OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ARM7_LPC2368_Eclipse/] [RTOSDemo/] [main.c] - Rev 577

Compare with Previous | Blame | View Log

/*
    FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd.
 
    ***************************************************************************
    *                                                                         *
    * If you are:                                                             *
    *                                                                         *
    *    + New to FreeRTOS,                                                   *
    *    + Wanting to learn FreeRTOS or multitasking in general quickly       *
    *    + Looking for basic training,                                        *
    *    + Wanting to improve your FreeRTOS skills and productivity           *
    *                                                                         *
    * then take a look at the FreeRTOS books - available as PDF or paperback  *
    *                                                                         *
    *        "Using the FreeRTOS Real Time Kernel - a Practical Guide"        *
    *                  http://www.FreeRTOS.org/Documentation                  *
    *                                                                         *
    * A pdf reference manual is also available.  Both are usually delivered   *
    * to your inbox within 20 minutes to two hours when purchased between 8am *
    * and 8pm GMT (although please allow up to 24 hours in case of            *
    * exceptional circumstances).  Thank you for your support!                *
    *                                                                         *
    ***************************************************************************
 
    This file is part of the FreeRTOS distribution.
 
    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
    ***NOTE*** The exception to the GPL is included to allow you to distribute
    a combined work that includes FreeRTOS without being obliged to provide the
    source code for proprietary components outside of the FreeRTOS kernel.
    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
    more details. You should have received a copy of the GNU General Public 
    License and the FreeRTOS license exception along with FreeRTOS; if not it 
    can be viewed here: http://www.freertos.org/a00114.html and also obtained 
    by writing to Richard Barry, contact details for whom are available on the
    FreeRTOS WEB site.
 
    1 tab == 4 spaces!
 
    http://www.FreeRTOS.org - Documentation, latest information, license and
    contact details.
 
    http://www.SafeRTOS.com - A version that is certified for use in safety
    critical systems.
 
    http://www.OpenRTOS.com - Commercial support, development, porting,
    licensing and training services.
*/
 
/*
 * Creates all the demo application tasks, then starts the scheduler.  The WEB
 * documentation provides more details of the standard demo application tasks.
 * In addition to the standard demo tasks, the following tasks and tests are
 * defined and/or created within this file:
 *
 * "LCD" task - the LCD task is a 'gatekeeper' task.  It is the only task that
 * is permitted to access the display directly.  Other tasks wishing to write a
 * message to the LCD send the message on a queue to the LCD task instead of
 * accessing the LCD themselves.  The LCD task just blocks on the queue waiting
 * for messages - waking and displaying the messages as they arrive.
 *
 * "Check" hook -  This only executes every five seconds from the tick hook.
 * Its main function is to check that all the standard demo tasks are still 
 * operational.  Should any unexpected behaviour within a demo task be discovered 
 * the tick hook will write an error to the LCD (via the LCD task).  If all the 
 * demo tasks are executing with their expected behaviour then the check task 
 * writes PASS to the LCD (again via the LCD task), as described above.
 *
 * "uIP" task -  This is the task that handles the uIP stack.  All TCP/IP
 * processing is performed in this task.
 */
 
/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"
#include "semphr.h"
 
/* Demo app includes. */
#include "BlockQ.h"
#include "death.h"
#include "blocktim.h"
#include "LCD/portlcd.h"
#include "flash.h"
#include "partest.h"
#include "GenQTest.h"
#include "QPeek.h"
#include "dynamic.h"
 
/* Demo application definitions. */
#define mainQUEUE_SIZE						( 3 )
#define mainCHECK_DELAY						( ( portTickType ) 5000 / portTICK_RATE_MS )
#define mainBASIC_WEB_STACK_SIZE            ( configMINIMAL_STACK_SIZE * 6 )
 
/* Task priorities. */
#define mainQUEUE_POLL_PRIORITY				( tskIDLE_PRIORITY + 2 )
#define mainCHECK_TASK_PRIORITY				( tskIDLE_PRIORITY + 3 )
#define mainBLOCK_Q_PRIORITY				( tskIDLE_PRIORITY + 2 )
#define mainFLASH_PRIORITY                  ( tskIDLE_PRIORITY + 2 )
#define mainCREATOR_TASK_PRIORITY           ( tskIDLE_PRIORITY + 3 )
#define mainGEN_QUEUE_TASK_PRIORITY			( tskIDLE_PRIORITY ) 
 
/* Constants to setup the PLL. */
#define mainPLL_MUL			( ( unsigned portLONG ) ( 8 - 1 ) )
#define mainPLL_DIV			( ( unsigned portLONG ) 0x0000 )
#define mainCPU_CLK_DIV		( ( unsigned portLONG ) 0x0003 )
#define mainPLL_ENABLE		( ( unsigned portLONG ) 0x0001 )
#define mainPLL_CONNECT		( ( ( unsigned portLONG ) 0x0002 ) | mainPLL_ENABLE )
#define mainPLL_FEED_BYTE1	( ( unsigned portLONG ) 0xaa )
#define mainPLL_FEED_BYTE2	( ( unsigned portLONG ) 0x55 )
#define mainPLL_LOCK		( ( unsigned portLONG ) 0x4000000 )
#define mainPLL_CONNECTED	( ( unsigned portLONG ) 0x2000000 )
#define mainOSC_ENABLE		( ( unsigned portLONG ) 0x20 )
#define mainOSC_STAT		( ( unsigned portLONG ) 0x40 )
#define mainOSC_SELECT		( ( unsigned portLONG ) 0x01 )
 
/* Constants to setup the MAM. */
#define mainMAM_TIM_3		( ( unsigned portCHAR ) 0x03 )
#define mainMAM_MODE_FULL	( ( unsigned portCHAR ) 0x02 )
 
/* 
 * The task that handles the uIP stack.  All TCP/IP processing is performed in
 * this task.
 */
extern void vuIP_Task( void *pvParameters );
 
/*
 * The LCD is written two by more than one task so is controlled by a 
 * 'gatekeeper' task.  This is the only task that is actually permitted to 
 * access the LCD directly.  Other tasks wanting to display a message send
 * the message to the gatekeeper.
 */
static void vLCDTask( void *pvParameters );
 
/* Configure the hardware as required by the demo. */
static void prvSetupHardware( void );
 
/* The queue used to send messages to the LCD task. */
xQueueHandle xLCDQueue;
 
/*-----------------------------------------------------------*/
 
int main( void )
{
	prvSetupHardware();
 
	/* Create the queue used by the LCD task.  Messages for display on the LCD
	are received via this queue. */
	xLCDQueue = xQueueCreate( mainQUEUE_SIZE, sizeof( xLCDMessage ) );
 
	/* Create the uIP task.  This uses the lwIP RTOS abstraction layer.*/
    xTaskCreate( vuIP_Task, ( signed portCHAR * ) "uIP", mainBASIC_WEB_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );
 
	/* Start the standard demo tasks. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vCreateBlockTimeTasks();
    vStartLEDFlashTasks( mainFLASH_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
    vStartQueuePeekTasks();   
    vStartDynamicPriorityTasks();
 
	/* Start the tasks defined within this file/specific to this demo. */
	xTaskCreate( vLCDTask, ( signed portCHAR * ) "LCD", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );
 
	/* Start the scheduler. */
	vTaskStartScheduler();
 
    /* Will only get here if there was insufficient memory to create the idle
    task. */
	return 0; 
}
/*-----------------------------------------------------------*/
 
void vApplicationTickHook( void )
{
unsigned portBASE_TYPE uxColumn = 0;
static xLCDMessage xMessage = { 0, "PASS" };
static unsigned portLONG ulTicksSinceLastDisplay = 0;
static portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
 
	/* Called from every tick interrupt.  Have enough ticks passed to make it
	time to perform our health status check again? */
	ulTicksSinceLastDisplay++;
	if( ulTicksSinceLastDisplay >= mainCHECK_DELAY )
	{
		ulTicksSinceLastDisplay = 0;
 
		/* Has an error been found in any task? */
 
        if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR - BLOCKQ";
		}
 
		if( xAreBlockTimeTestTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR - BLOCKTIM";
		}
 
		if( xAreGenericQueueTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR - GENQ";
		}
 
		if( xAreQueuePeekTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR - PEEKQ";
		}       
 
		if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
		{
			xMessage.pcMessage = "ERROR - DYNAMIC";
		}
 
        xMessage.xColumn++;
 
		/* Send the message to the LCD gatekeeper for display. */
		xHigherPriorityTaskWoken = pdFALSE;
		xQueueSendToBackFromISR( xLCDQueue, &xMessage, &xHigherPriorityTaskWoken );
	}
}
/*-----------------------------------------------------------*/
 
void vLCDTask( void *pvParameters )
{
xLCDMessage xMessage;
 
	/* Initialise the LCD and display a startup message. */
	LCD_init();
	LCD_cur_off();
    LCD_cls();    
    LCD_gotoxy( 1, 1 );
    LCD_puts( "www.FreeRTOS.org" );
 
	for( ;; )
	{
		/* Wait for a message to arrive that requires displaying. */
		while( xQueueReceive( xLCDQueue, &xMessage, portMAX_DELAY ) != pdPASS );
 
		/* Display the message.  Print each message to a different position. */
		LCD_cls();
		LCD_gotoxy( ( xMessage.xColumn & 0x07 ) + 1, ( xMessage.xColumn & 0x01 ) + 1 );
		LCD_puts( xMessage.pcMessage );
	}
 
}
/*-----------------------------------------------------------*/
 
static void prvSetupHardware( void )
{
	#ifdef RUN_FROM_RAM
		/* Remap the interrupt vectors to RAM if we are are running from RAM. */
		SCB_MEMMAP = 2;
	#endif
 
	/* Disable the PLL. */
	PLLCON = 0;
	PLLFEED = mainPLL_FEED_BYTE1;
	PLLFEED = mainPLL_FEED_BYTE2;
 
	/* Configure clock source. */
	SCS |= mainOSC_ENABLE;
	while( !( SCS & mainOSC_STAT ) );
	CLKSRCSEL = mainOSC_SELECT; 
 
	/* Setup the PLL to multiply the XTAL input by 4. */
	PLLCFG = ( mainPLL_MUL | mainPLL_DIV );
	PLLFEED = mainPLL_FEED_BYTE1;
	PLLFEED = mainPLL_FEED_BYTE2;
 
	/* Turn on and wait for the PLL to lock... */
	PLLCON = mainPLL_ENABLE;
	PLLFEED = mainPLL_FEED_BYTE1;
	PLLFEED = mainPLL_FEED_BYTE2;
	CCLKCFG = mainCPU_CLK_DIV;	
	while( !( PLLSTAT & mainPLL_LOCK ) );
 
	/* Connecting the clock. */
	PLLCON = mainPLL_CONNECT;
	PLLFEED = mainPLL_FEED_BYTE1;
	PLLFEED = mainPLL_FEED_BYTE2;
	while( !( PLLSTAT & mainPLL_CONNECTED ) ); 
 
	/* 
	This code is commented out as the MAM does not work on the original revision
	LPC2368 chips.  If using Rev B chips then you can increase the speed though
	the use of the MAM.
 
	Setup and turn on the MAM.  Three cycle access is used due to the fast
	PLL used.  It is possible faster overall performance could be obtained by
	tuning the MAM and PLL settings.
	MAMCR = 0;
	MAMTIM = mainMAM_TIM_3;
	MAMCR = mainMAM_MODE_FULL;
	*/
 
	/* Setup the led's on the MCB2300 board */
	vParTestInitialise();
}
 
 
 
 
 
 
 
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.