URL
https://opencores.org/ocsvn/16x2_lcd_controller/16x2_lcd_controller/trunk
Subversion Repositories 16x2_lcd_controller
[/] [16x2_lcd_controller/] [trunk/] [demo/] [readme.txt] - Rev 9
Compare with Previous | Blame | View Log
How to run the demo:
- create a new project in the ISE project navigator
- add files (Project>Add Source):
+ lcd16x2_ctrl.vhd
+ lcd16x2_ctrl_demo.vhd
+ pin_locations.ucf
- if you use the ML501 board you can leave pin_locations.ucf unchanged, otherwise you
have to adjust the locations for your board (see your board's schematics)
- open the file lcd16x2_ctrl_demo.vhd and adjust the constant CLK_PERIOD_NS (clock period in nanoseconds)
in case your board's oscillator frequency differs from 100MHz. Again, nothing needs to be done for
the ML501 board.
- implement the design and program FPGA