Subversion Repositories xmatchpro

--This library is free software; you can redistribute it and/or
--modify it under the terms of the GNU Lesser General Public
--License as published by the Free Software Foundation; either
--version 2.1 of the License, or (at your option) any later version.
 
--This library is distributed in the hope that it will be useful,
--but WITHOUT ANY WARRANTY; without even the implied warranty of
--MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
--Lesser General Public License for more details.
 
--You should have received a copy of the GNU Lesser General Public
--License along with this library; if not, write to the Free Software
--Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 
-- e_mail : j.l.nunez-yanez@byacom.co.uk
 
---------------------------------------------
--  ENTITY       = ASSEMBLER_REGISTER         --
--  version      = 1.0                     --
--  last update  = 3/05/01                 --
--  author       = Jose Nunez              --
---------------------------------------------
 
 
-- FUNCTION
-- The assembler register latches data and length in the assembling unit
 
--  PIN LIST
 
--  RESET = assembling unit active
--  WRITE_IN = 
--  DATA_IN  = data to from the assembler
--  LENGTH_IN
--  DATA_OUT  = output data to the search register
--  LENGTH_OUT
--  WRITE_OUT  = write input to the buffer
--  CLEAR    = asynchronous clear
--  CLK      = master clock
 
library ieee;
use ieee.std_logic_1164.all;
 
entity ASSEMBLER_REGISTER is
port (
	  WRITE_IN : in bit;
	  DATA_IN : in bit_vector(55 downto 0);
	  LENGTH_IN : in bit_vector(2 downto 0);
	  CLK : in bit;
	  CLEAR : in bit;
	  RESET : in bit;
	  ENABLE : in bit;
	  WRITE_OUT : out bit;
	  DATA_OUT : out bit_vector(55 downto 0);
	  LENGTH_OUT: out bit_vector(2 downto 0)
	 );
end ASSEMBLER_REGISTER;
 
architecture STRUCTURAL of ASSEMBLER_REGISTER is
 
 
signal DATA_OUT_aux:bit_vector(55 downto 0);
signal LENGTH_OUT_aux:bit_vector(2 downto 0);
signal WRITE_OUT_aux : bit;
 
 
begin
 
process(CLK,CLEAR)
 begin
	if (CLEAR='0') then	
		DATA_OUT_aux <= "00000000000000000000000000000000000000000000000000000000";
		LENGTH_OUT_aux <= "000";
		WRITE_OUT_aux <= '0';
	elsif ((CLK'event) and (CLK='1')) then
		if (RESET='0') then	
			DATA_OUT_aux <= "00000000000000000000000000000000000000000000000000000000";
			LENGTH_OUT_aux <= "000";
			WRITE_OUT_aux <= '0';
		else
		      DATA_OUT_aux<= DATA_IN;
   	          LENGTH_OUT_aux<= LENGTH_IN;
			  WRITE_OUT_aux<= WRITE_IN;		
	--	else
	--	      DATA_OUT_aux<= DATA_OUT_aux;
   	  --        LENGTH_OUT_aux<= LENGTH_OUT_aux;
		--	  WRITE_OUT_aux<= WRITE_OUT_aux;
		end if;
	end if;
end process;
 
DATA_OUT <= DATA_OUT_aux;
LENGTH_OUT <= LENGTH_OUT_aux;
WRITE_OUT <= WRITE_OUT_aux;
 
end STRUCTURAL;