OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.3/] [readline/] [CHANGELOG] - Rev 1773

Go to most recent revision | Compare with Previous | Blame | View Log

[Readline-specific changelog.  Descriptions of changes to the source are
 found in the bash changelog.]

                                    6/9
                                    ---
Makefile.in
        - quote value of ${INSTALL_DATA} when passing it to makes in
          subdirectories

                                    7/1
                                    ---
Makefile.in
        - don't pass INSTALL_DATA to a make in the `doc' subdirectory; let
          autoconf set the value itself in the Makefile
        - removed a stray `-' before $(RANLIB) in the `install' recipe

doc/Makefile.in
        - add a VPATH assignment so the documentation is not remade if it's
          already up-to-date in the distribution

configure.in
        - call AC_SUBST(LOCAL_LDFLAGS), since Makefile.in contains
          @LOCAL_LDFLAGS@

                                    7/9
                                    ---

config.h.in
        - add define lines for STRUCT_WINSIZE_IN_SYS_IOCTL and
          STRUCT_WINSIZE_IN_TERMIOS

configure.in
        - call BASH_STRUCT_WINSIZE to look for the definition of
          `struct winsize'

                                   7/17
                                   ----
configure.in
        - call AC_MINIX

config.h.in
        - add define line for AC_MINIX

                                   7/18
                                   ----
Makefile.in
        - add `install-shared' and `uninstall-shared' targets

                                    8/4
                                    ---
Makefile.in
        - install and uninstall libhistory.a in the `install' and
          `uninstall' targets

                                    9/4
                                    ---
configure.in
        - bumped LIBVERSION up to 2.1.1, indicating that this is patch
          level 1 to release 2.1


                                   9/16
                                   ----
Makefile.in
        - `make distclean' now descends into the `examples' subdir

doc/Makefile.in
        - the `distclean' and `maintainer-clean' targets should remove
          Makefile

examples/Makefile.in
        - added the various clean targets

                                    4/2
                                    ---
configure.in
        - bumped LIBVERSION up to 2.2

                                   4/18
                                   ----
[readline-2.2 released]

                                   4/20
                                   ----
Makefile.in
        - make `libhistory.a' a dependency of `install'
        - fixed a typo in the recipe for `install' that copied libreadline.a
          to libhistory.old right after installing it

                                   4/27
                                   ----
doc/Makefile.in
        - install {readline,history}.info out of the source directory if
          they are not found in the current (build) directory -- only an
          issue if the libraries are built in a different directory than
          the source directory

                                    5/1
                                    ---
support/shobj-conf
        - script from the bash distribution to do shared object and library
          configuration

shlib/Makefile.in
        - new directory and makefile to handle building shared versions of
          libreadline and libhistory, controlled by support/shobj-conf

                                    5/7
                                    ---
doc/Makefile.in
        - set SHELL to /bin/sh, rather than relying on make to be correct

                                   5/14
                                   ----
savestring.c
        - new file, moved from shell.c, for backwards compatibility

Makefile.in, shlib/Makefile.in
        - make sure savestring.c is compiled and added to libreadline and
          libhistory

[THERE ARE NO MORE #ifdef SHELL LINES IN THE C SOURCE FILES.]

                                   5/15
                                   ----
README
        - updated description of shared library creation for the new scheme

[THERE ARE NO MORE #ifdef SHELL LINES IN ANY OF THE SOURCE FILES.]

Makefile.in
        - bumped SHLIB_MAJOR up to 4 since we've augmented the library
          API
        - rlconf.h is now one of the installed headers, so applications can
          find out whether things like vi-mode are available in the installed
          libreadline

                                   5/20
                                   ----
configure.in
        - changed RL_LIBRARY_VERSION to 4.0 to match the version of the
          installed shared libraries

                                    6/5
                                    ---
rlstdc.h
        - new file

Makefile.in
        - rlstdc.h is now one of the installed headers

                                    8/3
                                    ---
shlib/Makefile.in
        - made the suffix rule that creates xx.so from xx.c write the
          compiler output to `a.o', which is then mv'd to xx.so, because
          some compilers (Sun WSpro 4.2, for example) don't allow any
          suffixes other than `.o' for `cc -c' (not even `a.out')

                                   9/15
                                   ----

Makefile.in
        - AR and ARFLAGS are now substituted by configure, used in recipes
          that build the libraries

configure.in
        - use AC_CHECK_PROG to check for ar
        - set ARFLAGS if it has not already been set in the environment

                                   10/5
                                   ----
Makefile.in
        - removed savestring.o from object file list

                                   10/28
                                   -----
shlib/Makefile.in
        - don't use a fixed filename in the .c.so suffix rule to avoid
          problems with parallel makes

                                   12/21
                                   -----
support/shlib-install
        - new script to install shared readline and history libraries

shlib/Makefile.in
        - changed to call shlib-install for install and uninstall targets

[readline-4.0-beta1 frozen]

                                   12/22
                                   -----
configure.in
        - call AC_SUBST for SHOBJ_XLDFLAGS and SHLIB_LIBS

shlib/Makefile.in
        - SHOBJ_XLDFLAGS and SHLIB_LIBS are now substituted by configure
        - add $(SHLIB_LIBS) at end of command line that builds the shared
          libraries (currently needed only by AIX 4.2)

                                   12/31
                                   -----
MANIFEST, MANIFEST.doc
        - the TOC html files are no longer generated and no longer part of
          the distribution

                                 2/18/1999
                                 ---------
configure.in
        - set MAKE_SHELL to /bin/sh and substitute into the Makefiles

Makefile.in,{doc,examples,shlib}/Makefile.in
        - set SHELL from @MAKE_SHELL@

[readline-4.0 released]

                                   3/11
                                   ----
doc/Makefile.in
        - removed references to HTMLTOC, since separate HTML table-of-contents
          files are no longer created

examples/Makefile.in
        - remove `*.exe' in clean target for MS-DOS

Makefile.in
        - make `readline' target depend on ./libreadline.a
        - configure now substitutes TERMCAP_LIB into Makefile.in
        - use ${TERMCAP_LIB} instead of -ltermcap in recipe for `readline'
        - clean target now removes readline and readline.exe in case they
          get built

configure.in
        - use `pwd.exe' to set BUILD_DIR on MS-DOS DJGPP

                                   3/15
                                   ----
support/shlib-install
        - Irix 5.x and Irix 6.x should install shared libraries like Solaris 2
        - changes for installing on hp-ux 1[01].x

                                   3/23
                                   ----
configure.in
        - make sure that the $CC argument to shobj-conf is quoted

                                    4/8
                                    ---

xmalloc.h, rlprivate.h, rlshell.h
        - new files

Makefile.in,shlib/Makefile.in
        - add dependencies on xmalloc.h, rlshell.h
        - add xmalloc.h, rlprivate.h, rlshell.h to list of header files

MANIFEST
        - add xmalloc.h, rlprivate.h, rlshell.h

                                    4/9
                                    ---
Makefile.in,shlib/Makefile.in
        - add dependencies on rlprivate.h

                                   4/13
                                   ----
doc/Makefile.in
        - add variable, PSDVI, which is the desired resolution of the
          generated postscript files.  Set to 300 because I don't have
          any 600-dpi printers
        - set LANGUAGE= before calling makeinfo, so messages are in English
        - add rluserman.{info,dvi,ps,html} to appropriate variables
        - add rules to create rluserman.{info,dvi,ps,html}
        - install and uninstall rluserman.info, but don't update the directory
          file in $(infodir) yet

MANIFEST
        - add doc/rluserman.{texinfo,info,dvi,ps,html}

                                   4/30
                                   ----
configure.in
        - updated library version to 4.1

                                    5/3
                                    ---
configure.in
        - SHLIB_MAJOR and SHLIB_MINOR shared library version numbers are
          constructed from $LIBRARY_VERSION and substituted into Makefiles

                                    5/5
                                    ---
support/shlib-install
        - OSF/1 installs shared libraries like Solaris

Makefile.in
        - broke the header file install and uninstall into two new targets:
          install-headers and uninstall-headers
        - install and uninstall depend on install-headers and uninstall-headers
          respectively
        - changed install-shared and uninstall-shared targets to depend on
          install-headers and uninstall-headers, respectively, so users may
          choose to install only the shared libraries.  I'm not sure about
          the uninstall one yet -- maybe it should check whether or not
          the static libraries are installed and not remove the header files
          if they are

                                    9/3
                                    ---
configure.in, config.h.in
        - added test for memmove (for later use)
        - changed version to 4.1-beta1

                                   9/13
                                   ----
examples/rlfe.c
        - Per Bothner's `rlfe' readline front-end program

examples/Makefile.in
        - added rules to build rlfe

                                   9/21
                                   ----
support/shlib-install
        - changes to handle FreeBSD-3.x elf or a.out shared libraries, which
          have different semantics and need different naming conventions

                                 1/24/2000
                                 ---------
doc/Makefile.in
        - remove *.bt and *.bts on `make clean'

                                    2/4
                                    ---


configure.in
        - changed LIBVERSION to 4.1-beta5

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.