URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [CORTEX_LPC1768_GCC_RedSuite/] [src/] [LCD/] [lcd_commands.h] - Rev 581
Compare with Previous | Blame | View Log
//***************************************************************************** // +--+ // | ++----+ // +-++ | // | | // +-+--+ | // | +--+--+ // +----+ Copyright (c) 2009 Code Red Technologies Ltd. // // lcd_commands.h contains defines mapping onto the commands accepted by the // Sitronix ST7637 LCD Controller/driver used on the RDB1768 development board.// // // Software License Agreement // // The software is owned by Code Red Technologies and/or its suppliers, and is // protected under applicable copyright laws. All rights are reserved. Any // use in violation of the foregoing restrictions may subject the user to criminal // sanctions under applicable laws, as well as to civil liability for the breach // of the terms and conditions of this license. // // THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED // OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF // MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. // USE OF THIS SOFTWARE FOR COMMERCIAL DEVELOPMENT AND/OR EDUCATION IS SUBJECT // TO A CURRENT END USER LICENSE AGREEMENT (COMMERCIAL OR EDUCATIONAL) WITH // CODE RED TECHNOLOGIES LTD. #ifndef LCD_COMMANDS_H_ #define LCD_COMMANDS_H_ #define DD_NOP 0x00 #define DD_SWRESET 0x01 //SW reset the display #define DD_SLPIN 0x10 //Sleep in and booster off #define DD_SLPOUT 0x11 //Sleep out and booster on #define DD_NORON 0x13 //Partial mode off (Normal mode on) #define DD_DISPOFF 0x28 //Display Off #define DD_DISPON 0x29 //Display On #define DD_CASET 0x2a //Column address set #define DD_RASET 0x2b //Row address set #define DD_RAMWR 0x2c //Memory write #define DD_MADCTR 0x36 //Memory Data Access Control #define DD_COLORMOD 0x3a //Set the color mode for the display #define DD_ColScanDir 0xb7 //Set the column scanning direction #define DD_VopSet 0xc0 //LCD supply voltage set #define DD_BiasSel 0xc3 //Bias selection #define DD_BstMbpXSel 0xc4 //Booster setting #define DD_AUTOLOADSET 0xd7 //Control auto load of ROM data #define DD_EPCTIN 0xe0 //OTP control RD/WR #define DD_EPREAD 0xe3 //OTP read #define DD_EPCTOUT 0xe1 //OTP control cancel #endif /*LCD_COMMANDS_H_*/