OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_alu.v] - Rev 767

Go to most recent revision | Compare with Previous | Blame | View Log

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  OR1200's ALU                                                ////
////                                                              ////
////  This file is part of the OpenRISC 1200 project              ////
////  http://www.opencores.org/project,or1k                       ////
////                                                              ////
////  Description                                                 ////
////  ALU                                                         ////
////                                                              ////
////  To Do:                                                      ////
////   - make it smaller and faster                               ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// $Log: or1200_alu.v,v $
// Revision 2.0  2010/06/30 11:00:00  ORSoC
// Minor update: 
// Defines added, flags are corrected. 
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
module or1200_alu(
	a, b, mult_mac_result, macrc_op,
	alu_op, alu_op2, comp_op,
	cust5_op, cust5_limm,
	result, flagforw, flag_we,
	ovforw, ov_we,
	cyforw, cy_we, carry, flag
);
 
parameter width = `OR1200_OPERAND_WIDTH;
 
//
// I/O
//
input	[width-1:0]		a;
input	[width-1:0]		b;
input	[width-1:0]		mult_mac_result;
input				macrc_op;
input	[`OR1200_ALUOP_WIDTH-1:0]	alu_op;
input	[`OR1200_ALUOP2_WIDTH-1:0]	alu_op2;
input	[`OR1200_COMPOP_WIDTH-1:0]	comp_op;
input	[4:0]			cust5_op;
input	[5:0]			cust5_limm;
output	[width-1:0]		result;
output				flagforw;
output				flag_we;
output				cyforw;
output				cy_we;
output				ovforw;
output				ov_we;
input				carry;
input         flag;
 
//
// Internal wires and regs
//
reg	[width-1:0]		result;
reg	[width-1:0]		shifted_rotated;
reg	[width-1:0]		extended;   
reg	[width-1:0]		result_cust5;
reg				flagforw;
reg				flagcomp;
reg				flag_we;
reg				cyforw;
reg				cy_we;
reg				ovforw;
reg				ov_we;   
wire	[width-1:0]		comp_a;
wire	[width-1:0]		comp_b;
wire				a_eq_b;
wire				a_lt_b;
wire	[width-1:0]		result_sum;
wire	[width-1:0]		result_and;
wire				cy_sum;
`ifdef OR1200_IMPL_SUB
wire				cy_sub;
`endif
wire    			ov_sum;
wire    [width-1:0] 		carry_in;
 
wire    [width-1:0]		b_mux;
 
 
 
//
// Combinatorial logic
//
 
assign comp_a = {a[width-1] ^ comp_op[3] , a[width-2:0]};
assign comp_b = {b[width-1] ^ comp_op[3] , b[width-2:0]};
`ifdef OR1200_IMPL_ALU_COMP1
assign a_eq_b = (comp_a == comp_b);
assign a_lt_b = (comp_a < comp_b);
`endif
`ifdef OR1200_IMPL_ALU_COMP3
assign a_eq_b = !(|result_sum);
// signed compare when comp_op[3] is set
assign a_lt_b = comp_op[3] ? ((a[width-1] & !b[width-1]) |  
			      (!a[width-1] & !b[width-1] & result_sum[width-1])|
			      (a[width-1] & b[width-1] & result_sum[width-1])):
		(a < b);
 
`endif
 
`ifdef OR1200_IMPL_SUB
 `ifdef OR1200_IMPL_ALU_COMP3
assign cy_sub =	a_lt_b;
 `else			      
assign cy_sub = (comp_a < comp_b);
 `endif			      
`endif
 
`ifdef OR1200_IMPL_ADDC   
assign carry_in = (alu_op==`OR1200_ALUOP_ADDC) ? 
		  {{width-1{1'b0}},carry} : {width{1'b0}};
`else
assign carry_in = {width-1{1'b0}};
`endif
 
`ifdef OR1200_IMPL_ALU_COMP3
`ifdef OR1200_IMPL_SUB
assign b_mux = ((alu_op==`OR1200_ALUOP_SUB) | (alu_op==`OR1200_ALUOP_COMP)) ? 
		(~b)+1 : b;
`else
assign b_mux = (alu_op==`OR1200_ALUOP_COMP) ? (~b)+1 : b;
`endif
`else // ! `ifdef OR1200_IMPL_ALU_COMP3
`ifdef OR1200_IMPL_SUB
assign b_mux = (alu_op==`OR1200_ALUOP_SUB) ? (~b)+1 : b;
`else
assign b_mux = b;
`endif
`endif			      
assign {cy_sum, result_sum} = (a + b_mux) + carry_in;
// Numbers either both +ve and bit 31 of result set
assign ov_sum = ((!a[width-1] & !b_mux[width-1]) & result_sum[width-1]) |
// or both -ve and bit 31 of result clear
		((a[width-1] & b_mux[width-1]) & !result_sum[width-1]);  
assign result_and = a & b;
 
//
// Simulation check for bad ALU behavior
//
`ifdef OR1200_WARNINGS
// synopsys translate_off
always @(result) begin
	if (result === 32'bx)
		$display("%t: WARNING: 32'bx detected on ALU result bus. Please check !", $time);
end
// synopsys translate_on
`endif
 
//
// Central part of the ALU
//
always @(alu_op or alu_op2 or a or b or result_sum or result_and or macrc_op
	 or shifted_rotated or mult_mac_result or flag or result_cust5 or carry
`ifdef OR1200_IMPL_ALU_EXT
         or extended
`endif	 
) begin
`ifdef OR1200_CASE_DEFAULT
	casez (alu_op)		// synopsys parallel_case
`else
	casez (alu_op)		// synopsys full_case parallel_case
`endif
`ifdef OR1200_IMPL_ALU_FFL1	  
		`OR1200_ALUOP_FFL1: begin
`ifdef OR1200_CASE_DEFAULT
		   casez (alu_op2) // synopsys parallel_case
`else
		   casez (alu_op2) // synopsys full_case parallel_case
`endif
		     0: begin // FF1
			result = a[0] ? 1 : a[1] ? 2 : a[2] ? 3 : a[3] ? 4 : a[4] ? 5 : a[5] ? 6 : a[6] ? 7 : a[7] ? 8 : a[8] ? 9 : a[9] ? 10 : a[10] ? 11 : a[11] ? 12 : a[12] ? 13 : a[13] ? 14 : a[14] ? 15 : a[15] ? 16 : a[16] ? 17 : a[17] ? 18 : a[18] ? 19 : a[19] ? 20 : a[20] ? 21 : a[21] ? 22 : a[22] ? 23 : a[23] ? 24 : a[24] ? 25 : a[25] ? 26 : a[26] ? 27 : a[27] ? 28 : a[28] ? 29 : a[29] ? 30 : a[30] ? 31 : a[31] ? 32 : 0;
		     end
		     default: begin // FL1
			result = a[31] ? 32 : a[30] ? 31 : a[29] ? 30 : a[28] ? 29 : a[27] ? 28 : a[26] ? 27 : a[25] ? 26 : a[24] ? 25 : a[23] ? 24 : a[22] ? 23 : a[21] ? 22 : a[20] ? 21 : a[19] ? 20 : a[18] ? 19 : a[17] ? 18 : a[16] ? 17 : a[15] ? 16 : a[14] ? 15 : a[13] ? 14 : a[12] ? 13 : a[11] ? 12 : a[10] ? 11 : a[9] ? 10 : a[8] ? 9 : a[7] ? 8 : a[6] ? 7 : a[5] ? 6 : a[4] ? 5 : a[3] ? 4 : a[2] ? 3 : a[1] ? 2 : a[0] ? 1 : 0 ;
		     end
		   endcase // casez (alu_op2)
		end // case: `OR1200_ALUOP_FFL1
`endif //  `ifdef OR1200_IMPL_ALU_FFL1
`ifdef OR1200_IMPL_ALU_CUST5
 
		`OR1200_ALUOP_CUST5 : begin 
				result = result_cust5;
		end
`endif		     
		`OR1200_ALUOP_SHROT : begin 
				result = shifted_rotated;
		end
`ifdef OR1200_IMPL_ADDC
		`OR1200_ALUOP_ADDC,
`endif
`ifdef OR1200_IMPL_SUB
		`OR1200_ALUOP_SUB,
`endif	 
		`OR1200_ALUOP_ADD : begin
				result = result_sum;
		end
		`OR1200_ALUOP_XOR : begin
				result = a ^ b;
		end
		`OR1200_ALUOP_OR  : begin
				result = a | b;
		end
`ifdef OR1200_IMPL_ALU_EXT		     
		`OR1200_ALUOP_EXTHB  : begin
		                result = extended;
		end
		`OR1200_ALUOP_EXTW  : begin
		                result = extended;
		end		
`endif     
		`OR1200_ALUOP_MOVHI : begin
				if (macrc_op) begin
					result = mult_mac_result;
				end
				else begin
					result = b << 16;
				end
		end
`ifdef OR1200_MULT_IMPLEMENTED
`ifdef OR1200_DIV_IMPLEMENTED
		`OR1200_ALUOP_DIV,
		`OR1200_ALUOP_DIVU,
`endif
		`OR1200_ALUOP_MUL,
		`OR1200_ALUOP_MULU : begin
				result = mult_mac_result;
		end
`endif
		`OR1200_ALUOP_CMOV: begin
			result = flag ? a : b;
		end
 
`ifdef OR1200_CASE_DEFAULT
		default: begin
`else
		`OR1200_ALUOP_COMP, `OR1200_ALUOP_AND: begin
`endif
			result=result_and;
		end 
	endcase
end
 
//
// Generate flag and flag write enable
//
always @(alu_op or result_sum or result_and or flagcomp
) begin
	casez (alu_op)		// synopsys parallel_case
`ifdef OR1200_ADDITIONAL_FLAG_MODIFIERS
`ifdef OR1200_IMPL_ADDC
		`OR1200_ALUOP_ADDC,
`endif	 
		`OR1200_ALUOP_ADD : begin
			flagforw = (result_sum == 32'h0000_0000);
			flag_we = 1'b1;
		end
		`OR1200_ALUOP_AND: begin
			flagforw = (result_and == 32'h0000_0000);
			flag_we = 1'b1;
		end
`endif
		`OR1200_ALUOP_COMP: begin
			flagforw = flagcomp;
			flag_we = 1'b1;
		end
		default: begin
			flagforw = flagcomp;
			flag_we = 1'b0;
		end
	endcase
end
 
//
// Generate SR[CY] write enable
//
always @(alu_op or cy_sum
`ifdef OR1200_IMPL_CY
`ifdef OR1200_IMPL_SUB
	or cy_sub
`endif
`endif
) begin
	casez (alu_op)		// synopsys parallel_case
`ifdef OR1200_IMPL_CY
`ifdef OR1200_IMPL_ADDC
		`OR1200_ALUOP_ADDC,
`endif	  
		`OR1200_ALUOP_ADD : begin
			cyforw = cy_sum;
			cy_we = 1'b1;
		end
`ifdef OR1200_IMPL_SUB
		`OR1200_ALUOP_SUB: begin
			cyforw = cy_sub;
			cy_we = 1'b1;
		end
`endif
`endif
		default: begin
			cyforw = 1'b0;
			cy_we = 1'b0;
		end
	endcase
end
 
 
//
// Generate SR[OV] write enable
//
always @(alu_op or ov_sum) begin
	casez (alu_op)		// synopsys parallel_case
`ifdef OR1200_IMPL_OV
`ifdef OR1200_IMPL_ADDC
		`OR1200_ALUOP_ADDC,
`endif
`ifdef OR1200_IMPL_SUB
		`OR1200_ALUOP_SUB,
`endif	 
		`OR1200_ALUOP_ADD : begin
			ovforw = ov_sum;
			ov_we = 1'b1;
		end
`endif	  
		default: begin
			ovforw = 1'b0;
			ov_we = 1'b0;
		end
	endcase
end
 
//
// Shifts and rotation
//
always @(alu_op2 or a or b) begin
	case (alu_op2)		// synopsys parallel_case
	  `OR1200_SHROTOP_SLL :
				shifted_rotated = (a << b[4:0]);
	  `OR1200_SHROTOP_SRL :
				shifted_rotated = (a >> b[4:0]);
 
`ifdef OR1200_IMPL_ALU_ROTATE
	  `OR1200_SHROTOP_ROR :
	                        shifted_rotated = (a << (6'd32-{1'b0,b[4:0]})) |
						  (a >> b[4:0]);
`endif
	  default:
	                        shifted_rotated = ({32{a[31]}} << 
						   (6'd32-{1'b0, b[4:0]})) | 
						  a >> b[4:0];
	endcase
end
 
//
// First type of compare implementation
//
`ifdef OR1200_IMPL_ALU_COMP1
always @(comp_op or a_eq_b or a_lt_b) begin
	case(comp_op[2:0])	// synopsys parallel_case
		`OR1200_COP_SFEQ:
			flagcomp = a_eq_b;
		`OR1200_COP_SFNE:
			flagcomp = ~a_eq_b;
		`OR1200_COP_SFGT:
			flagcomp = ~(a_eq_b | a_lt_b);
		`OR1200_COP_SFGE:
			flagcomp = ~a_lt_b;
		`OR1200_COP_SFLT:
			flagcomp = a_lt_b;
		`OR1200_COP_SFLE:
			flagcomp = a_eq_b | a_lt_b;
		default:
			flagcomp = 1'b0;
	endcase
end
`endif
 
//
// Second type of compare implementation
//
`ifdef OR1200_IMPL_ALU_COMP2
always @(comp_op or comp_a or comp_b) begin
	case(comp_op[2:0])	// synopsys parallel_case
		`OR1200_COP_SFEQ:
			flagcomp = (comp_a == comp_b);
		`OR1200_COP_SFNE:
			flagcomp = (comp_a != comp_b);
		`OR1200_COP_SFGT:
			flagcomp = (comp_a > comp_b);
		`OR1200_COP_SFGE:
			flagcomp = (comp_a >= comp_b);
		`OR1200_COP_SFLT:
			flagcomp = (comp_a < comp_b);
		`OR1200_COP_SFLE:
			flagcomp = (comp_a <= comp_b);
		default:
			flagcomp = 1'b0;
	endcase
end
`endif //  `ifdef OR1200_IMPL_ALU_COMP2
 
`ifdef OR1200_IMPL_ALU_COMP3
always @(comp_op or a_eq_b or a_lt_b) begin
	case(comp_op[2:0])	// synopsys parallel_case
		`OR1200_COP_SFEQ:
			flagcomp = a_eq_b;
		`OR1200_COP_SFNE:
			flagcomp = ~a_eq_b;
		`OR1200_COP_SFGT:
			flagcomp = ~(a_eq_b | a_lt_b);
		`OR1200_COP_SFGE:
			flagcomp = ~a_lt_b;
		`OR1200_COP_SFLT:
			flagcomp = a_lt_b;
		`OR1200_COP_SFLE:
			flagcomp = a_eq_b | a_lt_b;
		default:
			flagcomp = 1'b0;
	endcase
end
`endif
 
 
`ifdef OR1200_IMPL_ALU_EXT
   always @(alu_op or alu_op2 or a) begin
      casez (alu_op2)
	`OR1200_EXTHBOP_HS : extended = {{16{a[15]}},a[15:0]};
	`OR1200_EXTHBOP_BS : extended = {{24{a[7]}},a[7:0]};
	`OR1200_EXTHBOP_HZ : extended = {16'd0,a[15:0]};
	`OR1200_EXTHBOP_BZ : extended = {24'd0,a[7:0]};
	default: extended = a; // Used for l.extw instructions
      endcase // casez (alu_op2)
   end
`endif 
 
 
//
// l.cust5 custom instructions
//
`ifdef OR1200_IMPL_ALU_CUST5
// Examples for move byte, set bit and clear bit
//
always @(cust5_op or cust5_limm or a or b) begin
	casez (cust5_op)		// synopsys parallel_case
		5'h1 : begin 
			casez (cust5_limm[1:0])
			  2'h0: result_cust5 = {a[31:8], b[7:0]};
			  2'h1: result_cust5 = {a[31:16], b[7:0], a[7:0]};
			  2'h2: result_cust5 = {a[31:24], b[7:0], a[15:0]};
			  2'h3: result_cust5 = {b[7:0], a[23:0]};
			endcase
		end
		5'h2 :
			result_cust5 = a | (1 << cust5_limm);
		5'h3 :
			result_cust5 = a & (32'hffffffff ^ (1 << cust5_limm));
//
// *** Put here new l.cust5 custom instructions ***
//
		default: begin
			result_cust5 = a;
		end
	endcase
end // always @ (cust5_op or cust5_limm or a or b)
`endif   
 
endmodule
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.