OpenCores
URL https://opencores.org/ocsvn/esoc/esoc/trunk

Subversion Repositories esoc

[/] [esoc/] [trunk/] [Sources/] [logixa/] [esoc_bus_arbiter.vhd] - Rev 46

Go to most recent revision | Compare with Previous | Blame | View Log

--------------------------------------------------------------------------------
----                                                                        ----
---- Ethernet Switch on Configurable Logic IP Core                          ----
----                                                                        ----
---- This file is part of the ESoCL project                                 ----
---- http://www.opencores.org/cores/esoc/                                   ----
----                                                                        ----
---- Description: see design description ESoCL_dd_71022001.pdf              ----
----                                                                        ----
---- To Do: see roadmap description ESoCL_dd_71022001.pdf                   ----
----        and/or release bulleting ESoCL_rb_71022001.pdf                  ----
----                                                                        ----
---- Author(s): L.Maarsen                                                   ----
---- Bert Maarsen, lmaarsen@opencores.org                                   ----
----                                                                        ----
--------------------------------------------------------------------------------
----                                                                        ----
---- Copyright (C) 2009 Authors and OPENCORES.ORG                           ----
----                                                                        ----
---- This source file may be used and distributed without                   ----
---- restriction provided that this copyright statement is not              ----
---- removed from the file and that any derivative work contains            ----
---- the original copyright notice and the associated disclaimer.           ----
----                                                                        ----
---- This source file is free software; you can redistribute it             ----
---- and/or modify it under the terms of the GNU Lesser General             ----
---- Public License as published by the Free Software Foundation;           ----
---- either version 2.1 of the License, or (at your option) any             ----
---- later version.                                                         ----
----                                                                        ----
---- This source is distributed in the hope that it will be                 ----
---- useful, but WITHOUT ANY WARRANTY; without even the implied             ----
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR                ----
---- PURPOSE. See the GNU Lesser General Public License for more            ----
---- details.                                                               ----
----                                                                        ----
---- You should have received a copy of the GNU Lesser General              ----
---- Public License along with this source; if not, download it             ----
---- from http://www.opencores.org/lgpl.shtml                               ----
----                                                                        ----
--------------------------------------------------------------------------------
-- Object        : Entity work.esoc_bus_arbiter
-- Last modified : Mon Apr 14 12:48:27 2014.
--------------------------------------------------------------------------------
 
 
 
library ieee, std, work;
use ieee.std_logic_1164.all;
use std.textio.all;
use ieee.numeric_std.all;
use work.package_esoc_configuration.all;
 
entity esoc_bus_arbiter is
  generic(
    id : integer := 0);
  port(
    bus_eof      : in     std_logic;
    bus_gnt_rd   : out    std_logic_vector(esoc_port_count-1 downto 0);
    bus_gnt_wr   : out    std_logic_vector(esoc_port_count-1 downto 0);
    bus_req      : in     std_logic_vector(esoc_port_count-1 downto 0);
    bus_sof      : in     std_logic;
    clk_bus      : in     std_logic;
    clk_control  : in     std_logic;
    ctrl_address : in     std_logic_vector(15 downto 0);
    ctrl_rd      : in     std_logic;
    ctrl_rddata  : out    std_logic_vector(31 downto 0);
    ctrl_wait    : out    std_logic;
    ctrl_wr      : in     std_logic;
    ctrl_wrdata  : in     std_logic_vector(31 downto 0);
    reset        : in     std_logic);
end entity esoc_bus_arbiter;
 
--------------------------------------------------------------------------------
-- Object        : Architecture work.esoc_bus_arbiter.esoc_bus_arbiter
-- Last modified : Mon Apr 14 12:48:27 2014.
--------------------------------------------------------------------------------
 
 
---------------------------------------------------------------------------------------------------------------
-- architecture and declarations
---------------------------------------------------------------------------------------------------------------
architecture esoc_bus_arbiter of esoc_bus_arbiter is
 
---------------------------------------------------------------------------------------------------------------
-- registers
---------------------------------------------------------------------------------------------------------------
constant reg_arb_port_disable_add: integer                        := 7;
signal   reg_arb_port_disable_dat: std_logic_vector(31 downto 0);
constant reg_arb_port_disable_rst: std_logic_vector(31 downto 0)  := X"00000000";
 
constant reg_arb_port_weight_add: integer                         := 0;
signal   reg_arb_port_weight_dat: std_logic_vector(31 downto 0);
constant reg_arb_port_weight_rst: std_logic_vector(31 downto 0)   := X"00000000";
---------------------------------------------------------------------------------------------------------------
-- signals
---------------------------------------------------------------------------------------------------------------
signal port_select: integer range esoc_port_count-1 downto 0;
signal port_request: std_logic;
signal port_request_weight: std_logic_vector(1 downto 0);
 
type states_data_bus is (idle, wait_sof, wait_eof);
signal state_data_bus: states_data_bus;
 
signal ctrl_rddata_i: std_logic_vector(ctrl_rddata'high downto 0);
signal ctrl_wait_i: std_logic;
signal ctrl_bus_enable: std_logic;
 
begin
 
--=============================================================================================================
-- Process		  : process data bus access request, use weight factor for each port and approve access
-- Description	: 
--=============================================================================================================    
req_scan: process(clk_bus, reset)
          begin
            if reset = '1' then
              port_select <= 0;
              port_request <= '0';
              port_request_weight <= (others => '0');
              bus_gnt_wr <= (others => '0');
              bus_gnt_rd <= (others => '0');
              state_data_bus <= idle;
 
            elsif clk_bus'event and clk_bus = '1' then
              -- scan request outputs from all ESOC ports, if asserted wait for free data bus
              if bus_req(port_select) = '1' and reg_arb_port_disable_dat(port_select) = '0' then
                port_request <= '1';
 
              -- request output deasserted, current weight factor zero? determine next port to check, use weight factor of current port
              else
                port_request <= '0';
 
                -- check weight of processed port, scan port again or go to next port with appropriate weight?
                if to_integer(unsigned(port_request_weight)) = 0 then
                  if port_select = esoc_port_count-1 then
                    port_select <= 0;
                    port_request_weight <= reg_arb_port_weight_dat(1) & reg_arb_port_weight_dat(0);
                  else
                    port_select <= port_select + 1;
                    port_request_weight <= reg_arb_port_weight_dat(2*(port_select+1)+1) & reg_arb_port_weight_dat(2*(port_select+1));
                  end if;
 
                -- weight not 0, do not proceed with next port, but decrease weight of actual port
                else
                  port_request_weight <= std_logic_vector(to_unsigned(to_integer(unsigned(port_request_weight))-1,2));
                end if;
              end if;   
 
              -- monitor the data bus state and control the scan process
              case state_data_bus is
                when idle =>      -- if there is a bus request, give a write grant to selected port, a read grant to all other ports and wait for SOF and EOF
                                  if port_request = '1' then
                                    bus_gnt_wr(port_select) <= '1';
                                    bus_gnt_rd <= (others => '1');
                                    state_data_bus <= wait_sof;
                                  end if;
 
                when wait_sof =>  -- wait for start of packet, no further actions required yet (future)
                                  if bus_sof = '1' then
                                   state_data_bus <= wait_eof;
                                  end if;
 
                 when wait_eof => -- End of packet detect? Terminate and go back to idle.
                                  if bus_eof = '1' then
                                    bus_gnt_wr <= (others => '0');
                                    bus_gnt_rd <= (others => '0');
                                    state_data_bus <= idle;
                                  end if;
 
                 when others =>   state_data_bus <= idle;
               end case;
            end if;
          end process;
 
--=============================================================================================================
-- Process		  : access registers when addressed or provide data from other units to the readdata bus
-- Description	: 
--=============================================================================================================    
registers:  process(clk_control, reset)
            begin
              if reset = '1' then
                -- all ports have weight 1 after reset
                reg_arb_port_disable_dat  <= reg_arb_port_disable_rst;
                reg_arb_port_weight_dat   <= reg_arb_port_weight_rst;
                ctrl_rddata_i             <= (others => '0');
                ctrl_wait_i               <= '1';
                ctrl_bus_enable           <= '0';
 
              elsif clk_control'event and clk_control = '1' then
                ctrl_wait_i   <= '1';
                ctrl_bus_enable <= '0';
 
                -- continu if memory space of this entity is addressed
                if to_integer(unsigned(ctrl_address)) >= (esoc_bus_arbiter_base + (id * esoc_bus_arbiter_size)) and to_integer(unsigned(ctrl_address)) < (esoc_bus_arbiter_base + (id * esoc_bus_arbiter_size) + esoc_bus_arbiter_size) then
                  ctrl_bus_enable <= '1';
 
	                --
	                -- READ CYCLE started, unit addressed?
	                --
	                if ctrl_rd = '1' then
	                	-- Check register address and provide data when addressed
	                  case to_integer(unsigned(ctrl_address))- esoc_bus_arbiter_base - (id * esoc_bus_arbiter_size) is
                      when reg_arb_port_disable_add  =>    ctrl_rddata_i <= reg_arb_port_disable_dat;
                                                           ctrl_wait_i <= '0';
 
                      when reg_arb_port_weight_add   =>    ctrl_rddata_i <= reg_arb_port_weight_dat;
                                                           ctrl_wait_i <= '0';      
 
                      when others                    =>    NULL;
                    end case;                                  
 
                  --
                  -- WRITE CYCLE started, unit addressed?  
                  --
                  elsif ctrl_wr = '1' then
                  	-- Check address and accept data when addressed
                  	case to_integer(unsigned(ctrl_address))- esoc_bus_arbiter_base  - (id * esoc_bus_arbiter_size) is
                      when reg_arb_port_disable_add  =>  reg_arb_port_disable_dat <= ctrl_wrdata;
                                                         ctrl_wait_i <= '0';
 
                      when reg_arb_port_weight_add   =>  reg_arb_port_weight_dat <= ctrl_wrdata;
                                                         ctrl_wait_i <= '0';    
 
                      when others                    =>  NULL;
                    end case;
                  end if;
                end if;
              end if;
            end process;
 
            -- Create tristate outputs
            ctrl_wait   <= ctrl_wait_i    when ctrl_bus_enable = '1' else 'Z';
            ctrl_rddata <= ctrl_rddata_i  when ctrl_bus_enable = '1' else (others => 'Z');
 
end architecture esoc_bus_arbiter ; -- of esoc_bus_arbiter
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.