URL
https://opencores.org/ocsvn/mod_sim_exp/mod_sim_exp/trunk
Subversion Repositories mod_sim_exp
[/] [mod_sim_exp/] [tags/] [start_version/] [rtl/] [vhdl/] [core/] [first_stage.vhd] - Rev 91
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------------ -- -- Geoffrey Ottoy - DraMCo research group -- -- Module Name: first_stage.vhd / entity first_stage -- -- Last Modified: 24/11/2011 -- -- Description: first stage for use in the montgommery multiplier systolic -- array pipeline -- -- -- Dependencies: standard_cell_block -- cell_mux_1b -- register_n, -- register_1b, -- d_flip_flop -- -- Revision: -- Revision 4.00 - Removed input registers and used start signal as load_out_regs -- Revision 3.00 - Removed "a" input and replaced with "a_msb" (which is the only one -- that matters. -- Revision 2.02 - removed "ready" output signal -- Revision 2.01 - replaced the behavioral description of the registers with a -- component instantiation -- Revision 2.00 - added register to store input value xin (because this -- can change during operation) -- Revision 1.03 - added done pulse -- Revision 1.02 - appended "_i" to name of all internal signals -- Revision 1.01 - ready is '1' after reset -- Revision 1.00 - Architecture -- Revision 0.01 - File Created -- -- ------------------------------------------------------------------------------------ -- -- NOTICE: -- -- Copyright DraMCo research group. 2011. This code may be contain portions patented -- by other third parties! -- ------------------------------------------------------------------------------------ library IEEE; use IEEE.STD_LOGIC_1164.ALL; use IEEE.STD_LOGIC_ARITH.ALL; use IEEE.STD_LOGIC_UNSIGNED.ALL; ---- Uncomment the following library declaration if instantiating ---- any Xilinx primitives in this code. --library UNISIM; --use UNISIM.VComponents.all; entity first_stage is generic(width : integer := 16 -- must be the same as width of the standard stage ); port(core_clk : in STD_LOGIC; my : in STD_LOGIC_VECTOR((width) downto 0); y : in STD_LOGIC_VECTOR((width) downto 0); m : in STD_LOGIC_VECTOR((width) downto 0); xin : in STD_LOGIC; xout : out STD_LOGIC; qout : out STD_LOGIC; a_msb : in STD_LOGIC; cout : out STD_LOGIC; start : in STD_LOGIC; reset : in STD_LOGIC; -- ready : out STD_LOGIC; done : out STD_LOGIC; r : out STD_LOGIC_VECTOR((width-1) downto 0) ); end first_stage; architecture Structural of first_stage is component d_flip_flop port(core_clk : in STD_LOGIC; reset : in STD_LOGIC; din : in STD_LOGIC; dout : out STD_LOGIC ); end component; component register_1b port(core_clk : in STD_LOGIC; ce : in STD_LOGIC; reset : in STD_LOGIC; din : in STD_LOGIC; dout : out STD_LOGIC ); end component; component register_n generic( n : integer := 4 ); port(core_clk : in STD_LOGIC; ce : in STD_LOGIC; reset : in STD_LOGIC; din : in STD_LOGIC_VECTOR((n-1) downto 0); dout : out STD_LOGIC_VECTOR((n-1) downto 0) ); end component; component standard_cell_block generic ( width : integer := 32 ); Port ( my : in STD_LOGIC_VECTOR((width-1) downto 0); y : in STD_LOGIC_VECTOR((width-1) downto 0); m : in STD_LOGIC_VECTOR((width-1) downto 0); x : in STD_LOGIC; q : in STD_LOGIC; a : in STD_LOGIC_VECTOR((width-1) downto 0); cin : in STD_LOGIC; cout : out STD_LOGIC; r : out STD_LOGIC_VECTOR((width-1) downto 0)); end component; component cell_1b_mux port ( my : in STD_LOGIC; y : in STD_LOGIC; m : in STD_LOGIC; x : in STD_LOGIC; q : in STD_LOGIC; result : out STD_LOGIC); end component; -- input signal xin_i : std_logic; signal a_msb_i : std_logic; -- signal xin_reg_i : std_logic; -- signal a_msb_reg_i : std_logic; -- output signal cout_i : std_logic; signal r_i : std_logic_vector((width-1) downto 0); signal cout_reg_i : std_logic; signal xout_reg_i : std_logic; signal qout_reg_i : std_logic; signal r_reg_i : std_logic_vector((width-1) downto 0); -- interconnection signal q_i : std_logic; signal c_i : std_logic; signal first_res_i : std_logic; signal a_i : std_logic_vector((width) downto 0); -- control signals signal done_i : std_logic := '1'; --signal ready_del_i : std_logic := '1'; -- signal load_out_regs_i : std_logic; begin -- map inputs to internal signals xin_i <= xin; a_msb_i <= a_msb; -- map internal signals to outputs done <= done_i; r <= r_reg_i; cout <= cout_reg_i; qout <= qout_reg_i; xout <= xout_reg_i; -- two posibilities: --done <= ready_i and (not ready_del_i); -- slow --done <= not ready_i; -- faster but not sure if it will work (DONE_PROC can be omitted) -- a_i <= a_msb_reg_i & r_reg_i; a_i <= a_msb_i & r_reg_i; -- -- input registers -- A_REG: register_1b -- port map(core_clk => core_clk, -- ce => start, -- reset => reset, -- din => a_msb_i, -- dout => a_msb_reg_i -- ); -- -- XIN_REG: register_1b -- port map(core_clk => core_clk, -- ce => start, -- reset => reset, -- din => xin_i, -- dout => xin_reg_i -- ); -- compute first q_i and carry -- q_i <= a_i(0) xor (y(0) and xin_reg_i); q_i <= a_i(0) xor (y(0) and xin_i); c_i <= a_i(0) and first_res_i; first_cell: cell_1b_mux port map( my => my(0), y => y(0), m => m(0), -- x => xin_reg_i, x => xin_i, q => q_i, result => first_res_i ); cell_block: standard_cell_block generic map( width => width ) port map( my => my(width downto 1), y => y(width downto 1), m => m(width downto 1), -- x => xin_reg_i, x => xin_i, q => q_i, a => a_i(width downto 1), cin => c_i, cout => cout_i, r => r_i((width-1) downto 0) ); -- delay_1_cycle: d_flip_flop -- port map(core_clk => core_clk, -- reset => reset, -- din => start, -- dout => load_out_regs_i -- ); done_signal: d_flip_flop port map(core_clk => core_clk, reset => reset, -- din => load_out_regs_i, din => start, dout => done_i ); -- output registers RESULT_REG: register_n generic map( n => width ) port map(core_clk => core_clk, -- ce => load_out_regs_i, ce => start, reset => reset, din => r_i, dout => r_reg_i ); XOUT_REG: register_1b port map(core_clk => core_clk, -- ce => load_out_regs_i, ce => start, reset => reset, -- din => xin_reg_i, din => xin_i, dout => xout_reg_i ); QOUT_REG: register_1b port map(core_clk => core_clk, -- ce => load_out_regs_i, ce => start, reset => reset, din => q_i, dout => qout_reg_i ); COUT_REG: register_1b port map(core_clk => core_clk, -- ce => load_out_regs_i, ce => start, reset => reset, din => cout_i, dout => cout_reg_i ); end Structural;
Go to most recent revision | Compare with Previous | Blame | View Log