URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [explow.c] - Rev 694
Go to most recent revision | Compare with Previous | Blame | View Log
/* Subroutines for manipulating rtx's in semantically interesting ways. Copyright (C) 1987, 1991, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */ #include "config.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "diagnostic-core.h" #include "rtl.h" #include "tree.h" #include "tm_p.h" #include "flags.h" #include "except.h" #include "function.h" #include "expr.h" #include "optabs.h" #include "libfuncs.h" #include "hard-reg-set.h" #include "insn-config.h" #include "ggc.h" #include "recog.h" #include "langhooks.h" #include "target.h" #include "common/common-target.h" #include "output.h" static rtx break_out_memory_refs (rtx); /* Truncate and perhaps sign-extend C as appropriate for MODE. */ HOST_WIDE_INT trunc_int_for_mode (HOST_WIDE_INT c, enum machine_mode mode) { int width = GET_MODE_PRECISION (mode); /* You want to truncate to a _what_? */ gcc_assert (SCALAR_INT_MODE_P (mode)); /* Canonicalize BImode to 0 and STORE_FLAG_VALUE. */ if (mode == BImode) return c & 1 ? STORE_FLAG_VALUE : 0; /* Sign-extend for the requested mode. */ if (width < HOST_BITS_PER_WIDE_INT) { HOST_WIDE_INT sign = 1; sign <<= width - 1; c &= (sign << 1) - 1; c ^= sign; c -= sign; } return c; } /* Return an rtx for the sum of X and the integer C. */ rtx plus_constant (rtx x, HOST_WIDE_INT c) { RTX_CODE code; rtx y; enum machine_mode mode; rtx tem; int all_constant = 0; if (c == 0) return x; restart: code = GET_CODE (x); mode = GET_MODE (x); y = x; switch (code) { case CONST_INT: return GEN_INT (INTVAL (x) + c); case CONST_DOUBLE: { unsigned HOST_WIDE_INT l1 = CONST_DOUBLE_LOW (x); HOST_WIDE_INT h1 = CONST_DOUBLE_HIGH (x); unsigned HOST_WIDE_INT l2 = c; HOST_WIDE_INT h2 = c < 0 ? ~0 : 0; unsigned HOST_WIDE_INT lv; HOST_WIDE_INT hv; add_double (l1, h1, l2, h2, &lv, &hv); return immed_double_const (lv, hv, VOIDmode); } case MEM: /* If this is a reference to the constant pool, try replacing it with a reference to a new constant. If the resulting address isn't valid, don't return it because we have no way to validize it. */ if (GET_CODE (XEXP (x, 0)) == SYMBOL_REF && CONSTANT_POOL_ADDRESS_P (XEXP (x, 0))) { tem = force_const_mem (GET_MODE (x), plus_constant (get_pool_constant (XEXP (x, 0)), c)); if (memory_address_p (GET_MODE (tem), XEXP (tem, 0))) return tem; } break; case CONST: /* If adding to something entirely constant, set a flag so that we can add a CONST around the result. */ x = XEXP (x, 0); all_constant = 1; goto restart; case SYMBOL_REF: case LABEL_REF: all_constant = 1; break; case PLUS: /* The interesting case is adding the integer to a sum. Look for constant term in the sum and combine with C. For an integer constant term, we make a combined integer. For a constant term that is not an explicit integer, we cannot really combine, but group them together anyway. Restart or use a recursive call in case the remaining operand is something that we handle specially, such as a SYMBOL_REF. We may not immediately return from the recursive call here, lest all_constant gets lost. */ if (CONST_INT_P (XEXP (x, 1))) { c += INTVAL (XEXP (x, 1)); if (GET_MODE (x) != VOIDmode) c = trunc_int_for_mode (c, GET_MODE (x)); x = XEXP (x, 0); goto restart; } else if (CONSTANT_P (XEXP (x, 1))) { x = gen_rtx_PLUS (mode, XEXP (x, 0), plus_constant (XEXP (x, 1), c)); c = 0; } else if (find_constant_term_loc (&y)) { /* We need to be careful since X may be shared and we can't modify it in place. */ rtx copy = copy_rtx (x); rtx *const_loc = find_constant_term_loc (©); *const_loc = plus_constant (*const_loc, c); x = copy; c = 0; } break; default: break; } if (c != 0) x = gen_rtx_PLUS (mode, x, GEN_INT (c)); if (GET_CODE (x) == SYMBOL_REF || GET_CODE (x) == LABEL_REF) return x; else if (all_constant) return gen_rtx_CONST (mode, x); else return x; } /* If X is a sum, return a new sum like X but lacking any constant terms. Add all the removed constant terms into *CONSTPTR. X itself is not altered. The result != X if and only if it is not isomorphic to X. */ rtx eliminate_constant_term (rtx x, rtx *constptr) { rtx x0, x1; rtx tem; if (GET_CODE (x) != PLUS) return x; /* First handle constants appearing at this level explicitly. */ if (CONST_INT_P (XEXP (x, 1)) && 0 != (tem = simplify_binary_operation (PLUS, GET_MODE (x), *constptr, XEXP (x, 1))) && CONST_INT_P (tem)) { *constptr = tem; return eliminate_constant_term (XEXP (x, 0), constptr); } tem = const0_rtx; x0 = eliminate_constant_term (XEXP (x, 0), &tem); x1 = eliminate_constant_term (XEXP (x, 1), &tem); if ((x1 != XEXP (x, 1) || x0 != XEXP (x, 0)) && 0 != (tem = simplify_binary_operation (PLUS, GET_MODE (x), *constptr, tem)) && CONST_INT_P (tem)) { *constptr = tem; return gen_rtx_PLUS (GET_MODE (x), x0, x1); } return x; } /* Return an rtx for the size in bytes of the value of EXP. */ rtx expr_size (tree exp) { tree size; if (TREE_CODE (exp) == WITH_SIZE_EXPR) size = TREE_OPERAND (exp, 1); else { size = tree_expr_size (exp); gcc_assert (size); gcc_assert (size == SUBSTITUTE_PLACEHOLDER_IN_EXPR (size, exp)); } return expand_expr (size, NULL_RTX, TYPE_MODE (sizetype), EXPAND_NORMAL); } /* Return a wide integer for the size in bytes of the value of EXP, or -1 if the size can vary or is larger than an integer. */ HOST_WIDE_INT int_expr_size (tree exp) { tree size; if (TREE_CODE (exp) == WITH_SIZE_EXPR) size = TREE_OPERAND (exp, 1); else { size = tree_expr_size (exp); gcc_assert (size); } if (size == 0 || !host_integerp (size, 0)) return -1; return tree_low_cst (size, 0); } /* Return a copy of X in which all memory references and all constants that involve symbol refs have been replaced with new temporary registers. Also emit code to load the memory locations and constants into those registers. If X contains no such constants or memory references, X itself (not a copy) is returned. If a constant is found in the address that is not a legitimate constant in an insn, it is left alone in the hope that it might be valid in the address. X may contain no arithmetic except addition, subtraction and multiplication. Values returned by expand_expr with 1 for sum_ok fit this constraint. */ static rtx break_out_memory_refs (rtx x) { if (MEM_P (x) || (CONSTANT_P (x) && CONSTANT_ADDRESS_P (x) && GET_MODE (x) != VOIDmode)) x = force_reg (GET_MODE (x), x); else if (GET_CODE (x) == PLUS || GET_CODE (x) == MINUS || GET_CODE (x) == MULT) { rtx op0 = break_out_memory_refs (XEXP (x, 0)); rtx op1 = break_out_memory_refs (XEXP (x, 1)); if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1)) x = simplify_gen_binary (GET_CODE (x), GET_MODE (x), op0, op1); } return x; } /* Given X, a memory address in address space AS' pointer mode, convert it to an address in the address space's address mode, or vice versa (TO_MODE says which way). We take advantage of the fact that pointers are not allowed to overflow by commuting arithmetic operations over conversions so that address arithmetic insns can be used. */ rtx convert_memory_address_addr_space (enum machine_mode to_mode ATTRIBUTE_UNUSED, rtx x, addr_space_t as ATTRIBUTE_UNUSED) { #ifndef POINTERS_EXTEND_UNSIGNED gcc_assert (GET_MODE (x) == to_mode || GET_MODE (x) == VOIDmode); return x; #else /* defined(POINTERS_EXTEND_UNSIGNED) */ enum machine_mode pointer_mode, address_mode, from_mode; rtx temp; enum rtx_code code; /* If X already has the right mode, just return it. */ if (GET_MODE (x) == to_mode) return x; pointer_mode = targetm.addr_space.pointer_mode (as); address_mode = targetm.addr_space.address_mode (as); from_mode = to_mode == pointer_mode ? address_mode : pointer_mode; /* Here we handle some special cases. If none of them apply, fall through to the default case. */ switch (GET_CODE (x)) { case CONST_INT: case CONST_DOUBLE: if (GET_MODE_SIZE (to_mode) < GET_MODE_SIZE (from_mode)) code = TRUNCATE; else if (POINTERS_EXTEND_UNSIGNED < 0) break; else if (POINTERS_EXTEND_UNSIGNED > 0) code = ZERO_EXTEND; else code = SIGN_EXTEND; temp = simplify_unary_operation (code, to_mode, x, from_mode); if (temp) return temp; break; case SUBREG: if ((SUBREG_PROMOTED_VAR_P (x) || REG_POINTER (SUBREG_REG (x))) && GET_MODE (SUBREG_REG (x)) == to_mode) return SUBREG_REG (x); break; case LABEL_REF: temp = gen_rtx_LABEL_REF (to_mode, XEXP (x, 0)); LABEL_REF_NONLOCAL_P (temp) = LABEL_REF_NONLOCAL_P (x); return temp; break; case SYMBOL_REF: temp = shallow_copy_rtx (x); PUT_MODE (temp, to_mode); return temp; break; case CONST: return gen_rtx_CONST (to_mode, convert_memory_address_addr_space (to_mode, XEXP (x, 0), as)); break; case PLUS: case MULT: /* FIXME: For addition, we used to permute the conversion and addition operation only if one operand is a constant and converting the constant does not change it or if one operand is a constant and we are using a ptr_extend instruction (POINTERS_EXTEND_UNSIGNED < 0) even if the resulting address may overflow/underflow. We relax the condition to include zero-extend (POINTERS_EXTEND_UNSIGNED > 0) since the other parts of the compiler depend on it. See PR 49721. We can always safely permute them if we are making the address narrower. */ if (GET_MODE_SIZE (to_mode) < GET_MODE_SIZE (from_mode) || (GET_CODE (x) == PLUS && CONST_INT_P (XEXP (x, 1)) && (POINTERS_EXTEND_UNSIGNED != 0 || XEXP (x, 1) == convert_memory_address_addr_space (to_mode, XEXP (x, 1), as)))) return gen_rtx_fmt_ee (GET_CODE (x), to_mode, convert_memory_address_addr_space (to_mode, XEXP (x, 0), as), XEXP (x, 1)); break; default: break; } return convert_modes (to_mode, from_mode, x, POINTERS_EXTEND_UNSIGNED); #endif /* defined(POINTERS_EXTEND_UNSIGNED) */ } /* Return something equivalent to X but valid as a memory address for something of mode MODE in the named address space AS. When X is not itself valid, this works by copying X or subexpressions of it into registers. */ rtx memory_address_addr_space (enum machine_mode mode, rtx x, addr_space_t as) { rtx oldx = x; enum machine_mode address_mode = targetm.addr_space.address_mode (as); x = convert_memory_address_addr_space (address_mode, x, as); /* By passing constant addresses through registers we get a chance to cse them. */ if (! cse_not_expected && CONSTANT_P (x) && CONSTANT_ADDRESS_P (x)) x = force_reg (address_mode, x); /* We get better cse by rejecting indirect addressing at this stage. Let the combiner create indirect addresses where appropriate. For now, generate the code so that the subexpressions useful to share are visible. But not if cse won't be done! */ else { if (! cse_not_expected && !REG_P (x)) x = break_out_memory_refs (x); /* At this point, any valid address is accepted. */ if (memory_address_addr_space_p (mode, x, as)) goto done; /* If it was valid before but breaking out memory refs invalidated it, use it the old way. */ if (memory_address_addr_space_p (mode, oldx, as)) { x = oldx; goto done; } /* Perform machine-dependent transformations on X in certain cases. This is not necessary since the code below can handle all possible cases, but machine-dependent transformations can make better code. */ { rtx orig_x = x; x = targetm.addr_space.legitimize_address (x, oldx, mode, as); if (orig_x != x && memory_address_addr_space_p (mode, x, as)) goto done; } /* PLUS and MULT can appear in special ways as the result of attempts to make an address usable for indexing. Usually they are dealt with by calling force_operand, below. But a sum containing constant terms is special if removing them makes the sum a valid address: then we generate that address in a register and index off of it. We do this because it often makes shorter code, and because the addresses thus generated in registers often become common subexpressions. */ if (GET_CODE (x) == PLUS) { rtx constant_term = const0_rtx; rtx y = eliminate_constant_term (x, &constant_term); if (constant_term == const0_rtx || ! memory_address_addr_space_p (mode, y, as)) x = force_operand (x, NULL_RTX); else { y = gen_rtx_PLUS (GET_MODE (x), copy_to_reg (y), constant_term); if (! memory_address_addr_space_p (mode, y, as)) x = force_operand (x, NULL_RTX); else x = y; } } else if (GET_CODE (x) == MULT || GET_CODE (x) == MINUS) x = force_operand (x, NULL_RTX); /* If we have a register that's an invalid address, it must be a hard reg of the wrong class. Copy it to a pseudo. */ else if (REG_P (x)) x = copy_to_reg (x); /* Last resort: copy the value to a register, since the register is a valid address. */ else x = force_reg (address_mode, x); } done: gcc_assert (memory_address_addr_space_p (mode, x, as)); /* If we didn't change the address, we are done. Otherwise, mark a reg as a pointer if we have REG or REG + CONST_INT. */ if (oldx == x) return x; else if (REG_P (x)) mark_reg_pointer (x, BITS_PER_UNIT); else if (GET_CODE (x) == PLUS && REG_P (XEXP (x, 0)) && CONST_INT_P (XEXP (x, 1))) mark_reg_pointer (XEXP (x, 0), BITS_PER_UNIT); /* OLDX may have been the address on a temporary. Update the address to indicate that X is now used. */ update_temp_slot_address (oldx, x); return x; } /* Convert a mem ref into one with a valid memory address. Pass through anything else unchanged. */ rtx validize_mem (rtx ref) { if (!MEM_P (ref)) return ref; ref = use_anchored_address (ref); if (memory_address_addr_space_p (GET_MODE (ref), XEXP (ref, 0), MEM_ADDR_SPACE (ref))) return ref; /* Don't alter REF itself, since that is probably a stack slot. */ return replace_equiv_address (ref, XEXP (ref, 0)); } /* If X is a memory reference to a member of an object block, try rewriting it to use an anchor instead. Return the new memory reference on success and the old one on failure. */ rtx use_anchored_address (rtx x) { rtx base; HOST_WIDE_INT offset; if (!flag_section_anchors) return x; if (!MEM_P (x)) return x; /* Split the address into a base and offset. */ base = XEXP (x, 0); offset = 0; if (GET_CODE (base) == CONST && GET_CODE (XEXP (base, 0)) == PLUS && CONST_INT_P (XEXP (XEXP (base, 0), 1))) { offset += INTVAL (XEXP (XEXP (base, 0), 1)); base = XEXP (XEXP (base, 0), 0); } /* Check whether BASE is suitable for anchors. */ if (GET_CODE (base) != SYMBOL_REF || !SYMBOL_REF_HAS_BLOCK_INFO_P (base) || SYMBOL_REF_ANCHOR_P (base) || SYMBOL_REF_BLOCK (base) == NULL || !targetm.use_anchors_for_symbol_p (base)) return x; /* Decide where BASE is going to be. */ place_block_symbol (base); /* Get the anchor we need to use. */ offset += SYMBOL_REF_BLOCK_OFFSET (base); base = get_section_anchor (SYMBOL_REF_BLOCK (base), offset, SYMBOL_REF_TLS_MODEL (base)); /* Work out the offset from the anchor. */ offset -= SYMBOL_REF_BLOCK_OFFSET (base); /* If we're going to run a CSE pass, force the anchor into a register. We will then be able to reuse registers for several accesses, if the target costs say that that's worthwhile. */ if (!cse_not_expected) base = force_reg (GET_MODE (base), base); return replace_equiv_address (x, plus_constant (base, offset)); } /* Copy the value or contents of X to a new temp reg and return that reg. */ rtx copy_to_reg (rtx x) { rtx temp = gen_reg_rtx (GET_MODE (x)); /* If not an operand, must be an address with PLUS and MULT so do the computation. */ if (! general_operand (x, VOIDmode)) x = force_operand (x, temp); if (x != temp) emit_move_insn (temp, x); return temp; } /* Like copy_to_reg but always give the new register mode Pmode in case X is a constant. */ rtx copy_addr_to_reg (rtx x) { return copy_to_mode_reg (Pmode, x); } /* Like copy_to_reg but always give the new register mode MODE in case X is a constant. */ rtx copy_to_mode_reg (enum machine_mode mode, rtx x) { rtx temp = gen_reg_rtx (mode); /* If not an operand, must be an address with PLUS and MULT so do the computation. */ if (! general_operand (x, VOIDmode)) x = force_operand (x, temp); gcc_assert (GET_MODE (x) == mode || GET_MODE (x) == VOIDmode); if (x != temp) emit_move_insn (temp, x); return temp; } /* Load X into a register if it is not already one. Use mode MODE for the register. X should be valid for mode MODE, but it may be a constant which is valid for all integer modes; that's why caller must specify MODE. The caller must not alter the value in the register we return, since we mark it as a "constant" register. */ rtx force_reg (enum machine_mode mode, rtx x) { rtx temp, insn, set; if (REG_P (x)) return x; if (general_operand (x, mode)) { temp = gen_reg_rtx (mode); insn = emit_move_insn (temp, x); } else { temp = force_operand (x, NULL_RTX); if (REG_P (temp)) insn = get_last_insn (); else { rtx temp2 = gen_reg_rtx (mode); insn = emit_move_insn (temp2, temp); temp = temp2; } } /* Let optimizers know that TEMP's value never changes and that X can be substituted for it. Don't get confused if INSN set something else (such as a SUBREG of TEMP). */ if (CONSTANT_P (x) && (set = single_set (insn)) != 0 && SET_DEST (set) == temp && ! rtx_equal_p (x, SET_SRC (set))) set_unique_reg_note (insn, REG_EQUAL, x); /* Let optimizers know that TEMP is a pointer, and if so, the known alignment of that pointer. */ { unsigned align = 0; if (GET_CODE (x) == SYMBOL_REF) { align = BITS_PER_UNIT; if (SYMBOL_REF_DECL (x) && DECL_P (SYMBOL_REF_DECL (x))) align = DECL_ALIGN (SYMBOL_REF_DECL (x)); } else if (GET_CODE (x) == LABEL_REF) align = BITS_PER_UNIT; else if (GET_CODE (x) == CONST && GET_CODE (XEXP (x, 0)) == PLUS && GET_CODE (XEXP (XEXP (x, 0), 0)) == SYMBOL_REF && CONST_INT_P (XEXP (XEXP (x, 0), 1))) { rtx s = XEXP (XEXP (x, 0), 0); rtx c = XEXP (XEXP (x, 0), 1); unsigned sa, ca; sa = BITS_PER_UNIT; if (SYMBOL_REF_DECL (s) && DECL_P (SYMBOL_REF_DECL (s))) sa = DECL_ALIGN (SYMBOL_REF_DECL (s)); if (INTVAL (c) == 0) align = sa; else { ca = ctz_hwi (INTVAL (c)) * BITS_PER_UNIT; align = MIN (sa, ca); } } if (align || (MEM_P (x) && MEM_POINTER (x))) mark_reg_pointer (temp, align); } return temp; } /* If X is a memory ref, copy its contents to a new temp reg and return that reg. Otherwise, return X. */ rtx force_not_mem (rtx x) { rtx temp; if (!MEM_P (x) || GET_MODE (x) == BLKmode) return x; temp = gen_reg_rtx (GET_MODE (x)); if (MEM_POINTER (x)) REG_POINTER (temp) = 1; emit_move_insn (temp, x); return temp; } /* Copy X to TARGET (if it's nonzero and a reg) or to a new temp reg and return that reg. MODE is the mode to use for X in case it is a constant. */ rtx copy_to_suggested_reg (rtx x, rtx target, enum machine_mode mode) { rtx temp; if (target && REG_P (target)) temp = target; else temp = gen_reg_rtx (mode); emit_move_insn (temp, x); return temp; } /* Return the mode to use to pass or return a scalar of TYPE and MODE. PUNSIGNEDP points to the signedness of the type and may be adjusted to show what signedness to use on extension operations. FOR_RETURN is nonzero if the caller is promoting the return value of FNDECL, else it is for promoting args. */ enum machine_mode promote_function_mode (const_tree type, enum machine_mode mode, int *punsignedp, const_tree funtype, int for_return) { /* Called without a type node for a libcall. */ if (type == NULL_TREE) { if (INTEGRAL_MODE_P (mode)) return targetm.calls.promote_function_mode (NULL_TREE, mode, punsignedp, funtype, for_return); else return mode; } switch (TREE_CODE (type)) { case INTEGER_TYPE: case ENUMERAL_TYPE: case BOOLEAN_TYPE: case REAL_TYPE: case OFFSET_TYPE: case FIXED_POINT_TYPE: case POINTER_TYPE: case REFERENCE_TYPE: return targetm.calls.promote_function_mode (type, mode, punsignedp, funtype, for_return); default: return mode; } } /* Return the mode to use to store a scalar of TYPE and MODE. PUNSIGNEDP points to the signedness of the type and may be adjusted to show what signedness to use on extension operations. */ enum machine_mode promote_mode (const_tree type ATTRIBUTE_UNUSED, enum machine_mode mode, int *punsignedp ATTRIBUTE_UNUSED) { #ifdef PROMOTE_MODE enum tree_code code; int unsignedp; #endif /* For libcalls this is invoked without TYPE from the backends TARGET_PROMOTE_FUNCTION_MODE hooks. Don't do anything in that case. */ if (type == NULL_TREE) return mode; /* FIXME: this is the same logic that was there until GCC 4.4, but we probably want to test POINTERS_EXTEND_UNSIGNED even if PROMOTE_MODE is not defined. The affected targets are M32C, S390, SPARC. */ #ifdef PROMOTE_MODE code = TREE_CODE (type); unsignedp = *punsignedp; switch (code) { case INTEGER_TYPE: case ENUMERAL_TYPE: case BOOLEAN_TYPE: case REAL_TYPE: case OFFSET_TYPE: case FIXED_POINT_TYPE: PROMOTE_MODE (mode, unsignedp, type); *punsignedp = unsignedp; return mode; break; #ifdef POINTERS_EXTEND_UNSIGNED case REFERENCE_TYPE: case POINTER_TYPE: *punsignedp = POINTERS_EXTEND_UNSIGNED; return targetm.addr_space.address_mode (TYPE_ADDR_SPACE (TREE_TYPE (type))); break; #endif default: return mode; } #else return mode; #endif } /* Use one of promote_mode or promote_function_mode to find the promoted mode of DECL. If PUNSIGNEDP is not NULL, store there the unsignedness of DECL after promotion. */ enum machine_mode promote_decl_mode (const_tree decl, int *punsignedp) { tree type = TREE_TYPE (decl); int unsignedp = TYPE_UNSIGNED (type); enum machine_mode mode = DECL_MODE (decl); enum machine_mode pmode; if (TREE_CODE (decl) == RESULT_DECL || TREE_CODE (decl) == PARM_DECL) pmode = promote_function_mode (type, mode, &unsignedp, TREE_TYPE (current_function_decl), 2); else pmode = promote_mode (type, mode, &unsignedp); if (punsignedp) *punsignedp = unsignedp; return pmode; } /* Controls the behaviour of {anti_,}adjust_stack. */ static bool suppress_reg_args_size; /* A helper for adjust_stack and anti_adjust_stack. */ static void adjust_stack_1 (rtx adjust, bool anti_p) { rtx temp, insn; #ifndef STACK_GROWS_DOWNWARD /* Hereafter anti_p means subtract_p. */ anti_p = !anti_p; #endif temp = expand_binop (Pmode, anti_p ? sub_optab : add_optab, stack_pointer_rtx, adjust, stack_pointer_rtx, 0, OPTAB_LIB_WIDEN); if (temp != stack_pointer_rtx) insn = emit_move_insn (stack_pointer_rtx, temp); else { insn = get_last_insn (); temp = single_set (insn); gcc_assert (temp != NULL && SET_DEST (temp) == stack_pointer_rtx); } if (!suppress_reg_args_size) add_reg_note (insn, REG_ARGS_SIZE, GEN_INT (stack_pointer_delta)); } /* Adjust the stack pointer by ADJUST (an rtx for a number of bytes). This pops when ADJUST is positive. ADJUST need not be constant. */ void adjust_stack (rtx adjust) { if (adjust == const0_rtx) return; /* We expect all variable sized adjustments to be multiple of PREFERRED_STACK_BOUNDARY. */ if (CONST_INT_P (adjust)) stack_pointer_delta -= INTVAL (adjust); adjust_stack_1 (adjust, false); } /* Adjust the stack pointer by minus ADJUST (an rtx for a number of bytes). This pushes when ADJUST is positive. ADJUST need not be constant. */ void anti_adjust_stack (rtx adjust) { if (adjust == const0_rtx) return; /* We expect all variable sized adjustments to be multiple of PREFERRED_STACK_BOUNDARY. */ if (CONST_INT_P (adjust)) stack_pointer_delta += INTVAL (adjust); adjust_stack_1 (adjust, true); } /* Round the size of a block to be pushed up to the boundary required by this machine. SIZE is the desired size, which need not be constant. */ static rtx round_push (rtx size) { rtx align_rtx, alignm1_rtx; if (!SUPPORTS_STACK_ALIGNMENT || crtl->preferred_stack_boundary == MAX_SUPPORTED_STACK_ALIGNMENT) { int align = crtl->preferred_stack_boundary / BITS_PER_UNIT; if (align == 1) return size; if (CONST_INT_P (size)) { HOST_WIDE_INT new_size = (INTVAL (size) + align - 1) / align * align; if (INTVAL (size) != new_size) size = GEN_INT (new_size); return size; } align_rtx = GEN_INT (align); alignm1_rtx = GEN_INT (align - 1); } else { /* If crtl->preferred_stack_boundary might still grow, use virtual_preferred_stack_boundary_rtx instead. This will be substituted by the right value in vregs pass and optimized during combine. */ align_rtx = virtual_preferred_stack_boundary_rtx; alignm1_rtx = force_operand (plus_constant (align_rtx, -1), NULL_RTX); } /* CEIL_DIV_EXPR needs to worry about the addition overflowing, but we know it can't. So add ourselves and then do TRUNC_DIV_EXPR. */ size = expand_binop (Pmode, add_optab, size, alignm1_rtx, NULL_RTX, 1, OPTAB_LIB_WIDEN); size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, size, align_rtx, NULL_RTX, 1); size = expand_mult (Pmode, size, align_rtx, NULL_RTX, 1); return size; } /* Save the stack pointer for the purpose in SAVE_LEVEL. PSAVE is a pointer to a previously-created save area. If no save area has been allocated, this function will allocate one. If a save area is specified, it must be of the proper mode. */ void emit_stack_save (enum save_level save_level, rtx *psave) { rtx sa = *psave; /* The default is that we use a move insn and save in a Pmode object. */ rtx (*fcn) (rtx, rtx) = gen_move_insn; enum machine_mode mode = STACK_SAVEAREA_MODE (save_level); /* See if this machine has anything special to do for this kind of save. */ switch (save_level) { #ifdef HAVE_save_stack_block case SAVE_BLOCK: if (HAVE_save_stack_block) fcn = gen_save_stack_block; break; #endif #ifdef HAVE_save_stack_function case SAVE_FUNCTION: if (HAVE_save_stack_function) fcn = gen_save_stack_function; break; #endif #ifdef HAVE_save_stack_nonlocal case SAVE_NONLOCAL: if (HAVE_save_stack_nonlocal) fcn = gen_save_stack_nonlocal; break; #endif default: break; } /* If there is no save area and we have to allocate one, do so. Otherwise verify the save area is the proper mode. */ if (sa == 0) { if (mode != VOIDmode) { if (save_level == SAVE_NONLOCAL) *psave = sa = assign_stack_local (mode, GET_MODE_SIZE (mode), 0); else *psave = sa = gen_reg_rtx (mode); } } do_pending_stack_adjust (); if (sa != 0) sa = validize_mem (sa); emit_insn (fcn (sa, stack_pointer_rtx)); } /* Restore the stack pointer for the purpose in SAVE_LEVEL. SA is the save area made by emit_stack_save. If it is zero, we have nothing to do. */ void emit_stack_restore (enum save_level save_level, rtx sa) { /* The default is that we use a move insn. */ rtx (*fcn) (rtx, rtx) = gen_move_insn; /* If stack_realign_drap, the x86 backend emits a prologue that aligns both STACK_POINTER and HARD_FRAME_POINTER. If stack_realign_fp, the x86 backend emits a prologue that aligns only STACK_POINTER. This renders the HARD_FRAME_POINTER unusable for accessing aligned variables, which is reflected in ix86_can_eliminate. We normally still have the realigned STACK_POINTER that we can use. But if there is a stack restore still present at reload, it can trigger mark_not_eliminable for the STACK_POINTER, leaving no way to eliminate FRAME_POINTER into a hard reg. To prevent this situation, we force need_drap if we emit a stack restore. */ if (SUPPORTS_STACK_ALIGNMENT) crtl->need_drap = true; /* See if this machine has anything special to do for this kind of save. */ switch (save_level) { #ifdef HAVE_restore_stack_block case SAVE_BLOCK: if (HAVE_restore_stack_block) fcn = gen_restore_stack_block; break; #endif #ifdef HAVE_restore_stack_function case SAVE_FUNCTION: if (HAVE_restore_stack_function) fcn = gen_restore_stack_function; break; #endif #ifdef HAVE_restore_stack_nonlocal case SAVE_NONLOCAL: if (HAVE_restore_stack_nonlocal) fcn = gen_restore_stack_nonlocal; break; #endif default: break; } if (sa != 0) { sa = validize_mem (sa); /* These clobbers prevent the scheduler from moving references to variable arrays below the code that deletes (pops) the arrays. */ emit_clobber (gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (VOIDmode))); emit_clobber (gen_rtx_MEM (BLKmode, stack_pointer_rtx)); } discard_pending_stack_adjust (); emit_insn (fcn (stack_pointer_rtx, sa)); } /* Invoke emit_stack_save on the nonlocal_goto_save_area for the current function. This function should be called whenever we allocate or deallocate dynamic stack space. */ void update_nonlocal_goto_save_area (void) { tree t_save; rtx r_save; /* The nonlocal_goto_save_area object is an array of N pointers. The first one is used for the frame pointer save; the rest are sized by STACK_SAVEAREA_MODE. Create a reference to array index 1, the first of the stack save area slots. */ t_save = build4 (ARRAY_REF, TREE_TYPE (TREE_TYPE (cfun->nonlocal_goto_save_area)), cfun->nonlocal_goto_save_area, integer_one_node, NULL_TREE, NULL_TREE); r_save = expand_expr (t_save, NULL_RTX, VOIDmode, EXPAND_WRITE); emit_stack_save (SAVE_NONLOCAL, &r_save); } /* Return an rtx representing the address of an area of memory dynamically pushed on the stack. Any required stack pointer alignment is preserved. SIZE is an rtx representing the size of the area. SIZE_ALIGN is the alignment (in bits) that we know SIZE has. This parameter may be zero. If so, a proper value will be extracted from SIZE if it is constant, otherwise BITS_PER_UNIT will be assumed. REQUIRED_ALIGN is the alignment (in bits) required for the region of memory. If CANNOT_ACCUMULATE is set to TRUE, the caller guarantees that the stack space allocated by the generated code cannot be added with itself in the course of the execution of the function. It is always safe to pass FALSE here and the following criterion is sufficient in order to pass TRUE: every path in the CFG that starts at the allocation point and loops to it executes the associated deallocation code. */ rtx allocate_dynamic_stack_space (rtx size, unsigned size_align, unsigned required_align, bool cannot_accumulate) { HOST_WIDE_INT stack_usage_size = -1; rtx final_label, final_target, target; unsigned extra_align = 0; bool must_align; /* If we're asking for zero bytes, it doesn't matter what we point to since we can't dereference it. But return a reasonable address anyway. */ if (size == const0_rtx) return virtual_stack_dynamic_rtx; /* Otherwise, show we're calling alloca or equivalent. */ cfun->calls_alloca = 1; /* If stack usage info is requested, look into the size we are passed. We need to do so this early to avoid the obfuscation that may be introduced later by the various alignment operations. */ if (flag_stack_usage_info) { if (CONST_INT_P (size)) stack_usage_size = INTVAL (size); else if (REG_P (size)) { /* Look into the last emitted insn and see if we can deduce something for the register. */ rtx insn, set, note; insn = get_last_insn (); if ((set = single_set (insn)) && rtx_equal_p (SET_DEST (set), size)) { if (CONST_INT_P (SET_SRC (set))) stack_usage_size = INTVAL (SET_SRC (set)); else if ((note = find_reg_equal_equiv_note (insn)) && CONST_INT_P (XEXP (note, 0))) stack_usage_size = INTVAL (XEXP (note, 0)); } } /* If the size is not constant, we can't say anything. */ if (stack_usage_size == -1) { current_function_has_unbounded_dynamic_stack_size = 1; stack_usage_size = 0; } } /* Ensure the size is in the proper mode. */ if (GET_MODE (size) != VOIDmode && GET_MODE (size) != Pmode) size = convert_to_mode (Pmode, size, 1); /* Adjust SIZE_ALIGN, if needed. */ if (CONST_INT_P (size)) { unsigned HOST_WIDE_INT lsb; lsb = INTVAL (size); lsb &= -lsb; /* Watch out for overflow truncating to "unsigned". */ if (lsb > UINT_MAX / BITS_PER_UNIT) size_align = 1u << (HOST_BITS_PER_INT - 1); else size_align = (unsigned)lsb * BITS_PER_UNIT; } else if (size_align < BITS_PER_UNIT) size_align = BITS_PER_UNIT; /* We can't attempt to minimize alignment necessary, because we don't know the final value of preferred_stack_boundary yet while executing this code. */ if (crtl->preferred_stack_boundary < PREFERRED_STACK_BOUNDARY) crtl->preferred_stack_boundary = PREFERRED_STACK_BOUNDARY; /* We will need to ensure that the address we return is aligned to REQUIRED_ALIGN. If STACK_DYNAMIC_OFFSET is defined, we don't always know its final value at this point in the compilation (it might depend on the size of the outgoing parameter lists, for example), so we must align the value to be returned in that case. (Note that STACK_DYNAMIC_OFFSET will have a default nonzero value if STACK_POINTER_OFFSET or ACCUMULATE_OUTGOING_ARGS are defined). We must also do an alignment operation on the returned value if the stack pointer alignment is less strict than REQUIRED_ALIGN. If we have to align, we must leave space in SIZE for the hole that might result from the alignment operation. */ must_align = (crtl->preferred_stack_boundary < required_align); if (must_align) { if (required_align > PREFERRED_STACK_BOUNDARY) extra_align = PREFERRED_STACK_BOUNDARY; else if (required_align > STACK_BOUNDARY) extra_align = STACK_BOUNDARY; else extra_align = BITS_PER_UNIT; } /* ??? STACK_POINTER_OFFSET is always defined now. */ #if defined (STACK_DYNAMIC_OFFSET) || defined (STACK_POINTER_OFFSET) must_align = true; extra_align = BITS_PER_UNIT; #endif if (must_align) { unsigned extra = (required_align - extra_align) / BITS_PER_UNIT; size = plus_constant (size, extra); size = force_operand (size, NULL_RTX); if (flag_stack_usage_info) stack_usage_size += extra; if (extra && size_align > extra_align) size_align = extra_align; } /* Round the size to a multiple of the required stack alignment. Since the stack if presumed to be rounded before this allocation, this will maintain the required alignment. If the stack grows downward, we could save an insn by subtracting SIZE from the stack pointer and then aligning the stack pointer. The problem with this is that the stack pointer may be unaligned between the execution of the subtraction and alignment insns and some machines do not allow this. Even on those that do, some signal handlers malfunction if a signal should occur between those insns. Since this is an extremely rare event, we have no reliable way of knowing which systems have this problem. So we avoid even momentarily mis-aligning the stack. */ if (size_align % MAX_SUPPORTED_STACK_ALIGNMENT != 0) { size = round_push (size); if (flag_stack_usage_info) { int align = crtl->preferred_stack_boundary / BITS_PER_UNIT; stack_usage_size = (stack_usage_size + align - 1) / align * align; } } target = gen_reg_rtx (Pmode); /* The size is supposed to be fully adjusted at this point so record it if stack usage info is requested. */ if (flag_stack_usage_info) { current_function_dynamic_stack_size += stack_usage_size; /* ??? This is gross but the only safe stance in the absence of stack usage oriented flow analysis. */ if (!cannot_accumulate) current_function_has_unbounded_dynamic_stack_size = 1; } final_label = NULL_RTX; final_target = NULL_RTX; /* If we are splitting the stack, we need to ask the backend whether there is enough room on the current stack. If there isn't, or if the backend doesn't know how to tell is, then we need to call a function to allocate memory in some other way. This memory will be released when we release the current stack segment. The effect is that stack allocation becomes less efficient, but at least it doesn't cause a stack overflow. */ if (flag_split_stack) { rtx available_label, ask, space, func; available_label = NULL_RTX; #ifdef HAVE_split_stack_space_check if (HAVE_split_stack_space_check) { available_label = gen_label_rtx (); /* This instruction will branch to AVAILABLE_LABEL if there are SIZE bytes available on the stack. */ emit_insn (gen_split_stack_space_check (size, available_label)); } #endif /* The __morestack_allocate_stack_space function will allocate memory using malloc. If the alignment of the memory returned by malloc does not meet REQUIRED_ALIGN, we increase SIZE to make sure we allocate enough space. */ if (MALLOC_ABI_ALIGNMENT >= required_align) ask = size; else { ask = expand_binop (Pmode, add_optab, size, GEN_INT (required_align / BITS_PER_UNIT - 1), NULL_RTX, 1, OPTAB_LIB_WIDEN); must_align = true; } func = init_one_libfunc ("__morestack_allocate_stack_space"); space = emit_library_call_value (func, target, LCT_NORMAL, Pmode, 1, ask, Pmode); if (available_label == NULL_RTX) return space; final_target = gen_reg_rtx (Pmode); emit_move_insn (final_target, space); final_label = gen_label_rtx (); emit_jump (final_label); emit_label (available_label); } do_pending_stack_adjust (); /* We ought to be called always on the toplevel and stack ought to be aligned properly. */ gcc_assert (!(stack_pointer_delta % (PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT))); /* If needed, check that we have the required amount of stack. Take into account what has already been checked. */ if (STACK_CHECK_MOVING_SP) ; else if (flag_stack_check == GENERIC_STACK_CHECK) probe_stack_range (STACK_OLD_CHECK_PROTECT + STACK_CHECK_MAX_FRAME_SIZE, size); else if (flag_stack_check == STATIC_BUILTIN_STACK_CHECK) probe_stack_range (STACK_CHECK_PROTECT, size); /* Don't let anti_adjust_stack emit notes. */ suppress_reg_args_size = true; /* Perform the required allocation from the stack. Some systems do this differently than simply incrementing/decrementing from the stack pointer, such as acquiring the space by calling malloc(). */ #ifdef HAVE_allocate_stack if (HAVE_allocate_stack) { struct expand_operand ops[2]; /* We don't have to check against the predicate for operand 0 since TARGET is known to be a pseudo of the proper mode, which must be valid for the operand. */ create_fixed_operand (&ops[0], target); create_convert_operand_to (&ops[1], size, STACK_SIZE_MODE, true); expand_insn (CODE_FOR_allocate_stack, 2, ops); } else #endif { int saved_stack_pointer_delta; #ifndef STACK_GROWS_DOWNWARD emit_move_insn (target, virtual_stack_dynamic_rtx); #endif /* Check stack bounds if necessary. */ if (crtl->limit_stack) { rtx available; rtx space_available = gen_label_rtx (); #ifdef STACK_GROWS_DOWNWARD available = expand_binop (Pmode, sub_optab, stack_pointer_rtx, stack_limit_rtx, NULL_RTX, 1, OPTAB_WIDEN); #else available = expand_binop (Pmode, sub_optab, stack_limit_rtx, stack_pointer_rtx, NULL_RTX, 1, OPTAB_WIDEN); #endif emit_cmp_and_jump_insns (available, size, GEU, NULL_RTX, Pmode, 1, space_available); #ifdef HAVE_trap if (HAVE_trap) emit_insn (gen_trap ()); else #endif error ("stack limits not supported on this target"); emit_barrier (); emit_label (space_available); } saved_stack_pointer_delta = stack_pointer_delta; if (flag_stack_check && STACK_CHECK_MOVING_SP) anti_adjust_stack_and_probe (size, false); else anti_adjust_stack (size); /* Even if size is constant, don't modify stack_pointer_delta. The constant size alloca should preserve crtl->preferred_stack_boundary alignment. */ stack_pointer_delta = saved_stack_pointer_delta; #ifdef STACK_GROWS_DOWNWARD emit_move_insn (target, virtual_stack_dynamic_rtx); #endif } suppress_reg_args_size = false; /* Finish up the split stack handling. */ if (final_label != NULL_RTX) { gcc_assert (flag_split_stack); emit_move_insn (final_target, target); emit_label (final_label); target = final_target; } if (must_align) { /* CEIL_DIV_EXPR needs to worry about the addition overflowing, but we know it can't. So add ourselves and then do TRUNC_DIV_EXPR. */ target = expand_binop (Pmode, add_optab, target, GEN_INT (required_align / BITS_PER_UNIT - 1), NULL_RTX, 1, OPTAB_LIB_WIDEN); target = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, target, GEN_INT (required_align / BITS_PER_UNIT), NULL_RTX, 1); target = expand_mult (Pmode, target, GEN_INT (required_align / BITS_PER_UNIT), NULL_RTX, 1); } /* Now that we've committed to a return value, mark its alignment. */ mark_reg_pointer (target, required_align); /* Record the new stack level for nonlocal gotos. */ if (cfun->nonlocal_goto_save_area != 0) update_nonlocal_goto_save_area (); return target; } /* A front end may want to override GCC's stack checking by providing a run-time routine to call to check the stack, so provide a mechanism for calling that routine. */ static GTY(()) rtx stack_check_libfunc; void set_stack_check_libfunc (const char *libfunc_name) { gcc_assert (stack_check_libfunc == NULL_RTX); stack_check_libfunc = gen_rtx_SYMBOL_REF (Pmode, libfunc_name); } /* Emit one stack probe at ADDRESS, an address within the stack. */ void emit_stack_probe (rtx address) { rtx memref = gen_rtx_MEM (word_mode, address); MEM_VOLATILE_P (memref) = 1; /* See if we have an insn to probe the stack. */ #ifdef HAVE_probe_stack if (HAVE_probe_stack) emit_insn (gen_probe_stack (memref)); else #endif emit_move_insn (memref, const0_rtx); } /* Probe a range of stack addresses from FIRST to FIRST+SIZE, inclusive. FIRST is a constant and size is a Pmode RTX. These are offsets from the current stack pointer. STACK_GROWS_DOWNWARD says whether to add or subtract them from the stack pointer. */ #define PROBE_INTERVAL (1 << STACK_CHECK_PROBE_INTERVAL_EXP) #ifdef STACK_GROWS_DOWNWARD #define STACK_GROW_OP MINUS #define STACK_GROW_OPTAB sub_optab #define STACK_GROW_OFF(off) -(off) #else #define STACK_GROW_OP PLUS #define STACK_GROW_OPTAB add_optab #define STACK_GROW_OFF(off) (off) #endif void probe_stack_range (HOST_WIDE_INT first, rtx size) { /* First ensure SIZE is Pmode. */ if (GET_MODE (size) != VOIDmode && GET_MODE (size) != Pmode) size = convert_to_mode (Pmode, size, 1); /* Next see if we have a function to check the stack. */ if (stack_check_libfunc) { rtx addr = memory_address (Pmode, gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, stack_pointer_rtx, plus_constant (size, first))); emit_library_call (stack_check_libfunc, LCT_NORMAL, VOIDmode, 1, addr, Pmode); return; } /* Next see if we have an insn to check the stack. */ #ifdef HAVE_check_stack if (HAVE_check_stack) { struct expand_operand ops[1]; rtx addr = memory_address (Pmode, gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, stack_pointer_rtx, plus_constant (size, first))); create_input_operand (&ops[0], addr, Pmode); if (maybe_expand_insn (CODE_FOR_check_stack, 1, ops)) return; } #endif /* Otherwise we have to generate explicit probes. If we have a constant small number of them to generate, that's the easy case. */ else if (CONST_INT_P (size) && INTVAL (size) < 7 * PROBE_INTERVAL) { HOST_WIDE_INT isize = INTVAL (size), i; rtx addr; /* Probe at FIRST + N * PROBE_INTERVAL for values of N from 1 until it exceeds SIZE. If only one probe is needed, this will not generate any code. Then probe at FIRST + SIZE. */ for (i = PROBE_INTERVAL; i < isize; i += PROBE_INTERVAL) { addr = memory_address (Pmode, plus_constant (stack_pointer_rtx, STACK_GROW_OFF (first + i))); emit_stack_probe (addr); } addr = memory_address (Pmode, plus_constant (stack_pointer_rtx, STACK_GROW_OFF (first + isize))); emit_stack_probe (addr); } /* In the variable case, do the same as above, but in a loop. Note that we must be extra careful with variables wrapping around because we might be at the very top (or the very bottom) of the address space and we have to be able to handle this case properly; in particular, we use an equality test for the loop condition. */ else { rtx rounded_size, rounded_size_op, test_addr, last_addr, temp; rtx loop_lab = gen_label_rtx (); rtx end_lab = gen_label_rtx (); /* Step 1: round SIZE to the previous multiple of the interval. */ /* ROUNDED_SIZE = SIZE & -PROBE_INTERVAL */ rounded_size = simplify_gen_binary (AND, Pmode, size, GEN_INT (-PROBE_INTERVAL)); rounded_size_op = force_operand (rounded_size, NULL_RTX); /* Step 2: compute initial and final value of the loop counter. */ /* TEST_ADDR = SP + FIRST. */ test_addr = force_operand (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, stack_pointer_rtx, GEN_INT (first)), NULL_RTX); /* LAST_ADDR = SP + FIRST + ROUNDED_SIZE. */ last_addr = force_operand (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, test_addr, rounded_size_op), NULL_RTX); /* Step 3: the loop while (TEST_ADDR != LAST_ADDR) { TEST_ADDR = TEST_ADDR + PROBE_INTERVAL probe at TEST_ADDR } probes at FIRST + N * PROBE_INTERVAL for values of N from 1 until it is equal to ROUNDED_SIZE. */ emit_label (loop_lab); /* Jump to END_LAB if TEST_ADDR == LAST_ADDR. */ emit_cmp_and_jump_insns (test_addr, last_addr, EQ, NULL_RTX, Pmode, 1, end_lab); /* TEST_ADDR = TEST_ADDR + PROBE_INTERVAL. */ temp = expand_binop (Pmode, STACK_GROW_OPTAB, test_addr, GEN_INT (PROBE_INTERVAL), test_addr, 1, OPTAB_WIDEN); gcc_assert (temp == test_addr); /* Probe at TEST_ADDR. */ emit_stack_probe (test_addr); emit_jump (loop_lab); emit_label (end_lab); /* Step 4: probe at FIRST + SIZE if we cannot assert at compile-time that SIZE is equal to ROUNDED_SIZE. */ /* TEMP = SIZE - ROUNDED_SIZE. */ temp = simplify_gen_binary (MINUS, Pmode, size, rounded_size); if (temp != const0_rtx) { rtx addr; if (CONST_INT_P (temp)) { /* Use [base + disp} addressing mode if supported. */ HOST_WIDE_INT offset = INTVAL (temp); addr = memory_address (Pmode, plus_constant (last_addr, STACK_GROW_OFF (offset))); } else { /* Manual CSE if the difference is not known at compile-time. */ temp = gen_rtx_MINUS (Pmode, size, rounded_size_op); addr = memory_address (Pmode, gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, last_addr, temp)); } emit_stack_probe (addr); } } } /* Adjust the stack pointer by minus SIZE (an rtx for a number of bytes) while probing it. This pushes when SIZE is positive. SIZE need not be constant. If ADJUST_BACK is true, adjust back the stack pointer by plus SIZE at the end. */ void anti_adjust_stack_and_probe (rtx size, bool adjust_back) { /* We skip the probe for the first interval + a small dope of 4 words and probe that many bytes past the specified size to maintain a protection area at the botton of the stack. */ const int dope = 4 * UNITS_PER_WORD; /* First ensure SIZE is Pmode. */ if (GET_MODE (size) != VOIDmode && GET_MODE (size) != Pmode) size = convert_to_mode (Pmode, size, 1); /* If we have a constant small number of probes to generate, that's the easy case. */ if (CONST_INT_P (size) && INTVAL (size) < 7 * PROBE_INTERVAL) { HOST_WIDE_INT isize = INTVAL (size), i; bool first_probe = true; /* Adjust SP and probe at PROBE_INTERVAL + N * PROBE_INTERVAL for values of N from 1 until it exceeds SIZE. If only one probe is needed, this will not generate any code. Then adjust and probe to PROBE_INTERVAL + SIZE. */ for (i = PROBE_INTERVAL; i < isize; i += PROBE_INTERVAL) { if (first_probe) { anti_adjust_stack (GEN_INT (2 * PROBE_INTERVAL + dope)); first_probe = false; } else anti_adjust_stack (GEN_INT (PROBE_INTERVAL)); emit_stack_probe (stack_pointer_rtx); } if (first_probe) anti_adjust_stack (plus_constant (size, PROBE_INTERVAL + dope)); else anti_adjust_stack (plus_constant (size, PROBE_INTERVAL - i)); emit_stack_probe (stack_pointer_rtx); } /* In the variable case, do the same as above, but in a loop. Note that we must be extra careful with variables wrapping around because we might be at the very top (or the very bottom) of the address space and we have to be able to handle this case properly; in particular, we use an equality test for the loop condition. */ else { rtx rounded_size, rounded_size_op, last_addr, temp; rtx loop_lab = gen_label_rtx (); rtx end_lab = gen_label_rtx (); /* Step 1: round SIZE to the previous multiple of the interval. */ /* ROUNDED_SIZE = SIZE & -PROBE_INTERVAL */ rounded_size = simplify_gen_binary (AND, Pmode, size, GEN_INT (-PROBE_INTERVAL)); rounded_size_op = force_operand (rounded_size, NULL_RTX); /* Step 2: compute initial and final value of the loop counter. */ /* SP = SP_0 + PROBE_INTERVAL. */ anti_adjust_stack (GEN_INT (PROBE_INTERVAL + dope)); /* LAST_ADDR = SP_0 + PROBE_INTERVAL + ROUNDED_SIZE. */ last_addr = force_operand (gen_rtx_fmt_ee (STACK_GROW_OP, Pmode, stack_pointer_rtx, rounded_size_op), NULL_RTX); /* Step 3: the loop while (SP != LAST_ADDR) { SP = SP + PROBE_INTERVAL probe at SP } adjusts SP and probes at PROBE_INTERVAL + N * PROBE_INTERVAL for values of N from 1 until it is equal to ROUNDED_SIZE. */ emit_label (loop_lab); /* Jump to END_LAB if SP == LAST_ADDR. */ emit_cmp_and_jump_insns (stack_pointer_rtx, last_addr, EQ, NULL_RTX, Pmode, 1, end_lab); /* SP = SP + PROBE_INTERVAL and probe at SP. */ anti_adjust_stack (GEN_INT (PROBE_INTERVAL)); emit_stack_probe (stack_pointer_rtx); emit_jump (loop_lab); emit_label (end_lab); /* Step 4: adjust SP and probe at PROBE_INTERVAL + SIZE if we cannot assert at compile-time that SIZE is equal to ROUNDED_SIZE. */ /* TEMP = SIZE - ROUNDED_SIZE. */ temp = simplify_gen_binary (MINUS, Pmode, size, rounded_size); if (temp != const0_rtx) { /* Manual CSE if the difference is not known at compile-time. */ if (GET_CODE (temp) != CONST_INT) temp = gen_rtx_MINUS (Pmode, size, rounded_size_op); anti_adjust_stack (temp); emit_stack_probe (stack_pointer_rtx); } } /* Adjust back and account for the additional first interval. */ if (adjust_back) adjust_stack (plus_constant (size, PROBE_INTERVAL + dope)); else adjust_stack (GEN_INT (PROBE_INTERVAL + dope)); } /* Return an rtx representing the register or memory location in which a scalar value of data type VALTYPE was returned by a function call to function FUNC. FUNC is a FUNCTION_DECL, FNTYPE a FUNCTION_TYPE node if the precise function is known, otherwise 0. OUTGOING is 1 if on a machine with register windows this function should return the register in which the function will put its result and 0 otherwise. */ rtx hard_function_value (const_tree valtype, const_tree func, const_tree fntype, int outgoing ATTRIBUTE_UNUSED) { rtx val; val = targetm.calls.function_value (valtype, func ? func : fntype, outgoing); if (REG_P (val) && GET_MODE (val) == BLKmode) { unsigned HOST_WIDE_INT bytes = int_size_in_bytes (valtype); enum machine_mode tmpmode; /* int_size_in_bytes can return -1. We don't need a check here since the value of bytes will then be large enough that no mode will match anyway. */ for (tmpmode = GET_CLASS_NARROWEST_MODE (MODE_INT); tmpmode != VOIDmode; tmpmode = GET_MODE_WIDER_MODE (tmpmode)) { /* Have we found a large enough mode? */ if (GET_MODE_SIZE (tmpmode) >= bytes) break; } /* No suitable mode found. */ gcc_assert (tmpmode != VOIDmode); PUT_MODE (val, tmpmode); } return val; } /* Return an rtx representing the register or memory location in which a scalar value of mode MODE was returned by a library call. */ rtx hard_libcall_value (enum machine_mode mode, rtx fun) { return targetm.calls.libcall_value (mode, fun); } /* Look up the tree code for a given rtx code to provide the arithmetic operation for REAL_ARITHMETIC. The function returns an int because the caller may not know what `enum tree_code' means. */ int rtx_to_tree_code (enum rtx_code code) { enum tree_code tcode; switch (code) { case PLUS: tcode = PLUS_EXPR; break; case MINUS: tcode = MINUS_EXPR; break; case MULT: tcode = MULT_EXPR; break; case DIV: tcode = RDIV_EXPR; break; case SMIN: tcode = MIN_EXPR; break; case SMAX: tcode = MAX_EXPR; break; default: tcode = LAST_AND_UNUSED_TREE_CODE; break; } return ((int) tcode); } #include "gt-explow.h"
Go to most recent revision | Compare with Previous | Blame | View Log