URL
https://opencores.org/ocsvn/wf3d/wf3d/trunk
Subversion Repositories wf3d
[/] [wf3d/] [trunk/] [rtl/] [core/] [fm_3d_frcp.v] - Rev 2
Go to most recent revision | Compare with Previous | Blame | View Log
//======================================================================= // Project Monophony // Wire-Frame 3D Graphics Accelerator IP Core // // File: // fm_3d_frcp.v // // Abstract: // floating point 1/x, latency = 2 // if i_a = 0, o_c = 0 // // Author: // Kenji Ishimaru (kenji.ishimaru@prtissimo.com) // //====================================================================== // // Copyright (c) 2015, Kenji Ishimaru // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are met: // // -Redistributions of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // -Redistributions in binary form must reproduce the above copyright notice, // this list of conditions and the following disclaimer in the documentation // and/or other materials provided with the distribution. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, // THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR // PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR // CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, // EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, // PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; // OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, // WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR // OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, // EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // // Revision History module fm_3d_frcp ( clk_core, i_en, i_a, o_c ); //////////////////////////// // I/O definition //////////////////////////// input clk_core; input i_en; input [21:0] i_a; // input A output [21:0] o_c; // result /////////////////////////////////////////// // register definition /////////////////////////////////////////// reg [21:0] r_c; // result reg r_a_sign; reg [4:0] r_ce_tmp; reg [7:0] r_a_frac_l; /////////////////////////////////////////// // wire /////////////////////////////////////////// wire w_a_sign; wire [4:0] w_a_exp; wire [15:0] w_a_fraction; wire [4:0] w_2bias; wire [4:0] w_ce_tmp; wire [15:0] w_cf_tmp; wire [31:0] w_rom_out; wire [15:0] w_rom_base; wire [15:0] w_rom_diff; wire [6:0] w_rom_address; wire [7:0] w_a_frac_l; //wire [31:0] w_rom_correct; wire [23:0] w_rom_correct; wire [21:0] w_c; wire w_zero_flag; /////////////////////////////////////////// // assign /////////////////////////////////////////// assign w_a_sign = i_a[21]; assign w_a_exp = i_a[20:16]; assign w_a_fraction = i_a[15:0]; assign w_2bias = 5'h1e; // x2 assign w_ce_tmp = w_2bias - w_a_exp; assign w_rom_address = w_a_fraction[14:8]; assign w_a_frac_l = w_a_fraction[7:0]; /* // original implementation assign w_rom_base = w_rom_out[31:16]; // 1.15 assign w_rom_diff = w_rom_out[15:0]; // 0.16 assign w_rom_correct = w_rom_diff * {r_a_frac_l,8'b0}; assign w_cf_tmp = w_rom_base - {1'b0,w_rom_correct[31:17]}; */ // timing improvement assign w_rom_base = w_rom_out[31:16]; // 1.15 assign w_rom_diff = w_rom_out[15:0]; // 0.16 assign w_rom_correct = w_rom_diff * r_a_frac_l; assign w_cf_tmp = w_rom_base - {1'b0,w_rom_correct[23:9]}; assign w_zero_flag = (w_a_exp == 5'h0); // output port assign o_c = r_c; /////////////////////////////////////////// // always statement /////////////////////////////////////////// always @(posedge clk_core) begin if (i_en) begin r_a_sign <= w_a_sign; r_ce_tmp <= w_ce_tmp; r_a_frac_l <= w_a_frac_l; end end always @(posedge clk_core) begin if (i_en) begin r_c <= (w_zero_flag) ? 16'h0 : w_c; end end /////////////////////////////////////////// // module instance /////////////////////////////////////////// // table rom fm_3d_frcp_rom frcp_rom ( .clk_core(clk_core), .i_a(w_rom_address), .o_c(w_rom_out) ); // normalize fm_3d_norm norm ( .i_s(r_a_sign), .i_e(r_ce_tmp), .i_f({1'b0,w_cf_tmp[15:0]}), .o_b(w_c) ); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log