OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

[/] [openrisc/] [trunk/] [gnu-src/] [gdb-7.1/] [gdb/] [testsuite/] [gdb.base/] [trace-commands.exp] - Rev 252

Go to most recent revision | Compare with Previous | Blame | View Log

# Copyright 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Test that the source command's verbose mode works, the 'set trace-commands'
# command works, and that the nest depth is correct in various circumstances.

if $tracelevel then {
    strace $tracelevel
}

gdb_exit
gdb_start

# Create a file to source
set fd [open "tracecommandsscript" w]
puts $fd "\
echo in tracecommandsscript\\n
define func
 echo in func \$arg0\\n
end
if 1
 if 2
  if 3
   if 4
    echo deep\\n
    func 999
   end
  end
 end
end
"
close $fd

# Make sure that the show trace-commands exists and the default is 'off'.
gdb_test "show trace-commands" "State of GDB CLI command tracing is off\\." \
         "show trace-commands says off"

# Source the script with verbose mode.
send_gdb "source -v tracecommandsscript\n"
gdb_expect_list "source -v" ".*$gdb_prompt $" {
  {[\r\n]\+echo in tracecommandsscript\\n}
  {[\r\n]\+define func}
  {[\r\n]\+if 1}
  {[\r\n]\+\+if 2}
  {[\r\n]\+\+\+if 3}
  {[\r\n]\+\+\+\+if 4}
  {[\r\n]\+\+\+\+\+echo deep\\n}
  {[\r\n]\+\+\+\+\+func 999}
  {[\r\n]\+\+\+\+\+\+echo in func 999\\n}
}

# Turn on command tracing.
gdb_test "set trace-commands" "" "set trace-commands"

# Make sure show trace-commands now gives 'on'.
gdb_test "show trace-commands" \
    {\+show trace-commands[\r\n]+State of GDB CLI command tracing is on\.} \
         "show trace-commands says on"

# Simple test
gdb_test "echo hi\\n" {\+echo hi\\n[\r\n]+hi} "simple trace-commands test"

# Nested test
send_gdb "if 1\nset \$i = 0\nwhile \$i < 5\nfunc \$i\nset \$i += 1\nend\nend\n"
gdb_expect_list "nested trace-commands test" ".*$gdb_prompt $" {
  {[\r\n]\+if 1}
  {[\r\n]\+\+set \$i = 0}
  {[\r\n]\+\+while \$i < 5}
  {[\r\n]\+\+\+func \$i}
  {[\r\n]\+\+\+\+echo in func \$i\\n}
  {[\r\n]\+\+\+set \$i \+= 1}
  {[\r\n]\+\+\+func \$i}
  {[\r\n]\+\+\+\+echo in func \$i\\n}
  {[\r\n]\+\+\+set \$i \+= 1}
  {[\r\n]\+\+\+func \$i}
  {[\r\n]\+\+\+\+echo in func \$i\\n}
  {[\r\n]\+\+\+set \$i \+= 1}
  {[\r\n]\+\+\+func \$i}
  {[\r\n]\+\+\+\+echo in func \$i\\n}
  {[\r\n]\+\+\+set \$i \+= 1}
  {[\r\n]\+\+\+func \$i}
  {[\r\n]\+\+\+\+echo in func \$i\\n}
  {[\r\n]\+\+\+set \$i \+= 1}
}

# Function with source works
send_gdb "define topfunc\nsource tracecommandsscript\nend\n"
gdb_expect_list "define user command" ".*$gdb_prompt $" {
  {[\r\n]\+define topfunc}
}
send_gdb "topfunc\n"
gdb_expect_list "nested trace-commands test with source" ".*$gdb_prompt $" {
  {[\r\n]\+topfunc}
  {[\r\n]\+\+source tracecommandsscript}
  {[\r\n]\+\+echo in tracecommandsscript\\n}
  {[\r\n]\+\+define func}
  {[\r\n]\+\+if 1}
  {[\r\n]\+\+\+if 2}
  {[\r\n]\+\+\+\+if 3}
  {[\r\n]\+\+\+\+\+if 4}
  {[\r\n]\+\+\+\+\+\+echo deep\\n}
  {[\r\n]\+\+\+\+\+\+func 999}
  {[\r\n]\+\+\+\+\+\+\+echo in func 999\\n}
}

# Test nest depth resets properly on error
send_gdb "if 1\nif 2\nload\necho should not get here\\n\nend\nend\n"
gdb_expect_list "depth resets on error part 1" ".*$gdb_prompt $" {
  {[\r\n]\+if 1}
  {[\r\n]\+\+if 2}
  {[\r\n]\+\+\+load}
  {[\r\n]No executable file specified\.}
  {[\r\n]Use the "file" or "exec-file" command\.}
}
gdb_test "echo hi\\n" {[\r\n]\+echo hi\\n[\r\n]+hi} \
         "depth resets on error part 2"

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.