URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.7/] [tools/] [fx2/] [sys/] [README.txt] - Rev 27
Go to most recent revision | Compare with Previous | Blame | View Log
# $Id: README.txt 604 2014-11-16 22:33:09Z mueller $
This directory contains udev rules which ensure that the Cypress FX2 on
- Digilent Nexys2
- Digilent Nexys3
- Digilent Atlys
is read/write accessible for user land processes, either in
- original power on state (thus Digilent VID/PID)
- after custom firmware is loaded (thus VOTI VID/PID)
!! The rules assume that eligible user accounts are in group plugdev.
!! Check with the 'groups' command whether your account is in group plugdev,
!! in not, add this group to your accounts groups list.
To setup udev rules do
sudo cp -a 99-retro-usb-permissions.rules /etc/udev/rules.d/
sudo chown root:root /etc/udev/rules.d/99-retro-usb-permissions.rules
dir /etc/udev/rules.d/
sudo udevadm control --reload-rules
to verify whether usb device was really put into group 'plugdev'
lsusb
--> look for bus/dev of interest
find /dev/bus/usb -type c | sort| xargs ls -l
--> check whether bus/dev of interest is in group plugdev
Go to most recent revision | Compare with Previous | Blame | View Log