URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [AVR32_UC3/] [AT32UC3B/] [GCC/] [Makefile] - Rev 593
Go to most recent revision | Compare with Previous | Blame | View Log
# Hey Emacs, this is a -*- makefile -*-
# Goals available on make command line:
#
# [all] Default goal: build the project.
# clean Clean up the project.
# rebuild Rebuild the project.
# ccversion Display CC version information.
# cppfiles file.i Generate preprocessed files from C source files.
# asfiles file.x Generate preprocessed assembler files from C and assembler source files.
# objfiles file.o Generate object files from C and assembler source files.
# a file.a Archive: create A output file from object files.
# elf file.elf Link: create ELF output file from object files.
# lss file.lss Create extended listing from target output file.
# sym file.sym Create symbol table from target output file.
# hex file.hex Create Intel HEX image from ELF output file.
# bin file.bin Create binary image from ELF output file.
# sizes Display target size information.
# isp Use ISP instead of JTAGICE mkII when programming.
# cpuinfo Get CPU information.
# halt Stop CPU execution.
# chiperase Perform a JTAG Chip Erase command.
# erase Perform a flash chip erase.
# program Program MCU memory from ELF output file.
# secureflash Protect chip by setting security bit.
# reset Reset MCU.
# debug Open a debug connection with the MCU.
# run Start CPU execution.
# readregs Read CPU registers.
# doc Build the documentation.
# cleandoc Clean up the documentation.
# rebuilddoc Rebuild the documentation.
# verbose Display main executed commands.
# Copyright (c) 2007, Atmel Corporation All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation and/
# or other materials provided with the distribution.
#
# 3. The name of ATMEL may not be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
# SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
# OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# ** ** ** *** ** ** ** ** ** ** ** ** ** ** **
# ENVIRONMENT SETTINGS
# ** ** ** *** ** ** ** ** ** ** ** ** ** ** **
FirstWord = $(if $(1),$(word 1,$(1)))
LastWord = $(if $(1),$(word $(words $(1)),$(1)))
MAKE = make
MAKECFG = config.mk
TGTTYPE = $(suffix $(TARGET))
RM = rm -Rf
AR = avr32-ar
ARFLAGS = rcs
CPP = $(CC) -E
CPPFLAGS = -march=$(ARCH) -mpart=$(PART) $(WARNINGS) $(DEFS) \
$(PLATFORM_INC_PATH:%=-I%) $(INC_PATH:%=-I%) $(CPP_EXTRA_FLAGS)
DPNDFILES = $(CSRCS:.c=.d) $(ASSRCS:.S=.d)
CPPFILES = $(CSRCS:.c=.i)
CC = avr32-gcc
CFLAGS = $(DEBUG) $(OPTIMIZATION) $(C_EXTRA_FLAGS) \
$(PLATFORM_INC_PATH:%=-Wa,-I%) $(INC_PATH:%=-Wa,-I%) $(AS_EXTRA_FLAGS)
ASFILES = $(CSRCS:.c=.x) $(ASSRCS:.S=.x)
AS = avr32-as
ASFLAGS = $(DEBUG) \
$(PLATFORM_INC_PATH:%=-Wa,-I%) $(INC_PATH:%=-Wa,-I%) $(AS_EXTRA_FLAGS)
OBJFILES = $(CSRCS:.c=.o) $(ASSRCS:.S=.o)
LD = avr32-ld
LDFLAGS = -march=$(ARCH) -mpart=$(PART) \
$(LIB_PATH:%=-L%) $(LINKER_SCRIPT:%=-T%) $(LD_EXTRA_FLAGS)
LOADLIBES =
LDLIBS = $(LIBS:%=-l%)
OBJDUMP = avr32-objdump
LSS = $(TARGET:$(TGTTYPE)=.lss)
NM = avr32-nm
SYM = $(TARGET:$(TGTTYPE)=.sym)
OBJCOPY = avr32-objcopy
HEX = $(TARGET:$(TGTTYPE)=.hex)
BIN = $(TARGET:$(TGTTYPE)=.bin)
SIZE = avr32-size
SLEEP = sleep
SLEEPUSB = 9
PROGRAM = avr32program
ISP = batchisp
ISPFLAGS = -device at32$(PART) -hardware usb -operation
DBGPROXY = avr32gdbproxy
DOCGEN = doxygen
# ** ** ** *** ** ** ** ** ** ** ** ** ** ** **
# MESSAGES
# ** ** ** *** ** ** ** ** ** ** ** ** ** ** **
ERR_TARGET_TYPE = Target type not supported: `$(TGTTYPE)'
MSG_CLEANING = Cleaning project.
MSG_PREPROCESSING = Preprocessing \`$<\' to \`$@\'.
MSG_COMPILING = Compiling \`$<\' to \`$@\'.
MSG_ASSEMBLING = Assembling \`$<\' to \`$@\'.
MSG_ARCHIVING = Archiving to \`$@\'.
MSG_LINKING = Linking to \`$@\'.
MSG_EXTENDED_LISTING = Creating extended listing to \`$@\'.
MSG_SYMBOL_TABLE = Creating symbol table to \`$@\'.
MSG_IHEX_IMAGE = Creating Intel HEX image to \`$@\'.
MSG_BINARY_IMAGE = Creating binary image to \`$@\'.
MSG_GETTING_CPU_INFO = Getting CPU information.
MSG_HALTING = Stopping CPU execution.
MSG_ERASING_CHIP = Performing a JTAG Chip Erase command.
MSG_ERASING = Performing a flash chip erase.
MSG_PROGRAMMING = Programming MCU memory from \`$(TARGET)\'.
MSG_SECURING_FLASH = Protecting chip by setting security bit.
MSG_RESETTING = Resetting MCU.
MSG_DEBUGGING = Opening debug connection with MCU.
MSG_RUNNING = Starting CPU execution.
MSG_READING_CPU_REGS = Reading CPU registers.
MSG_CLEANING_DOC = Cleaning documentation.
MSG_GENERATING_DOC = Generating documentation to \`$(DOC_PATH)\'.
# ** ** ** *** ** ** ** ** ** ** ** ** ** ** **
# MAKE RULES
# ** ** ** *** ** ** ** ** ** ** ** ** ** ** **
# Include the make configuration file.
include $(MAKECFG)
# ** ** TOP-LEVEL RULES ** **
# Default goal: build the project.
ifeq ($(TGTTYPE),.a)
.PHONY: all
all: ccversion a lss sym sizes
else
ifeq ($(TGTTYPE),.elf)
.PHONY: all
all: ccversion elf lss sym hex bin sizes
else
$(error $(ERR_TARGET_TYPE))
endif
endif
# Clean up the project.
.PHONY: clean
clean:
@echo $(MSG_CLEANING)
-$(VERBOSE_CMD)$(RM) $(BIN)
-$(VERBOSE_CMD)$(RM) $(HEX)
-$(VERBOSE_CMD)$(RM) $(SYM)
-$(VERBOSE_CMD)$(RM) $(LSS)
-$(VERBOSE_CMD)$(RM) $(TARGET)
-$(VERBOSE_CMD)$(RM) $(OBJFILES)
-$(VERBOSE_CMD)$(RM) $(ASFILES)
-$(VERBOSE_CMD)$(RM) $(CPPFILES)
-$(VERBOSE_CMD)$(RM) $(DPNDFILES)
$(VERBOSE_NL)
# Rebuild the project.
.PHONY: rebuild
rebuild: clean all
# Display CC version information.
.PHONY: ccversion
ccversion:
@echo
@echo
@$(CC) --version
# Generate preprocessed files from C source files.
.PHONY: cppfiles
cppfiles: $(CPPFILES)
# Generate preprocessed assembler files from C and assembler source files.
.PHONY: asfiles
asfiles: $(ASFILES)
# Generate object files from C and assembler source files.
.PHONY: objfiles
objfiles: $(OBJFILES)
ifeq ($(TGTTYPE),.a)
# Archive: create A output file from object files.
.PHONY: a
a: $(TARGET)
else
ifeq ($(TGTTYPE),.elf)
# Link: create ELF output file from object files.
.PHONY: elf
elf: $(TARGET)
endif
endif
# Create extended listing from target output file.
.PHONY: lss
lss: $(LSS)
# Create symbol table from target output file.
.PHONY: sym
sym: $(SYM)
ifeq ($(TGTTYPE),.elf)
# Create Intel HEX image from ELF output file.
.PHONY: hex
hex: $(HEX)
# Create binary image from ELF output file.
.PHONY: bin
bin: $(BIN)
endif
# Display target size information.
.PHONY: sizes
sizes: $(TARGET)
@echo
@echo
ifeq ($(TGTTYPE),.a)
@$(SIZE) -Bxt $<
else
ifeq ($(TGTTYPE),.elf)
@$(SIZE) -Ax $<
@$(SIZE) -Bx $<
endif
endif
@echo
@echo
ifeq ($(TGTTYPE),.elf)
# Use ISP instead of JTAGICE mkII when programming.
.PHONY: isp
ifeq ($(filter-out isp verbose,$(MAKECMDGOALS)),)
isp: all
else
isp:
@:
endif
ifeq ($(findstring isp,$(MAKECMDGOALS)),)
# Get CPU information.
.PHONY: cpuinfo
cpuinfo:
@echo
@echo $(MSG_GETTING_CPU_INFO)
$(VERBOSE_CMD)$(PROGRAM) cpuinfo
ifneq ($(call LastWord,$(filter cpuinfo chiperase erase program secureflash reset debug run readregs,$(MAKECMDGOALS))),cpuinfo)
@$(SLEEP) $(SLEEPUSB)
else
@echo
endif
# Stop CPU execution.
.PHONY: halt
halt:
ifeq ($(filter cpuinfo chiperase erase program secureflash reset run readregs,$(MAKECMDGOALS)),)
@echo
@echo $(MSG_HALTING)
$(VERBOSE_CMD)$(PROGRAM) halt
ifneq ($(call LastWord,$(filter halt debug,$(MAKECMDGOALS))),halt)
@$(SLEEP) $(SLEEPUSB)
else
@echo
endif
else
@:
endif
# Perform a JTAG Chip Erase command.
.PHONY: chiperase
chiperase:
@echo
@echo $(MSG_ERASING_CHIP)
$(VERBOSE_CMD)$(PROGRAM) chiperase
ifneq ($(call LastWord,$(filter cpuinfo chiperase program secureflash reset debug run readregs,$(MAKECMDGOALS))),chiperase)
@$(SLEEP) $(SLEEPUSB)
else
@echo
endif
# Perform a flash chip erase.
.PHONY: erase
erase:
ifeq ($(filter chiperase program,$(MAKECMDGOALS)),)
@echo
@echo $(MSG_ERASING)
$(VERBOSE_CMD)$(PROGRAM) erase $(FLASH:%=-f%)
ifneq ($(call LastWord,$(filter cpuinfo erase secureflash reset debug run readregs,$(MAKECMDGOALS))),erase)
@$(SLEEP) $(SLEEPUSB)
else
@echo
endif
else
@:
endif
# Program MCU memory from ELF output file.
.PHONY: program
program: all
@echo
@echo $(MSG_PROGRAMMING)
$(VERBOSE_CMD)$(PROGRAM) program $(FLASH:%=-f%) $(PROG_CLOCK:%=-c%) -e -v -R $(if $(findstring run,$(MAKECMDGOALS)),-r) $(TARGET)
ifneq ($(call LastWord,$(filter cpuinfo chiperase program secureflash debug readregs,$(MAKECMDGOALS))),program)
@$(SLEEP) $(SLEEPUSB)
else
@echo
endif
# Protect chip by setting security bit.
.PHONY: secureflash
secureflash:
@echo
@echo $(MSG_SECURING_FLASH)
$(VERBOSE_CMD)$(PROGRAM) secureflash
ifneq ($(call LastWord,$(filter cpuinfo chiperase erase program secureflash reset debug run readregs,$(MAKECMDGOALS))),secureflash)
@$(SLEEP) $(SLEEPUSB)
else
@echo
endif
# Reset MCU.
.PHONY: reset
reset:
ifeq ($(filter program run,$(MAKECMDGOALS)),)
@echo
@echo $(MSG_RESETTING)
$(VERBOSE_CMD)$(PROGRAM) reset
ifneq ($(call LastWord,$(filter cpuinfo chiperase erase secureflash reset debug readregs,$(MAKECMDGOALS))),reset)
@$(SLEEP) $(SLEEPUSB)
else
@echo
endif
else
@:
endif
# Open a debug connection with the MCU.
.PHONY: debug
debug:
@echo
@echo $(MSG_DEBUGGING)
$(VERBOSE_CMD)$(DBGPROXY) $(FLASH:%=-f%)
ifneq ($(call LastWord,$(filter cpuinfo halt chiperase erase program secureflash reset debug run readregs,$(MAKECMDGOALS))),debug)
@$(SLEEP) $(SLEEPUSB)
else
@echo
endif
# Start CPU execution.
.PHONY: run
run:
ifeq ($(findstring program,$(MAKECMDGOALS)),)
@echo
@echo $(MSG_RUNNING)
$(VERBOSE_CMD)$(PROGRAM) run $(if $(findstring reset,$(MAKECMDGOALS)),-R)
ifneq ($(call LastWord,$(filter cpuinfo chiperase erase secureflash debug run readregs,$(MAKECMDGOALS))),run)
@$(SLEEP) $(SLEEPUSB)
else
@echo
endif
else
@:
endif
# Read CPU registers.
.PHONY: readregs
readregs:
@echo
@echo $(MSG_READING_CPU_REGS)
$(VERBOSE_CMD)$(PROGRAM) readregs
ifneq ($(call LastWord,$(filter cpuinfo chiperase erase program secureflash reset debug run readregs,$(MAKECMDGOALS))),readregs)
@$(SLEEP) $(SLEEPUSB)
else
@echo
endif
else
# Perform a flash chip erase.
.PHONY: erase
erase:
ifeq ($(findstring program,$(MAKECMDGOALS)),)
@echo
@echo $(MSG_ERASING)
$(VERBOSE_CMD)$(ISP) $(ISPFLAGS) erase f memory flash blankcheck
ifeq ($(call LastWord,$(filter erase secureflash debug run,$(MAKECMDGOALS))),erase)
@echo
endif
else
@:
endif
# Program MCU memory from ELF output file.
.PHONY: program
program: all
@echo
@echo $(MSG_PROGRAMMING)
$(VERBOSE_CMD)$(ISP) $(ISPFLAGS) erase f memory flash blankcheck loadbuffer $(TARGET) program verify $(if $(findstring run,$(MAKECMDGOALS)),$(if $(findstring secureflash,$(MAKECMDGOALS)),,start $(if $(findstring reset,$(MAKECMDGOALS)),,no)reset 0))
ifeq ($(call LastWord,$(filter program secureflash debug,$(MAKECMDGOALS))),program)
@echo
endif
# Protect chip by setting security bit.
.PHONY: secureflash
secureflash:
@echo
@echo $(MSG_SECURING_FLASH)
$(VERBOSE_CMD)$(ISP) $(ISPFLAGS) memory security addrange 0x0 0x0 fillbuffer 0x01 program $(if $(findstring run,$(MAKECMDGOALS)),start $(if $(findstring reset,$(MAKECMDGOALS)),,no)reset 0)
ifeq ($(call LastWord,$(filter erase program secureflash debug,$(MAKECMDGOALS))),secureflash)
@echo
endif
# Reset MCU.
.PHONY: reset
reset:
@:
# Open a debug connection with the MCU.
.PHONY: debug
debug:
@echo
@echo $(MSG_DEBUGGING)
$(VERBOSE_CMD)$(DBGPROXY) $(FLASH:%=-f%)
ifeq ($(call LastWord,$(filter erase program secureflash debug run,$(MAKECMDGOALS))),debug)
@echo
endif
# Start CPU execution.
.PHONY: run
run:
ifeq ($(filter program secureflash,$(MAKECMDGOALS)),)
@echo
@echo $(MSG_RUNNING)
$(VERBOSE_CMD)$(ISP) $(ISPFLAGS) start $(if $(findstring reset,$(MAKECMDGOALS)),,no)reset 0
ifeq ($(call LastWord,$(filter erase debug run,$(MAKECMDGOALS))),run)
@echo
endif
else
@:
endif
endif
endif
# Build the documentation.
.PHONY: doc
doc:
@echo
@echo $(MSG_GENERATING_DOC)
$(VERBOSE_CMD)cd $(dir $(DOC_CFG)) && $(DOCGEN) $(notdir $(DOC_CFG))
@echo
# Clean up the documentation.
.PHONY: cleandoc
cleandoc:
@echo $(MSG_CLEANING_DOC)
-$(VERBOSE_CMD)$(RM) $(DOC_PATH)
$(VERBOSE_NL)
# Rebuild the documentation.
.PHONY: rebuilddoc
rebuilddoc: cleandoc doc
# Display main executed commands.
.PHONY: verbose
ifeq ($(filter-out isp verbose,$(MAKECMDGOALS)),)
verbose: all
else
verbose:
@:
endif
ifneq ($(findstring verbose,$(MAKECMDGOALS)),)
# Prefix displaying the following command if and only if verbose is a goal.
VERBOSE_CMD =
# New line displayed if and only if verbose is a goal.
VERBOSE_NL = @echo
else
VERBOSE_CMD = @
VERBOSE_NL =
endif
# ** ** COMPILATION RULES ** **
# Include silently the dependency files.
-include $(DPNDFILES)
# The dependency files are not built alone but along with first generation files.
$(DPNDFILES):
# First generation files depend on make files.
$(CPPFILES) $(ASFILES) $(OBJFILES): Makefile $(MAKECFG)
ifeq ($(TGTTYPE),.elf)
# Files resulting from linking depend on linker script.
$(TARGET): $(LINKER_SCRIPT)
endif
# Preprocess: create preprocessed files from C source files.
%.i: %.c %.d
@echo $(MSG_PREPROCESSING)
$(VERBOSE_CMD)$(CPP) $(CPPFLAGS) -MD -MP -MT '$*.i $*.x $*.o' -o $@ $<
@touch $*.d
@touch $@
$(VERBOSE_NL)
# Preprocess & compile: create assembler files from C source files.
%.x: %.c %.d
@echo $(MSG_COMPILING)
$(VERBOSE_CMD)$(CC) -S $(CPPFLAGS) -MD -MP -MT '$*.i $*.o' $(CFLAGS) -o $@ $<
@touch $*.d
@touch $@
$(VERBOSE_NL)
# Preprocess: create preprocessed files from assembler source files.
%.x: %.S %.d
@echo $(MSG_PREPROCESSING)
$(VERBOSE_CMD)$(CPP) $(CPPFLAGS) -MD -MP -MT '$*.x $*.o' -o $@ $<
@touch $*.d
@touch $@
$(VERBOSE_NL)
# Preprocess, compile & assemble: create object files from C source files.
%.o: %.c %.d
@echo $(MSG_COMPILING)
$(VERBOSE_CMD)$(CC) -c $(CPPFLAGS) -MD -MP -MT '$*.i $*.x' $(CFLAGS) -o $@ $<
@touch $*.d
@touch $@
$(VERBOSE_NL)
# Preprocess & assemble: create object files from assembler source files.
%.o: %.S %.d
@echo $(MSG_ASSEMBLING)
$(VERBOSE_CMD)$(CC) -c $(CPPFLAGS) -MD -MP -MT '$*.x' $(ASFLAGS) -o $@ $<
@touch $*.d
@touch $@
$(VERBOSE_NL)
.PRECIOUS: $(OBJFILES)
ifeq ($(TGTTYPE),.a)
# Archive: create A output file from object files.
.SECONDARY: $(TARGET)
$(TARGET): $(OBJFILES)
@echo $(MSG_ARCHIVING)
$(VERBOSE_CMD)$(AR) $(ARFLAGS) $@ $(filter %.o,$+)
$(VERBOSE_NL)
else
ifeq ($(TGTTYPE),.elf)
# Link: create ELF output file from object files.
.SECONDARY: $(TARGET)
$(TARGET): $(OBJFILES)
@echo $(MSG_LINKING)
$(VERBOSE_CMD)$(CC) $(LDFLAGS) $(filter %.o,$+) $(LOADLIBES) $(LDLIBS) -o $@
$(VERBOSE_NL)
endif
endif
# Create extended listing from target output file.
$(LSS): $(TARGET)
@echo $(MSG_EXTENDED_LISTING)
$(VERBOSE_CMD)$(OBJDUMP) -h -S $< > $@
$(VERBOSE_NL)
# Create symbol table from target output file.
$(SYM): $(TARGET)
@echo $(MSG_SYMBOL_TABLE)
$(VERBOSE_CMD)$(NM) -n $< > $@
$(VERBOSE_NL)
ifeq ($(TGTTYPE),.elf)
# Create Intel HEX image from ELF output file.
$(HEX): $(TARGET)
@echo $(MSG_IHEX_IMAGE)
$(VERBOSE_CMD)$(OBJCOPY) -O ihex $< $@
$(VERBOSE_NL)
# Create binary image from ELF output file.
$(BIN): $(TARGET)
@echo $(MSG_BINARY_IMAGE)
$(VERBOSE_CMD)$(OBJCOPY) -O binary $< $@
$(VERBOSE_NL)
endif
Go to most recent revision | Compare with Previous | Blame | View Log