Subversion Repositories or1k_old

|
|       res_func.sa 3.9 7/29/91
|
| Normalizes denormalized numbers if necessary and updates the
| stack frame.  The function is then restored back into the
| machine and the 040 completes the operation.  This routine
| is only used by the unsupported data type/format handler.
| (Exception vector 55).
|
| For packed move out (fmove.p fpm,<ea>) the operation is
| completed here; data is packed and moved to user memory. 
| The stack is restored to the 040 only in the case of a
| reportable exception in the conversion.
|
|
|               Copyright (C) Motorola, Inc. 1990
|                       All Rights Reserved
|
|       THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA 
|       The copyright notice above does not evidence any  
|       actual or intended publication of such source code.

RES_FUNC:    |idnt    2,1 | Motorola 040 Floating Point Software Package

        |section        8

        .include "fpsp.h"

sp_bnds:        .short  0x3f81,0x407e
                .short  0x3f6a,0x0000
dp_bnds:        .short  0x3c01,0x43fe
                .short  0x3bcd,0x0000

        |xref   mem_write
        |xref   bindec
        |xref   get_fline
        |xref   round
        |xref   denorm
        |xref   dest_ext
        |xref   dest_dbl
        |xref   dest_sgl
        |xref   unf_sub
        |xref   nrm_set
        |xref   dnrm_lp
        |xref   ovf_res
        |xref   reg_dest
        |xref   t_ovfl
        |xref   t_unfl

        .global res_func
        .global         p_move

res_func:
        clrb    DNRM_FLG(%a6)
        clrb    RES_FLG(%a6)
        clrb    CU_ONLY(%a6)
        tstb    DY_MO_FLG(%a6)
        beqs    monadic
dyadic:
        btstb   #7,DTAG(%a6)    |if dop = norm=000, zero=001,
|                               ;inf=010 or nan=011
        beqs    monadic         |then branch
|                               ;else denorm
| HANDLE DESTINATION DENORM HERE
|                               ;set dtag to norm
|                               ;write the tag & fpte15 to the fstack
        leal    FPTEMP(%a6),%a0

        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)

        bsr     nrm_set         |normalize number (exp will go negative)
        bclrb   #sign_bit,LOCAL_EX(%a0) |get rid of false sign
        bfclr   LOCAL_SGN(%a0){#0:#8}   |change back to IEEE ext format
        beqs    dpos
        bsetb   #sign_bit,LOCAL_EX(%a0)
dpos:
        bfclr   DTAG(%a6){#0:#4}        |set tag to normalized, FPTE15 = 0
        bsetb   #4,DTAG(%a6)    |set FPTE15
        orb     #0x0f,DNRM_FLG(%a6)
monadic:
        leal    ETEMP(%a6),%a0
        btstb   #direction_bit,CMDREG1B(%a6)    |check direction
        bne     opclass3                        |it is a mv out
|
| At this point, only opclass 0 and 2 possible
|
        btstb   #7,STAG(%a6)    |if sop = norm=000, zero=001,
|                               ;inf=010 or nan=011
        bne     mon_dnrm        |else denorm
        tstb    DY_MO_FLG(%a6)  |all cases of dyadic instructions would
        bne     normal          |require normalization of denorm

| At this point:
|       monadic instructions:   fabs  = $18  fneg   = $1a  ftst   = $3a
|                               fmove = $00  fsmove = $40  fdmove = $44
|                               fsqrt = $05* fssqrt = $41  fdsqrt = $45
|                               (*fsqrt reencoded to $05)
|
        movew   CMDREG1B(%a6),%d0       |get command register
        andil   #0x7f,%d0                       |strip to only command word
|
| At this point, fabs, fneg, fsmove, fdmove, ftst, fsqrt, fssqrt, and 
| fdsqrt are possible.
| For cases fabs, fneg, fsmove, and fdmove goto spos (do not normalize)
| For cases fsqrt, fssqrt, and fdsqrt goto nrm_src (do normalize)
|
        btstl   #0,%d0
        bne     normal                  |weed out fsqrt instructions
|
| cu_norm handles fmove in instructions with normalized inputs.
| The routine round is used to correctly round the input for the
| destination precision and mode.
|
cu_norm:
        st      CU_ONLY(%a6)            |set cu-only inst flag
        movew   CMDREG1B(%a6),%d0
        andib   #0x3b,%d0               |isolate bits to select inst
        tstb    %d0
        beql    cu_nmove        |if zero, it is an fmove
        cmpib   #0x18,%d0
        beql    cu_nabs         |if $18, it is fabs
        cmpib   #0x1a,%d0
        beql    cu_nneg         |if $1a, it is fneg
|
| Inst is ftst.  Check the source operand and set the cc's accordingly.
| No write is done, so simply rts.
|
cu_ntst:
        movew   LOCAL_EX(%a0),%d0
        bclrl   #15,%d0
        sne     LOCAL_SGN(%a0)
        beqs    cu_ntpo
        orl     #neg_mask,USER_FPSR(%a6) |set N
cu_ntpo:
        cmpiw   #0x7fff,%d0     |test for inf/nan
        bnes    cu_ntcz
        tstl    LOCAL_HI(%a0)
        bnes    cu_ntn
        tstl    LOCAL_LO(%a0)
        bnes    cu_ntn
        orl     #inf_mask,USER_FPSR(%a6)
        rts
cu_ntn:
        orl     #nan_mask,USER_FPSR(%a6)
        movel   ETEMP_EX(%a6),FPTEMP_EX(%a6)    |set up fptemp sign for 
|                                               ;snan handler

        rts
cu_ntcz:
        tstl    LOCAL_HI(%a0)
        bnel    cu_ntsx
        tstl    LOCAL_LO(%a0)
        bnel    cu_ntsx
        orl     #z_mask,USER_FPSR(%a6)
cu_ntsx:
        rts
|
| Inst is fabs.  Execute the absolute value function on the input.
| Branch to the fmove code.  If the operand is NaN, do nothing.
|
cu_nabs:
        moveb   STAG(%a6),%d0
        btstl   #5,%d0                  |test for NaN or zero
        bne     wr_etemp                |if either, simply write it
        bclrb   #7,LOCAL_EX(%a0)                |do abs
        bras    cu_nmove                |fmove code will finish
|
| Inst is fneg.  Execute the negate value function on the input.
| Fall though to the fmove code.  If the operand is NaN, do nothing.
|
cu_nneg:
        moveb   STAG(%a6),%d0
        btstl   #5,%d0                  |test for NaN or zero
        bne     wr_etemp                |if either, simply write it
        bchgb   #7,LOCAL_EX(%a0)                |do neg
|
| Inst is fmove.  This code also handles all result writes.
| If bit 2 is set, round is forced to double.  If it is clear,
| and bit 6 is set, round is forced to single.  If both are clear,
| the round precision is found in the fpcr.  If the rounding precision
| is double or single, round the result before the write.
|
cu_nmove:
        moveb   STAG(%a6),%d0
        andib   #0xe0,%d0                       |isolate stag bits
        bne     wr_etemp                |if not norm, simply write it
        btstb   #2,CMDREG1B+1(%a6)      |check for rd
        bne     cu_nmrd
        btstb   #6,CMDREG1B+1(%a6)      |check for rs
        bne     cu_nmrs
|
| The move or operation is not with forced precision.  Test for
| nan or inf as the input; if so, simply write it to FPn.  Use the
| FPCR_MODE byte to get rounding on norms and zeros.
|
cu_nmnr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0
        tstb    %d0                     |check for extended
        beq     cu_wrexn                |if so, just write result
        cmpib   #1,%d0                  |check for single
        beq     cu_nmrs                 |fall through to double
|
| The move is fdmove or round precision is double.
|
cu_nmrd:
        movel   #2,%d0                  |set up the size for denorm
        movew   LOCAL_EX(%a0),%d1               |compare exponent to double threshold
        andw    #0x7fff,%d1     
        cmpw    #0x3c01,%d1
        bls     cu_nunfl
        bfextu  FPCR_MODE(%a6){#2:#2},%d1       |get rmode
        orl     #0x00020000,%d1         |or in rprec (double)
        clrl    %d0                     |clear g,r,s for round
        bclrb   #sign_bit,LOCAL_EX(%a0) |convert to internal format
        sne     LOCAL_SGN(%a0)
        bsrl    round
        bfclr   LOCAL_SGN(%a0){#0:#8}
        beqs    cu_nmrdc
        bsetb   #sign_bit,LOCAL_EX(%a0)
cu_nmrdc:
        movew   LOCAL_EX(%a0),%d1               |check for overflow
        andw    #0x7fff,%d1
        cmpw    #0x43ff,%d1
        bge     cu_novfl                |take care of overflow case
        bra     cu_wrexn
|
| The move is fsmove or round precision is single.
|
cu_nmrs:
        movel   #1,%d0
        movew   LOCAL_EX(%a0),%d1
        andw    #0x7fff,%d1
        cmpw    #0x3f81,%d1
        bls     cu_nunfl
        bfextu  FPCR_MODE(%a6){#2:#2},%d1
        orl     #0x00010000,%d1
        clrl    %d0
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        bsrl    round
        bfclr   LOCAL_SGN(%a0){#0:#8}
        beqs    cu_nmrsc
        bsetb   #sign_bit,LOCAL_EX(%a0)
cu_nmrsc:
        movew   LOCAL_EX(%a0),%d1
        andw    #0x7FFF,%d1
        cmpw    #0x407f,%d1
        blt     cu_wrexn
|
| The operand is above precision boundaries.  Use t_ovfl to
| generate the correct value.
|
cu_novfl:
        bsr     t_ovfl
        bra     cu_wrexn
|
| The operand is below precision boundaries.  Use denorm to
| generate the correct value.
|
cu_nunfl:
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        bsr     denorm
        bfclr   LOCAL_SGN(%a0){#0:#8}   |change back to IEEE ext format
        beqs    cu_nucont
        bsetb   #sign_bit,LOCAL_EX(%a0)
cu_nucont:
        bfextu  FPCR_MODE(%a6){#2:#2},%d1
        btstb   #2,CMDREG1B+1(%a6)      |check for rd
        bne     inst_d
        btstb   #6,CMDREG1B+1(%a6)      |check for rs
        bne     inst_s
        swap    %d1
        moveb   FPCR_MODE(%a6),%d1
        lsrb    #6,%d1
        swap    %d1
        bra     inst_sd
inst_d:
        orl     #0x00020000,%d1
        bra     inst_sd
inst_s:
        orl     #0x00010000,%d1
inst_sd:
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        bsrl    round
        bfclr   LOCAL_SGN(%a0){#0:#8}
        beqs    cu_nuflp
        bsetb   #sign_bit,LOCAL_EX(%a0)
cu_nuflp:
        btstb   #inex2_bit,FPSR_EXCEPT(%a6)
        beqs    cu_nuninx
        orl     #aunfl_mask,USER_FPSR(%a6) |if the round was inex, set AUNFL
cu_nuninx:
        tstl    LOCAL_HI(%a0)           |test for zero
        bnes    cu_nunzro
        tstl    LOCAL_LO(%a0)
        bnes    cu_nunzro
|
| The mantissa is zero from the denorm loop.  Check sign and rmode
| to see if rounding should have occurred which would leave the lsb.
|
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0               |isolate rmode
        cmpil   #0x20,%d0
        blts    cu_nzro
        bnes    cu_nrp
cu_nrm:
        tstw    LOCAL_EX(%a0)   |if positive, set lsb
        bges    cu_nzro
        btstb   #7,FPCR_MODE(%a6) |check for double
        beqs    cu_nincs
        bras    cu_nincd
cu_nrp:
        tstw    LOCAL_EX(%a0)   |if positive, set lsb
        blts    cu_nzro
        btstb   #7,FPCR_MODE(%a6) |check for double
        beqs    cu_nincs
cu_nincd:
        orl     #0x800,LOCAL_LO(%a0) |inc for double
        bra     cu_nunzro
cu_nincs:
        orl     #0x100,LOCAL_HI(%a0) |inc for single
        bra     cu_nunzro
cu_nzro:
        orl     #z_mask,USER_FPSR(%a6)
        moveb   STAG(%a6),%d0
        andib   #0xe0,%d0
        cmpib   #0x40,%d0               |check if input was tagged zero
        beqs    cu_numv
cu_nunzro:
        orl     #unfl_mask,USER_FPSR(%a6) |set unfl
cu_numv:
        movel   (%a0),ETEMP(%a6)
        movel   4(%a0),ETEMP_HI(%a6)
        movel   8(%a0),ETEMP_LO(%a6)
|
| Write the result to memory, setting the fpsr cc bits.  NaN and Inf
| bypass cu_wrexn.
|
cu_wrexn:
        tstw    LOCAL_EX(%a0)           |test for zero
        beqs    cu_wrzero
        cmpw    #0x8000,LOCAL_EX(%a0)   |test for zero
        bnes    cu_wreon
cu_wrzero:
        orl     #z_mask,USER_FPSR(%a6)  |set Z bit
cu_wreon:
        tstw    LOCAL_EX(%a0)
        bpl     wr_etemp
        orl     #neg_mask,USER_FPSR(%a6)
        bra     wr_etemp

|
| HANDLE SOURCE DENORM HERE
|
|                               ;clear denorm stag to norm
|                               ;write the new tag & ete15 to the fstack
mon_dnrm:
|
| At this point, check for the cases in which normalizing the 
| denorm produces incorrect results.
|
        tstb    DY_MO_FLG(%a6)  |all cases of dyadic instructions would
        bnes    nrm_src         |require normalization of denorm

| At this point:
|       monadic instructions:   fabs  = $18  fneg   = $1a  ftst   = $3a
|                               fmove = $00  fsmove = $40  fdmove = $44
|                               fsqrt = $05* fssqrt = $41  fdsqrt = $45
|                               (*fsqrt reencoded to $05)
|
        movew   CMDREG1B(%a6),%d0       |get command register
        andil   #0x7f,%d0                       |strip to only command word
|
| At this point, fabs, fneg, fsmove, fdmove, ftst, fsqrt, fssqrt, and 
| fdsqrt are possible.
| For cases fabs, fneg, fsmove, and fdmove goto spos (do not normalize)
| For cases fsqrt, fssqrt, and fdsqrt goto nrm_src (do normalize)
|
        btstl   #0,%d0
        bnes    nrm_src         |weed out fsqrt instructions
        st      CU_ONLY(%a6)    |set cu-only inst flag
        bra     cu_dnrm         |fmove, fabs, fneg, ftst 
|                               ;cases go to cu_dnrm
nrm_src:
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        bsr     nrm_set         |normalize number (exponent will go 
|                               ; negative)
        bclrb   #sign_bit,LOCAL_EX(%a0) |get rid of false sign

        bfclr   LOCAL_SGN(%a0){#0:#8}   |change back to IEEE ext format
        beqs    spos
        bsetb   #sign_bit,LOCAL_EX(%a0)
spos:
        bfclr   STAG(%a6){#0:#4}        |set tag to normalized, FPTE15 = 0
        bsetb   #4,STAG(%a6)    |set ETE15
        orb     #0xf0,DNRM_FLG(%a6)
normal:
        tstb    DNRM_FLG(%a6)   |check if any of the ops were denorms
        bne     ck_wrap         |if so, check if it is a potential
|                               ;wrap-around case
fix_stk:
        moveb   #0xfe,CU_SAVEPC(%a6)
        bclrb   #E1,E_BYTE(%a6)

        clrw    NMNEXC(%a6)

        st      RES_FLG(%a6)    |indicate that a restore is needed
        rts

|
| cu_dnrm handles all cu-only instructions (fmove, fabs, fneg, and
| ftst) completely in software without an frestore to the 040. 
|
cu_dnrm:
        st      CU_ONLY(%a6)
        movew   CMDREG1B(%a6),%d0
        andib   #0x3b,%d0               |isolate bits to select inst
        tstb    %d0
        beql    cu_dmove        |if zero, it is an fmove
        cmpib   #0x18,%d0
        beql    cu_dabs         |if $18, it is fabs
        cmpib   #0x1a,%d0
        beql    cu_dneg         |if $1a, it is fneg
|
| Inst is ftst.  Check the source operand and set the cc's accordingly.
| No write is done, so simply rts.
|
cu_dtst:
        movew   LOCAL_EX(%a0),%d0
        bclrl   #15,%d0
        sne     LOCAL_SGN(%a0)
        beqs    cu_dtpo
        orl     #neg_mask,USER_FPSR(%a6) |set N
cu_dtpo:
        cmpiw   #0x7fff,%d0     |test for inf/nan
        bnes    cu_dtcz
        tstl    LOCAL_HI(%a0)
        bnes    cu_dtn
        tstl    LOCAL_LO(%a0)
        bnes    cu_dtn
        orl     #inf_mask,USER_FPSR(%a6)
        rts
cu_dtn:
        orl     #nan_mask,USER_FPSR(%a6)
        movel   ETEMP_EX(%a6),FPTEMP_EX(%a6)    |set up fptemp sign for 
|                                               ;snan handler
        rts
cu_dtcz:
        tstl    LOCAL_HI(%a0)
        bnel    cu_dtsx
        tstl    LOCAL_LO(%a0)
        bnel    cu_dtsx
        orl     #z_mask,USER_FPSR(%a6)
cu_dtsx:
        rts
|
| Inst is fabs.  Execute the absolute value function on the input.
| Branch to the fmove code.
|
cu_dabs:
        bclrb   #7,LOCAL_EX(%a0)                |do abs
        bras    cu_dmove                |fmove code will finish
|
| Inst is fneg.  Execute the negate value function on the input.
| Fall though to the fmove code.
|
cu_dneg:
        bchgb   #7,LOCAL_EX(%a0)                |do neg
|
| Inst is fmove.  This code also handles all result writes.
| If bit 2 is set, round is forced to double.  If it is clear,
| and bit 6 is set, round is forced to single.  If both are clear,
| the round precision is found in the fpcr.  If the rounding precision
| is double or single, the result is zero, and the mode is checked
| to determine if the lsb of the result should be set.
|
cu_dmove:
        btstb   #2,CMDREG1B+1(%a6)      |check for rd
        bne     cu_dmrd
        btstb   #6,CMDREG1B+1(%a6)      |check for rs
        bne     cu_dmrs
|
| The move or operation is not with forced precision.  Use the
| FPCR_MODE byte to get rounding.
|
cu_dmnr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0
        tstb    %d0                     |check for extended
        beq     cu_wrexd                |if so, just write result
        cmpib   #1,%d0                  |check for single
        beq     cu_dmrs                 |fall through to double
|
| The move is fdmove or round precision is double.  Result is zero.
| Check rmode for rp or rm and set lsb accordingly.
|
cu_dmrd:
        bfextu  FPCR_MODE(%a6){#2:#2},%d1       |get rmode
        tstw    LOCAL_EX(%a0)           |check sign
        blts    cu_dmdn
        cmpib   #3,%d1                  |check for rp
        bne     cu_dpd                  |load double pos zero
        bra     cu_dpdr                 |load double pos zero w/lsb
cu_dmdn:
        cmpib   #2,%d1                  |check for rm
        bne     cu_dnd                  |load double neg zero
        bra     cu_dndr                 |load double neg zero w/lsb
|
| The move is fsmove or round precision is single.  Result is zero.
| Check for rp or rm and set lsb accordingly.
|
cu_dmrs:
        bfextu  FPCR_MODE(%a6){#2:#2},%d1       |get rmode
        tstw    LOCAL_EX(%a0)           |check sign
        blts    cu_dmsn
        cmpib   #3,%d1                  |check for rp
        bne     cu_spd                  |load single pos zero
        bra     cu_spdr                 |load single pos zero w/lsb
cu_dmsn:
        cmpib   #2,%d1                  |check for rm
        bne     cu_snd                  |load single neg zero
        bra     cu_sndr                 |load single neg zero w/lsb
|
| The precision is extended, so the result in etemp is correct.
| Simply set unfl (not inex2 or aunfl) and write the result to 
| the correct fp register.
cu_wrexd:
        orl     #unfl_mask,USER_FPSR(%a6)
        tstw    LOCAL_EX(%a0)
        beq     wr_etemp
        orl     #neg_mask,USER_FPSR(%a6)
        bra     wr_etemp
|
| These routines write +/- zero in double format.  The routines
| cu_dpdr and cu_dndr set the double lsb.
|
cu_dpd:
        movel   #0x3c010000,LOCAL_EX(%a0)       |force pos double zero
        clrl    LOCAL_HI(%a0)
        clrl    LOCAL_LO(%a0)
        orl     #z_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_dpdr:
        movel   #0x3c010000,LOCAL_EX(%a0)       |force pos double zero
        clrl    LOCAL_HI(%a0)
        movel   #0x800,LOCAL_LO(%a0)    |with lsb set
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_dnd:
        movel   #0xbc010000,LOCAL_EX(%a0)       |force pos double zero
        clrl    LOCAL_HI(%a0)
        clrl    LOCAL_LO(%a0)
        orl     #z_mask,USER_FPSR(%a6)
        orl     #neg_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_dndr:
        movel   #0xbc010000,LOCAL_EX(%a0)       |force pos double zero
        clrl    LOCAL_HI(%a0)
        movel   #0x800,LOCAL_LO(%a0)    |with lsb set
        orl     #neg_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
|
| These routines write +/- zero in single format.  The routines
| cu_dpdr and cu_dndr set the single lsb.
|
cu_spd:
        movel   #0x3f810000,LOCAL_EX(%a0)       |force pos single zero
        clrl    LOCAL_HI(%a0)
        clrl    LOCAL_LO(%a0)
        orl     #z_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_spdr:
        movel   #0x3f810000,LOCAL_EX(%a0)       |force pos single zero
        movel   #0x100,LOCAL_HI(%a0)    |with lsb set
        clrl    LOCAL_LO(%a0)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_snd:
        movel   #0xbf810000,LOCAL_EX(%a0)       |force pos single zero
        clrl    LOCAL_HI(%a0)
        clrl    LOCAL_LO(%a0)
        orl     #z_mask,USER_FPSR(%a6)
        orl     #neg_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_sndr:
        movel   #0xbf810000,LOCAL_EX(%a0)       |force pos single zero
        movel   #0x100,LOCAL_HI(%a0)    |with lsb set
        clrl    LOCAL_LO(%a0)
        orl     #neg_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
        
|
| This code checks for 16-bit overflow conditions on dyadic
| operations which are not restorable into the floating-point
| unit and must be completed in software.  Basically, this
| condition exists with a very large norm and a denorm.  One
| of the operands must be denormalized to enter this code.
|
| Flags used:
|       DY_MO_FLG contains 0 for monadic op, $ff for dyadic
|       DNRM_FLG contains $00 for neither op denormalized
|                         $0f for the destination op denormalized
|                         $f0 for the source op denormalized
|                         $ff for both ops denormalized
|
| The wrap-around condition occurs for add, sub, div, and cmp
| when 
|
|       abs(dest_exp - src_exp) >= $8000
|
| and for mul when
|
|       (dest_exp + src_exp) < $0
|
| we must process the operation here if this case is true.
|
| The rts following the frcfpn routine is the exit from res_func
| for this condition.  The restore flag (RES_FLG) is left clear.
| No frestore is done unless an exception is to be reported.
|
| For fadd: 
|       if(sign_of(dest) != sign_of(src))
|               replace exponent of src with $3fff (keep sign)
|               use fpu to perform dest+new_src (user's rmode and X)
|               clr sticky
|       else
|               set sticky
|       call round with user's precision and mode
|       move result to fpn and wbtemp
|
| For fsub:
|       if(sign_of(dest) == sign_of(src))
|               replace exponent of src with $3fff (keep sign)
|               use fpu to perform dest+new_src (user's rmode and X)
|               clr sticky
|       else
|               set sticky
|       call round with user's precision and mode
|       move result to fpn and wbtemp
|
| For fdiv/fsgldiv:
|       if(both operands are denorm)
|               restore_to_fpu;
|       if(dest is norm)
|               force_ovf;
|       else(dest is denorm)
|               force_unf:
|
| For fcmp:
|       if(dest is norm)
|               N = sign_of(dest);
|       else(dest is denorm)
|               N = sign_of(src);
|
| For fmul:
|       if(both operands are denorm)
|               force_unf;
|       if((dest_exp + src_exp) < 0)
|               force_unf:
|       else
|               restore_to_fpu;
|
| local equates:
        .set    addcode,0x22
        .set    subcode,0x28
        .set    mulcode,0x23
        .set    divcode,0x20
        .set    cmpcode,0x38
ck_wrap:
        | tstb  DY_MO_FLG(%a6)  ;check for fsqrt
        beq     fix_stk         |if zero, it is fsqrt
        movew   CMDREG1B(%a6),%d0
        andiw   #0x3b,%d0               |strip to command bits
        cmpiw   #addcode,%d0
        beq     wrap_add
        cmpiw   #subcode,%d0
        beq     wrap_sub
        cmpiw   #mulcode,%d0
        beq     wrap_mul
        cmpiw   #cmpcode,%d0
        beq     wrap_cmp
|
| Inst is fdiv.  
|
wrap_div:
        cmpb    #0xff,DNRM_FLG(%a6) |if both ops denorm, 
        beq     fix_stk          |restore to fpu
|
| One of the ops is denormalized.  Test for wrap condition
| and force the result.
|
        cmpb    #0x0f,DNRM_FLG(%a6) |check for dest denorm
        bnes    div_srcd
div_destd:
        bsrl    ckinf_ns
        bne     fix_stk
        bfextu  ETEMP_EX(%a6){#1:#15},%d0       |get src exp (always pos)
        bfexts  FPTEMP_EX(%a6){#1:#15},%d1      |get dest exp (always neg)
        subl    %d1,%d0                 |subtract dest from src
        cmpl    #0x7fff,%d0
        blt     fix_stk                 |if less, not wrap case
        clrb    WBTEMP_SGN(%a6)
        movew   ETEMP_EX(%a6),%d0               |find the sign of the result
        movew   FPTEMP_EX(%a6),%d1
        eorw    %d1,%d0
        andiw   #0x8000,%d0
        beq     force_unf
        st      WBTEMP_SGN(%a6)
        bra     force_unf

ckinf_ns:
        moveb   STAG(%a6),%d0           |check source tag for inf or nan
        bra     ck_in_com
ckinf_nd:
        moveb   DTAG(%a6),%d0           |check destination tag for inf or nan
ck_in_com:      
        andib   #0x60,%d0                       |isolate tag bits
        cmpb    #0x40,%d0                       |is it inf?
        beq     nan_or_inf              |not wrap case
        cmpb    #0x60,%d0                       |is it nan?
        beq     nan_or_inf              |yes, not wrap case?
        cmpb    #0x20,%d0                       |is it a zero?
        beq     nan_or_inf              |yes
        clrl    %d0
        rts                             |then ; it is either a zero of norm,
|                                       ;check wrap case
nan_or_inf:
        moveql  #-1,%d0
        rts



div_srcd:
        bsrl    ckinf_nd
        bne     fix_stk
        bfextu  FPTEMP_EX(%a6){#1:#15},%d0      |get dest exp (always pos)
        bfexts  ETEMP_EX(%a6){#1:#15},%d1       |get src exp (always neg)
        subl    %d1,%d0                 |subtract src from dest
        cmpl    #0x8000,%d0
        blt     fix_stk                 |if less, not wrap case
        clrb    WBTEMP_SGN(%a6)
        movew   ETEMP_EX(%a6),%d0               |find the sign of the result
        movew   FPTEMP_EX(%a6),%d1
        eorw    %d1,%d0
        andiw   #0x8000,%d0
        beqs    force_ovf
        st      WBTEMP_SGN(%a6)
|
| This code handles the case of the instruction resulting in 
| an overflow condition.
|
force_ovf:
        bclrb   #E1,E_BYTE(%a6)
        orl     #ovfl_inx_mask,USER_FPSR(%a6)
        clrw    NMNEXC(%a6)
        leal    WBTEMP(%a6),%a0         |point a0 to memory location
        movew   CMDREG1B(%a6),%d0
        btstl   #6,%d0                  |test for forced precision
        beqs    frcovf_fpcr
        btstl   #2,%d0                  |check for double
        bnes    frcovf_dbl
        movel   #0x1,%d0                        |inst is forced single
        bras    frcovf_rnd
frcovf_dbl:
        movel   #0x2,%d0                        |inst is forced double
        bras    frcovf_rnd
frcovf_fpcr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0       |inst not forced - use fpcr prec
frcovf_rnd:

| The 881/882 does not set inex2 for the following case, so the 
| line is commented out to be compatible with 881/882
|       tst.b   %d0
|       beq.b   frcovf_x
|       or.l    #inex2_mask,USER_FPSR(%a6) ;if prec is s or d, set inex2

|frcovf_x:
        bsrl    ovf_res                 |get correct result based on
|                                       ;round precision/mode.  This 
|                                       ;sets FPSR_CC correctly
|                                       ;returns in external format
        bfclr   WBTEMP_SGN(%a6){#0:#8}
        beq     frcfpn
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpn
|
| Inst is fadd.
|
wrap_add:
        cmpb    #0xff,DNRM_FLG(%a6) |if both ops denorm, 
        beq     fix_stk          |restore to fpu
|
| One of the ops is denormalized.  Test for wrap condition
| and complete the instruction.
|
        cmpb    #0x0f,DNRM_FLG(%a6) |check for dest denorm
        bnes    add_srcd
add_destd:
        bsrl    ckinf_ns
        bne     fix_stk
        bfextu  ETEMP_EX(%a6){#1:#15},%d0       |get src exp (always pos)
        bfexts  FPTEMP_EX(%a6){#1:#15},%d1      |get dest exp (always neg)
        subl    %d1,%d0                 |subtract dest from src
        cmpl    #0x8000,%d0
        blt     fix_stk                 |if less, not wrap case
        bra     add_wrap
add_srcd:
        bsrl    ckinf_nd
        bne     fix_stk
        bfextu  FPTEMP_EX(%a6){#1:#15},%d0      |get dest exp (always pos)
        bfexts  ETEMP_EX(%a6){#1:#15},%d1       |get src exp (always neg)
        subl    %d1,%d0                 |subtract src from dest
        cmpl    #0x8000,%d0
        blt     fix_stk                 |if less, not wrap case
|
| Check the signs of the operands.  If they are unlike, the fpu
| can be used to add the norm and 1.0 with the sign of the
| denorm and it will correctly generate the result in extended
| precision.  We can then call round with no sticky and the result
| will be correct for the user's rounding mode and precision.  If
| the signs are the same, we call round with the sticky bit set
| and the result will be correct for the user's rounding mode and
| precision.
|
add_wrap:
        movew   ETEMP_EX(%a6),%d0
        movew   FPTEMP_EX(%a6),%d1
        eorw    %d1,%d0
        andiw   #0x8000,%d0
        beq     add_same
|
| The signs are unlike.
|
        cmpb    #0x0f,DNRM_FLG(%a6) |is dest the denorm?
        bnes    add_u_srcd
        movew   FPTEMP_EX(%a6),%d0
        andiw   #0x8000,%d0
        orw     #0x3fff,%d0     |force the exponent to +/- 1
        movew   %d0,FPTEMP_EX(%a6) |in the denorm
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        fmovel  %d0,%fpcr               |set up users rmode and X
        fmovex  ETEMP(%a6),%fp0
        faddx   FPTEMP(%a6),%fp0
        leal    WBTEMP(%a6),%a0 |point a0 to wbtemp in frame
        fmovel  %fpsr,%d1
        orl     %d1,USER_FPSR(%a6) |capture cc's and inex from fadd
        fmovex  %fp0,WBTEMP(%a6)        |write result to memory
        lsrl    #4,%d0          |put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          |put precision in upper word
        swap    %d1
        orl     %d0,%d1         |set up for round call
        clrl    %d0             |force sticky to zero
        bclrb   #sign_bit,WBTEMP_EX(%a6)
        sne     WBTEMP_SGN(%a6)
        bsrl    round           |round result to users rmode & prec
        bfclr   WBTEMP_SGN(%a6){#0:#8}  |convert back to IEEE ext format
        beq     frcfpnr
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpnr
add_u_srcd:
        movew   ETEMP_EX(%a6),%d0
        andiw   #0x8000,%d0
        orw     #0x3fff,%d0     |force the exponent to +/- 1
        movew   %d0,ETEMP_EX(%a6) |in the denorm
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        fmovel  %d0,%fpcr               |set up users rmode and X
        fmovex  ETEMP(%a6),%fp0
        faddx   FPTEMP(%a6),%fp0
        fmovel  %fpsr,%d1
        orl     %d1,USER_FPSR(%a6) |capture cc's and inex from fadd
        leal    WBTEMP(%a6),%a0 |point a0 to wbtemp in frame
        fmovex  %fp0,WBTEMP(%a6)        |write result to memory
        lsrl    #4,%d0          |put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          |put precision in upper word
        swap    %d1
        orl     %d0,%d1         |set up for round call
        clrl    %d0             |force sticky to zero
        bclrb   #sign_bit,WBTEMP_EX(%a6)
        sne     WBTEMP_SGN(%a6) |use internal format for round
        bsrl    round           |round result to users rmode & prec
        bfclr   WBTEMP_SGN(%a6){#0:#8}  |convert back to IEEE ext format
        beq     frcfpnr
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpnr
|
| Signs are alike:
|
add_same:
        cmpb    #0x0f,DNRM_FLG(%a6) |is dest the denorm?
        bnes    add_s_srcd
add_s_destd:
        leal    ETEMP(%a6),%a0
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        lsrl    #4,%d0          |put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          |put precision in upper word
        swap    %d1
        orl     %d0,%d1         |set up for round call
        movel   #0x20000000,%d0 |set sticky for round
        bclrb   #sign_bit,ETEMP_EX(%a6)
        sne     ETEMP_SGN(%a6)
        bsrl    round           |round result to users rmode & prec
        bfclr   ETEMP_SGN(%a6){#0:#8}   |convert back to IEEE ext format
        beqs    add_s_dclr
        bsetb   #sign_bit,ETEMP_EX(%a6)
add_s_dclr:
        leal    WBTEMP(%a6),%a0
        movel   ETEMP(%a6),(%a0)        |write result to wbtemp
        movel   ETEMP_HI(%a6),4(%a0)
        movel   ETEMP_LO(%a6),8(%a0)
        tstw    ETEMP_EX(%a6)
        bgt     add_ckovf
        orl     #neg_mask,USER_FPSR(%a6)
        bra     add_ckovf
add_s_srcd:
        leal    FPTEMP(%a6),%a0
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        lsrl    #4,%d0          |put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          |put precision in upper word
        swap    %d1
        orl     %d0,%d1         |set up for round call
        movel   #0x20000000,%d0 |set sticky for round
        bclrb   #sign_bit,FPTEMP_EX(%a6)
        sne     FPTEMP_SGN(%a6)
        bsrl    round           |round result to users rmode & prec
        bfclr   FPTEMP_SGN(%a6){#0:#8}  |convert back to IEEE ext format
        beqs    add_s_sclr
        bsetb   #sign_bit,FPTEMP_EX(%a6)
add_s_sclr:
        leal    WBTEMP(%a6),%a0
        movel   FPTEMP(%a6),(%a0)       |write result to wbtemp
        movel   FPTEMP_HI(%a6),4(%a0)
        movel   FPTEMP_LO(%a6),8(%a0)
        tstw    FPTEMP_EX(%a6)
        bgt     add_ckovf
        orl     #neg_mask,USER_FPSR(%a6)
add_ckovf:
        movew   WBTEMP_EX(%a6),%d0
        andiw   #0x7fff,%d0
        cmpiw   #0x7fff,%d0
        bne     frcfpnr
|
| The result has overflowed to $7fff exponent.  Set I, ovfl,
| and aovfl, and clr the mantissa (incorrectly set by the
| round routine.)
|
        orl     #inf_mask+ovfl_inx_mask,USER_FPSR(%a6)  
        clrl    4(%a0)
        bra     frcfpnr
|
| Inst is fsub.
|
wrap_sub:
        cmpb    #0xff,DNRM_FLG(%a6) |if both ops denorm, 
        beq     fix_stk          |restore to fpu
|
| One of the ops is denormalized.  Test for wrap condition
| and complete the instruction.
|
        cmpb    #0x0f,DNRM_FLG(%a6) |check for dest denorm
        bnes    sub_srcd
sub_destd:
        bsrl    ckinf_ns
        bne     fix_stk
        bfextu  ETEMP_EX(%a6){#1:#15},%d0       |get src exp (always pos)
        bfexts  FPTEMP_EX(%a6){#1:#15},%d1      |get dest exp (always neg)
        subl    %d1,%d0                 |subtract src from dest
        cmpl    #0x8000,%d0
        blt     fix_stk                 |if less, not wrap case
        bra     sub_wrap
sub_srcd:
        bsrl    ckinf_nd
        bne     fix_stk
        bfextu  FPTEMP_EX(%a6){#1:#15},%d0      |get dest exp (always pos)
        bfexts  ETEMP_EX(%a6){#1:#15},%d1       |get src exp (always neg)
        subl    %d1,%d0                 |subtract dest from src
        cmpl    #0x8000,%d0
        blt     fix_stk                 |if less, not wrap case
|
| Check the signs of the operands.  If they are alike, the fpu
| can be used to subtract from the norm 1.0 with the sign of the
| denorm and it will correctly generate the result in extended
| precision.  We can then call round with no sticky and the result
| will be correct for the user's rounding mode and precision.  If
| the signs are unlike, we call round with the sticky bit set
| and the result will be correct for the user's rounding mode and
| precision.
|
sub_wrap:
        movew   ETEMP_EX(%a6),%d0
        movew   FPTEMP_EX(%a6),%d1
        eorw    %d1,%d0
        andiw   #0x8000,%d0
        bne     sub_diff
|
| The signs are alike.
|
        cmpb    #0x0f,DNRM_FLG(%a6) |is dest the denorm?
        bnes    sub_u_srcd
        movew   FPTEMP_EX(%a6),%d0
        andiw   #0x8000,%d0
        orw     #0x3fff,%d0     |force the exponent to +/- 1
        movew   %d0,FPTEMP_EX(%a6) |in the denorm
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        fmovel  %d0,%fpcr               |set up users rmode and X
        fmovex  FPTEMP(%a6),%fp0
        fsubx   ETEMP(%a6),%fp0
        fmovel  %fpsr,%d1
        orl     %d1,USER_FPSR(%a6) |capture cc's and inex from fadd
        leal    WBTEMP(%a6),%a0 |point a0 to wbtemp in frame
        fmovex  %fp0,WBTEMP(%a6)        |write result to memory
        lsrl    #4,%d0          |put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          |put precision in upper word
        swap    %d1
        orl     %d0,%d1         |set up for round call
        clrl    %d0             |force sticky to zero
        bclrb   #sign_bit,WBTEMP_EX(%a6)
        sne     WBTEMP_SGN(%a6)
        bsrl    round           |round result to users rmode & prec
        bfclr   WBTEMP_SGN(%a6){#0:#8}  |convert back to IEEE ext format
        beq     frcfpnr
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpnr
sub_u_srcd:
        movew   ETEMP_EX(%a6),%d0
        andiw   #0x8000,%d0
        orw     #0x3fff,%d0     |force the exponent to +/- 1
        movew   %d0,ETEMP_EX(%a6) |in the denorm
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        fmovel  %d0,%fpcr               |set up users rmode and X
        fmovex  FPTEMP(%a6),%fp0
        fsubx   ETEMP(%a6),%fp0
        fmovel  %fpsr,%d1
        orl     %d1,USER_FPSR(%a6) |capture cc's and inex from fadd
        leal    WBTEMP(%a6),%a0 |point a0 to wbtemp in frame
        fmovex  %fp0,WBTEMP(%a6)        |write result to memory
        lsrl    #4,%d0          |put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          |put precision in upper word
        swap    %d1
        orl     %d0,%d1         |set up for round call
        clrl    %d0             |force sticky to zero
        bclrb   #sign_bit,WBTEMP_EX(%a6)
        sne     WBTEMP_SGN(%a6)
        bsrl    round           |round result to users rmode & prec
        bfclr   WBTEMP_SGN(%a6){#0:#8}  |convert back to IEEE ext format
        beq     frcfpnr
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpnr
|
| Signs are unlike:
|
sub_diff:
        cmpb    #0x0f,DNRM_FLG(%a6) |is dest the denorm?
        bnes    sub_s_srcd
sub_s_destd:
        leal    ETEMP(%a6),%a0
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        lsrl    #4,%d0          |put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          |put precision in upper word
        swap    %d1
        orl     %d0,%d1         |set up for round call
        movel   #0x20000000,%d0 |set sticky for round
|
| Since the dest is the denorm, the sign is the opposite of the
| norm sign.
|
        eoriw   #0x8000,ETEMP_EX(%a6)   |flip sign on result
        tstw    ETEMP_EX(%a6)
        bgts    sub_s_dwr
        orl     #neg_mask,USER_FPSR(%a6)
sub_s_dwr:
        bclrb   #sign_bit,ETEMP_EX(%a6)
        sne     ETEMP_SGN(%a6)
        bsrl    round           |round result to users rmode & prec
        bfclr   ETEMP_SGN(%a6){#0:#8}   |convert back to IEEE ext format
        beqs    sub_s_dclr
        bsetb   #sign_bit,ETEMP_EX(%a6)
sub_s_dclr:
        leal    WBTEMP(%a6),%a0
        movel   ETEMP(%a6),(%a0)        |write result to wbtemp
        movel   ETEMP_HI(%a6),4(%a0)
        movel   ETEMP_LO(%a6),8(%a0)
        bra     sub_ckovf
sub_s_srcd:
        leal    FPTEMP(%a6),%a0
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        lsrl    #4,%d0          |put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          |put precision in upper word
        swap    %d1
        orl     %d0,%d1         |set up for round call
        movel   #0x20000000,%d0 |set sticky for round
        bclrb   #sign_bit,FPTEMP_EX(%a6)
        sne     FPTEMP_SGN(%a6)
        bsrl    round           |round result to users rmode & prec
        bfclr   FPTEMP_SGN(%a6){#0:#8}  |convert back to IEEE ext format
        beqs    sub_s_sclr
        bsetb   #sign_bit,FPTEMP_EX(%a6)
sub_s_sclr:
        leal    WBTEMP(%a6),%a0
        movel   FPTEMP(%a6),(%a0)       |write result to wbtemp
        movel   FPTEMP_HI(%a6),4(%a0)
        movel   FPTEMP_LO(%a6),8(%a0)
        tstw    FPTEMP_EX(%a6)
        bgt     sub_ckovf
        orl     #neg_mask,USER_FPSR(%a6)
sub_ckovf:
        movew   WBTEMP_EX(%a6),%d0
        andiw   #0x7fff,%d0
        cmpiw   #0x7fff,%d0
        bne     frcfpnr
|
| The result has overflowed to $7fff exponent.  Set I, ovfl,
| and aovfl, and clr the mantissa (incorrectly set by the
| round routine.)
|
        orl     #inf_mask+ovfl_inx_mask,USER_FPSR(%a6)  
        clrl    4(%a0)
        bra     frcfpnr
|
| Inst is fcmp.
|
wrap_cmp:
        cmpb    #0xff,DNRM_FLG(%a6) |if both ops denorm, 
        beq     fix_stk          |restore to fpu
|
| One of the ops is denormalized.  Test for wrap condition
| and complete the instruction.
|
        cmpb    #0x0f,DNRM_FLG(%a6) |check for dest denorm
        bnes    cmp_srcd
cmp_destd:
        bsrl    ckinf_ns
        bne     fix_stk
        bfextu  ETEMP_EX(%a6){#1:#15},%d0       |get src exp (always pos)
        bfexts  FPTEMP_EX(%a6){#1:#15},%d1      |get dest exp (always neg)
        subl    %d1,%d0                 |subtract dest from src
        cmpl    #0x8000,%d0
        blt     fix_stk                 |if less, not wrap case
        tstw    ETEMP_EX(%a6)           |set N to ~sign_of(src)
        bge     cmp_setn
        rts
cmp_srcd:
        bsrl    ckinf_nd
        bne     fix_stk
        bfextu  FPTEMP_EX(%a6){#1:#15},%d0      |get dest exp (always pos)
        bfexts  ETEMP_EX(%a6){#1:#15},%d1       |get src exp (always neg)
        subl    %d1,%d0                 |subtract src from dest
        cmpl    #0x8000,%d0
        blt     fix_stk                 |if less, not wrap case
        tstw    FPTEMP_EX(%a6)          |set N to sign_of(dest)
        blt     cmp_setn
        rts
cmp_setn:
        orl     #neg_mask,USER_FPSR(%a6)
        rts

|
| Inst is fmul.
|
wrap_mul:
        cmpb    #0xff,DNRM_FLG(%a6) |if both ops denorm, 
        beq     force_unf       |force an underflow (really!)
|
| One of the ops is denormalized.  Test for wrap condition
| and complete the instruction.
|
        cmpb    #0x0f,DNRM_FLG(%a6) |check for dest denorm
        bnes    mul_srcd
mul_destd:
        bsrl    ckinf_ns
        bne     fix_stk
        bfextu  ETEMP_EX(%a6){#1:#15},%d0       |get src exp (always pos)
        bfexts  FPTEMP_EX(%a6){#1:#15},%d1      |get dest exp (always neg)
        addl    %d1,%d0                 |subtract dest from src
        bgt     fix_stk
        bra     force_unf
mul_srcd:
        bsrl    ckinf_nd
        bne     fix_stk
        bfextu  FPTEMP_EX(%a6){#1:#15},%d0      |get dest exp (always pos)
        bfexts  ETEMP_EX(%a6){#1:#15},%d1       |get src exp (always neg)
        addl    %d1,%d0                 |subtract src from dest
        bgt     fix_stk
        
|
| This code handles the case of the instruction resulting in 
| an underflow condition.
|
force_unf:
        bclrb   #E1,E_BYTE(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        clrw    NMNEXC(%a6)
        clrb    WBTEMP_SGN(%a6)
        movew   ETEMP_EX(%a6),%d0               |find the sign of the result
        movew   FPTEMP_EX(%a6),%d1
        eorw    %d1,%d0
        andiw   #0x8000,%d0
        beqs    frcunfcont
        st      WBTEMP_SGN(%a6)
frcunfcont:
        lea     WBTEMP(%a6),%a0         |point a0 to memory location
        movew   CMDREG1B(%a6),%d0
        btstl   #6,%d0                  |test for forced precision
        beqs    frcunf_fpcr
        btstl   #2,%d0                  |check for double
        bnes    frcunf_dbl
        movel   #0x1,%d0                        |inst is forced single
        bras    frcunf_rnd
frcunf_dbl:
        movel   #0x2,%d0                        |inst is forced double
        bras    frcunf_rnd
frcunf_fpcr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0       |inst not forced - use fpcr prec
frcunf_rnd:
        bsrl    unf_sub                 |get correct result based on
|                                       ;round precision/mode.  This 
|                                       ;sets FPSR_CC correctly
        bfclr   WBTEMP_SGN(%a6){#0:#8}  |convert back to IEEE ext format
        beqs    frcfpn
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpn

|
| Write the result to the user's fpn.  All results must be HUGE to be
| written; otherwise the results would have overflowed or underflowed.
| If the rounding precision is single or double, the ovf_res routine
| is needed to correctly supply the max value.
|
frcfpnr:
        movew   CMDREG1B(%a6),%d0
        btstl   #6,%d0                  |test for forced precision
        beqs    frcfpn_fpcr
        btstl   #2,%d0                  |check for double
        bnes    frcfpn_dbl
        movel   #0x1,%d0                        |inst is forced single
        bras    frcfpn_rnd
frcfpn_dbl:
        movel   #0x2,%d0                        |inst is forced double
        bras    frcfpn_rnd
frcfpn_fpcr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0       |inst not forced - use fpcr prec
        tstb    %d0
        beqs    frcfpn                  |if extended, write what you got
frcfpn_rnd:
        bclrb   #sign_bit,WBTEMP_EX(%a6)
        sne     WBTEMP_SGN(%a6)
        bsrl    ovf_res                 |get correct result based on
|                                       ;round precision/mode.  This 
|                                       ;sets FPSR_CC correctly
        bfclr   WBTEMP_SGN(%a6){#0:#8}  |convert back to IEEE ext format
        beqs    frcfpn_clr
        bsetb   #sign_bit,WBTEMP_EX(%a6)
frcfpn_clr:
        orl     #ovfinx_mask,USER_FPSR(%a6)
| 
| Perform the write.
|
frcfpn:
        bfextu  CMDREG1B(%a6){#6:#3},%d0        |extract fp destination register
        cmpib   #3,%d0
        bles    frc0123                 |check if dest is fp0-fp3
        movel   #7,%d1
        subl    %d0,%d1
        clrl    %d0
        bsetl   %d1,%d0
        fmovemx WBTEMP(%a6),%d0
        rts
frc0123:
        cmpib   #0,%d0
        beqs    frc0_dst
        cmpib   #1,%d0
        beqs    frc1_dst 
        cmpib   #2,%d0
        beqs    frc2_dst 
frc3_dst:
        movel   WBTEMP_EX(%a6),USER_FP3(%a6)
        movel   WBTEMP_HI(%a6),USER_FP3+4(%a6)
        movel   WBTEMP_LO(%a6),USER_FP3+8(%a6)
        rts
frc2_dst:
        movel   WBTEMP_EX(%a6),USER_FP2(%a6)
        movel   WBTEMP_HI(%a6),USER_FP2+4(%a6)
        movel   WBTEMP_LO(%a6),USER_FP2+8(%a6)
        rts
frc1_dst:
        movel   WBTEMP_EX(%a6),USER_FP1(%a6)
        movel   WBTEMP_HI(%a6),USER_FP1+4(%a6)
        movel   WBTEMP_LO(%a6),USER_FP1+8(%a6)
        rts
frc0_dst:
        movel   WBTEMP_EX(%a6),USER_FP0(%a6)
        movel   WBTEMP_HI(%a6),USER_FP0+4(%a6)
        movel   WBTEMP_LO(%a6),USER_FP0+8(%a6)
        rts

|
| Write etemp to fpn.
| A check is made on enabled and signalled snan exceptions,
| and the destination is not overwritten if this condition exists.
| This code is designed to make fmoveins of unsupported data types
| faster.
|
wr_etemp:
        btstb   #snan_bit,FPSR_EXCEPT(%a6)      |if snan is set, and
        beqs    fmoveinc                |enabled, force restore
        btstb   #snan_bit,FPCR_ENABLE(%a6) |and don't overwrite
        beqs    fmoveinc                |the dest
        movel   ETEMP_EX(%a6),FPTEMP_EX(%a6)    |set up fptemp sign for 
|                                               ;snan handler
        tstb    ETEMP(%a6)              |check for negative
        blts    snan_neg
        rts
snan_neg:
        orl     #neg_bit,USER_FPSR(%a6) |snan is negative; set N
        rts
fmoveinc:
        clrw    NMNEXC(%a6)
        bclrb   #E1,E_BYTE(%a6)
        moveb   STAG(%a6),%d0           |check if stag is inf
        andib   #0xe0,%d0
        cmpib   #0x40,%d0
        bnes    fminc_cnan
        orl     #inf_mask,USER_FPSR(%a6) |if inf, nothing yet has set I
        tstw    LOCAL_EX(%a0)           |check sign
        bges    fminc_con
        orl     #neg_mask,USER_FPSR(%a6)
        bra     fminc_con
fminc_cnan:
        cmpib   #0x60,%d0                       |check if stag is NaN
        bnes    fminc_czero
        orl     #nan_mask,USER_FPSR(%a6) |if nan, nothing yet has set NaN
        movel   ETEMP_EX(%a6),FPTEMP_EX(%a6)    |set up fptemp sign for 
|                                               ;snan handler
        tstw    LOCAL_EX(%a0)           |check sign
        bges    fminc_con
        orl     #neg_mask,USER_FPSR(%a6)
        bra     fminc_con
fminc_czero:
        cmpib   #0x20,%d0                       |check if zero
        bnes    fminc_con
        orl     #z_mask,USER_FPSR(%a6)  |if zero, set Z
        tstw    LOCAL_EX(%a0)           |check sign
        bges    fminc_con
        orl     #neg_mask,USER_FPSR(%a6)
fminc_con:
        bfextu  CMDREG1B(%a6){#6:#3},%d0        |extract fp destination register
        cmpib   #3,%d0
        bles    fp0123                  |check if dest is fp0-fp3
        movel   #7,%d1
        subl    %d0,%d1
        clrl    %d0
        bsetl   %d1,%d0
        fmovemx ETEMP(%a6),%d0
        rts

fp0123:
        cmpib   #0,%d0
        beqs    fp0_dst
        cmpib   #1,%d0
        beqs    fp1_dst 
        cmpib   #2,%d0
        beqs    fp2_dst 
fp3_dst:
        movel   ETEMP_EX(%a6),USER_FP3(%a6)
        movel   ETEMP_HI(%a6),USER_FP3+4(%a6)
        movel   ETEMP_LO(%a6),USER_FP3+8(%a6)
        rts
fp2_dst:
        movel   ETEMP_EX(%a6),USER_FP2(%a6)
        movel   ETEMP_HI(%a6),USER_FP2+4(%a6)
        movel   ETEMP_LO(%a6),USER_FP2+8(%a6)
        rts
fp1_dst:
        movel   ETEMP_EX(%a6),USER_FP1(%a6)
        movel   ETEMP_HI(%a6),USER_FP1+4(%a6)
        movel   ETEMP_LO(%a6),USER_FP1+8(%a6)
        rts
fp0_dst:
        movel   ETEMP_EX(%a6),USER_FP0(%a6)
        movel   ETEMP_HI(%a6),USER_FP0+4(%a6)
        movel   ETEMP_LO(%a6),USER_FP0+8(%a6)
        rts

opclass3:
        st      CU_ONLY(%a6)
        movew   CMDREG1B(%a6),%d0       |check if packed moveout
        andiw   #0x0c00,%d0     |isolate last 2 bits of size field
        cmpiw   #0x0c00,%d0     |if size is 011 or 111, it is packed
        beq     pack_out        |else it is norm or denorm
        bra     mv_out

        
|
|       MOVE OUT
|

mv_tbl:
        .long   li
        .long   sgp
        .long   xp
        .long   mvout_end       |should never be taken
        .long   wi
        .long   dp
        .long   bi
        .long   mvout_end       |should never be taken
mv_out:
        bfextu  CMDREG1B(%a6){#3:#3},%d1        |put source specifier in d1
        leal    mv_tbl,%a0
        movel   %a0@(%d1:l:4),%a0
        jmp     (%a0)

|
| This exit is for move-out to memory.  The aunfl bit is 
| set if the result is inex and unfl is signalled.
|
mvout_end:
        btstb   #inex2_bit,FPSR_EXCEPT(%a6)
        beqs    no_aufl
        btstb   #unfl_bit,FPSR_EXCEPT(%a6)
        beqs    no_aufl
        bsetb   #aunfl_bit,FPSR_AEXCEPT(%a6)
no_aufl:
        clrw    NMNEXC(%a6)
        bclrb   #E1,E_BYTE(%a6)
        fmovel  #0,%FPSR                        |clear any cc bits from res_func
|
| Return ETEMP to extended format from internal extended format so
| that gen_except will have a correctly signed value for ovfl/unfl
| handlers.
|
        bfclr   ETEMP_SGN(%a6){#0:#8}
        beqs    mvout_con
        bsetb   #sign_bit,ETEMP_EX(%a6)
mvout_con:
        rts
|
| This exit is for move-out to int register.  The aunfl bit is 
| not set in any case for this move.
|
mvouti_end:
        clrw    NMNEXC(%a6)
        bclrb   #E1,E_BYTE(%a6)
        fmovel  #0,%FPSR                        |clear any cc bits from res_func
|
| Return ETEMP to extended format from internal extended format so
| that gen_except will have a correctly signed value for ovfl/unfl
| handlers.
|
        bfclr   ETEMP_SGN(%a6){#0:#8}
        beqs    mvouti_con
        bsetb   #sign_bit,ETEMP_EX(%a6)
mvouti_con:
        rts
|
| li is used to handle a long integer source specifier
|

li:
        moveql  #4,%d0          |set byte count

        btstb   #7,STAG(%a6)    |check for extended denorm
        bne     int_dnrm        |if so, branch

        fmovemx ETEMP(%a6),%fp0-%fp0
        fcmpd   #0x41dfffffffc00000,%fp0
| 41dfffffffc00000 in dbl prec = 401d0000fffffffe00000000 in ext prec
        fbge    lo_plrg 
        fcmpd   #0xc1e0000000000000,%fp0
| c1e0000000000000 in dbl prec = c01e00008000000000000000 in ext prec
        fble    lo_nlrg
|
| at this point, the answer is between the largest pos and neg values
|
        movel   USER_FPCR(%a6),%d1      |use user's rounding mode
        andil   #0x30,%d1
        fmovel  %d1,%fpcr
        fmovel  %fp0,L_SCR1(%a6)        |let the 040 perform conversion
        fmovel %fpsr,%d1
        orl     %d1,USER_FPSR(%a6)      |capture inex2/ainex if set
        bra     int_wrt


lo_plrg:
        movel   #0x7fffffff,L_SCR1(%a6) |answer is largest positive int
        fbeq    int_wrt                 |exact answer
        fcmpd   #0x41dfffffffe00000,%fp0
| 41dfffffffe00000 in dbl prec = 401d0000ffffffff00000000 in ext prec
        fbge    int_operr               |set operr
        bra     int_inx                 |set inexact

lo_nlrg:
        movel   #0x80000000,L_SCR1(%a6)
        fbeq    int_wrt                 |exact answer
        fcmpd   #0xc1e0000000100000,%fp0
| c1e0000000100000 in dbl prec = c01e00008000000080000000 in ext prec
        fblt    int_operr               |set operr
        bra     int_inx                 |set inexact

|
| wi is used to handle a word integer source specifier
|

wi:
        moveql  #2,%d0          |set byte count

        btstb   #7,STAG(%a6)    |check for extended denorm
        bne     int_dnrm        |branch if so

        fmovemx ETEMP(%a6),%fp0-%fp0
        fcmps   #0x46fffe00,%fp0
| 46fffe00 in sgl prec = 400d0000fffe000000000000 in ext prec
        fbge    wo_plrg 
        fcmps   #0xc7000000,%fp0
| c7000000 in sgl prec = c00e00008000000000000000 in ext prec
        fble    wo_nlrg

|
| at this point, the answer is between the largest pos and neg values
|
        movel   USER_FPCR(%a6),%d1      |use user's rounding mode
        andil   #0x30,%d1
        fmovel  %d1,%fpcr
        fmovew  %fp0,L_SCR1(%a6)        |let the 040 perform conversion
        fmovel %fpsr,%d1
        orl     %d1,USER_FPSR(%a6)      |capture inex2/ainex if set
        bra     int_wrt

wo_plrg:
        movew   #0x7fff,L_SCR1(%a6)     |answer is largest positive int
        fbeq    int_wrt                 |exact answer
        fcmps   #0x46ffff00,%fp0
| 46ffff00 in sgl prec = 400d0000ffff000000000000 in ext prec
        fbge    int_operr               |set operr
        bra     int_inx                 |set inexact

wo_nlrg:
        movew   #0x8000,L_SCR1(%a6)
        fbeq    int_wrt                 |exact answer
        fcmps   #0xc7000080,%fp0
| c7000080 in sgl prec = c00e00008000800000000000 in ext prec
        fblt    int_operr               |set operr
        bra     int_inx                 |set inexact

|
| bi is used to handle a byte integer source specifier
|

bi:
        moveql  #1,%d0          |set byte count

        btstb   #7,STAG(%a6)    |check for extended denorm
        bne     int_dnrm        |branch if so

        fmovemx ETEMP(%a6),%fp0-%fp0
        fcmps   #0x42fe0000,%fp0
| 42fe0000 in sgl prec = 40050000fe00000000000000 in ext prec
        fbge    by_plrg 
        fcmps   #0xc3000000,%fp0
| c3000000 in sgl prec = c00600008000000000000000 in ext prec
        fble    by_nlrg

|
| at this point, the answer is between the largest pos and neg values
|
        movel   USER_FPCR(%a6),%d1      |use user's rounding mode
        andil   #0x30,%d1
        fmovel  %d1,%fpcr
        fmoveb  %fp0,L_SCR1(%a6)        |let the 040 perform conversion
        fmovel %fpsr,%d1
        orl     %d1,USER_FPSR(%a6)      |capture inex2/ainex if set
        bra     int_wrt

by_plrg:
        moveb   #0x7f,L_SCR1(%a6)               |answer is largest positive int
        fbeq    int_wrt                 |exact answer
        fcmps   #0x42ff0000,%fp0
| 42ff0000 in sgl prec = 40050000ff00000000000000 in ext prec
        fbge    int_operr               |set operr
        bra     int_inx                 |set inexact

by_nlrg:
        moveb   #0x80,L_SCR1(%a6)
        fbeq    int_wrt                 |exact answer
        fcmps   #0xc3008000,%fp0
| c3008000 in sgl prec = c00600008080000000000000 in ext prec
        fblt    int_operr               |set operr
        bra     int_inx                 |set inexact

|
| Common integer routines
|
| int_drnrm---account for possible nonzero result for round up with positive
| operand and round down for negative answer.  In the first case (result = 1)
| byte-width (store in d0) of result must be honored.  In the second case,
| -1 in L_SCR1(a6) will cover all contingencies (FMOVE.B/W/L out).

int_dnrm:
        movel   #0,L_SCR1(%a6)  | initialize result to 0
        bfextu  FPCR_MODE(%a6){#2:#2},%d1       | d1 is the rounding mode
        cmpb    #2,%d1          
        bmis    int_inx         | if RN or RZ, done
        bnes    int_rp          | if RP, continue below
        tstw    ETEMP(%a6)      | RM: store -1 in L_SCR1 if src is negative
        bpls    int_inx         | otherwise result is 0
        movel   #-1,L_SCR1(%a6)
        bras    int_inx
int_rp:
        tstw    ETEMP(%a6)      | RP: store +1 of proper width in L_SCR1 if
|                               ; source is greater than 0
        bmis    int_inx         | otherwise, result is 0
        lea     L_SCR1(%a6),%a1 | a1 is address of L_SCR1
        addal   %d0,%a1         | offset by destination width -1
        subal   #1,%a1          
        bsetb   #0,(%a1)                | set low bit at a1 address
int_inx:
        oril    #inx2a_mask,USER_FPSR(%a6)
        bras    int_wrt
int_operr:
        fmovemx %fp0-%fp0,FPTEMP(%a6)   |FPTEMP must contain the extended
|                               ;precision source that needs to be
|                               ;converted to integer this is required
|                               ;if the operr exception is enabled.
|                               ;set operr/aiop (no inex2 on int ovfl)

        oril    #opaop_mask,USER_FPSR(%a6)
|                               ;fall through to perform int_wrt
int_wrt: 
        movel   EXC_EA(%a6),%a1 |load destination address
        tstl    %a1             |check to see if it is a dest register
        beqs    wrt_dn          |write data register 
        lea     L_SCR1(%a6),%a0 |point to supervisor source address
        bsrl    mem_write
        bra     mvouti_end

wrt_dn:
        movel   %d0,-(%sp)      |d0 currently contains the size to write
        bsrl    get_fline       |get_fline returns Dn in d0
        andiw   #0x7,%d0                |isolate register
        movel   (%sp)+,%d1      |get size
        cmpil   #4,%d1          |most frequent case
        beqs    sz_long
        cmpil   #2,%d1
        bnes    sz_con
        orl     #8,%d0          |add 'word' size to register#
        bras    sz_con
sz_long:
        orl     #0x10,%d0               |add 'long' size to register#
sz_con:
        movel   %d0,%d1         |reg_dest expects size:reg in d1
        bsrl    reg_dest        |load proper data register
        bra     mvouti_end 
xp:
        lea     ETEMP(%a6),%a0
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        btstb   #7,STAG(%a6)    |check for extended denorm
        bne     xdnrm
        clrl    %d0
        bras    do_fp           |do normal case
sgp:
        lea     ETEMP(%a6),%a0
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        btstb   #7,STAG(%a6)    |check for extended denorm
        bne     sp_catas        |branch if so
        movew   LOCAL_EX(%a0),%d0
        lea     sp_bnds,%a1
        cmpw    (%a1),%d0
        blt     sp_under
        cmpw    2(%a1),%d0
        bgt     sp_over
        movel   #1,%d0          |set destination format to single
        bras    do_fp           |do normal case
dp:
        lea     ETEMP(%a6),%a0
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)

        btstb   #7,STAG(%a6)    |check for extended denorm
        bne     dp_catas        |branch if so

        movew   LOCAL_EX(%a0),%d0
        lea     dp_bnds,%a1

        cmpw    (%a1),%d0
        blt     dp_under
        cmpw    2(%a1),%d0
        bgt     dp_over
        
        movel   #2,%d0          |set destination format to double
|                               ;fall through to do_fp
|
do_fp:
        bfextu  FPCR_MODE(%a6){#2:#2},%d1       |rnd mode in d1
        swap    %d0                     |rnd prec in upper word
        addl    %d0,%d1                 |d1 has PREC/MODE info
        
        clrl    %d0                     |clear g,r,s 

        bsrl    round                   |round 

        movel   %a0,%a1
        movel   EXC_EA(%a6),%a0

        bfextu  CMDREG1B(%a6){#3:#3},%d1        |extract destination format
|                                       ;at this point only the dest
|                                       ;formats sgl, dbl, ext are
|                                       ;possible
        cmpb    #2,%d1
        bgts    ddbl                    |double=5, extended=2, single=1
        bnes    dsgl
|                                       ;fall through to dext
dext:
        bsrl    dest_ext
        bra     mvout_end
dsgl:
        bsrl    dest_sgl
        bra     mvout_end
ddbl:
        bsrl    dest_dbl
        bra     mvout_end

|
| Handle possible denorm or catastrophic underflow cases here
|
xdnrm:
        bsr     set_xop         |initialize WBTEMP
        bsetb   #wbtemp15_bit,WB_BYTE(%a6) |set wbtemp15

        movel   %a0,%a1
        movel   EXC_EA(%a6),%a0 |a0 has the destination pointer
        bsrl    dest_ext        |store to memory
        bsetb   #unfl_bit,FPSR_EXCEPT(%a6)
        bra     mvout_end
        
sp_under:
        bsetb   #etemp15_bit,STAG(%a6)

        cmpw    4(%a1),%d0
        blts    sp_catas        |catastrophic underflow case    

        movel   #1,%d0          |load in round precision
        movel   #sgl_thresh,%d1 |load in single denorm threshold
        bsrl    dpspdnrm        |expects d1 to have the proper
|                               ;denorm threshold
        bsrl    dest_sgl        |stores value to destination
        bsetb   #unfl_bit,FPSR_EXCEPT(%a6)
        bra     mvout_end       |exit

dp_under:
        bsetb   #etemp15_bit,STAG(%a6)

        cmpw    4(%a1),%d0
        blts    dp_catas        |catastrophic underflow case
                
        movel   #dbl_thresh,%d1 |load in double precision threshold
        movel   #2,%d0          
        bsrl    dpspdnrm        |expects d1 to have proper
|                               ;denorm threshold
|                               ;expects d0 to have round precision
        bsrl    dest_dbl        |store value to destination
        bsetb   #unfl_bit,FPSR_EXCEPT(%a6)
        bra     mvout_end       |exit

|
| Handle catastrophic underflow cases here
|
sp_catas:
| Temp fix for z bit set in unf_sub
        movel   USER_FPSR(%a6),-(%a7)

        movel   #1,%d0          |set round precision to sgl

        bsrl    unf_sub         |a0 points to result

        movel   (%a7)+,USER_FPSR(%a6)

        movel   #1,%d0
        subw    %d0,LOCAL_EX(%a0) |account for difference between
|                               ;denorm/norm bias

        movel   %a0,%a1         |a1 has the operand input
        movel   EXC_EA(%a6),%a0 |a0 has the destination pointer
        
        bsrl    dest_sgl        |store the result
        oril    #unfinx_mask,USER_FPSR(%a6)
        bra     mvout_end
        
dp_catas:
| Temp fix for z bit set in unf_sub
        movel   USER_FPSR(%a6),-(%a7)

        movel   #2,%d0          |set round precision to dbl
        bsrl    unf_sub         |a0 points to result

        movel   (%a7)+,USER_FPSR(%a6)

        movel   #1,%d0
        subw    %d0,LOCAL_EX(%a0) |account for difference between 
|                               ;denorm/norm bias

        movel   %a0,%a1         |a1 has the operand input
        movel   EXC_EA(%a6),%a0 |a0 has the destination pointer
        
        bsrl    dest_dbl        |store the result
        oril    #unfinx_mask,USER_FPSR(%a6)
        bra     mvout_end

|
| Handle catastrophic overflow cases here
|
sp_over:
| Temp fix for z bit set in unf_sub
        movel   USER_FPSR(%a6),-(%a7)

        movel   #1,%d0
        leal    FP_SCR1(%a6),%a0        |use FP_SCR1 for creating result
        movel   ETEMP_EX(%a6),(%a0)
        movel   ETEMP_HI(%a6),4(%a0)
        movel   ETEMP_LO(%a6),8(%a0)
        bsrl    ovf_res

        movel   (%a7)+,USER_FPSR(%a6)

        movel   %a0,%a1
        movel   EXC_EA(%a6),%a0
        bsrl    dest_sgl
        orl     #ovfinx_mask,USER_FPSR(%a6)
        bra     mvout_end

dp_over:
| Temp fix for z bit set in ovf_res
        movel   USER_FPSR(%a6),-(%a7)

        movel   #2,%d0
        leal    FP_SCR1(%a6),%a0        |use FP_SCR1 for creating result
        movel   ETEMP_EX(%a6),(%a0)
        movel   ETEMP_HI(%a6),4(%a0)
        movel   ETEMP_LO(%a6),8(%a0)
        bsrl    ovf_res

        movel   (%a7)+,USER_FPSR(%a6)

        movel   %a0,%a1
        movel   EXC_EA(%a6),%a0
        bsrl    dest_dbl
        orl     #ovfinx_mask,USER_FPSR(%a6)
        bra     mvout_end

|
|       DPSPDNRM
|
| This subroutine takes an extended normalized number and denormalizes
| it to the given round precision. This subroutine also decrements
| the input operand's exponent by 1 to account for the fact that
| dest_sgl or dest_dbl expects a normalized number's bias.
|
| Input: a0  points to a normalized number in internal extended format
|        d0  is the round precision (=1 for sgl; =2 for dbl)
|        d1  is the single precision or double precision
|            denorm threshold
|
| Output: (In the format for dest_sgl or dest_dbl)
|        a0   points to the destination
|        a1   points to the operand
|
| Exceptions: Reports inexact 2 exception by setting USER_FPSR bits
|
dpspdnrm:
        movel   %d0,-(%a7)      |save round precision
        clrl    %d0             |clear initial g,r,s
        bsrl    dnrm_lp         |careful with d0, it's needed by round

        bfextu  FPCR_MODE(%a6){#2:#2},%d1 |get rounding mode
        swap    %d1
        movew   2(%a7),%d1      |set rounding precision 
        swap    %d1             |at this point d1 has PREC/MODE info
        bsrl    round           |round result, sets the inex bit in
|                               ;USER_FPSR if needed

        movew   #1,%d0
        subw    %d0,LOCAL_EX(%a0) |account for difference in denorm
|                               ;vs norm bias

        movel   %a0,%a1         |a1 has the operand input
        movel   EXC_EA(%a6),%a0 |a0 has the destination pointer
        addw    #4,%a7          |pop stack
        rts
|
| SET_XOP initialized WBTEMP with the value pointed to by a0
| input: a0 points to input operand in the internal extended format
|
set_xop:
        movel   LOCAL_EX(%a0),WBTEMP_EX(%a6)
        movel   LOCAL_HI(%a0),WBTEMP_HI(%a6)
        movel   LOCAL_LO(%a0),WBTEMP_LO(%a6)
        bfclr   WBTEMP_SGN(%a6){#0:#8}
        beqs    sxop
        bsetb   #sign_bit,WBTEMP_EX(%a6)
sxop:
        bfclr   STAG(%a6){#5:#4}        |clear wbtm66,wbtm1,wbtm0,sbit
        rts
|
|       P_MOVE
|
p_movet:
        .long   p_move
        .long   p_movez
        .long   p_movei
        .long   p_moven
        .long   p_move
p_regd:
        .long   p_dyd0
        .long   p_dyd1
        .long   p_dyd2
        .long   p_dyd3
        .long   p_dyd4
        .long   p_dyd5
        .long   p_dyd6
        .long   p_dyd7

pack_out:
        leal    p_movet,%a0     |load jmp table address
        movew   STAG(%a6),%d0   |get source tag
        bfextu  %d0{#16:#3},%d0 |isolate source bits
        movel   (%a0,%d0.w*4),%a0       |load a0 with routine label for tag
        jmp     (%a0)           |go to the routine

p_write:
        movel   #0x0c,%d0       |get byte count
        movel   EXC_EA(%a6),%a1 |get the destination address
        bsr     mem_write       |write the user's destination
        moveb   #0,CU_SAVEPC(%a6) |set the cu save pc to all 0's

|
| Also note that the dtag must be set to norm here - this is because 
| the 040 uses the dtag to execute the correct microcode.
|
        bfclr    DTAG(%a6){#0:#3}  |set dtag to norm

        rts

| Notes on handling of special case (zero, inf, and nan) inputs:
|       1. Operr is not signalled if the k-factor is greater than 18.
|       2. Per the manual, status bits are not set.
|

p_move:
        movew   CMDREG1B(%a6),%d0
        btstl   #kfact_bit,%d0  |test for dynamic k-factor
        beqs    statick         |if clear, k-factor is static
dynamick:
        bfextu  %d0{#25:#3},%d0 |isolate register for dynamic k-factor
        lea     p_regd,%a0
        movel   %a0@(%d0:l:4),%a0
        jmp     (%a0)
statick:
        andiw   #0x007f,%d0     |get k-factor
        bfexts  %d0{#25:#7},%d0 |sign extend d0 for bindec
        leal    ETEMP(%a6),%a0  |a0 will point to the packed decimal
        bsrl    bindec          |perform the convert; data at a6
        leal    FP_SCR1(%a6),%a0        |load a0 with result address
        bral    p_write
p_movez:
        leal    ETEMP(%a6),%a0  |a0 will point to the packed decimal
        clrw    2(%a0)          |clear lower word of exp
        clrl    4(%a0)          |load second lword of ZERO
        clrl    8(%a0)          |load third lword of ZERO
        bra     p_write         |go write results
p_movei:
        fmovel  #0,%FPSR                |clear aiop
        leal    ETEMP(%a6),%a0  |a0 will point to the packed decimal
        clrw    2(%a0)          |clear lower word of exp
        bra     p_write         |go write the result
p_moven:
        leal    ETEMP(%a6),%a0  |a0 will point to the packed decimal
        clrw    2(%a0)          |clear lower word of exp
        bra     p_write         |go write the result

|
| Routines to read the dynamic k-factor from Dn.
|
p_dyd0:
        movel   USER_D0(%a6),%d0
        bras    statick
p_dyd1:
        movel   USER_D1(%a6),%d0
        bras    statick
p_dyd2:
        movel   %d2,%d0
        bras    statick
p_dyd3:
        movel   %d3,%d0
        bras    statick
p_dyd4:
        movel   %d4,%d0
        bras    statick
p_dyd5:
        movel   %d5,%d0
        bras    statick
p_dyd6:
        movel   %d6,%d0
        bra     statick
p_dyd7:
        movel   %d7,%d0
        bra     statick

        |end