URL
https://opencores.org/ocsvn/8051/8051/trunk
Subversion Repositories 8051
[/] [8051/] [tags/] [rel_1/] [bench/] [verilog/] [oc8051_tb.v] - Rev 68
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// 8051 top level test bench //// //// //// //// This file is part of the 8051 cores project //// //// http://www.opencores.org/cores/8051/ //// //// //// //// Description //// //// top level test bench. //// //// //// //// To Do: //// //// nothing //// //// //// //// Author(s): //// //// - Simon Teran, simont@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.5 2002/10/17 19:00:50 simont // add external rom // // Revision 1.4 2002/09/30 17:33:58 simont // prepared header // // // synopsys translate_off `include "oc8051_timescale.v" // synopsys translate_on `include "oc8051_defines.v" module oc8051_tb; reg rst, clk; reg [15:0] pc_in; reg [7:0] p0_in, p1_in, p2_in; wire [31:0] idat_i; wire [15:0] ext_addr, iadr_o; wire write, write_xram, write_uart, txd, rxd, int_uart, int0, int1, t0, t1, bit_out, stb_o, ack_i, ack_xram, ack_uart, cyc_o, iack_i, istb_o, icyc_o; wire [7:0] data_in, data_out, p0_out, p1_out, p2_out, p3_out, data_out_uart, data_out_xram, p3_in; /// /// buffer for test vectors /// // // buffer reg [23:0] buff [255:0]; reg ea [1:0]; integer num; // // oc8051 controller // oc8051_top oc8051_top_1(.rst(rst), .clk(clk), .int0(int0), .int1(int1), .dat_i(data_in), .dat_o(data_out), .adr_o(ext_addr), .iadr_o(iadr_o), .istb_o(istb_o), .iack_i(iack_i), .icyc_o(icyc_o), .we_o(write), .p0_in(p0_in), .ack_i(ack_i), .stb_o(stb_o), .cyc_o(cyc_o), .p1_in(p1_in), .p2_in(p2_in), .p3_in(p3_in), .p0_out(p0_out), .p1_out(p1_out), .p2_out(p2_out), .p3_out(p3_out), .idat_i(idat_i), .ea(ea[0]), .rxd(rxd), .txd(txd), .t0(t0), .t1(t1)); // // external data ram // oc8051_xram oc8051_xram1 (.clk(clk), .rst(rst), .wr(write_xram), .addr(ext_addr), .data_in(data_out), .data_out(data_out_xram), .ack(ack_xram), .stb(stb_o)); defparam oc8051_xram1.DELAY = 2; // // external uart // oc8051_uart_test oc8051_uart_test1(.clk(clk), .rst(rst), .addr(ext_addr[7:0]), .wr(write_uart), .wr_bit(p3_out[0]), .data_in(data_out), .data_out(data_out_uart), .bit_out(bit_out), .rxd(txd), .txd(rxd), .ow(p3_out[1]), .intr(int_uart), .stb(stb_o), .ack(ack_uart)); // // exteranl program rom // // cache // // `ifdef OC8051_CACHE wire istb_i, icyc_i, iack_o; wire [15:0] iadr_i; wire [31:0] idat_o; oc8051_icache oc8051_icache1(.rst(rst), .clk(clk), // oc8051 .adr_i(iadr_o), .dat_o(idat_i), .stb_i(istb_o), .ack_o(iack_i), .cyc_i(icyc_o), // external rom .dat_i(idat_o), .stb_o(istb_i), .adr_o(iadr_i), .ack_i(iack_o), .cyc_o(icyc_i)); oc8051_xrom oc8051_xrom1(.rst(rst), .clk(clk), .addr(iadr_i), .data(idat_o), .stb_i(istb_i), .cyc_i(icyc_i), .ack_o(iack_o)); defparam oc8051_icache1.ADR_WIDTH = 6; // cache address wihth defparam oc8051_icache1.LINE_WIDTH = 3; // line address width (2 => 4x32) defparam oc8051_icache1.BL_NUM = 7; // number of blocks (2^BL_WIDTH-1); BL_WIDTH = ADR_WIDTH - LINE_WIDTH defparam oc8051_icache1.CACHE_RAM = 64; // cache ram x 32 (2^ADR_WIDTH) // // no cache // `else oc8051_xrom oc8051_xrom1(.rst(rst), .clk(clk), .addr(iadr_o), .data(idat_i), .stb_i(istb_o), .cyc_i(icyc_o), .ack_o(iack_i)); `endif // // // defparam oc8051_xrom1.DELAY = 5; assign write_xram = p3_out[7] & write; assign write_uart = !p3_out[7] & write; assign data_in = p3_out[7] ? data_out_xram : data_out_uart; assign ack_i = p3_out[7] ? ack_xram : ack_uart; assign p3_in = {7'b000000, bit_out, int_uart}; assign t0 = p3_out[5]; assign t1 = p3_out[6]; assign int0 = p3_out[3]; assign int1 = p3_out[4]; initial begin clk= 1'b0; rst= 1'b1; pc_in = 16'h0000; p0_in = 8'h00; p1_in = 8'h00; p2_in = 8'h00; #22 rst = 1'b0; //#444000 #7000000 $display("time ",$time, "\n faulire: end of time\n \n"); $finish; end always clk = #5 ~clk; initial $readmemh("../../../asm/vec/oc8051_test.vec", buff); initial $readmemb("../oc8051_ea.in", ea); initial num= 0; always @(p0_out or p1_out or p2_out) begin if ({p0_out, p1_out, p2_out} != buff[num]) begin $display("time ",$time, " faulire: mismatch on ports in step %d", num); $display(" p0_out %h", p0_out, " p1_out %h", p1_out, " p2_out %h", p2_out); $display(" testvecp %h", buff[num]); $display(" p_out %h%h%h", p0_out, p1_out, p2_out); #22 $finish; end else begin $display("time ",$time, " step %d", num, ": pass"); num = num+1; if (buff[num]===24'hxxxxxx) begin $display(""); $display(" Done!"); $finish; end end end initial $dumpvars; //initial $monitor("time ",$time," acc %h", data_out, " dptr %h", ext_addr, " write ", write, " p0_out %h", p0_out, " p1_out %h", p1_out); //initial $monitor("time ",$time, " p0_out ", p0_out); //initial $monitor("time ",$time," write ", write, " p0_out %h", p0_out, " p1_out %h", p1_out, " p2_out %h", p2_out, " p3_out %h", p3_out); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log