OpenCores
URL https://opencores.org/ocsvn/neorv32/neorv32/trunk

Subversion Repositories neorv32

[/] [neorv32/] [trunk/] [docs/] [userguide/] [content.adoc] - Rev 71

Go to most recent revision | Compare with Previous | Blame | View Log

Let's Get It Started!

This user guide uses the NEORV32 project _as is_ from the official `neorv32` repository.
To make your first NEORV32 project run, follow the guides from the upcoming sections. It is recommended to
follow these guides step by step and eventually in the presented order.

[TIP]
This guide uses the minimalistic and platform/toolchain agnostic SoC **test setups** from
`rtl/test_setups` for illustration. You can use one of the provided test setups for
your first FPGA tests. +
 +
For more sophisticated example setups have a look at the
https://github.com/stnolting/neorv32-setups[neorv32-setups] repository,
which provides **SoC setups** for various FPGAs, boards and toolchains.


include::sw_toolchain_setup.adoc[]

include::general_hw_setup.adoc[]

include::general_sw_framework_setup.adoc[]

include::application_program_compilation.adoc[]

include::executable_upload.adoc[]

include::installing_an_executable.adoc[]

include::new_application_project.adoc[]

include::enabling_riscv_extensions.adoc[]

include::application_specific_configuration.adoc[]

include::adding_custom_hw_modules.adoc[]

include::customizing_the_bootloader.adoc[]

include::programming_an_external_spi_flash_via_bootloader.adoc[]

include::packaging_vivado.adoc[]

include::simulating_the_processor.adoc[]

include::building_the_documentation.adoc[]

include::zephyr_support.adoc[]

include::free_rtos_support.adoc[]

include::riscv_architecture_tests.adoc[]

include::debugging_with_ocd.adoc[]



include::../legal.adoc[]

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.