S-Records, you should always assume that a record
    can be as long as 514 (decimal) characters in length (255 * 2 = 510, plus
    4 characters for the type and count fields), plus any terminating character(s).
    That is, in establishing an input buffer in C, you would declare it to be
    an array of 515 chars, thus leaving room for the terminating null character.
</li></ul>
<p>
  </p><hr>
<a href="#top">Beginning of document</a><br>
</body></html>

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.