OpenCores
URL https://opencores.org/ocsvn/wb4pb/wb4pb/trunk

Subversion Repositories wb4pb

[/] [wb4pb/] [trunk/] [asm/] [pbwbgpio.psm] - Rev 16

Go to most recent revision | Compare with Previous | Blame | View Log

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; This sourcecode is released under BSD license.
;; Please see http://www.opensource.org/licenses/bsd-license.php for details!
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Copyright (c) 2010, Stefan Fischer <Ste.Fis@OpenCores.org>
;; All rights reserved.
;;
;; Redistribution and use in source and binary forms, with or without 
;; modification, are permitted provided that the following conditions are met:
;;
;;  * Redistributions of source code must retain the above copyright notice, 
;;    this list of conditions and the following disclaimer.
;;  * Redistributions in binary form must reproduce the above copyright notice,
;;    this list of conditions and the following disclaimer in the documentation
;;    and/or other materials provided with the distribution. 
;;  * Neither the name of the author nor the names of his contributors may be 
;;    used to endorse or promote products derived from this software without 
;;    specific prior written permission.
;;
;; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
;; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
;; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
;; ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 
;; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
;; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
;; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
;; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
;; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
;; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
;; POSSIBILITY OF SUCH DAMAGE.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; filename: pbwbgpio.psm
;; description: gpio example, demonstrating access to wishbone peripherals
;; todo4user: modify main program and gpio_init code as needed
;; version: 0.0.0
;; changelog: - 0.0.0, initial release
;;            - ...
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; IMPORTANT NOTICE!
; be carefull, if using interrupts. wishbone cycles must be atomar, as any 
; other processor local bus cycles are normally be. interrupting wishbone 
; access may cause a crash of external wishbone master fsm, especially, if 
; program flow through isr leads to another wishbone cycle!


NAMEREG sF , wb_addr
NAMEREG sE , wb_data ; also used as tmp-reg for status polling

CONSTANT WB_ACK_FLAG , 01

CONSTANT GPIO_IO_ADDR , 00
CONSTANT GPIO_OE_ADDR , 01


ADDRESS 000

; main entry point
DISABLE INTERRUPT

CALL gpio_init

; mirroring upper nibble gpio inputs 
; to lower nibble gpio outputs
LOAD wb_addr , GPIO_IO_ADDR
mainloop:
  CALL wb_rd
  NAMEREG s0 , i
  LOAD i , 04
  for_i_in_4_downto_1_loop: ; bitshifting (wb_data>>4)
    SR0 wb_data
    SUB i , 01
    JUMP NZ , for_i_in_4_downto_1_loop
  CALL wb_wr
  JUMP mainloop

gpio_init:
  ; setting all outputs low
  LOAD wb_addr , GPIO_IO_ADDR
  LOAD wb_data , 00
  CALL wb_wr
  ; configuring lower gpio nibble as output
  LOAD wb_addr , GPIO_OE_ADDR
  LOAD wb_data , 0F
  CALL wb_wr
RETURN  

; subroutines wb_wr and wb_rd are working together with external wbm_picoblaze
; wishbone adapter module and therefore should not be modified. wb_wait_on_ack 
; is a supporting subroutine, which should not be called directly
; 
; transfer principle wishbone write:
; 1. OUTPUT cycle to set up wishbone address, data and control signals from 
;    PORT_ID, OUT_PORT and WRITE_STROBE
; 2. INPUT cycle(s) to poll wishbone peripheral acknowledgement using IN_PORT
; => at least one OUTPUT and one INPUT cycle for a write
;
; transfer principle wishbone read:
; 1. INPUT cycle to set up wishbone address and control signals from PORT_ID
;    and READ_STROBE
; 2. INPUT cycle(s) to poll wishbone peripheral acknowledgement using IN_PORT
; 3. the very next INPUT cycle after acknowledgement contains valid wishbone 
;    data from IN_PORT
; => at least three INPUT cycles for a read
;
; calling examples:
;
; wishbone write code =>
;
; LOAD wb_addr , <user address> ; setting up address
; LOAD wb_data , <user data> ; setting up data
; CALL wb_wr ; starting wishbone write cycle
; <next user instruction> ; wishbone cycle finished
;
; wishbone read code =>
;
; LOAD wb_addr , <user address> ; setting up address
; CALL wb_rd ; starting wishbone read cycle
; <next user instruction> ; wishbone cycle finished, wb_data is updated now

; wishbone write access
wb_wr:
  OUTPUT wb_data , (wb_addr)
  CALL wb_wait_on_ack
RETURN

; wishbone read access
wb_rd:
  CALL wb_wait_on_ack
  INPUT wb_data , (wb_addr)
RETURN 

; waiting on wishbone cycle to complete
wb_wait_on_ack:
  INPUT wb_data , (wb_addr)
  TEST wb_data , WB_ACK_FLAG
  JUMP Z , wb_wait_on_ack
RETURN

; interrupt handling template, if needed
isr:
RETURNI DISABLE
ADDRESS 3FF
JUMP isr

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.