URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [gnu-dev/] [or1k-gcc/] [gcc/] [genopinit.c] - Rev 848
Go to most recent revision | Compare with Previous | Blame | View Log
/* Generate code to initialize optabs from machine description. Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2010, 2011 Free Software Foundation, Inc. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */ #include "bconfig.h" #include "system.h" #include "coretypes.h" #include "tm.h" #include "rtl.h" #include "errors.h" #include "gensupport.h" /* Many parts of GCC use arrays that are indexed by machine mode and contain the insn codes for pattern in the MD file that perform a given operation on operands of that mode. These patterns are present in the MD file with names that contain the mode(s) used and the name of the operation. This program writes a function `init_all_optabs' that initializes the optabs with all the insn codes of the relevant patterns present in the MD file. This array contains a list of optabs that need to be initialized. Within each string, the name of the pattern to be matched against is delimited with $( and $). In the string, $a and $b are used to match a short mode name (the part of the mode name not including `mode' and converted to lower-case). When writing out the initializer, the entire string is used. $A and $B are replaced with the full name of the mode; $a and $b are replaced with the short form of the name, as above. If $N is present in the pattern, it means the two modes must be in the same mode class, and $b must be greater than $a (e.g, QImode and HImode). $I means that only full integer modes should be considered for the next mode, and $F means that only float modes should be considered. $P means that both full and partial integer modes should be considered. $Q means that only fixed-point modes should be considered. $V means to emit 'v' if the first mode is a MODE_FLOAT mode. For some optabs, we store the operation by RTL codes. These are only used for comparisons. In that case, $c and $C are the lower-case and upper-case forms of the comparison, respectively. */ static const char * const optabs[] = { "set_convert_optab_handler (sext_optab, $B, $A, CODE_FOR_$(extend$a$b2$))", "set_convert_optab_handler (zext_optab, $B, $A, CODE_FOR_$(zero_extend$a$b2$))", "set_convert_optab_handler (sfix_optab, $B, $A, CODE_FOR_$(fix$F$a$I$b2$))", "set_convert_optab_handler (ufix_optab, $B, $A, CODE_FOR_$(fixuns$F$a$b2$))", "set_convert_optab_handler (sfixtrunc_optab, $B, $A, CODE_FOR_$(fix_trunc$F$a$I$b2$))", "set_convert_optab_handler (ufixtrunc_optab, $B, $A, CODE_FOR_$(fixuns_trunc$F$a$I$b2$))", "set_convert_optab_handler (sfloat_optab, $B, $A, CODE_FOR_$(float$I$a$F$b2$))", "set_convert_optab_handler (ufloat_optab, $B, $A, CODE_FOR_$(floatuns$I$a$F$b2$))", "set_convert_optab_handler (trunc_optab, $B, $A, CODE_FOR_$(trunc$a$b2$))", "set_convert_optab_handler (fract_optab, $B, $A, CODE_FOR_$(fract$a$b2$))", "set_convert_optab_handler (fractuns_optab, $B, $A, CODE_FOR_$(fractuns$I$a$Q$b2$))", "set_convert_optab_handler (fractuns_optab, $B, $A, CODE_FOR_$(fractuns$Q$a$I$b2$))", "set_convert_optab_handler (satfract_optab, $B, $A, CODE_FOR_$(satfract$a$Q$b2$))", "set_convert_optab_handler (satfractuns_optab, $B, $A, CODE_FOR_$(satfractuns$I$a$Q$b2$))", "set_convert_optab_handler (vec_load_lanes_optab, $A, $B, CODE_FOR_$(vec_load_lanes$a$b$))", "set_convert_optab_handler (vec_store_lanes_optab, $A, $B, CODE_FOR_$(vec_store_lanes$a$b$))", "set_optab_handler (add_optab, $A, CODE_FOR_$(add$P$a3$))", "set_optab_handler (addv_optab, $A, CODE_FOR_$(add$F$a3$)),\n\ set_optab_handler (add_optab, $A, CODE_FOR_$(add$F$a3$))", "set_optab_handler (addv_optab, $A, CODE_FOR_$(addv$I$a3$))", "set_optab_handler (add_optab, $A, CODE_FOR_$(add$Q$a3$))", "set_optab_handler (ssadd_optab, $A, CODE_FOR_$(ssadd$Q$a3$))", "set_optab_handler (usadd_optab, $A, CODE_FOR_$(usadd$Q$a3$))", "set_optab_handler (sub_optab, $A, CODE_FOR_$(sub$P$a3$))", "set_optab_handler (subv_optab, $A, CODE_FOR_$(sub$F$a3$)),\n\ set_optab_handler (sub_optab, $A, CODE_FOR_$(sub$F$a3$))", "set_optab_handler (subv_optab, $A, CODE_FOR_$(subv$I$a3$))", "set_optab_handler (sub_optab, $A, CODE_FOR_$(sub$Q$a3$))", "set_optab_handler (sssub_optab, $A, CODE_FOR_$(sssub$Q$a3$))", "set_optab_handler (ussub_optab, $A, CODE_FOR_$(ussub$Q$a3$))", "set_optab_handler (smul_optab, $A, CODE_FOR_$(mul$Q$a3$))", "set_optab_handler (ssmul_optab, $A, CODE_FOR_$(ssmul$Q$a3$))", "set_optab_handler (usmul_optab, $A, CODE_FOR_$(usmul$Q$a3$))", "set_optab_handler (smul_optab, $A, CODE_FOR_$(mul$P$a3$))", "set_optab_handler (smulv_optab, $A, CODE_FOR_$(mul$F$a3$)),\n\ set_optab_handler (smul_optab, $A, CODE_FOR_$(mul$F$a3$))", "set_optab_handler (smulv_optab, $A, CODE_FOR_$(mulv$I$a3$))", "set_optab_handler (umul_highpart_optab, $A, CODE_FOR_$(umul$a3_highpart$))", "set_optab_handler (smul_highpart_optab, $A, CODE_FOR_$(smul$a3_highpart$))", "set_widening_optab_handler (smul_widen_optab, $B, $A, CODE_FOR_$(mul$a$b3$)$N)", "set_widening_optab_handler (umul_widen_optab, $B, $A, CODE_FOR_$(umul$a$b3$)$N)", "set_widening_optab_handler (usmul_widen_optab, $B, $A, CODE_FOR_$(usmul$a$b3$)$N)", "set_widening_optab_handler (smadd_widen_optab, $B, $A, CODE_FOR_$(madd$a$b4$)$N)", "set_widening_optab_handler (umadd_widen_optab, $B, $A, CODE_FOR_$(umadd$a$b4$)$N)", "set_widening_optab_handler (ssmadd_widen_optab, $B, $A, CODE_FOR_$(ssmadd$a$b4$)$N)", "set_widening_optab_handler (usmadd_widen_optab, $B, $A, CODE_FOR_$(usmadd$a$b4$)$N)", "set_widening_optab_handler (smsub_widen_optab, $B, $A, CODE_FOR_$(msub$a$b4$)$N)", "set_widening_optab_handler (umsub_widen_optab, $B, $A, CODE_FOR_$(umsub$a$b4$)$N)", "set_widening_optab_handler (ssmsub_widen_optab, $B, $A, CODE_FOR_$(ssmsub$a$b4$)$N)", "set_widening_optab_handler (usmsub_widen_optab, $B, $A, CODE_FOR_$(usmsub$a$b4$)$N)", "set_optab_handler (sdiv_optab, $A, CODE_FOR_$(div$a3$))", "set_optab_handler (ssdiv_optab, $A, CODE_FOR_$(ssdiv$Q$a3$))", "set_optab_handler (sdivv_optab, $A, CODE_FOR_$(div$V$I$a3$))", "set_optab_handler (udiv_optab, $A, CODE_FOR_$(udiv$I$a3$))", "set_optab_handler (udiv_optab, $A, CODE_FOR_$(udiv$Q$a3$))", "set_optab_handler (usdiv_optab, $A, CODE_FOR_$(usdiv$Q$a3$))", "set_optab_handler (sdivmod_optab, $A, CODE_FOR_$(divmod$a4$))", "set_optab_handler (udivmod_optab, $A, CODE_FOR_$(udivmod$a4$))", "set_optab_handler (smod_optab, $A, CODE_FOR_$(mod$a3$))", "set_optab_handler (umod_optab, $A, CODE_FOR_$(umod$a3$))", "set_optab_handler (fmod_optab, $A, CODE_FOR_$(fmod$a3$))", "set_optab_handler (remainder_optab, $A, CODE_FOR_$(remainder$a3$))", "set_optab_handler (ftrunc_optab, $A, CODE_FOR_$(ftrunc$F$a2$))", "set_optab_handler (and_optab, $A, CODE_FOR_$(and$a3$))", "set_optab_handler (ior_optab, $A, CODE_FOR_$(ior$a3$))", "set_optab_handler (xor_optab, $A, CODE_FOR_$(xor$a3$))", "set_optab_handler (ashl_optab, $A, CODE_FOR_$(ashl$a3$))", "set_optab_handler (ssashl_optab, $A, CODE_FOR_$(ssashl$Q$a3$))", "set_optab_handler (usashl_optab, $A, CODE_FOR_$(usashl$Q$a3$))", "set_optab_handler (ashr_optab, $A, CODE_FOR_$(ashr$a3$))", "set_optab_handler (lshr_optab, $A, CODE_FOR_$(lshr$a3$))", "set_optab_handler (rotl_optab, $A, CODE_FOR_$(rotl$a3$))", "set_optab_handler (rotr_optab, $A, CODE_FOR_$(rotr$a3$))", "set_optab_handler (vashr_optab, $A, CODE_FOR_$(vashr$a3$))", "set_optab_handler (vlshr_optab, $A, CODE_FOR_$(vlshr$a3$))", "set_optab_handler (vashl_optab, $A, CODE_FOR_$(vashl$a3$))", "set_optab_handler (vrotl_optab, $A, CODE_FOR_$(vrotl$a3$))", "set_optab_handler (vrotr_optab, $A, CODE_FOR_$(vrotr$a3$))", "set_optab_handler (smin_optab, $A, CODE_FOR_$(smin$a3$))", "set_optab_handler (smax_optab, $A, CODE_FOR_$(smax$a3$))", "set_optab_handler (umin_optab, $A, CODE_FOR_$(umin$I$a3$))", "set_optab_handler (umax_optab, $A, CODE_FOR_$(umax$I$a3$))", "set_optab_handler (pow_optab, $A, CODE_FOR_$(pow$a3$))", "set_optab_handler (atan2_optab, $A, CODE_FOR_$(atan2$a3$))", "set_optab_handler (neg_optab, $A, CODE_FOR_$(neg$P$a2$))", "set_optab_handler (negv_optab, $A, CODE_FOR_$(neg$F$a2$)),\n\ set_optab_handler (neg_optab, $A, CODE_FOR_$(neg$F$a2$))", "set_optab_handler (negv_optab, $A, CODE_FOR_$(negv$I$a2$))", "set_optab_handler (neg_optab, $A, CODE_FOR_$(neg$Q$a2$))", "set_optab_handler (ssneg_optab, $A, CODE_FOR_$(ssneg$Q$a2$))", "set_optab_handler (usneg_optab, $A, CODE_FOR_$(usneg$Q$a2$))", "set_optab_handler (abs_optab, $A, CODE_FOR_$(abs$P$a2$))", "set_optab_handler (absv_optab, $A, CODE_FOR_$(abs$F$a2$)),\n\ set_optab_handler (abs_optab, $A, CODE_FOR_$(abs$F$a2$))", "set_optab_handler (absv_optab, $A, CODE_FOR_$(absv$I$a2$))", "set_optab_handler (copysign_optab, $A, CODE_FOR_$(copysign$F$a3$))", "set_optab_handler (signbit_optab, $A, CODE_FOR_$(signbit$F$a2$))", "set_optab_handler (isinf_optab, $A, CODE_FOR_$(isinf$a2$))", "set_optab_handler (sqrt_optab, $A, CODE_FOR_$(sqrt$a2$))", "set_optab_handler (floor_optab, $A, CODE_FOR_$(floor$a2$))", "set_convert_optab_handler (lfloor_optab, $B, $A, CODE_FOR_$(lfloor$F$a$I$b2$))", "set_optab_handler (fma_optab, $A, CODE_FOR_$(fma$a4$))", "set_optab_handler (fms_optab, $A, CODE_FOR_$(fms$a4$))", "set_optab_handler (fnma_optab, $A, CODE_FOR_$(fnma$a4$))", "set_optab_handler (fnms_optab, $A, CODE_FOR_$(fnms$a4$))", "set_optab_handler (ceil_optab, $A, CODE_FOR_$(ceil$a2$))", "set_convert_optab_handler (lceil_optab, $B, $A, CODE_FOR_$(lceil$F$a$I$b2$))", "set_optab_handler (round_optab, $A, CODE_FOR_$(round$a2$))", "set_optab_handler (btrunc_optab, $A, CODE_FOR_$(btrunc$a2$))", "set_optab_handler (nearbyint_optab, $A, CODE_FOR_$(nearbyint$a2$))", "set_optab_handler (rint_optab, $A, CODE_FOR_$(rint$a2$))", "set_convert_optab_handler (lrint_optab, $B, $A, CODE_FOR_$(lrint$F$a$I$b2$))", "set_convert_optab_handler (lround_optab, $B, $A, CODE_FOR_$(lround$F$a$I$b2$))", "set_optab_handler (sincos_optab, $A, CODE_FOR_$(sincos$a3$))", "set_optab_handler (sin_optab, $A, CODE_FOR_$(sin$a2$))", "set_optab_handler (asin_optab, $A, CODE_FOR_$(asin$a2$))", "set_optab_handler (cos_optab, $A, CODE_FOR_$(cos$a2$))", "set_optab_handler (acos_optab, $A, CODE_FOR_$(acos$a2$))", "set_optab_handler (exp_optab, $A, CODE_FOR_$(exp$a2$))", "set_optab_handler (exp10_optab, $A, CODE_FOR_$(exp10$a2$))", "set_optab_handler (exp2_optab, $A, CODE_FOR_$(exp2$a2$))", "set_optab_handler (expm1_optab, $A, CODE_FOR_$(expm1$a2$))", "set_optab_handler (ldexp_optab, $A, CODE_FOR_$(ldexp$a3$))", "set_optab_handler (scalb_optab, $A, CODE_FOR_$(scalb$a3$))", "set_optab_handler (significand_optab, $A, CODE_FOR_$(significand$a2$))", "set_optab_handler (logb_optab, $A, CODE_FOR_$(logb$a2$))", "set_optab_handler (ilogb_optab, $A, CODE_FOR_$(ilogb$a2$))", "set_optab_handler (log_optab, $A, CODE_FOR_$(log$a2$))", "set_optab_handler (log10_optab, $A, CODE_FOR_$(log10$a2$))", "set_optab_handler (log2_optab, $A, CODE_FOR_$(log2$a2$))", "set_optab_handler (log1p_optab, $A, CODE_FOR_$(log1p$a2$))", "set_optab_handler (tan_optab, $A, CODE_FOR_$(tan$a2$))", "set_optab_handler (atan_optab, $A, CODE_FOR_$(atan$a2$))", "set_optab_handler (strlen_optab, $A, CODE_FOR_$(strlen$a$))", "set_optab_handler (one_cmpl_optab, $A, CODE_FOR_$(one_cmpl$a2$))", "set_optab_handler (bswap_optab, $A, CODE_FOR_$(bswap$a2$))", "set_optab_handler (ffs_optab, $A, CODE_FOR_$(ffs$a2$))", "set_optab_handler (clz_optab, $A, CODE_FOR_$(clz$a2$))", "set_optab_handler (ctz_optab, $A, CODE_FOR_$(ctz$a2$))", "set_optab_handler (clrsb_optab, $A, CODE_FOR_$(clrsb$a2$))", "set_optab_handler (popcount_optab, $A, CODE_FOR_$(popcount$a2$))", "set_optab_handler (parity_optab, $A, CODE_FOR_$(parity$a2$))", "set_optab_handler (mov_optab, $A, CODE_FOR_$(mov$a$))", "set_optab_handler (movstrict_optab, $A, CODE_FOR_$(movstrict$a$))", "set_optab_handler (movmisalign_optab, $A, CODE_FOR_$(movmisalign$a$))", "set_optab_handler (storent_optab, $A, CODE_FOR_$(storent$a$))", "set_optab_handler (addcc_optab, $A, CODE_FOR_$(add$acc$))", "set_direct_optab_handler (movcc_optab, $A, CODE_FOR_$(mov$acc$))", "set_optab_handler (cbranch_optab, $A, CODE_FOR_$(cbranch$a4$))", "set_optab_handler (cmov_optab, $A, CODE_FOR_$(cmov$a6$))", "set_optab_handler (cstore_optab, $A, CODE_FOR_$(cstore$a4$))", "set_optab_handler (ctrap_optab, $A, CODE_FOR_$(ctrap$a4$))", "set_optab_handler (push_optab, $A, CODE_FOR_$(push$a1$))", "set_direct_optab_handler (reload_in_optab, $A, CODE_FOR_$(reload_in$a$))", "set_direct_optab_handler (reload_out_optab, $A, CODE_FOR_$(reload_out$a$))", "set_direct_optab_handler (movmem_optab, $A, CODE_FOR_$(movmem$a$))", "set_direct_optab_handler (cmpstr_optab, $A, CODE_FOR_$(cmpstr$a$))", "set_direct_optab_handler (cmpstrn_optab, $A, CODE_FOR_$(cmpstrn$a$))", "set_direct_optab_handler (cmpmem_optab, $A, CODE_FOR_$(cmpmem$a$))", "set_direct_optab_handler (setmem_optab, $A, CODE_FOR_$(setmem$a$))", "set_direct_optab_handler (sync_add_optab, $A, CODE_FOR_$(sync_add$I$a$))", "set_direct_optab_handler (sync_sub_optab, $A, CODE_FOR_$(sync_sub$I$a$))", "set_direct_optab_handler (sync_ior_optab, $A, CODE_FOR_$(sync_ior$I$a$))", "set_direct_optab_handler (sync_and_optab, $A, CODE_FOR_$(sync_and$I$a$))", "set_direct_optab_handler (sync_xor_optab, $A, CODE_FOR_$(sync_xor$I$a$))", "set_direct_optab_handler (sync_nand_optab, $A, CODE_FOR_$(sync_nand$I$a$))", "set_optab_handler (sync_old_add_optab, $A, CODE_FOR_$(sync_old_add$I$a$))", "set_optab_handler (sync_old_sub_optab, $A, CODE_FOR_$(sync_old_sub$I$a$))", "set_optab_handler (sync_old_ior_optab, $A, CODE_FOR_$(sync_old_ior$I$a$))", "set_optab_handler (sync_old_and_optab, $A, CODE_FOR_$(sync_old_and$I$a$))", "set_optab_handler (sync_old_xor_optab, $A, CODE_FOR_$(sync_old_xor$I$a$))", "set_optab_handler (sync_old_nand_optab, $A, CODE_FOR_$(sync_old_nand$I$a$))", "set_optab_handler (sync_new_add_optab, $A, CODE_FOR_$(sync_new_add$I$a$))", "set_optab_handler (sync_new_sub_optab, $A, CODE_FOR_$(sync_new_sub$I$a$))", "set_optab_handler (sync_new_ior_optab, $A, CODE_FOR_$(sync_new_ior$I$a$))", "set_optab_handler (sync_new_and_optab, $A, CODE_FOR_$(sync_new_and$I$a$))", "set_optab_handler (sync_new_xor_optab, $A, CODE_FOR_$(sync_new_xor$I$a$))", "set_optab_handler (sync_new_nand_optab, $A, CODE_FOR_$(sync_new_nand$I$a$))", "set_optab_handler (sync_compare_and_swap_optab, $A, CODE_FOR_$(sync_compare_and_swap$I$a$))", "set_optab_handler (sync_lock_test_and_set_optab, $A, CODE_FOR_$(sync_lock_test_and_set$I$a$))", "set_direct_optab_handler (sync_lock_release_optab, $A, CODE_FOR_$(sync_lock_release$I$a$))", "set_direct_optab_handler (atomic_exchange_optab, $A, CODE_FOR_$(atomic_exchange$I$a$))", "set_direct_optab_handler (atomic_compare_and_swap_optab, $A, CODE_FOR_$(atomic_compare_and_swap$I$a$))", "set_direct_optab_handler (atomic_load_optab, $A, CODE_FOR_$(atomic_load$I$a$))", "set_direct_optab_handler (atomic_store_optab, $A, CODE_FOR_$(atomic_store$I$a$))", "set_direct_optab_handler (atomic_add_fetch_optab, $A, CODE_FOR_$(atomic_add_fetch$I$a$))", "set_direct_optab_handler (atomic_sub_fetch_optab, $A, CODE_FOR_$(atomic_sub_fetch$I$a$))", "set_direct_optab_handler (atomic_and_fetch_optab, $A, CODE_FOR_$(atomic_and_fetch$I$a$))", "set_direct_optab_handler (atomic_nand_fetch_optab, $A, CODE_FOR_$(atomic_nand_fetch$I$a$))", "set_direct_optab_handler (atomic_xor_fetch_optab, $A, CODE_FOR_$(atomic_xor_fetch$I$a$))", "set_direct_optab_handler (atomic_or_fetch_optab, $A, CODE_FOR_$(atomic_or_fetch$I$a$))", "set_direct_optab_handler (atomic_fetch_add_optab, $A, CODE_FOR_$(atomic_fetch_add$I$a$))", "set_direct_optab_handler (atomic_fetch_sub_optab, $A, CODE_FOR_$(atomic_fetch_sub$I$a$))", "set_direct_optab_handler (atomic_fetch_and_optab, $A, CODE_FOR_$(atomic_fetch_and$I$a$))", "set_direct_optab_handler (atomic_fetch_nand_optab, $A, CODE_FOR_$(atomic_fetch_nand$I$a$))", "set_direct_optab_handler (atomic_fetch_xor_optab, $A, CODE_FOR_$(atomic_fetch_xor$I$a$))", "set_direct_optab_handler (atomic_fetch_or_optab, $A, CODE_FOR_$(atomic_fetch_or$I$a$))", "set_direct_optab_handler (atomic_add_optab, $A, CODE_FOR_$(atomic_add$I$a$))", "set_direct_optab_handler (atomic_sub_optab, $A, CODE_FOR_$(atomic_sub$I$a$))", "set_direct_optab_handler (atomic_and_optab, $A, CODE_FOR_$(atomic_and$I$a$))", "set_direct_optab_handler (atomic_nand_optab, $A, CODE_FOR_$(atomic_nand$I$a$))", "set_direct_optab_handler (atomic_xor_optab, $A, CODE_FOR_$(atomic_xor$I$a$))", "set_direct_optab_handler (atomic_or_optab, $A, CODE_FOR_$(atomic_or$I$a$))", "set_optab_handler (vec_set_optab, $A, CODE_FOR_$(vec_set$a$))", "set_optab_handler (vec_extract_optab, $A, CODE_FOR_$(vec_extract$a$))", "set_optab_handler (vec_init_optab, $A, CODE_FOR_$(vec_init$a$))", "set_optab_handler (vec_shl_optab, $A, CODE_FOR_$(vec_shl_$a$))", "set_optab_handler (vec_shr_optab, $A, CODE_FOR_$(vec_shr_$a$))", "set_optab_handler (vec_realign_load_optab, $A, CODE_FOR_$(vec_realign_load_$a$))", "set_direct_optab_handler (vec_perm_optab, $A, CODE_FOR_$(vec_perm$a$))", "set_direct_optab_handler (vec_perm_const_optab, $A, CODE_FOR_$(vec_perm_const$a$))", "set_convert_optab_handler (vcond_optab, $A, $B, CODE_FOR_$(vcond$a$b$))", "set_convert_optab_handler (vcondu_optab, $A, $B, CODE_FOR_$(vcondu$a$b$))", "set_optab_handler (ssum_widen_optab, $A, CODE_FOR_$(widen_ssum$I$a3$))", "set_optab_handler (usum_widen_optab, $A, CODE_FOR_$(widen_usum$I$a3$))", "set_optab_handler (udot_prod_optab, $A, CODE_FOR_$(udot_prod$I$a$))", "set_optab_handler (sdot_prod_optab, $A, CODE_FOR_$(sdot_prod$I$a$))", "set_optab_handler (reduc_smax_optab, $A, CODE_FOR_$(reduc_smax_$a$))", "set_optab_handler (reduc_umax_optab, $A, CODE_FOR_$(reduc_umax_$a$))", "set_optab_handler (reduc_smin_optab, $A, CODE_FOR_$(reduc_smin_$a$))", "set_optab_handler (reduc_umin_optab, $A, CODE_FOR_$(reduc_umin_$a$))", "set_optab_handler (reduc_splus_optab, $A, CODE_FOR_$(reduc_splus_$a$))" , "set_optab_handler (reduc_uplus_optab, $A, CODE_FOR_$(reduc_uplus_$a$))", "set_optab_handler (vec_widen_umult_hi_optab, $A, CODE_FOR_$(vec_widen_umult_hi_$a$))", "set_optab_handler (vec_widen_umult_lo_optab, $A, CODE_FOR_$(vec_widen_umult_lo_$a$))", "set_optab_handler (vec_widen_smult_hi_optab, $A, CODE_FOR_$(vec_widen_smult_hi_$a$))", "set_optab_handler (vec_widen_smult_lo_optab, $A, CODE_FOR_$(vec_widen_smult_lo_$a$))", "set_optab_handler (vec_widen_ushiftl_hi_optab, $A, CODE_FOR_$(vec_widen_ushiftl_hi_$a$))", "set_optab_handler (vec_widen_ushiftl_lo_optab, $A, CODE_FOR_$(vec_widen_ushiftl_lo_$a$))", "set_optab_handler (vec_widen_sshiftl_hi_optab, $A, CODE_FOR_$(vec_widen_sshiftl_hi_$a$))", "set_optab_handler (vec_widen_sshiftl_lo_optab, $A, CODE_FOR_$(vec_widen_sshiftl_lo_$a$))", "set_optab_handler (vec_unpacks_hi_optab, $A, CODE_FOR_$(vec_unpacks_hi_$a$))", "set_optab_handler (vec_unpacks_lo_optab, $A, CODE_FOR_$(vec_unpacks_lo_$a$))", "set_optab_handler (vec_unpacku_hi_optab, $A, CODE_FOR_$(vec_unpacku_hi_$a$))", "set_optab_handler (vec_unpacku_lo_optab, $A, CODE_FOR_$(vec_unpacku_lo_$a$))", "set_optab_handler (vec_unpacks_float_hi_optab, $A, CODE_FOR_$(vec_unpacks_float_hi_$a$))", "set_optab_handler (vec_unpacks_float_lo_optab, $A, CODE_FOR_$(vec_unpacks_float_lo_$a$))", "set_optab_handler (vec_unpacku_float_hi_optab, $A, CODE_FOR_$(vec_unpacku_float_hi_$a$))", "set_optab_handler (vec_unpacku_float_lo_optab, $A, CODE_FOR_$(vec_unpacku_float_lo_$a$))", "set_optab_handler (vec_pack_trunc_optab, $A, CODE_FOR_$(vec_pack_trunc_$a$))", "set_optab_handler (vec_pack_ssat_optab, $A, CODE_FOR_$(vec_pack_ssat_$a$))", "set_optab_handler (vec_pack_usat_optab, $A, CODE_FOR_$(vec_pack_usat_$a$))", "set_optab_handler (vec_pack_sfix_trunc_optab, $A, CODE_FOR_$(vec_pack_sfix_trunc_$a$))", "set_optab_handler (vec_pack_ufix_trunc_optab, $A, CODE_FOR_$(vec_pack_ufix_trunc_$a$))" }; static void gen_insn (rtx); static void gen_insn (rtx insn) { const char *name = XSTR (insn, 0); int m1 = 0, m2 = 0, op = 0; size_t pindex; int i; const char *np, *pp, *p, *q; /* Don't mention instructions whose names are the null string. They are in the machine description just to be recognized. */ if (*name == 0) return; /* See if NAME matches one of the patterns we have for the optabs we know about. */ for (pindex = 0; pindex < ARRAY_SIZE (optabs); pindex++) { int force_float = 0, force_int = 0, force_partial_int = 0; int force_fixed = 0; int force_wider = 0; int matches = 1; for (pp = optabs[pindex]; pp[0] != '$' || pp[1] != '('; pp++) ; for (pp += 2, np = name; matches && ! (pp[0] == '$' && pp[1] == ')'); pp++) { if (*pp != '$') { if (*pp != *np++) break; } else switch (*++pp) { case 'N': force_wider = 1; break; case 'I': force_int = 1; break; case 'P': force_partial_int = 1; break; case 'F': force_float = 1; break; case 'Q': force_fixed = 1; break; case 'V': break; case 'c': for (op = 0; op < NUM_RTX_CODE; op++) { for (p = GET_RTX_NAME(op), q = np; *p; p++, q++) if (*p != *q) break; /* We have to be concerned about matching "gt" and missing "gtu", e.g., so verify we have reached the end of thing we are to match. */ if (*p == 0 && *q == 0 && (GET_RTX_CLASS (op) == RTX_COMPARE || GET_RTX_CLASS (op) == RTX_COMM_COMPARE)) break; } if (op == NUM_RTX_CODE) matches = 0; else np += strlen (GET_RTX_NAME(op)); break; case 'a': case 'b': /* This loop will stop at the first prefix match, so look through the modes in reverse order, in case there are extra CC modes and CC is a prefix of the CC modes (as it should be). */ for (i = (MAX_MACHINE_MODE) - 1; i >= 0; i--) { for (p = GET_MODE_NAME(i), q = np; *p; p++, q++) if (TOLOWER (*p) != *q) break; if (*p == 0 && (! force_int || mode_class[i] == MODE_INT || mode_class[i] == MODE_VECTOR_INT) && (! force_partial_int || mode_class[i] == MODE_INT || mode_class[i] == MODE_PARTIAL_INT || mode_class[i] == MODE_VECTOR_INT) && (! force_float || mode_class[i] == MODE_FLOAT || mode_class[i] == MODE_DECIMAL_FLOAT || mode_class[i] == MODE_COMPLEX_FLOAT || mode_class[i] == MODE_VECTOR_FLOAT) && (! force_fixed || mode_class[i] == MODE_FRACT || mode_class[i] == MODE_UFRACT || mode_class[i] == MODE_ACCUM || mode_class[i] == MODE_UACCUM || mode_class[i] == MODE_VECTOR_FRACT || mode_class[i] == MODE_VECTOR_UFRACT || mode_class[i] == MODE_VECTOR_ACCUM || mode_class[i] == MODE_VECTOR_UACCUM) && (! force_wider || *pp == 'a' || m1 < i)) break; } if (i < 0) matches = 0; else if (*pp == 'a') m1 = i, np += strlen (GET_MODE_NAME(i)); else m2 = i, np += strlen (GET_MODE_NAME(i)); force_int = force_partial_int = force_float = force_fixed = 0; break; default: gcc_unreachable (); } } if (matches && pp[0] == '$' && pp[1] == ')' && *np == 0) break; } if (pindex == ARRAY_SIZE (optabs)) return; /* We found a match. If this pattern is only conditionally present, write out the "if" and two extra blanks. */ if (*XSTR (insn, 2) != 0) printf (" if (HAVE_%s)\n ", name); printf (" "); /* Now write out the initialization, making all required substitutions. */ for (pp = optabs[pindex]; *pp; pp++) { if (*pp != '$') putchar (*pp); else switch (*++pp) { case '(': case ')': case 'I': case 'F': case 'N': break; case 'V': if (SCALAR_FLOAT_MODE_P (m1)) printf ("v"); break; case 'a': for (np = GET_MODE_NAME(m1); *np; np++) putchar (TOLOWER (*np)); break; case 'b': for (np = GET_MODE_NAME(m2); *np; np++) putchar (TOLOWER (*np)); break; case 'A': printf ("%smode", GET_MODE_NAME(m1)); break; case 'B': printf ("%smode", GET_MODE_NAME(m2)); break; case 'c': printf ("%s", GET_RTX_NAME(op)); break; case 'C': for (np = GET_RTX_NAME(op); *np; np++) putchar (TOUPPER (*np)); break; } } printf (";\n"); } extern int main (int, char **); int main (int argc, char **argv) { rtx desc; progname = "genopinit"; if (!init_rtx_reader_args (argc, argv)) return (FATAL_EXIT_CODE); printf ("/* Generated automatically by the program `genopinit'\n\ from the machine description file `md'. */\n\n"); printf ("#include \"config.h\"\n"); printf ("#include \"system.h\"\n"); printf ("#include \"coretypes.h\"\n"); printf ("#include \"tm.h\"\n"); printf ("#include \"rtl.h\"\n"); printf ("#include \"tm_p.h\"\n"); printf ("#include \"flags.h\"\n"); printf ("#include \"insn-config.h\"\n"); printf ("#include \"recog.h\"\n"); printf ("#include \"expr.h\"\n"); printf ("#include \"optabs.h\"\n"); printf ("#include \"reload.h\"\n\n"); printf ("void\ninit_all_optabs (void)\n{\n"); puts ("\ #ifdef FIXUNS_TRUNC_LIKE_FIX_TRUNC\n\ int i, j;\n\ #endif\n"); /* Read the machine description. */ while (1) { int line_no, insn_code_number = 0; desc = read_md_rtx (&line_no, &insn_code_number); if (desc == NULL) break; if (GET_CODE (desc) == DEFINE_INSN || GET_CODE (desc) == DEFINE_EXPAND) gen_insn (desc); } puts ("\ \n\ #ifdef FIXUNS_TRUNC_LIKE_FIX_TRUNC\n\ /* This flag says the same insns that convert to a signed fixnum\n\ also convert validly to an unsigned one. */\n\ for (i = 0; i < NUM_MACHINE_MODES; i++)\n\ for (j = 0; j < NUM_MACHINE_MODES; j++)\n\ set_convert_optab_handler\n\ (ufixtrunc_optab, (enum machine_mode) i, (enum machine_mode) j,\n\ convert_optab_handler (sfixtrunc_optab, (enum machine_mode) i,\n\ (enum machine_mode) j));\n\ #endif\n\ }"); fflush (stdout); return (ferror (stdout) != 0 ? FATAL_EXIT_CODE : SUCCESS_EXIT_CODE); }
Go to most recent revision | Compare with Previous | Blame | View Log