Subversion Repositories openrisc

//=============================================================================
//
//      hal_priv.c
//
//      SPARClite Architecture sim-specific private variables
//
//=============================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   hmt
// Contributors:hmt
// Date:        1998-12-10
// Purpose:     private vars for SPARClite sim.
//              
//####DESCRIPTIONEND####
//
//=============================================================================
 
 
#include <pkgconf/system.h>
#include <pkgconf/hal.h>
#include <pkgconf/hal_sparclite.h>
#include <pkgconf/hal_sparclite_sleb.h>
 
#include <cyg/infra/cyg_type.h>
#include <cyg/hal/hal_intr.h>
#include <cyg/hal/hal_arch.h>
 
#ifdef CYGPKG_KERNEL
#include <pkgconf/kernel.h> // CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
#endif
 
#include <cyg/hal/hal_clock.h>
 
// ------------------------------------------------------------------------
// Clock static to keep period recorded.
cyg_int32 cyg_hal_sparclite_clock_period = 0;
 
/* Address of clock switch */
#define CLKSW_ADDR  0x01000003
 
#define HAL_SPARC_86940_TIMER1_CONTROL_INIT ( \
                0 |                           \
                HAL_SPARC_86940_TCR_CLKPRS |  \
                HAL_SPARC_86940_TCR_OUTLOW   )
                // Disable, CLKSEL=prescale(2), periodic interrupts, gate 0
                // and lower the output: OUTCTL = 2
 
#define HAL_SPARC_86940_TIMER1_CONTROL_ENABLE ( \
                HAL_SPARC_86940_TCR_CE |        \
                HAL_SPARC_86940_TCR_CLKPRS |    \
                HAL_SPARC_86940_TCR_OUTSAME   )
                // Enable + .... and no change to the output: OUTCTL = 0
 
void hal_clock_initialize( cyg_uint32 p )
{
    cyg_uint32 ints;
    cyg_uint32 clk;
    HAL_DISABLE_INTERRUPTS( ints );
 
    HAL_SPARC_86940_TIMER1_CONTROL_WRITE(
       HAL_SPARC_86940_TIMER1_CONTROL_INIT ); // Make sure it's disabled
 
    // Clear any pending interrupts:
    HAL_INTERRUPT_ACKNOWLEDGE( CYGNUM_HAL_INTERRUPT_RTC );
 
    clk = *(unsigned char *)CLKSW_ADDR;
    if (clk & 0x80)
        clk = 10;
 
    /* could be 10 - 62 MHz */
    clk = (clk & 0x3f);  /* in MHz */
    // BUT the 86940 is internally clocked at half that speed (page 20 RHS)
    clk >>= 1;
    // so the clock is now the number of system ticks we want per counter
    // tick...
    HAL_SPARC_86940_TIMER1_PRESCALER_WRITE(
        0 /* internal clock */    | 
        HAL_SPARC_86940_PRS_ODIV1 |
        clk );
    // should give 1MHz on the externally visible counter...
    HAL_SPARC_86940_TIMER1_CONTROL_WRITE(
                             HAL_SPARC_86940_TIMER1_CONTROL_INIT );
    HAL_SPARC_86940_TIMER1_RELOAD_WRITE( p );
    HAL_SPARC_86940_TIMER1_CONTROL_WRITE(
                             HAL_SPARC_86940_TIMER1_CONTROL_ENABLE );
    HAL_SPARC_86940_TIMER1_RELOAD_WRITE( p );
    cyg_hal_sparclite_clock_period = p;
    HAL_RESTORE_INTERRUPTS( ints );
}
 
// ------------------------------------------------------------------------
 
#ifdef CYG_HAL_USE_ROM_MONITOR_CYGMON
#include <cyg/hal/hal_cygm.h>           // CygMon vector table & layout
 
static struct { int eCosV, CygMonV; } setup[] = {
    { CYGNUM_HAL_VECTOR_OTHERS                , BSP_EXC_TRAP               },
    { CYGNUM_HAL_VECTOR_FETCH_ABORT           , BSP_EXC_IACCESS            },
    { CYGNUM_HAL_VECTOR_ILLEGAL_OP            , BSP_EXC_ILL                },
    { CYGNUM_HAL_VECTOR_PRIV_OP               , BSP_EXC_IPRIV              },
    { CYGNUM_HAL_VECTOR_UNALIGNED             , BSP_EXC_ALIGN              },
    { CYGNUM_HAL_VECTOR_DATA_ABORT            , BSP_EXC_DACCESS            },
};
 
#endif // CYG_HAL_USE_ROM_MONITOR_CYGMON
 
// ------------------------------------------------------------------------
// Board specific startups.
 
extern void hal_board_prestart( void );
extern void hal_board_poststart( void );
 
#define SLEB_LED (*(volatile char *)(0x02000003))
 
#define LED( _x_ ) SLEB_LED = (char)(0xff & ~(_x_))
 
void hal_board_prestart( void )
{
 
    LED( 0xc0 );
 
    // Disable default clocks &c
    HAL_SPARC_86940_TIMER1_PRESCALER_WRITE( 1 ); // as if at reset
    HAL_SPARC_86940_TIMER1_CONTROL_WRITE( 0 );   // as if at reset
 
#ifdef CYG_HAL_USE_ROM_MONITOR_CYGMON
    // then initialize our vectors to point to (or bounce to)
    // CygMon's equivalent functionality.
    {
        extern void hal_user_trap_to_cygmon_vsr( void );
        extern void hal_nofpcp_trap_to_cygmon_vsr( void );
        extern void hal_nmi_handler( void );
        int i;
 
        HAL_VSR_SET( CYGNUM_HAL_VECTOR_USER_TRAP,
                     (CYG_ADDRESS)hal_user_trap_to_cygmon_vsr, NULL );
 
        HAL_VSR_SET( CYGNUM_HAL_VECTOR_NOFPCP,
                     (CYG_ADDRESS)hal_nofpcp_trap_to_cygmon_vsr, NULL );
 
        for ( i = 0; i < sizeof(setup)/sizeof(setup[0]); i++ )
            HAL_VSR_SET( setup[i].eCosV,
                         CYGMON_VECTOR_TABLE[ setup[i].CygMonV ], NULL );
 
        // Just point this one straight though, and unmask it.
        // That way CygMon looks after ^Cs itself.
        HAL_VSR_SET( CYGNUM_HAL_VECTOR_INTERRUPT_10,
                     CYGMON_VECTOR_TABLE[ BSP_EXC_INT10 ], NULL );
        HAL_INTERRUPT_UNMASK( CYGNUM_HAL_VECTOR_INTERRUPT_10 );
 
        // Just point this one straight though, and unmask it.
        // That way CygMon looks after the Ethernet itself.
        HAL_VSR_SET( CYGNUM_HAL_VECTOR_INTERRUPT_14,
                     CYGMON_VECTOR_TABLE[ BSP_EXC_INT14 ], NULL );
        HAL_INTERRUPT_UNMASK( CYGNUM_HAL_VECTOR_INTERRUPT_14 );
 
        // Install handler for the NMI button on the board
        HAL_VSR_SET( CYGNUM_HAL_VECTOR_INTERRUPT_15,
                     (CYG_ADDRESS)hal_nmi_handler, NULL );
        HAL_INTERRUPT_UNMASK( CYGNUM_HAL_VECTOR_INTERRUPT_15 );
 
        LED( 0xc4 );
 
#ifdef CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
        {
            extern void patch_dbg_syscalls(void * vector);
            patch_dbg_syscalls( (void *)CYGMON_VECTOR_TABLE );
        }
#endif // CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
 
    }
#endif // CYG_HAL_USE_ROM_MONITOR_CYGMON
 
    LED( 0xc8 );
}
 
void hal_board_poststart( void )
{
    LED( 0xe0 );
    HAL_ENABLE_INTERRUPTS();
    LED( 0xf0 );
}
 
 
// EOF hal_priv.c