URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [ada/] [sigtramp-ppcvxw.c] - Rev 848
Go to most recent revision | Compare with Previous | Blame | View Log
/**************************************************************************** * * * GNAT COMPILER COMPONENTS * * * * S I G T R A M P * * * * Asm Implementation File * * * * Copyright (C) 2011-2012, Free Software Foundation, Inc. * * * * GNAT is free software; you can redistribute it and/or modify it under * * terms of the GNU General Public License as published by the Free Soft- * * ware Foundation; either version 3, or (at your option) any later ver- * * sion. GNAT is distributed in the hope that it will be useful, but WITH- * * OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * * or FITNESS FOR A PARTICULAR PURPOSE. * * * * As a special exception under Section 7 of GPL version 3, you are granted * * additional permissions described in the GCC Runtime Library Exception, * * version 3.1, as published by the Free Software Foundation. * * * * You should have received a copy of the GNU General Public License and * * a copy of the GCC Runtime Library Exception along with this program; * * see the files COPYING3 and COPYING.RUNTIME respectively. If not, see * * <http://www.gnu.org/licenses/>. * * * * GNAT was originally developed by the GNAT team at New York University. * * Extensive contributions were provided by Ada Core Technologies Inc. * * * ****************************************************************************/ /********************************************************** * PowerPC-VxWorks version of the __gnat_sigtramp service * **********************************************************/ #include "sigtramp.h" #include <vxWorks.h> #include <arch/../regs.h> #include <sigLib.h> /* ---------------------- -- General comments -- ---------------------- Stubs are generated from toplevel asms and .cfi directives, much simpler to use and check for correctness than manual encodings of CFI byte sequences. The general idea is to establish CFA as sigcontext->sc_pregs and state where to find the registers as offsets from there. As of today, we support a single stub, providing CFI info for common registers (GPRs, LR, ...). We might need variants with support for floating point or altivec registers as well at some point. Checking which variant should apply and getting at sc_pregs is simpler to express in C (we can't use offsetof in toplevel asms and hardcoding constants is not workable with the flurry of VxWorks variants), so this is the choice for our toplevel interface. Note that the registers we "restore" here are those to which we have direct access through the system sigcontext structure, which includes only a partial set of the non-volatiles ABI-wise. */ /* ----------------------------------------- -- Protypes for our internal asm stubs -- ----------------------------------------- SC_PREGS is always expected to be SIGCONTEXT->sc_pregs. Eventhough our symbols will remain local, the prototype claims "extern" and not "static" to prevent compiler complaints about a symbol used but never defined. */ /* sigtramp stub providing CFI info for common registers. */ extern void __gnat_sigtramp_common (int signo, void *siginfo, void *sigcontext, sighandler_t * handler, void * sc_pregs); /* ------------------------------------- -- Common interface implementation -- ------------------------------------- We enforce optimization to minimize the overhead of the extra layer. */ void __gnat_sigtramp (int signo, void *si, void *sc, sighandler_t * handler) __attribute__((optimize(2))); void __gnat_sigtramp (int signo, void *si, void *sc, sighandler_t * handler) { struct sigcontext * sctx = (struct sigcontext *) sc; __gnat_sigtramp_common (signo, si, sctx, handler, sctx->sc_pregs); } /* --------------------------- -- And now the asm stubs -- --------------------------- They all have a common structure with blocks of asm sequences queued one after the others. Typically: SYMBOL_START CFI_DIRECTIVES CFI_DEF_CFA, CFI_COMMON_REGISTERS, ... STUB_BODY asm code to establish frame, setup the cfa reg value, call the real signal handler, ... SYMBOL_END */ /*-------------------------------- -- Misc constants and helpers -- -------------------------------- */ /* REGNO constants, dwarf column numbers for registers of interest. */ #define REGNO_LR 65 #define REGNO_CTR 66 #define REGNO_CR 70 #define REGNO_XER 76 #define REGNO_GR(N) (N) #define REGNO_PC 67 /* ARG_POINTER_REGNUM */ /* asm string contruction helpers. */ #define STR(TEXT) #TEXT /* stringify expanded TEXT, surrounding it with double quotes. */ #define S(E) STR(E) /* stringify E, which will resolve as text but may contain macros still to be expanded. */ /* asm (TEXT) outputs <tab>TEXT. These facilitate the output of multine contents: */ #define TAB(S) "\t" S #define CR(S) S "\n" #undef TCR #define TCR(S) TAB(CR(S)) /*------------------------------ -- Stub construction blocks -- ------------------------------ */ /* CFA setup block --------------- Only non-volatile registers are suitable for a CFA base. These are the only ones we can expect to be able retrieve from the unwinding context while walking up the chain, saved by at least the bottom-most exception propagation services. We use r15 here and set it to the value we need in stub body that follows. Note that r14 is inappropriate here, even though it is non-volatile according to the ABI, because GCC uses it as an extra SCRATCH on SPE targets. */ #define CFA_REG 15 #define CFI_DEF_CFA \ CR(".cfi_def_cfa " S(CFA_REG) ", 0") /* Register location blocks ------------------------ Rules to find registers of interest from the CFA. This should comprise all the non-volatile registers relevant to the interrupted context. Note that we include r1 in this set, unlike the libgcc unwinding fallbacks. This is useful for fallbacks to allow the use of r1 in CFI expressions and the absence of rule for r1 gets compensated by using the target CFA instead. We don't need the expression facility here and setup a fake CFA to allow very simple offset expressions, so having a rule for r1 is the proper thing to do. We for sure have observed crashes in some cases without it. */ #define COMMON_CFI(REG) \ ".cfi_offset " S(REGNO_##REG) "," S(REG_SET_##REG) #define CFI_COMMON_REGS \ CR("# CFI for common registers\n") \ TCR(COMMON_CFI(GR(1))) \ TCR(COMMON_CFI(GR(2))) \ TCR(COMMON_CFI(GR(3))) \ TCR(COMMON_CFI(GR(4))) \ TCR(COMMON_CFI(GR(5))) \ TCR(COMMON_CFI(GR(6))) \ TCR(COMMON_CFI(GR(7))) \ TCR(COMMON_CFI(GR(8))) \ TCR(COMMON_CFI(GR(9))) \ TCR(COMMON_CFI(GR(10))) \ TCR(COMMON_CFI(GR(11))) \ TCR(COMMON_CFI(GR(12))) \ TCR(COMMON_CFI(GR(13))) \ TCR(COMMON_CFI(GR(14))) \ TCR(COMMON_CFI(GR(15))) \ TCR(COMMON_CFI(GR(16))) \ TCR(COMMON_CFI(GR(17))) \ TCR(COMMON_CFI(GR(18))) \ TCR(COMMON_CFI(GR(19))) \ TCR(COMMON_CFI(GR(20))) \ TCR(COMMON_CFI(GR(21))) \ TCR(COMMON_CFI(GR(22))) \ TCR(COMMON_CFI(GR(23))) \ TCR(COMMON_CFI(GR(24))) \ TCR(COMMON_CFI(GR(25))) \ TCR(COMMON_CFI(GR(26))) \ TCR(COMMON_CFI(GR(27))) \ TCR(COMMON_CFI(GR(28))) \ TCR(COMMON_CFI(GR(29))) \ TCR(COMMON_CFI(GR(30))) \ TCR(COMMON_CFI(GR(31))) \ TCR(COMMON_CFI(LR)) \ TCR(COMMON_CFI(CR)) \ TCR(COMMON_CFI(CTR)) \ TCR(COMMON_CFI(XER)) \ TCR(COMMON_CFI(PC)) \ TCR(".cfi_return_column " S(REGNO_PC)) /* Trampoline body block --------------------- */ #define SIGTRAMP_BODY \ CR("") \ TCR("# Allocate frame and save the non-volatile") \ TCR("# registers we're going to modify") \ TCR("stwu %r1,-16(%r1)") \ TCR("mflr %r0") \ TCR("stw %r0,20(%r1)") \ TCR("stw %r" S(CFA_REG) ",8(%r1)") \ TCR("") \ TCR("# Setup CFA_REG = sc_pregs, that we'll retrieve as our CFA value") \ TCR("mr %r" S(CFA_REG) ", %r7") \ TCR("") \ TCR("# Call the real handler. The signo, siginfo and sigcontext") \ TCR("# arguments are the same as those we received in r3, r4 and r5") \ TCR("mtctr %r6") \ TCR("bctrl") \ TCR("") \ TCR("# Restore our callee-saved items, release our frame and return") \ TCR("lwz %r" S(CFA_REG) ",8(%r1)") \ TCR("lwz %r0,20(%r1)") \ TCR("mtlr %r0") \ TCR("") \ TCR("addi %r1,%r1,16") \ TCR("blr") /* Symbol definition block ----------------------- */ #define SIGTRAMP_START(SYM) \ CR("# " S(SYM) " cfi trampoline") \ TCR(".type " S(SYM) ", @function") \ CR("") \ CR(S(SYM) ":") \ TCR(".cfi_startproc") \ TCR(".cfi_signal_frame") /* Symbol termination block ------------------------ */ #define SIGTRAMP_END(SYM) \ CR(".cfi_endproc") \ TCR(".size " S(SYM) ", .-" S(SYM)) /*---------------------------- -- And now, the real code -- ---------------------------- */ /* Text section start. The compiler isn't aware of that switch. */ asm (".text\n" TCR(".align 2")); /* sigtramp stub for common registers. */ #define TRAMP_COMMON __gnat_sigtramp_common asm (SIGTRAMP_START(TRAMP_COMMON)); asm (CFI_DEF_CFA); asm (CFI_COMMON_REGS); asm (SIGTRAMP_BODY); asm (SIGTRAMP_END(TRAMP_COMMON));
Go to most recent revision | Compare with Previous | Blame | View Log