Subversion Repositories openmsp430

//----------------------------------------------------------------------------
// Copyright (C) 2001 Authors
//
// This source file may be used and distributed without restriction provided
// that this copyright statement is not removed from the file and that any
// derivative work contains the original copyright notice and the associated
// disclaimer.
//
// This source file is free software; you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published
// by the Free Software Foundation; either version 2.1 of the License, or
// (at your option) any later version.
//
// This source is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
// License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with this source; if not, write to the Free Software Foundation,
// Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
//
//----------------------------------------------------------------------------
// 
// *File Name: ram.v
// 
// *Module Description:
//                      Scalable RAM model
//
// *Author(s):
//              - Olivier Girard,    olgirard@gmail.com
//
//----------------------------------------------------------------------------
// $Rev: 84 $
// $LastChangedBy: olivier.girard $
// $LastChangedDate: 2011-01-23 21:00:36 +0100 (Sun, 23 Jan 2011) $
//----------------------------------------------------------------------------
`include "timescale.v"
`include "openMSP430_defines.v"
 
module ram (
 
// OUTPUTs
    ram_dout,                      // RAM data output
 
// INPUTs
    ram_addr,                      // RAM address
    ram_cen,                       // RAM chip enable (low active)
    ram_clk,                       // RAM clock
    ram_din,                       // RAM data input
    ram_wen                        // RAM write enable (low active)
);
 
// PARAMETERs
//============
parameter ADDR_MSB   =  6;         // MSB of the address bus
parameter MEM_SIZE   =  256;       // Memory size in bytes
 
// OUTPUTs
//============
output      [15:0] ram_dout;       // RAM data output
 
// INPUTs
//============
input [ADDR_MSB:0] ram_addr;       // RAM address
input              ram_cen;        // RAM chip enable (low active)
input              ram_clk;        // RAM clock
input       [15:0] ram_din;        // RAM data input
input        [1:0] ram_wen;        // RAM write enable (low active)
 
 
// RAM
//============
 
reg         [15:0] mem [0:(MEM_SIZE/2)-1];
reg   [ADDR_MSB:0] ram_addr_reg;
 
wire        [15:0] mem_val = mem[ram_addr];
 
 
always @(posedge ram_clk)
  if (~ram_cen & ram_addr<(MEM_SIZE/2))
    begin
      if      (ram_wen==2'b00) mem[ram_addr] <= ram_din;
      else if (ram_wen==2'b01) mem[ram_addr] <= {ram_din[15:8], mem_val[7:0]};
      else if (ram_wen==2'b10) mem[ram_addr] <= {mem_val[15:8], ram_din[7:0]};
      ram_addr_reg <= ram_addr;
    end
 
assign ram_dout = mem[ram_addr_reg];
 
 
endmodule // ram