Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

/*
 *  This file contains the power_save function for 6xx & 7xxx CPUs
 *  rewritten in assembler
 *
 *  Warning ! This code assumes that if your machine has a 750fx
 *  it will have PLL 1 set to low speed mode (used during NAP/DOZE).
 *  if this is not the case some additional changes will have to
 *  be done to check a runtime var (a bit like powersave-nap)
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 */

#include <linux/threads.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>

        .text

/*
 * Init idle, called at early CPU setup time from head.S for each CPU
 * Make sure no rest of NAP mode remains in HID0, save default
 * values for some CPU specific registers. Called with r24
 * containing CPU number and r3 reloc offset
 */
_GLOBAL(init_idle_6xx)
BEGIN_FTR_SECTION
        mfspr   r4,SPRN_HID0
        rlwinm  r4,r4,0,10,8    /* Clear NAP */
        mtspr   SPRN_HID0, r4
        b       1f
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
        blr
1:
        slwi    r5,r24,2
        add     r5,r5,r3
BEGIN_FTR_SECTION
        mfspr   r4,SPRN_MSSCR0
        addis   r6,r5, nap_save_msscr0@ha
        stw     r4,nap_save_msscr0@l(r6)
END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
BEGIN_FTR_SECTION
        mfspr   r4,SPRN_HID1
        addis   r6,r5,nap_save_hid1@ha
        stw     r4,nap_save_hid1@l(r6)
END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
        blr

/*
 * Here is the power_save_6xx function. This could eventually be
 * split into several functions & changing the function pointer
 * depending on the various features.
 */
_GLOBAL(ppc6xx_idle)
        /* Check if we can nap or doze, put HID0 mask in r3
         */
        lis     r3, 0
BEGIN_FTR_SECTION
        lis     r3,HID0_DOZE@h
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
BEGIN_FTR_SECTION
        /* We must dynamically check for the NAP feature as it
         * can be cleared by CPU init after the fixups are done
         */
        lis     r4,cur_cpu_spec@ha
        lwz     r4,cur_cpu_spec@l(r4)
        lwz     r4,CPU_SPEC_FEATURES(r4)
        andi.   r0,r4,CPU_FTR_CAN_NAP
        beq     1f
        /* Now check if user or arch enabled NAP mode */
        lis     r4,powersave_nap@ha
        lwz     r4,powersave_nap@l(r4)
        cmpwi   0,r4,0
        beq     1f
        lis     r3,HID0_NAP@h
1:      
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
        cmpwi   0,r3,0
        beqlr

        /* Some pre-nap cleanups needed on some CPUs */
        andis.  r0,r3,HID0_NAP@h
        beq     2f
BEGIN_FTR_SECTION
        /* Disable L2 prefetch on some 745x and try to ensure
         * L2 prefetch engines are idle. As explained by errata
         * text, we can't be sure they are, we just hope very hard
         * that well be enough (sic !). At least I noticed Apple
         * doesn't even bother doing the dcbf's here...
         */
        mfspr   r4,SPRN_MSSCR0
        rlwinm  r4,r4,0,0,29
        sync
        mtspr   SPRN_MSSCR0,r4
        sync
        isync
        lis     r4,KERNELBASE@h
        dcbf    0,r4
        dcbf    0,r4
        dcbf    0,r4
        dcbf    0,r4
END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
2:
BEGIN_FTR_SECTION
        /* Go to low speed mode on some 750FX */
        lis     r4,powersave_lowspeed@ha
        lwz     r4,powersave_lowspeed@l(r4)
        cmpwi   0,r4,0
        beq     1f
        mfspr   r4,SPRN_HID1
        oris    r4,r4,0x0001
        mtspr   SPRN_HID1,r4
1:      
END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)

        /* Go to NAP or DOZE now */     
        mfspr   r4,SPRN_HID0
        lis     r5,(HID0_NAP|HID0_SLEEP)@h
BEGIN_FTR_SECTION
        oris    r5,r5,HID0_DOZE@h
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
        andc    r4,r4,r5
        or      r4,r4,r3
BEGIN_FTR_SECTION
        oris    r4,r4,HID0_DPM@h        /* that should be done once for all  */
END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
        mtspr   SPRN_HID0,r4
BEGIN_FTR_SECTION
        DSSALL
        sync
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
        rlwinm  r9,r1,0,0,31-THREAD_SHIFT       /* current thread_info */
        lwz     r8,TI_LOCAL_FLAGS(r9)   /* set napping bit */
        ori     r8,r8,_TLF_NAPPING      /* so when we take an exception */
        stw     r8,TI_LOCAL_FLAGS(r9)   /* it will return to our caller */
        mfmsr   r7
        ori     r7,r7,MSR_EE
        oris    r7,r7,MSR_POW@h
1:      sync
        mtmsr   r7
        isync
        b       1b

/*
 * Return from NAP/DOZE mode, restore some CPU specific registers,
 * we are called with DR/IR still off and r2 containing physical
 * address of current.  R11 points to the exception frame (physical
 * address).  We have to preserve r10.
 */
_GLOBAL(power_save_6xx_restore)
        lwz     r9,_LINK(r11)           /* interrupted in ppc6xx_idle: */
        stw     r9,_NIP(r11)            /* make it do a blr */

#ifdef CONFIG_SMP
        mfspr   r12,SPRN_SPRG3
        lwz     r11,TI_CPU(r12)         /* get cpu number * 4 */
        slwi    r11,r11,2
#else
        li      r11,0
#endif
        /* Todo make sure all these are in the same page
         * and load r11 (@ha part + CPU offset) only once
         */
BEGIN_FTR_SECTION
        mfspr   r9,SPRN_HID0
        andis.  r9,r9,HID0_NAP@h
        beq     1f
        addis   r9,r11,(nap_save_msscr0-KERNELBASE)@ha
        lwz     r9,nap_save_msscr0@l(r9)
        mtspr   SPRN_MSSCR0, r9
        sync
        isync
1:
END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
BEGIN_FTR_SECTION
        addis   r9,r11,(nap_save_hid1-KERNELBASE)@ha
        lwz     r9,nap_save_hid1@l(r9)
        mtspr   SPRN_HID1, r9
END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
        b       transfer_to_handler_cont

        .data

_GLOBAL(nap_save_msscr0)
        .space  4*NR_CPUS

_GLOBAL(nap_save_hid1)
        .space  4*NR_CPUS

_GLOBAL(powersave_lowspeed)
        .long   0