OpenCores
URL https://opencores.org/ocsvn/openarty/openarty/trunk

Subversion Repositories openarty

[/] [openarty/] [trunk/] [sw/] [host/] [program.sh] - Rev 30

Go to most recent revision | Compare with Previous | Blame | View Log

#!/bin/bash
################################################################################
##
## Filename: 	program.sh
##
## Project:	OpenArty, an entirely open SoC based upon the Arty platform
##
## Purpose:	To install a new program into the Arty, using the alternate
##		programming slot (slot 1, starting at 0x470000).
##
## Creator:	Dan Gisselquist, Ph.D.
##		Gisselquist Technology, LLC
##
################################################################################
##
## Copyright (C) 2015-2016, Gisselquist Technology, LLC
##
## This program is free software (firmware): you can redistribute it and/or
## modify it under the terms of  the GNU General Public License as published
## by the Free Software Foundation, either version 3 of the License, or (at
## your option) any later version.
##
## This program is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with this program.  (It's in the $(ROOT)/doc directory, run make with no
## target there if the PDF file isn't present.)  If not, see
## <http://www.gnu.org/licenses/> for a copy.
##
## License:	GPL, v3, as defined and found on www.gnu.org,
##		http://www.gnu.org/licenses/gpl.html
##
##
################################################################################
##
##
export PATH=$PATH:.
export BINFILE=../../xilinx/openarty.runs/impl_1/toplevel.bit
 
WBREGS=wbregs
WBPROG=wbprogram
 
# 
# $WBREGS qspiv 0x8b	# Accomplished by the flash driver
#
$WBREGS stopwatch 2	# Clear and stop the stopwatch
$WBREGS stopwatch 1	# Start the stopwatch
$WBPROG @0x0470000 $BINFILE
$WBREGS stopwatch 0	# Stop the stopwatch, we are done
$WBREGS stopwatch	# Print out the time on the stopwatch
 
$WBREGS wbstar 0x01c0000
$WBREGS fpgacmd 15
sleep 1
 
 
RED=0x00ff0000
GREEN=0x0000ff00
WHITE=0x00070707
BLACK=0x00000000
DIMGREEN=0x00001f00
 
$WBREGS led 0x0ff
$WBREGS clrled0 $RED
$WBREGS clrled1 $RED
$WBREGS clrled2 $RED
$WBREGS clrled3 $RED
 
sleep 1
$WBREGS clrled0 $GREEN
$WBREGS led 0x10
sleep 1
$WBREGS clrled1 $GREEN
$WBREGS clrled0 $DIMGREEN
$WBREGS led 0x20
sleep 1
$WBREGS clrled2 $GREEN
$WBREGS clrled1 $DIMGREEN
$WBREGS led 0x40
 
if [[ -x ./wbsettime ]]; then
  ./wbsettime
fi
 
$WBREGS clrled3 $GREEN
$WBREGS clrled2 $DIMGREEN
$WBREGS led 0x80
sleep 1
$WBREGS clrled0 $WHITE
$WBREGS clrled1 $WHITE
$WBREGS clrled2 $WHITE
$WBREGS clrled3 $WHITE
$WBREGS led 0x00
 
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.