Subversion Repositories or1k_old

/*
 * linux/arch/arm/lib/traps-arm6.S
 *
 * Copyright (C) 1996 Russell King.
 * ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk)
 *
 * Low-level vector interface routines
 *
 * Note:  there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes
 * it to save wrong values...  Be aware!
 */
#include <linux/autoconf.h>
#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/hardware.h>

#define current current_set

#ifdef IOC_BASE
/* IOC / IOMD based hardware */
                .equ    ioc_base_high, IOC_BASE & 0xff000000
                .equ    ioc_base_low, IOC_BASE & 0x00ff0000
                .macro  disable_fiq
                mov     r12, #ioc_base_high
                .if     ioc_base_low
                orr     r12, r12, #ioc_base_low
                .endif
                strb    r12, [r12, #0x38]       @ Disable FIQ register
                .endm

                .macro  get_irqnr_and_base, irqnr, base
                mov     r4, #ioc_base_high              @ point at IOC
                .if     ioc_base_low
                orr     r4, r4, #ioc_base_low
                .endif
                ldrb    \irqnr, [r4, #0x24]             @ get high priority first
                adr     \base, irq_prio_h
                teq     \irqnr, #0
#ifdef IOMD_BASE
                ldreqb  \irqnr, [r4, #0x1f4]            @ get dma
                adreq   \base, irq_prio_d
                teqeq   \irqnr, #0
#endif
                ldreqb  \irqnr, [r4, #0x14]             @ get low priority
                adreq   \base, irq_prio_l
                .endm

/*
 * Interrupt table (incorporates priority)
 */
                .macro  irq_prio_table
irq_prio_l:     .byte    0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
                .byte    4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
                .byte    5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
                .byte    5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
                .byte    6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
                .byte    6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
                .byte    5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
                .byte    5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
                .byte    7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
                .byte    7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
                .byte    7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
                .byte    7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
                .byte    7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
                .byte    7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
                .byte    7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
                .byte    7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
#ifdef IOMD_BASE
irq_prio_d:     .byte    0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
                .byte   21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
#endif
irq_prio_h:     .byte    0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
                .byte   13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
                .endm

#elif defined(CONFIG_ARCH_EBSA110)

                .macro  disable_fiq
                .endm

                .macro  get_irqnr_and_base, irqnr, base
                mov     r4, #0xf3000000
                ldrb    \irqnr, [r4]                    @ get interrupts
                adr     \base, irq_prio_ebsa110
                .endm

                .macro  irq_prio_table
irq_prio_ebsa110:
                .byte    0, 0, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
                .byte    4, 4, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
                .byte    5, 5, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
                .byte    5, 5, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2

                .byte    6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
                .byte    6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
                .byte    6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
                .byte    6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2

                .byte    7, 0, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
                .byte    4, 4, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
                .byte    5, 5, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2
                .byte    5, 5, 1, 1, 2, 2, 2, 2, 3, 3, 1, 1, 2, 2, 2, 2

                .byte    6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
                .byte    6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
                .byte    6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
                .byte    6, 6, 6, 6, 2, 2, 2, 2, 3, 3, 6, 6, 2, 2, 2, 2
                .endm

#elif defined(CONFIG_ARCH_TRIO)

                .macro  disable_fiq
                .endm

                .macro  get_irqnr_and_base, irqnr, base
                ldr r4, =AIC_IVR
                ldr             \irqnr, [r4]                    @ get interrupts
                bic             \irqnr, \irqnr, #0xffffffe0
                adr     \base, irq_prio_trio
                .endm
                
                .macro  irq_prio_table
irq_prio_trio:
                .byte   0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
                .endm

#else
#error Unknown architecture
#endif

                .text

@ Offsets into task structure
@ ---------------------------
@
#define STATE           0
#define COUNTER         4
#define PRIORITY        8
#define SIGNAL          12
#define BLOCKED         16
#define FLAGS           20
#define ERRNO           24

#define PF_TRACESYS     0x20

@ Bad Abort numbers
@ -----------------
@
#define BAD_PREFETCH    0
#define BAD_DATA        1
#define BAD_ADDREXCPTN  2
#define BAD_IRQ         3
#define BAD_UNDEFINSTR  4

@ Number of syscalls accepted
@
#define NSYS_CALL       142

@ OS version number used in SWIs
@  RISC OS is 0
@  RISC iX is 8
@
#define OS_NUMBER       9

@
@ Stack format (ensured by USER_* and SVC_*)
@
#define S_FRAME_SIZE    72
#define S_OLD_R0        68
#define S_PSR           64
#define S_PC            60
#define S_LR            56
#define S_SP            52
#define S_IP            48
#define S_FP            44
#define S_R10           40
#define S_R9            36
#define S_R8            32
#define S_R7            28
#define S_R6            24
#define S_R5            20
#define S_R4            16
#define S_R3            12
#define S_R2            8
#define S_R1            4
#define S_R0            0

#include "../lib/constants.h"

                .global _ret_from_sys_call,ret_from_sys_call

/*
 *================================================================================================
 *              Low-level interface code
 *------------------------------------------------------------------------------------------------
 *              Trap initialisation
 *------------------------------------------------------------------------------------------------
 *
 * Note - FIQ code has changed.  The default is a couple of words in 0x1c, 0x20
 * that call _unexp_fiq.  Nowever, we now copy the FIQ routine to 0x1c (removes
 * some excess cycles).
 *
 * What we need to put into 0-0x1c are ldrs to branch to 0xC0000000
 * (the kernel).
 * 0x1c onwards is reserved for FIQ, so I think that I will allocate 0xe0 onwards for
 * the actuall address to jump to.
 */
/*
 * these go into 0x00
 */
Lbranches:      swi     SYS_ERROR0
                ldr     pc, Lbranches + 0xe4
                ldr     pc, Lbranches + 0xe8
                ldr     pc, Lbranches + 0xec
                ldr     pc, Lbranches + 0xf0
                ldr     pc, Lbranches + 0xf4
                ldr     pc, Lbranches + 0xf8
                ldr     pc, . + 4
                .word   _unexp_fiq
/*
 * this is put into 0xe0 and above
 */
jump_addresses: .word   0
                .word   vector_undefinstr
                .word   vector_swi
                .word   vector_prefetch
                .word   vector_data
                .word   vector_addrexcptn
                .word   vector_IRQ
/*
 * initialise the trap system
 */
                .global _trap_init,trap_init

trap_init:
_trap_init:     stmfd   sp !,{r4 - r9, lr}              @ Save link register
                mrs     r0, cpsr
                bic     r0, r0, #31
                orr     r0, r0, #0xd3
                msr     cpsr, r0
                mov     r0, #0xe0
                adr     r1, jump_addresses
                ldmia   r1, {r1 - r7}
                stmia   r0, {r1 - r7}
                mov     r0, #0                          @ Lowest location
                adr     r1, Lbranches
                ldmia   r1, {r1 - r9}
                stmia   r0, {r1 - r9}                   @ Save all into page 0 ram
                ldmfd   sp!, {r4 - r9, pc}
/*
 *------------------------------------------------------------------------------------------------
 * Undefined FIQs
 *------------------------------------------------------------------------------------------------
 * Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC
 * MUST PRESERVE SVC SPSR, but need to switch to SVC mode to show our msg.
 * Basically to switch modes, we *HAVE* to clobber one register...  brain damage alert!
 * I don't think that we can execute any code in here in any other mode than FIQ...  Ok
 * you can switch to another mode, but you can't get out of that mode without clobbering one
 * register.
 */
_unexp_fiq:     disable_fiq
                subs    pc, lr, #4
/*
 *------------------------------------------------------------------------------------------------
 * Interrupt entry dispatcher - dispatches it to the correct handler for the processor mode
 *------------------------------------------------------------------------------------------------
 * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
 */
                .global vector_IRQ,vector_undefinstr,vector_data,vector_prefetch,vector_swi


LCirq:          .word   __temp_irq
vector_IRQ:     @
                @ save mode specific registers
                @
                ldr     r13, LCirq
                sub     lr, lr, #4
                str     lr, [r13]                       @ save lr_IRQ
                mrs     lr, spsr
                str     lr, [r13, #4]                   @ save spsr_IRQ
                @
                @ now branch to the relevent MODE handling routine
                @
                mrs     sp, cpsr                        @ switch to SVC mode
                bic     sp, sp, #31
                orr     sp, sp, #0x13
                msr     spsr, sp
                and     lr, lr, #15
                cmp     lr, #4
                addlts  pc, pc, lr, lsl #2              @ Changes mode and branches
                b       __irq_invalid                   @  4 - 15
                b       __irq_usr                       @  0  (USR_26 / USR_32)
                b       __irq_invalid                   @  1  (FIQ_26 / FIQ_32)
                b       __irq_invalid                   @  2  (IRQ_26 / IRQ_32)
                b       __irq_svc                       @  3  (SVC_26 / SVC_32)
/*
 *------------------------------------------------------------------------------------------------
 * Undef instr entry dispatcher - dispatches it to the correct handler for the processor mode
 *------------------------------------------------------------------------------------------------
 * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
 */
LCund:          .word   __temp_und
vector_undefinstr:
                @
                @ save mode specific registers
                @
                ldr     r13, [pc, #LCund - . - 8]
                str     lr, [r13]
                mrs     lr, spsr
                str     lr, [r13, #4]
                @
                @ now branch to the relevent MODE handling routine
                @
                mrs     sp, cpsr
                bic     sp, sp, #31
                orr     sp, sp, #0x13
                msr     spsr, sp
                and     lr, lr, #15
                cmp     lr, #4
                addlts  pc, pc, lr, lsl #2              @ Changes mode and branches
                b       __und_invalid                   @  4 - 15
                b       __und_usr                       @  0 (USR_26 / USR_32)
                b       __und_invalid                   @  1 (FIQ_26 / FIQ_32)
                b       __und_invalid                   @  2 (IRQ_26 / IRQ_32)
                b       __und_svc                       @  3 (SVC_26 / SVC_32)
/*
 *------------------------------------------------------------------------------------------------
 * Prefetch abort dispatcher - dispatches it to the correct handler for the processor mode
 *------------------------------------------------------------------------------------------------
 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
 */
LCabt:          .word   __temp_abt
vector_prefetch:
                @
                @ save mode specific registers
                @
                sub     lr, lr, #4
                ldr     r13, LCabt
                str     lr, [r13]
                mrs     lr, spsr
                str     lr, [r13, #4]
                @
                @ now branch to the relevent MODE handling routine
                @
                mrs     sp, cpsr
                bic     sp, sp, #31
                orr     sp, sp, #0x13
                msr     spsr, sp
                and     lr, lr, #15
                cmp     lr, #4
                addlts  pc, pc, lr, lsl #2              @ Changes mode and branches
                b       __pabt_invalid                  @  4 - 15
                b       __pabt_usr                      @  0  (USR_26 / USR_32)
                b       __pabt_invalid                  @  1  (FIQ_26 / FIQ_32)
                b       __pabt_invalid                  @  2  (IRQ_26 / IRQ_32)
                b       __pabt_invalid                  @  3  (SVC_26 / SVC_32)
/*
 *------------------------------------------------------------------------------------------------
 * Data abort dispatcher - dispatches it to the correct handler for the processor mode
 *------------------------------------------------------------------------------------------------
 * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
 */
vector_data:    @
                @ save mode specific registers
                @
                sub     lr, lr, #8
                ldr     r13, LCabt
                str     lr, [r13]
                mrs     lr, spsr
                str     lr, [r13, #4]
                @
                @ now branch to the relevent MODE handling routine
                @
                mrs     sp, cpsr
                bic     sp, sp, #31
                orr     sp, sp, #0x13
                msr     spsr, sp
                and     lr, lr, #15
                cmp     lr, #4
                addlts  pc, pc, lr, lsl #2              @ Changes mode & branches
                b       __dabt_invalid                  @  4 - 15
                b       __dabt_usr                      @  0  (USR_26 / USR_32)
                b       __dabt_invalid                  @  1  (FIQ_26 / FIQ_32)
                b       __dabt_invalid                  @  2  (IRQ_26 / IRQ_32)
                b       __dabt_svc                      @  3  (SVC_26 / SVC_32)
/*
 *===============================================================================
 * SWI handler
 *-------------------------------------------------------------------------------
 *
 * We now handle sys-call tracing, and the errno in the task structure.
 * Still have a problem with >4 arguments for functions.  Theres only
 * a couple of functions in the code that have 5 arguments, so Im not
 * too worried.
 */

#include "calls.S"

LC1:            .word   current
/*
 * Enter in SVC mode, spsr_all = OLD_USER_cpsr_all, R14 = OLD_USER_PC
 */
vector_swi:     sub     sp, sp, #S_FRAME_SIZE
                stmia   sp, {r0 - r12}                  @ Calling r0 - r12
                add     r8, sp, #S_PC
                stmdb   r8, {sp, lr}^                   @ Calling sp, lr
                mov     r7, r0
                mrs     r6, spsr
                mov     r5, lr
                stmia   r8, {r5, r6, r7}                @ Save calling PC, CPSR, OLD_R0
                mov     fp, #0
                ldr     r6, [lr, #-4]!                  @ get swi instruction
                and     r5, r6, #0x0f000000
                teq     r5, #0x0f000000
                bne     Larm700bug
                mrs     r5, cpsr                        @ enable irqs
                bic     r5, r5, #I_BIT
                msr     cpsr, r5
                bic     r6, r6, #0xff000000             @ mask off swi op code
                eor     r6, r6, #OS_NUMBER << 20        @ check OS number
Lretry:         cmp     r6, #NR_SYSCALLS                @ check upper syscall limit
                bcs     Lswi_bad_call

                ldr     r5, [pc, #LC1 - . - 8]
                ldr     r5, [r5]
                mov     ip, #0                          @ zero errno
                str     ip, [r5, #ERRNO]

                ldr     ip, [r5, #FLAGS]                @ check for syscall tracing
                tst     ip, #PF_TRACESYS
                bne     Ltrace_this_syscall

                adr     ip, _sys_call_table
                mov     r9, sp                          @ hack for routines needing > 4 values
                str     r4, [sp, #-4]!                  @ new-style: (r0 = arg1, r4 = arg5)
                mov     lr, pc
                ldr     pc, [ip, r6, lsl #2]            @ call sys routine
                add     sp, sp, #4

                ldr     ip, [r5, #ERRNO]                @ check errno
                rsbs    ip, ip, #0
                movne   r0, ip
                str     r0, [sp, #S_R0]                 @ returned r0
                b       _ret_from_sys_call

Ltrace_this_syscall:
                ldr     r7, [sp, #S_IP]
                mov     r0, #0
                str     r0, [sp, #S_IP]
                bl      syscall_trace                   @ trace entry [IP must = 0]
                str     r7, [sp, #S_IP]
                ldmia   sp, {r0 - r3}                   @ have to reload r0 - r3

                adr     ip, _sys_call_table
                mov     r9, sp                          @ hack for routines needing > 4 values
                str     r4, [sp, #-4]!                  @ new-style: (r0 = arg1, r4 = arg5)
                mov     lr, pc
                ldr     pc, [ip, r6, lsl #2]            @ call sys routine
                add     sp, sp, #4

                ldr     ip, [r5, #ERRNO]
                rsbs    ip, ip, #0
                movne   r0, ip
                str     r0, [sp, #S_R0]                 @ returned r0

                mov     r0, #1
                str     r0, [sp, #S_IP]
                bl      syscall_trace                   @ trace exit [IP must != 0]
                str     r7, [sp, #S_IP]
                b       _ret_from_sys_call

Lswi_bad_call:  tst     r6, #0x00f00000
                bne     Lbad
                cmp     r6, #(KSWI_SYS_BASE - KSWI_BASE) @ check for arm private syscalls
                bcs     Larm_sys_call
                bl      sys_ni_syscall
                str     r0, [sp, #0]                    @ returned r0
                b       _ret_from_sys_call

Lbad:           eor     r0, r6, #OS_NUMBER << 20        @ Put OS number back
                mov     r1, sp
                bl      deferred
                ldmfd   sp, {r0 - r3}
                b       _ret_from_sys_call

Larm_sys_call:  bic     r0, r6, #0x000f0000
                mov     r1, sp
                bl      arm_syscall
                b       _ret_from_sys_call

@ r0 = syscall number
@ r1 = syscall r0
@ r5 = syscall r4
@ ip = syscall table
sys_syscall:    mov     r6, r0
                eor     r6, r6, #OS_NUMBER << 20
                cmp     r6, #NR_SYSCALLS                @ check range
                movgt   r0, #-ENOSYS
                movgt   pc, lr
                add     sp, sp, #4                      @ take of the save of our r4
                ldmib   sp, {r0 - r4}                   @ get our args
                str     r4, [sp, #-4]!                  @ Put our arg on the stack
                ldr     pc, [ip, r6, lsl #2]

Larm700bug:     str     lr, [r8]
                ldr     r0, [sp, #S_PSR]                @ Get calling cpsr
                msr     spsr, r0
                ldmia   sp, {r0 - lr}^                  @ Get calling r0 - lr
                mov     r0, r0
                add     sp, sp, #S_PC
                ldr     lr, [sp], #S_FRAME_SIZE - S_PC  @ Get PC and jump over PC, PSR, OLD_R0
                movs    pc, lr

                .globl  _sys_call_table,sys_call_table
sys_call_table:
_sys_call_table:
#include "calls.S"

/*
 *================================================================================================
 * Undefined instruction handler
 *------------------------------------------------------------------------------------------------
 */
LC2:            .word   last_task_used_math
                .word   current
                .word   fp_enter

__und_usr:      sub     sp, sp, #S_FRAME_SIZE           @ Allocate frame size in one go
                stmia   sp, {r0 - r12}                  @ Save r0 - r12
                add     r8, sp, #S_PC
                stmdb   r8, {sp, lr}^                   @ Save user r0 - r12
                ldr     r4, [pc, #LCund - . - 8]
                ldmia   r4, {r5 - r7}
                stmia   r8, {r5 - r7}                   @ Save USR pc, cpsr, old_r0

                adr     r1, LC2
                ldmia   r1, {r1, r2, r4}
                ldr     r1, [r1]
                ldr     r2, [r2]
                teq     r1, r2
                blne    math_state_restore
                adr     r9, _fpreturn
                adr     lr, _fpundefinstr
                ldr     pc, [r4]                        @ Call FP module USR entry point

                .global _fpreturn,fpreturn
                .global _fpundefinstr,fpundefinstr
fpundefinstr:
_fpundefinstr:  mov     r0, lr                          @ Called by FP module on undefined instr
                mov     r1, sp
                mrs     r4, cpsr                        @ Enable interrupts
                bic     r4, r4, #I_BIT
                msr     cpsr, r4
                bl      do_undefinstr
fpreturn:
_fpreturn:      b       _ret_from_sys_call              @ Normal FP exit

__und_svc:      sub     sp, sp, #S_FRAME_SIZE
                stmia   sp, {r0 - r12}                  @ save r0 - r12
                mov     r6, lr
                mov     fp, #0
                ldr     r7, [pc, #LCund - . - 8]
                ldmia   r7, {r7 - r9}
                add     r5, sp, #S_FRAME_SIZE
                add     r4, sp, #S_SP
                stmia   r4, {r5 - r9}                   @ save sp_SVC, lr_SVC, pc, cpsr, old_ro

                adr     r1, LC2
                ldmia   r1, {r1, r2, r4}
                ldr     r1, [r1]
                ldr     r2, [r2]
                teq     r1, r2
                blne    math_state_restore
                adr     r9, _fpreturnsvc
                adr     lr, _fpundefinstrsvc
                ldr     pc, [r4]                        @ Call FP module SVC entry point

                .globl  _fpreturnsvc,fpreturnsvc
                .globl  _fpundefinstrsvc,fpundefinstrsvc

fpundefinstrsvc:
_fpundefinstrsvc:
                mov     r0, r5                          @ unsigned long pc
                mov     r1, sp                          @ struct pt_regs *regs
                bl      do_undefinstr
fpreturnsvc:
_fpreturnsvc:   ldr     lr, [sp, #S_PSR]                @ Get SVC cpsr
                msr     spsr, lr
                ldmia   sp, {r0 - pc}^                  @ Restore SVC registers

/* We get here if an undefined instruction happens and the floating
 * point emulator is not present.  If the offending instruction was
 * a WFS, we just perform a normal return as if we had emulated the
 * operation.  This is a hack to allow some basic userland binaries
 * to run so that the emulator module proper can be loaded. --philb
 */
fpe_not_present:
                adr     r10, wfs_mask_data
                ldmia   r10, {r4, r5, r6, r7, r8}
                ldr     r10, [sp, #S_PC]                @ Load PC
                sub     r10, r10, #4
                ldrt    r10, [r10]                      @ get instruction
                and     r5, r10, r5
                teq     r5, r4                          @ Is it WFS?
                moveq   pc, r9
                and     r5, r10, r8
                teq     r5, r6                          @ Is it LDF/STF on sp or fp?
                teqne   r5, r7
                movne   pc, lr
                tst     r10, #0x00200000                @ Does it have WB
                moveq   pc, r9
                and     r4, r10, #255                   @ get offset
                and     r6, r10, #0x000f0000
                tst     r10, #0x00800000                @ +/-
                rsbeq   r4, r4, #0
                ldr     r5, [sp, r6, lsr #14]           @ Load reg
                add     r5, r5, r4, lsl #2
                str     r5, [sp, r6, lsr #14]           @ Save reg
                mov     pc, r9

wfs_mask_data:  .word   0x0e200110                      @ WFS
                .word   0x0fff0fff
                .word   0x0d0d0100                      @ LDF [sp]/STF [sp]
                .word   0x0d0b0100                      @ LDF [fp]/STF [fp]
                .word   0x0f0f0f00


LC3:            .word   _fp_save
                    .word       _fp_restore


/*
 * Function to call when switching tasks to save FP state
 */
                .global _fpe_save,fpe_save
fpe_save:
_fpe_save:      ldr     r1, [pc, #LC3 - . - 8]
                ldr     pc, [r1]

/*
 * Function to call when switching tasks to restore FP state
 */
                .global _fpe_restore,fpe_restore
fpe_restore:
_fpe_restore:   ldr     r1, [pc, #LC3 - . - 4]
                ldr     pc, [r1]

__und_invalid:  sub     sp, sp, #S_FRAME_SIZE
                stmia   sp, {r0 - lr}
                mov     r7, r0
                ldr     r4, [pc, #LCund - . - 8]
                ldmia   r4, {r5, r6}                    @ Get UND/IRQ/FIQ/ABT pc, cpsr
                add     r4, sp, #S_PC
                stmia   r4, {r5, r6, r7}                @ Save UND/IRQ/FIQ/ABT pc, cpsr, old_r0
                mov     r0, sp                          @ struct pt_regs *regs
                mov     r1, #BAD_UNDEFINSTR             @ int reason
                and     r2, r6, #31                     @ int mode
                b       bad_mode                        @ Does not ever return...
/*
 *================================================================================================
 * Prefetch abort handler
 *------------------------------------------------------------------------------------------------
 */
pabtmsg:        .ascii  "Pabt: %08lX\n\0"
                .align
__pabt_usr:     sub     sp, sp, #S_FRAME_SIZE           @ Allocate frame size in one go
                stmia   sp, {r0 - r12}                  @ Save r0 - r12
                add     r8, sp, #S_PC
                stmdb   r8, {sp, lr}^                   @ Save sp_usr lr_usr
                ldr     r4, [pc, #LCabt - . - 8]
                ldmia   r4, {r5 - r7}                   @ Get USR pc, cpsr
                stmia   r8, {r5 - r7}                   @ Save USR pc, cpsr, old_r0

                mrs     r7, cpsr                        @ Enable interrupts if they were
                bic     r7, r7, #I_BIT                  @ previously
                msr     cpsr, r7
                mov     r0, r5                          @ address (pc)
                mov     r1, sp                          @ regs
                bl      do_PrefetchAbort                @ call abort handler
                teq     r0, #0                          @ Does this still apply???
                bne     _ret_from_sys_call              @ Return from sys call
#ifdef DEBUG_UNDEF
                adr     r0, t
                bl      _printk
#endif
                mov     r0, r5
                mov     r1, sp
                and     r2, r6, #31
                bl      do_undefinstr
                ldr     lr, [sp, #S_PSR]                @ Get USR cpsr
                msr     spsr, lr
                ldmia   sp, {r0 - pc}^                  @ Restore USR registers

__pabt_invalid: sub     sp, sp, #S_FRAME_SIZE           @ Allocate frame size in one go
                stmia   sp, {r0 - lr}                   @ Save XXX r0 - lr
                mov     r7, r0                          @ OLD R0
                ldr     r4, [pc, #LCabt - . - 8]
                ldmia   r4, {r5 - r7}                   @ Get XXX pc, cpsr
                add     r4, sp, #S_PC
                stmia   r4, {r5 - r7}                   @ Save XXX pc, cpsr, old_r0
                mov     r0, sp                          @ Prefetch aborts are definitely *not*
                mov     r1, #BAD_PREFETCH               @ allowed in non-user modes.  We cant
                and     r2, r6, #31                     @ recover from this problem.
                b       bad_mode

#ifdef DEBUG_UNDEF
t:      .ascii "*** undef ***\r\n\0"
        .align
#endif
/*
 *================================================================================================
 * Address exception handler
 *------------------------------------------------------------------------------------------------
 * These aren't too critical. (they're not supposed to happen, and won't happen in 32-bit mode).
 */

vector_addrexcptn:
                b       vector_addrexcptn

/*
 *================================================================================================
 * Interrupt (IRQ) handler (r13 points to irq temp save area)
 * MOD: if in user mode, then *no* kernel routine is running, so dont have to
 *      save svc lr
 *------------------------------------------------------------------------------------------------
 */
LC4:            .word   irqjump
__irq_usr:      sub     sp, sp, #S_FRAME_SIZE
                stmia   sp, {r0 - r12}                  @ save r0 - r12
                add     r8, sp, #S_PC
                stmdb   r8, {sp, lr}^
                ldr     r4, [pc, #LCirq - . - 8]
                ldmia   r4, {r5 - r7}                   @ get saved PC, SPSR
                stmia   r8, {r5 - r7}                   @ save pc, psr, old_r0
urepeat:        get_irqnr_and_base r6, r5
#if defined(CONFIG_ARCH_TRIO)
                teq     r6, #0x1f
                bne     has_irq_usr
                ldr     r4,=AIC_EOICR
                eor     r6,r6,r6
                str     r6,[r4]
#else
                teq     r6, #0
                bne has_irq_usr
#endif
                b _ret_from_sys_call
has_irq_usr:
                ldrb    r0, [r5, r6]                    @ Get IRQ number
                ldr     r2, [pc, #LC4 - . - 8]
                mov     r1, sp
                mov     lr, pc
                @
                @ routine gets called with r0 = interrupt number, r1 = struct pt_regs *
                @
                ldr     pc, [r2, r0, lsl#2]
                mov     r2, #0
                teq     r0, #0                          @ Check to see if it is a fast IRQ
                beq     _ret_from_sys_call
                ldr     r0, [sp, #S_PSR]                @ Get saved SPSR
                msr     spsr, r0                        @ restore SPSR
                ldmia   sp, {r0 - lr}^                  @ Get calling r0 - lr
                mov     r0, r0
                add     sp, sp, #S_PC
                ldr     lr, [sp], #S_FRAME_SIZE - S_PC
                movs    pc, lr

                irq_prio_table

LC5:            .word   intr_count                      @ -8
                .word   bh_mask                 @ -4
                .word   bh_active                       @ -0

__irq_svc:      sub     sp, sp, #S_FRAME_SIZE
                stmia   sp, {r0 - r12}                  @ save r0 - r12
                mov     r6, lr
                mov     fp, #0
                ldr     r7, [pc, #LCirq - . - 8]
                ldmia   r7, {r7 - r9}
                add     r5, sp, #S_FRAME_SIZE
                add     r4, sp, #S_SP
                stmia   r4, {r5, r6, r7, r8, r9}        @ save sp_SVC, lr_SVC, pc, cpsr, old_ro
srepeat:        get_irqnr_and_base r6, r5
#if defined(CONFIG_ARCH_TRIO)
                teq     r6, #0x1f
#else
                teq     r6, #0
#endif
                beq     no_irq2
                ldrb    r0, [r5, r6]                    @ Get IRQ number
                ldr     r2, [pc, #LC4 - . - 8]
                mov     r1, sp
                mov     lr, pc
                @
                @ routine gets called with r0 = interrupt number, r1 = struct pt_regs *
                @
                ldr     pc, [r2, r0, lsl #2]
                teq     r0, #0                          @ Check to see if it was a fast IRQ
                bne     srepeat
                ldr     r4, [pc, #LC5 - . - 8]
                ldr     r5, [r4]
                teq     r5, #0
                bne     srepeat
                ldr     r6, [pc, #LC5 - . - 4]
                ldr     r7, [pc, #LC5 - . - 0]
recheck_bh2:    ldr     r0, [r6]
                ldr     r1, [r7]
                tst     r0, r1
                beq     srepeat
                add     r0, r5, #1
                str     r0, [r4]
                mrs     r8, cpsr                        @ Enable interrupts
                bic     lr, r8, #I_BIT
                msr     cpsr, lr
                bl      do_bottom_half
                msr     cpsr, r8                        @ Restore interrupt state
                str     r5, [r4]
                b       recheck_bh2
no_irq2:
#if defined(CONFIG_ARCH_TRIO)
                ldr     r4, =AIC_EOICR
                eor     r6,r6,r6
                str r6,[r4]
#endif
        ldr     r0, [sp, #S_PSR]
                msr     spsr, r0
                ldmia   sp, {r0 - pc}^                  @ load r0 - pc, cpsr

__irq_invalid:  sub     sp, sp, #S_FRAME_SIZE   @ Allocate space on stack for frame
                stmfd   sp, {r0 - lr}           @ Save r0 - lr
                mov     r7, #-1
                ldr     r4, [pc, #LCirq - . - 8]
                ldmia   r4, {r5, r6}            @ get saved pc, psr
                add     r4, sp, #S_PC
                stmia   r4, {r5, r6, r7}
                mov     fp, #0
                mov     r0, sp
                mov     r1, #BAD_IRQ
                b       bad_mode
/*
 *================================================================================================
 * Data abort handler code
 *------------------------------------------------------------------------------------------------
 */
LCprocfns:      .word   processor

__dabt_usr:     sub     sp, sp, #S_FRAME_SIZE           @ Allocate frame size in one go
                stmia   sp, {r0 - r12}                  @ save r0 - r12
                add     r3, sp, #S_PC
                stmdb   r3, {sp, lr}^
                ldr     r0, [pc, #LCabt - . - 8]
                ldmia   r0, {r0 - r2}                   @ Get USR pc, cpsr
                stmia   r3, {r0 - r2}                   @ Save USR pc, cpsr, old_r0
                mov     fp, #0
                mrs     r2, cpsr                        @ Enable interrupts if they were
                bic     r2, r2, #I_BIT                  @ previously
                msr     cpsr, r2
                ldr     r2, LCprocfns
                mov     lr, pc
                ldr     pc, [r2, #8]                    @ call processor specific code
                mov     r3, sp
                bl      do_DataAbort
                b       _ret_from_sys_call

__dabt_svc:     sub     sp, sp, #S_FRAME_SIZE
                stmia   sp, {r0 - r12}                  @ save r0 - r12
                ldr     r2, [pc, #LCabt - . - 8]
                add     r0, sp, #S_FRAME_SIZE
                add     r5, sp, #S_SP
                mov     r1, lr
                ldmia   r2, {r2 - r4}                   @ get pc, cpsr
                stmia   r5, {r0 - r4}                   @ save sp_SVC, lr_SVC, pc, cpsr, old_ro
                tst     r3, #I_BIT
                mrseq   r0, cpsr                        @ Enable interrupts if they were
                biceq   r0, r0, #I_BIT                  @ previously
                msreq   cpsr, r0
                mov     r0, r2
                ldr     r2, LCprocfns
                mov     lr, pc
                ldr     pc, [r2, #8]                    @ call processor specific code
                mov     r3, sp
                bl      do_DataAbort
                ldr     r0, [sp, #S_PSR]
                msr     spsr, r0
                ldmia   sp, {r0 - pc}^                  @ load r0 - pc, cpsr

__dabt_invalid: sub     sp, sp, #S_FRAME_SIZE
                stmia   sp, {r0 - lr}                   @ Save SVC r0 - lr [lr *should* be intact]
                mov     r7, r0
                ldr     r4, [pc, #LCabt - . - 8]
                ldmia   r4, {r5, r6}                    @ Get SVC pc, cpsr
                add     r4, sp, #S_PC
                stmia   r4, {r5, r6, r7}                @ Save SVC pc, cpsr, old_r0
                mov     r0, sp
                mov     r1, #BAD_DATA
                and     r2, r6, #31
                b       bad_mode

/*
 *================================================================================================
 * All exits to user mode from the kernel go through this code.
 */

LC6:
                .word   intr_count              @ -8
                .word   bh_mask         @ -4
                .word   bh_active               @ -0
                .word   need_resched            @ +4
                .word   current         @ +8
                .word   init_task               @ +12

Lreschedule:    bl      schedule

ret_from_sys_call:
_ret_from_sys_call:
                adr     r9, LC6
                ldmia   r9!, {r4, r6, r7}
                ldr     r5, [r4]
                teq     r5, #0
                bne     Lret_no_check
Lrecheck_bh:    ldr     r0, [r6]
                ldr     r1, [r7]
                tst     r0, r1
                bne     Lhandle_bottom_half
                ldr     r0, [sp, #S_PSR]
                tst     r0, #3
                bne     Lret_no_check
                ldmia   r9, {r5, r6, r7}
                ldr     r0, [r5]
                teq     r0, #0
                bne     Lreschedule
                ldr     r0, [r6]
                teq     r0, r7
                beq     Lret_no_check

                ldr     r1, [r0, #SIGNAL]
                ldr     r0, [r0, #BLOCKED]
                bics    r1, r1, r0
                movne   r1, sp
                blne    do_signal
Lret_no_check:  mrs     r0, cpsr                        @ disable IRQs
                orr     r0, r0, #I_BIT
                msr     cpsr, r0
                ldr     r0, [sp, #S_PSR]                @ Get calling cpsr
                msr     spsr, r0
                ldmia   sp, {r0 - lr}^                  @ Get calling r0 - lr
                mov     r0, r0
                add     sp, sp, #S_PC
                ldr     lr, [sp], #S_FRAME_SIZE - S_PC  @ Get PC and jump over PC, PSR, OLD_R0
                movs    pc, lr

Lhandle_bottom_half:
                add     r0, r5, #1
                str     r0, [r4]
                mrs     r8, cpsr
                bic     lr, r8, #I_BIT
                msr     cpsr, lr
                bl      do_bottom_half
                msr     cpsr, r8
                str     r5, [r4]
                b       Lrecheck_bh

_fpnull:        mov     pc, lr

                .data

                .global _fp_enter,fp_enter
                .global _fp_save,fp_save
                .global _fp_restore,fp_restore

fp_enter:
_fp_enter:      .word   fpe_not_present
                .word   fpe_not_present
fp_save:
_fp_save:       .word   _fpnull
fp_restore:
_fp_restore:    .word   _fpnull

__temp_irq:     .word   0                                @ saved lr_irq
                .word   0                                @ saved spsr_irq
                .word   -1                              @ old_r0
__temp_und:     .word   0                                @ Saved lr_und
                .word   0                                @ Saved spsr_und
                .word   -1                              @ old_r0
__temp_abt:     .word   0                                @ Saved lr_abt
                .word   0                                @ Saved spsr_abt
                .word   -1                              @ old_r0