Subversion Repositories wb4pb

--------------------------------------------------------------------------------
-- This sourcecode is released under BSD license.
-- Please see http://www.opensource.org/licenses/bsd-license.php for details!
--------------------------------------------------------------------------------
--
-- Copyright (c) 2010, Stefan Fischer <Ste.Fis@OpenCores.org>
-- All rights reserved.
--
-- Redistribution and use in source and binary forms, with or without 
-- modification, are permitted provided that the following conditions are met:
--
--  * Redistributions of source code must retain the above copyright notice, 
--    this list of conditions and the following disclaimer.
--  * Redistributions in binary form must reproduce the above copyright notice,
--    this list of conditions and the following disclaimer in the documentation
--    and/or other materials provided with the distribution. 
--  * Neither the name of the author nor the names of his contributors may be 
--    used to endorse or promote products derived from this software without 
--    specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
-- POSSIBILITY OF SUCH DAMAGE.
--
--------------------------------------------------------------------------------
-- filename: picoblaze_wb_gpio.vhd
-- description: synthesizable PicoBlaze (TM) general purpose i/o example using 
--              wishbone
-- todo4user: add other modules as needed
-- version: 0.0.0
-- changelog: - 0.0.0, initial release
--            - ...
--------------------------------------------------------------------------------
 
 
library ieee;
use ieee.std_logic_1164.all;
 
 
entity picoblaze_wb_gpio is
  port
  (
    p_rst_n_i : in std_logic;
    p_clk_i : in std_logic;
 
    p_gpio_io : inout std_logic_vector(7 downto 0)
  );
end picoblaze_wb_gpio;
 
 
architecture rtl of picoblaze_wb_gpio is
 
  component kcpsm3 is
    port 
    (
      address : out std_logic_vector(9 downto 0);
      instruction : in std_logic_vector(17 downto 0);
      port_id : out std_logic_vector(7 downto 0);
      write_strobe : out std_logic;
      out_port : out std_logic_vector(7 downto 0);
      read_strobe : out std_logic;
      in_port : in std_logic_vector(7 downto 0);
      interrupt : in std_logic;
      interrupt_ack : out std_logic;
      reset : in std_logic;
      clk : in std_logic
    );
  end component;
 
  component pbwbgpio is
    port 
    (      
      address : in std_logic_vector(9 downto 0);
      instruction : out std_logic_vector(17 downto 0);
      clk : in std_logic
    );
  end component;
 
  component wbm_picoblaze is
    port
    (
      rst : in std_logic;
      clk : in std_logic;
 
      wbm_cyc_o : out std_logic;
      wbm_stb_o : out std_logic;
      wbm_we_o : out std_logic;
      wbm_adr_o : out std_logic_vector(7 downto 0);
      wbm_dat_m2s_o : out std_logic_vector(7 downto 0);
      wbm_dat_s2m_i : in std_logic_vector(7 downto 0);
      wbm_ack_i : in std_logic;
 
      pb_port_id_i : in std_logic_vector(7 downto 0);
      pb_write_strobe_i : in std_logic;
      pb_out_port_i : in std_logic_vector(7 downto 0);
      pb_read_strobe_i : in std_logic;
      pb_in_port_o : out std_logic_vector(7 downto 0)
    );
  end component;
 
  component wbs_gpio is
    port
    (
      rst : in std_logic;
      clk : in std_logic;
 
      wbs_cyc_i : in std_logic;
      wbs_stb_i : in std_logic;
      wbs_we_i : in std_logic;
      wbs_adr_i : in std_logic_vector(7 downto 0);
      wbs_dat_m2s_i : in std_logic_vector(7 downto 0);
      wbs_dat_s2m_o : out std_logic_vector(7 downto 0);
      wbs_ack_o : out std_logic;
 
      gpio_in_i : in std_logic_vector(7 downto 0);
      gpio_out_o : out std_logic_vector(7 downto 0);
      gpio_oe_o : out std_logic_vector(7 downto 0)
    );
  end component;
 
  signal rst : std_logic := '1';
  signal clk : std_logic := '1';
 
  signal wb_cyc : std_logic := '0';
  signal wb_stb : std_logic := '0';
  signal wb_we : std_logic := '0';
  signal wb_adr : std_logic_vector(7 downto 0) := (others => '0');
  signal wb_dat_m2s : std_logic_vector(7 downto 0) := (others => '0');
  signal wb_dat_s2m : std_logic_vector(7 downto 0) := (others => '0');
  signal wb_ack : std_logic := '0';
 
  signal pb_write_strobe : std_logic := '0';
  signal pb_read_strobe : std_logic := '0';
  signal pb_port_id : std_logic_vector(7 downto 0) := (others => '0');
  signal pb_in_port : std_logic_vector(7 downto 0) := (others => '0');
  signal pb_out_port : std_logic_vector(7 downto 0) := (others => '0');
 
  signal instruction : std_logic_vector(17 downto 0) := (others => '0');
  signal address : std_logic_vector(9 downto 0) := (others => '0');
 
  signal interrupt : std_logic := '0';
  signal interrupt_ack : std_logic := '0';
 
  signal gpio_in : std_logic_vector(7 downto 0) := (others => '0');
  signal gpio_out : std_logic_vector(7 downto 0) := (others => '0');
  signal gpio_oe : std_logic_vector(7 downto 0) := (others => '0');
 
  constant IS_INPUT : std_logic := '0';
  constant IS_OUTPUT : std_logic := not IS_INPUT;
 
begin
 
  -- reset synchronisation
  process(clk)
  begin
    if rising_edge(clk) then
      rst <= not p_rst_n_i;
    end if;
  end process;
  clk <= p_clk_i;
 
  -- module instances
  -------------------
 
  inst_kcpsm3 : kcpsm3
    port map
    (
      address => address,
      instruction => instruction,
      port_id => pb_port_id,
      write_strobe => pb_write_strobe,
      out_port => pb_out_port,
      read_strobe => pb_read_strobe,
      in_port => pb_in_port,
      interrupt => interrupt,
      interrupt_ack => interrupt_ack,
      reset => rst,
      clk => clk
    );
 
  inst_pbwbgpio : pbwbgpio
    port map
    (      
      address => address,
      instruction => instruction,
      clk => clk
    );
 
  inst_wbm_picoblaze : wbm_picoblaze
    port map
    (
      rst => rst,
      clk => clk,
 
      wbm_cyc_o => wb_cyc,
      wbm_stb_o => wb_stb,
      wbm_we_o => wb_we,
      wbm_adr_o => wb_adr,
      wbm_dat_m2s_o => wb_dat_m2s,
      wbm_dat_s2m_i => wb_dat_s2m,
      wbm_ack_i => wb_ack,
 
      pb_port_id_i => pb_port_id,
      pb_write_strobe_i => pb_write_strobe,
      pb_out_port_i => pb_out_port,
      pb_read_strobe_i => pb_read_strobe,
      pb_in_port_o => pb_in_port
    );
 
  inst_wbs_gpio : wbs_gpio
    port map
    (
      rst => rst,
      clk => clk,
 
      wbs_cyc_i => wb_cyc,
      wbs_stb_i => wb_stb,
      wbs_we_i => wb_we,
      wbs_adr_i => wb_adr,
      wbs_dat_m2s_i => wb_dat_m2s,
      wbs_dat_s2m_o => wb_dat_s2m,
      wbs_ack_o => wb_ack,
 
      gpio_in_i => gpio_in,
      gpio_out_o => gpio_out,
      gpio_oe_o => gpio_oe
    );
 
  -- i/o buffer generation
  gpio_in <= p_gpio_io;
  process(gpio_oe, gpio_out)
  begin
    for i in 0 to 7 loop
      if gpio_oe(i) = IS_OUTPUT then
        p_gpio_io(i) <= gpio_out(i);
      else
        p_gpio_io(i) <= 'Z';
      end if;
    end loop;
  end process;
 
end rtl;