URL
https://opencores.org/ocsvn/funbase_ip_library/funbase_ip_library/trunk
Subversion Repositories funbase_ip_library
[/] [funbase_ip_library/] [trunk/] [TUT/] [ip.swp.api/] [openmcapi/] [1.0/] [test/] [func/] [fts_mcapi_sclchan_send_close_i.c] - Rev 145
Compare with Previous | Blame | View Log
/* * Copyright (c) 2010, Mentor Graphics Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of the <ORGANIZATION> nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * FILENAME * * fts_main.c * * *************************************************************************/ #include "fts_defs.h" #include "support_suite/mcapid_support.h" extern MCAPI_MUTEX MCAPID_FTS_Mutex; /************************************************************************ * * FUNCTION * * MCAPI_FTS_Tx_2_32_1 * * DESCRIPTION * * Testing mcapi_sclchan_send_close_i - open tx / close tx * * Node 1 – Create endpoint, open send side, close send side * *************************************************************************/ MCAPI_THREAD_ENTRY(MCAPI_FTS_Tx_2_32_1) { MCAPID_STRUCT *mcapi_struct = (MCAPID_STRUCT*)argv; size_t rx_len; mcapi_request_t request; /* Don't let any other test run while this test is running. */ MCAPI_Obtain_Mutex(&MCAPID_FTS_Mutex); /* Open the local endpoint as the sender. */ mcapi_open_sclchan_send_i(&mcapi_struct->scl_tx_handle, mcapi_struct->local_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MGC_MCAPI_ERR_NOT_CONNECTED) { /* Close the send side. */ mcapi_sclchan_send_close_i(mcapi_struct->scl_tx_handle, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to close. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); } else { mcapi_struct->status = -1; } } else { mcapi_struct->status = -1; } /* Set the state of the test to completed. */ mcapi_struct->state = 0; /* Allow the next test to run. */ MCAPI_Release_Mutex(&MCAPID_FTS_Mutex); } /* MCAPI_FTS_Tx_2_32_1 */ /************************************************************************ * * FUNCTION * * MCAPI_FTS_Tx_2_32_2 * * DESCRIPTION * * Testing mcapi_sclchan_send_close_i - close rx side as tx side * * Node 1 – Create endpoint, open receive side, close as send side * *************************************************************************/ MCAPI_THREAD_ENTRY(MCAPI_FTS_Tx_2_32_2) { MCAPID_STRUCT *mcapi_struct = (MCAPID_STRUCT*)argv; mcapi_request_t request; mcapi_status_t status; /* Don't let any other test run while this test is running. */ MCAPI_Obtain_Mutex(&MCAPID_FTS_Mutex); /* Open the local endpoint as the receiver. */ mcapi_open_sclchan_recv_i(&mcapi_struct->scl_rx_handle, mcapi_struct->local_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MGC_MCAPI_ERR_NOT_CONNECTED) { /* Close the receive side as the send side. */ mcapi_sclchan_send_close_i(mcapi_struct->scl_rx_handle, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_ERR_CHAN_DIRECTION) { mcapi_struct->status = MCAPI_SUCCESS; } else { mcapi_struct->status = -1; } /* Cancel the open call. */ mcapi_cancel(&mcapi_struct->request, &status); } else { mcapi_struct->status = -1; } /* Set the state of the test to completed. */ mcapi_struct->state = 0; /* Allow the next test to run. */ MCAPI_Release_Mutex(&MCAPID_FTS_Mutex); } /* MCAPI_FTS_Tx_2_32_2 */ /************************************************************************ * * FUNCTION * * MCAPI_FTS_Tx_2_32_3 * * DESCRIPTION * * Testing mcapi_sclchan_send_close_i - connect / open tx / close * tx * * Node 0 – Create endpoint * * Node 1 – Create endpoint, get endpoint on Node 0, issue * connection, open send side, close send side * *************************************************************************/ MCAPI_THREAD_ENTRY(MCAPI_FTS_Tx_2_32_3) { MCAPID_STRUCT *mcapi_struct = (MCAPID_STRUCT*)argv; size_t rx_len; mcapi_status_t status; mcapi_endpoint_t rx_endp; mcapi_request_t request; /* Don't let any other test run while this test is running. */ MCAPI_Obtain_Mutex(&MCAPID_FTS_Mutex); /* Indicate that a remote endpoint should be created. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CREATE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the endpoint was created. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Get the receive side endpoint. */ rx_endp = mcapi_get_endpoint(FUNC_BACKEND_NODE_ID, 1024, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Connect the two endpoints. */ mcapi_connect_sclchan_i(mcapi_struct->local_endp, rx_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to open. */ mcapi_wait(&mcapi_struct->request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Open the local endpoint as the sender. */ mcapi_open_sclchan_send_i(&mcapi_struct->scl_tx_handle, mcapi_struct->local_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Close the send side. */ mcapi_sclchan_send_close_i(mcapi_struct->scl_tx_handle, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to close. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); } } } } /* Tell the other side to delete the endpoint. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_DELETE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } /* Set the state of the test to completed. */ mcapi_struct->state = 0; /* Allow the next test to run. */ MCAPI_Release_Mutex(&MCAPID_FTS_Mutex); } /* MCAPI_FTS_Tx_2_32_3 */ /************************************************************************ * * FUNCTION * * MCAPI_FTS_Tx_2_32_4 * * DESCRIPTION * * Testing mcapi_sclchan_send_close_i - open tx / connect / close * tx * * Node 0 – Create endpoint * * Node 1 – Create endpoint, get endpoint on Node 0, open * send side, connect, close send side * *************************************************************************/ MCAPI_THREAD_ENTRY(MCAPI_FTS_Tx_2_32_4) { MCAPID_STRUCT *mcapi_struct = (MCAPID_STRUCT*)argv; size_t rx_len; mcapi_status_t status; mcapi_endpoint_t rx_endp; mcapi_request_t request; /* Don't let any other test run while this test is running. */ MCAPI_Obtain_Mutex(&MCAPID_FTS_Mutex); /* Indicate that a remote endpoint should be created. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CREATE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the endpoint was created. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Get the receive side endpoint. */ rx_endp = mcapi_get_endpoint(FUNC_BACKEND_NODE_ID, 1024, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Open the local endpoint as the sender. */ mcapi_open_sclchan_send_i(&mcapi_struct->scl_tx_handle, mcapi_struct->local_endp, &request, &mcapi_struct->status); if (mcapi_struct->status == MGC_MCAPI_ERR_NOT_CONNECTED) { /* Connect the two endpoints. */ mcapi_connect_sclchan_i(mcapi_struct->local_endp, rx_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to open. */ mcapi_wait(&mcapi_struct->request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Close the send side. */ mcapi_sclchan_send_close_i(mcapi_struct->scl_tx_handle, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to close. */ mcapi_wait(&mcapi_struct->request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); } } } } /* Tell the other side to delete the endpoint. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_DELETE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } /* Set the state of the test to completed. */ mcapi_struct->state = 0; /* Allow the next test to run. */ MCAPI_Release_Mutex(&MCAPID_FTS_Mutex); } /* MCAPI_FTS_Tx_2_32_4 */ /************************************************************************ * * FUNCTION * * MCAPI_FTS_Tx_2_32_5 * * DESCRIPTION * * Testing mcapi_sclchan_send_close_i - open tx / connect / open rx * / close tx * * Node 0 – Create endpoint, wait for connection, open receive side * * Node 1 – Create endpoint, open send side, get endpoint on * Node 0, issue connection, wait for rx to open, close * send side * *************************************************************************/ MCAPI_THREAD_ENTRY(MCAPI_FTS_Tx_2_32_5) { MCAPID_STRUCT *mcapi_struct = (MCAPID_STRUCT*)argv; size_t rx_len; mcapi_status_t status; mcapi_endpoint_t tx_endp, rx_endp; mcapi_request_t request; /* Don't let any other test run while this test is running. */ MCAPI_Obtain_Mutex(&MCAPID_FTS_Mutex); /* An additional endpoint is required for this test. */ tx_endp = mcapi_create_endpoint(MCAPI_PORT_ANY, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Indicate that a remote endpoint should be created. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CREATE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the endpoint was created. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Open the local endpoint as the sender. */ mcapi_open_sclchan_send_i(&mcapi_struct->scl_tx_handle, tx_endp, &request, &mcapi_struct->status); if (mcapi_struct->status == MGC_MCAPI_ERR_NOT_CONNECTED) { /* Get the receive side endpoint. */ rx_endp = mcapi_get_endpoint(FUNC_BACKEND_NODE_ID, 1024, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Connect the two endpoints. */ mcapi_connect_sclchan_i(tx_endp, rx_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to complete. */ mcapi_wait(&mcapi_struct->request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Indicate that the endpoint should be opened as a receiver. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_OPEN_RX_SIDE_SCL, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the receive side was opened. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the open to return successfully. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Close the send side. */ mcapi_sclchan_send_close_i(mcapi_struct->scl_tx_handle, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to close. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); } } /* Tell the other side to close the receive side. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CLOSE_RX_SIDE_SCL, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } } } } /* Tell the other side to delete the endpoint. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_DELETE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } /* Delete the extra endpoint. */ mcapi_delete_endpoint(tx_endp, &status); } /* Set the state of the test to completed. */ mcapi_struct->state = 0; /* Allow the next test to run. */ MCAPI_Release_Mutex(&MCAPID_FTS_Mutex); } /* MCAPI_FTS_Tx_2_32_5 */ /************************************************************************ * * FUNCTION * * MCAPI_FTS_Tx_2_32_6 * * DESCRIPTION * * Testing mcapi_sclchan_send_close_i - connect / open rx / open tx * / close tx * * Node 0 – Create endpoint, wait for connection, open receive side * * Node 1 – Create endpoint, get endpoint on Node 0, issue * connection, wait for rx to open, open send side, * close send side * *************************************************************************/ MCAPI_THREAD_ENTRY(MCAPI_FTS_Tx_2_32_6) { MCAPID_STRUCT *mcapi_struct = (MCAPID_STRUCT*)argv; size_t rx_len; mcapi_status_t status; mcapi_endpoint_t tx_endp, rx_endp; mcapi_request_t request; /* Don't let any other test run while this test is running. */ MCAPI_Obtain_Mutex(&MCAPID_FTS_Mutex); /* An extra endpoint is required for this test. */ tx_endp = mcapi_create_endpoint(MCAPI_PORT_ANY, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Indicate that a remote endpoint should be created. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CREATE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the endpoint was created. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Get the receive side endpoint. */ rx_endp = mcapi_get_endpoint(FUNC_BACKEND_NODE_ID, 1024, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Connect the two endpoints. */ mcapi_connect_sclchan_i(tx_endp, rx_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to open. */ mcapi_wait(&mcapi_struct->request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Indicate that the endpoint should be opened as a receiver. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_OPEN_RX_SIDE_SCL, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the receive side was opened. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Open the local endpoint as the sender. */ mcapi_open_sclchan_send_i(&mcapi_struct->scl_tx_handle, tx_endp, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the open to return successfully. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Close the send side. */ mcapi_sclchan_send_close_i(mcapi_struct->scl_tx_handle, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to close. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); } } } /* Tell the other side to close the receive side. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CLOSE_RX_SIDE_SCL, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } } } /* Tell the other side to delete the endpoint. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_DELETE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } /* Delete the extra endpoint. */ mcapi_delete_endpoint(tx_endp, &status); } /* Set the state of the test to completed. */ mcapi_struct->state = 0; /* Allow the next test to run. */ MCAPI_Release_Mutex(&MCAPID_FTS_Mutex); } /* MCAPI_FTS_Tx_2_32_6 */ /************************************************************************ * * FUNCTION * * MCAPI_FTS_Tx_2_32_7 * * DESCRIPTION * * Testing mcapi_sclchan_send_close_i - connect / open tx / open rx * / close tx * * Node 0 – Create endpoint, wait for connection, open receive side * * Node 1 – Create endpoint, get endpoint on Node 0, issue * connection, open send side, wait for rx to open, * close send side * *************************************************************************/ MCAPI_THREAD_ENTRY(MCAPI_FTS_Tx_2_32_7) { MCAPID_STRUCT *mcapi_struct = (MCAPID_STRUCT*)argv; size_t rx_len; mcapi_status_t status; mcapi_endpoint_t tx_endp, rx_endp; mcapi_request_t request; /* Don't let any other test run while this test is running. */ MCAPI_Obtain_Mutex(&MCAPID_FTS_Mutex); /* An extra endpoint is required for this test. */ tx_endp = mcapi_create_endpoint(MCAPI_PORT_ANY, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Indicate that a remote endpoint should be created. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CREATE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the endpoint was created. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Get the receive side endpoint. */ rx_endp = mcapi_get_endpoint(FUNC_BACKEND_NODE_ID, 1024, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Connect the two endpoints. */ mcapi_connect_sclchan_i(tx_endp, rx_endp, &mcapi_struct->request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to open. */ mcapi_wait(&mcapi_struct->request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); /* Open the local endpoint as the sender. */ mcapi_open_sclchan_send_i(&mcapi_struct->scl_tx_handle, tx_endp, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Indicate that the endpoint should be opened as a receiver. */ mcapi_struct->status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_OPEN_RX_SIDE_SCL, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for a response. */ mcapi_struct->status = MCAPID_RX_Mgmt_Response(mcapi_struct); /* If the receive side was opened. */ if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the open to return successfully. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Close the send side. */ mcapi_sclchan_send_close_i(mcapi_struct->scl_tx_handle, &request, &mcapi_struct->status); if (mcapi_struct->status == MCAPI_SUCCESS) { /* Wait for the connection to close. */ mcapi_wait(&request, &rx_len, &mcapi_struct->status, MCAPI_FTS_TIMEOUT); } } /* Tell the other side to close the receive side. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_CLOSE_RX_SIDE_SCL, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } } } } /* Tell the other side to delete the endpoint. */ status = MCAPID_TX_Mgmt_Message(mcapi_struct, MCAPID_MGMT_DELETE_ENDP, 1024, mcapi_struct->local_endp, 0, MCAPI_DEFAULT_PRIO); if (status == MCAPI_SUCCESS) { /* Wait for the response. */ status = MCAPID_RX_Mgmt_Response(mcapi_struct); } } } /* Delete the extra endpoint. */ mcapi_delete_endpoint(tx_endp, &status); } /* Set the state of the test to completed. */ mcapi_struct->state = 0; /* Allow the next test to run. */ MCAPI_Release_Mutex(&MCAPID_FTS_Mutex); } /* MCAPI_FTS_Tx_2_32_7 */