Subversion Repositories openrisc

#ifndef CYGONCE_ARM_AEB_SERIAL_H
#define CYGONCE_ARM_AEB_SERIAL_H
 
// ====================================================================
//
//      aeb_serial.h
//
//      Device I/O - Description of ARM AEB-1 serial hardware
//
// ====================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
// ====================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):           gthomas
// Contributors:        gthomas
// Date:        1999-02-04
// Purpose:     Internal interfaces for serial I/O drivers
// Description:
//
//####DESCRIPTIONEND####
//
// ====================================================================
 
// Description of serial ports on ARM AEB-1
 
struct serial_port {
    unsigned char _byte[32];
};
 
#define REG(n) _byte[n*4]
 
// Receive control registers
#define REG_RHR REG(0)    // Receive holding register
#define REG_ISR REG(2)    // Interrupt status register
#define REG_LSR REG(5)    // Line status register
#define REG_MSR REG(6)    // Modem status register
#define REG_SCR REG(7)    // Scratch register
 
// Transmit control registers
#define REG_THR REG(0)    // Transmit holding register
#define REG_IER REG(1)    // Interrupt enable register
#define REG_FCR REG(2)    // FIFO control register
#define REG_LCR REG(3)    // Line control register
#define REG_MCR REG(4)    // Modem control register
#define REG_LDL REG(0)    // LSB of baud rate
#define REG_MDL REG(1)    // MSB of baud rate
 
// Interrupt Enable Register
#define IER_RCV 0x01
#define IER_XMT 0x02
#define IER_LS  0x04
#define IER_MS  0x08
 
// Line Control Register
#define LCR_WL5 0x00    // Word length
#define LCR_WL6 0x01
#define LCR_WL7 0x02
#define LCR_WL8 0x03
#define LCR_SB1 0x00    // Number of stop bits
#define LCR_SB1_5 0x04  // 1.5 -> only valid with 5 bit words
#define LCR_SB2 0x04
#define LCR_PN  0x00    // Parity mode - none
#define LCR_PE  0x0C    // Parity mode - even
#define LCR_PO  0x08    // Parity mode - odd
#define LCR_PM  0x28    // Forced "mark" parity
#define LCR_PS  0x38    // Forced "space" parity
#define LCR_DL  0x80    // Enable baud rate latch
 
// Line Status Register
#define LSR_RSR 0x01
#define LSR_THE 0x20
 
// Modem Control Register
#define MCR_DTR 0x01
#define MCR_RTS 0x02
#define MCR_INT 0x08   // Enable interrupts
 
// Interrupt status register
#define ISR_Tx  0x02
#define ISR_Rx  0x04
 
static unsigned char select_word_length[] = {
    LCR_WL5,    // 5 bits / word (char)
    LCR_WL6,
    LCR_WL7,
    LCR_WL8
};
 
static unsigned char select_stop_bits[] = {
    0,
    LCR_SB1,    // 1 stop bit
    LCR_SB1_5,  // 1.5 stop bit
    LCR_SB2     // 2 stop bits
};
 
static unsigned char select_parity[] = {
    LCR_PN,     // No parity
    LCR_PE,     // Even parity
    LCR_PO,     // Odd parity
    LCR_PM,     // Mark parity
    LCR_PS,     // Space parity
};
 
// Baud rate values, based on raw 24MHz clock
 
static unsigned short select_baud[] = {
           0,  // Unused
     10000*3,  // 50
      6667*3,  // 75
      4545*3,  // 110
      3717*3,  // 134.5
      3333*3,  // 150
           0,  // 200
      1667*3,  // 300
       833*3,  // 600
       417*3,  // 1200
       277*3,  // 1800
       208*3,  // 2400
       139*3,  // 3600
       104*3,  // 4800
        69*3,  // 7200
        52*3,  // 9600
    (69*3)/2,  // 14400
        26*3,  // 19200
        13*3,  // 38400
          26,  // 57600
          13,  // 115200
           0,  // 230400
};
 
#endif // CYGONCE_ARM_AEB_SERIAL_H