URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [freertos-6.1.1/] [Demo/] [ColdFire_MCF52233_Eclipse/] [RTOSDemo/] [webserver/] [eth_phy.h] - Rev 611
Go to most recent revision | Compare with Previous | Blame | View Log
/*! * \file eth.h * \brief Definitions for Ethernet Physical Layer Interface * \version $Revision: 2 $ * \author Michael Norman */ #ifndef _ETH_PHY_H #define _ETH_PHY_H /*******************************************************************/ int eth_phy_autoneg(int phy_addr, MII_SPEED speed, MII_DUPLEX duplex); int eth_phy_manual(int phy_addr, MII_SPEED speed, MII_DUPLEX duplex, int loop); int eth_phy_get_speed(int, int*); int eth_phy_get_duplex(int, int*); int eth_phy_reg_dump(int); /*******************************************************************/ /* MII Register Addresses */ #define PHY_BMCR (0x00) #define PHY_BMSR (0x01) #define PHY_PHYIDR1 (0x02) #define PHY_PHYIDR2 (0x03) #define PHY_ANAR (0x04) #define PHY_ANLPAR (0x05) /* Bit definitions and macros for PHY_CTRL */ #define PHY_BMCR_RESET (0x8000) #define PHY_BMCR_LOOP (0x4000) #define PHY_BMCR_SPEED (0x2000) #define PHY_BMCR_AN_ENABLE (0x1000) #define PHY_BMCR_POWERDOWN (0x0800) #define PHY_BMCR_ISOLATE (0x0400) #define PHY_BMCR_AN_RESTART (0x0200) #define PHY_BMCR_FDX (0x0100) #define PHY_BMCR_COL_TEST (0x0080) /* Bit definitions and macros for PHY_STAT */ #define PHY_BMSR_100BT4 (0x8000) #define PHY_BMSR_100BTX_FDX (0x4000) #define PHY_BMSR_100BTX (0x2000) #define PHY_BMSR_10BT_FDX (0x1000) #define PHY_BMSR_10BT (0x0800) #define PHY_BMSR_NO_PREAMBLE (0x0040) #define PHY_BMSR_AN_COMPLETE (0x0020) #define PHY_BMSR_REMOTE_FAULT (0x0010) #define PHY_BMSR_AN_ABILITY (0x0008) #define PHY_BMSR_LINK (0x0004) #define PHY_BMSR_JABBER (0x0002) #define PHY_BMSR_EXTENDED (0x0001) /* Bit definitions and macros for PHY_AN_ADV */ #define PHY_ANAR_NEXT_PAGE (0x8001) #define PHY_ANAR_REM_FAULT (0x2001) #define PHY_ANAR_PAUSE (0x0401) #define PHY_ANAR_100BT4 (0x0201) #define PHY_ANAR_100BTX_FDX (0x0101) #define PHY_ANAR_100BTX (0x0081) #define PHY_ANAR_10BT_FDX (0x0041) #define PHY_ANAR_10BT (0x0021) #define PHY_ANAR_802_3 (0x0001) /* Bit definitions and macros for PHY_AN_LINK_PAR */ #define PHY_ANLPAR_NEXT_PAGE (0x8000) #define PHY_ANLPAR_ACK (0x4000) #define PHY_ANLPAR_REM_FAULT (0x2000) #define PHY_ANLPAR_PAUSE (0x0400) #define PHY_ANLPAR_100BT4 (0x0200) #define PHY_ANLPAR_100BTX_FDX (0x0100) #define PHY_ANLPAR_100BTX (0x0080) #define PHY_ANLPAR_10BTX_FDX (0x0040) #define PHY_ANLPAR_10BT (0x0020) /*******************************************************************/ #endif /* _ETH_PHY_H */
Go to most recent revision | Compare with Previous | Blame | View Log