OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [arm/] [ebsa285/] [current/] [include/] [hal_platform_ints.h] - Rev 838

Go to most recent revision | Compare with Previous | Blame | View Log

#ifndef CYGONCE_HAL_PLATFORM_INTS_H
#define CYGONCE_HAL_PLATFORM_INTS_H
//==========================================================================
//
//      hal_platform_ints.h
//
//      HAL Interrupt and clock support
//
//==========================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    hmt
// Contributors: hmt
// Date:         1999-04-21
// Purpose:      Define Interrupt support
// Description:  The interrupt details for the EBSA285 are defined here.
// Usage:
//               #include <cyg/hal/hal_platform_ints.h>
//               ...
//              
//
//####DESCRIPTIONEND####
//
//==========================================================================
 
#define CYGNUM_HAL_INTERRUPT_reserved0                   0
#define CYGNUM_HAL_INTERRUPT_SOFT_IRQ                    1
#define CYGNUM_HAL_INTERRUPT_SERIAL_RX                   2
#define CYGNUM_HAL_INTERRUPT_SERIAL_TX                   3
#define CYGNUM_HAL_INTERRUPT_TIMER_1                     4
#define CYGNUM_HAL_INTERRUPT_TIMER_2                     5
#define CYGNUM_HAL_INTERRUPT_TIMER_3                     6    
#define CYGNUM_HAL_INTERRUPT_TIMER_4                     7
#define CYGNUM_HAL_INTERRUPT_IRQ_IN_0                    8
#define CYGNUM_HAL_INTERRUPT_IRQ_IN_1                    9
#define CYGNUM_HAL_INTERRUPT_IRQ_IN_2                    10
#define CYGNUM_HAL_INTERRUPT_IRQ_IN_3                    11
#define CYGNUM_HAL_INTERRUPT_XBUS_CS_0                   12
#define CYGNUM_HAL_INTERRUPT_XBUS_CS_1                   13
#define CYGNUM_HAL_INTERRUPT_XBUS_CS_2                   14
#define CYGNUM_HAL_INTERRUPT_DOORBELL                    15
#define CYGNUM_HAL_INTERRUPT_DMA_1                       16
#define CYGNUM_HAL_INTERRUPT_DMA_2                       17
#define CYGNUM_HAL_INTERRUPT_PCI_IRQ                     18
#define CYGNUM_HAL_INTERRUPT_PMCSR                       19
#define CYGNUM_HAL_INTERRUPT_reserved20                  20
#define CYGNUM_HAL_INTERRUPT_reserved21                  21
#define CYGNUM_HAL_INTERRUPT_BIST                        22
#define CYGNUM_HAL_INTERRUPT_SERR                        23
#define CYGNUM_HAL_INTERRUPT_SDRAM_PARITY                24
#define CYGNUM_HAL_INTERRUPT_I2O_POST                    25
#define CYGNUM_HAL_INTERRUPT_reserved26                  26
#define CYGNUM_HAL_INTERRUPT_DISCARD_TIMER               27
#define CYGNUM_HAL_INTERRUPT_PCI_DATA_PARITY             28
#define CYGNUM_HAL_INTERRUPT_PCI_MASTER_ABORT            29
#define CYGNUM_HAL_INTERRUPT_PCI_TARGET_ABORT            30
#define CYGNUM_HAL_INTERRUPT_PCI_PARITY_ERROR            31
 
#define CYGNUM_HAL_ISR_MIN               0
#define CYGNUM_HAL_ISR_MAX              31
 
#define CYGNUM_HAL_ISR_COUNT            (CYGNUM_HAL_ISR_MAX+1)
 
// The vector used by the Real time clock
#define CYGNUM_HAL_INTERRUPT_RTC        CYGNUM_HAL_INTERRUPT_TIMER_3
 
 
//----------------------------------------------------------------------------
// Reset.
#include <cyg/hal/hal_ebsa285.h>        // registers
#include <cyg/hal/hal_io.h>             // IO macros
 
#define HAL_PLATFORM_RESET()                                               \
    CYG_MACRO_START                                                        \
    cyg_uint32 ctrl;                                                       \
                                                                           \
    /* If watchdog is already enabled, writing to timer4 has no effect. */ \
    /* But by disabling interupts and just hanging in the loop below    */ \
    /* the timer might run out eventually (not guaranteed).             */ \
    HAL_DISABLE_INTERRUPTS(ctrl);                                          \
                                                                           \
    /* Set timer4 (must be done before enabling watchdog) */               \
    HAL_WRITE_UINT32(SA110_TIMER4_LOAD, 2);                                \
    HAL_WRITE_UINT32(SA110_TIMER4_CONTROL, SA110_TIMER_CONTROL_ENABLE);    \
                                                                           \
    /* Enable watchdog */                                                  \
    HAL_READ_UINT32(SA110_CONTROL, ctrl);                                  \
    ctrl |= SA110_CONTROL_WATCHDOG;                                        \
    HAL_WRITE_UINT32(SA110_CONTROL, ctrl);                                 \
                                                                           \
    for(;;); /* wait for it */                                             \
    CYG_MACRO_END
 
#define HAL_PLATFORM_RESET_ENTRY 0x41000000
 
#endif // CYGONCE_HAL_PLATFORM_INTS_H
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.