OpenCores
URL https://opencores.org/ocsvn/openarty/openarty/trunk

Subversion Repositories openarty

[/] [openarty/] [trunk/] [sw/] [host/] [eqspiscope.cpp] - Rev 35

Go to most recent revision | Compare with Previous | Blame | View Log

////////////////////////////////////////////////////////////////////////////////
//
// Filename: 	eqspiscope.cpp
//
// Project:	XuLA2-LX25 SoC based upon the ZipCPU
//
// Purpose:	This program decodes the bits in the debugging wires output
//		from the eqspiflash module, and stored in the Wishbone Scope
//	device.  The result is placed on the screen output, so you can see what
//	is going on internal to the device.
//		
//
// Creator:	Dan Gisselquist, Ph.D.
//		Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2015-2016, Gisselquist Technology, LLC
//
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of  the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with this program.  (It's in the $(ROOT)/doc directory, run make with no
// target there if the PDF file isn't present.)  If not, see
// <http://www.gnu.org/licenses/> for a copy.
//
// License:	GPL, v3, as defined and found on www.gnu.org,
//		http://www.gnu.org/licenses/gpl.html
//
//
////////////////////////////////////////////////////////////////////////////////
//
//
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <strings.h>
#include <ctype.h>
#include <string.h>
#include <signal.h>
#include <assert.h>
 
#include "port.h"
#include "regdefs.h"
#include "scopecls.h"
 
#define	WBSCOPE		R_QSCOPE
#define	WBSCOPEDATA	R_QSCOPED
 
FPGA	*m_fpga;
void	closeup(int v) {
	m_fpga->kill();
	exit(0);
}
 
class	EQSPISCOPE : public SCOPE {
	// While I put these in at one time, they really mess up other scopes,
	// since setting parameters based upon the debug word forces the decoder
	// to be non-constant, calling methods change, etc., etc., etc.
	//
	// int	m_oword[2], m_iword[2], m_p;
public:
	EQSPISCOPE(FPGA *fpga, unsigned addr, bool vecread)
		: SCOPE(fpga, addr, false, vecread) {};
	~EQSPISCOPE(void) {}
	virtual	void	decode(DEVBUS::BUSW val) const {
		int	cyc, cstb, dstb, ack, back, accepted, valid, word,
			out, cs, sck, mod, odat, idat;
 
		cyc      = (val>>31)&1;
		cstb     = (val>>30)&1;
		dstb     = (val>>29)&1;
		ack      = (val>>28)&1;
		back     = (val>>27)&1;
		accepted = (val>>26)&1;
		valid    = (val>>25)&1;
		word     = (val>>18)&0x07f;
		out      = (val>>12)&0x03f;
		cs       = (val>>11)&1;
		sck      = (val>>10)&1;
		mod      = (val>> 8)&3;
		odat     = (val>> 4)&15;
		idat     = (val    )&15;
 
		/*
		m_p = (m_p^1)&1;
		if (mod&2) {
			m_oword[m_p] = (m_oword[m_p]<<4)|odat;
			m_iword[m_p] = (m_iword[m_p]<<4)|idat;
		} else {
			m_oword[m_p] = (m_oword[m_p]<<1)|(odat&1);
			m_iword[m_p] = (m_iword[m_p]<<1)|((idat&2)?1:0);
		}
		*/
 
		printf("%s%s%s%s%s%s%s %02x %02x %s%s %d %x.%d->  ->%x.%d",
			(cyc)?"CYC ":"    ",
			(cstb)?"CSTB":"    ",
			(dstb)?"DSTB":"    ",
			(ack)?"AK":"  ",
			(back)?"+":" ",
			(accepted)?"ACC":"   ",
			(valid)?"V":" ",
			word<<1, out<<2,
			(cs)?"  ":"CS",
			(sck)?"CK":"  ",
			(mod), odat, (odat&1)?1:0, idat, (idat&2)?1:0);
 
		// printf("  / %08x -> %08x", m_oword[m_p], m_iword[m_p]);
 
	}
};
 
int main(int argc, char **argv) {
	int	skp=0, port = FPGAPORT;
	bool	use_usb = false;
 
	skp=1;
	for(int argn=0; argn<argc-skp; argn++) {
		if (argv[argn+skp][0] == '-') {
			if (argv[argn+skp][1] == 'u')
				use_usb = true;
			else if (argv[argn+skp][1] == 'p') {
				use_usb = false;
				if (isdigit(argv[argn+skp][2]))
					port = atoi(&argv[argn+skp][2]);
			}
			skp++; argn--;
		} else
			argv[argn] = argv[argn+skp];
	} argc -= skp;
 
	FPGAOPEN(m_fpga);
 
	signal(SIGSTOP, closeup);
	signal(SIGHUP, closeup);
 
	EQSPISCOPE *scope = new EQSPISCOPE(m_fpga, WBSCOPE, false);
	if (!scope->ready()) {
		printf("Scope is not yet ready:\n");
		scope->decode_control();
	} else
		scope->read();
	delete	m_fpga;
}
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.