URL
https://opencores.org/ocsvn/System09/System09/trunk
Subversion Repositories System09
[/] [System09/] [branches/] [mkfiles_rev1/] [rtl/] [System09_Xilinx_ML506/] [ml50x_U1_fpga.ucf] - Rev 111
Go to most recent revision | Compare with Previous | Blame | View Log
NET AUDIO_BIT_CLK LOC="AF18"; # Bank 4, Vcco=3.3V, No DCI
NET AUDIO_SDATA_IN LOC="AE18"; # Bank 4, Vcco=3.3V, No DCI
NET AUDIO_SDATA_OUT LOC="AG16"; # Bank 4, Vcco=3.3V, No DCI
NET AUDIO_SYNC LOC="AF19"; # Bank 4, Vcco=3.3V, No DCI
NET BUS_ERROR_1 LOC="F6"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET BUS_ERROR_2 LOC="T10"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET CFG_ADDR_OUT0 LOC="AE12"; # Bank 2, Vcco=3.3V
NET CFG_ADDR_OUT1 LOC="AE13"; # Bank 2, Vcco=3.3V
NET CLK_27MHZ_FPGA LOC="AG18"; # Bank 4, Vcco=3.3V, No DCI
NET CLK_33MHZ_FPGA LOC="AH17"; # Bank 4, Vcco=3.3V, No DCI
NET CLK_FPGA_N LOC="K19"; # Bank 3, Vcco=2.5V, No DCI
NET CLK_FPGA_P LOC="L19"; # Bank 3, Vcco=2.5V, No DCI
NET CLKBUF_Q0_N LOC="H3"; # Bank 116, MGTREFCLKN_116, GTP_DUAL_X0Y4
NET CLKBUF_Q0_P LOC="H4"; # Bank 116, MGTREFCLKP_116, GTP_DUAL_X0Y4
NET CLKBUF_Q1_N LOC="J19"; # Bank 3, Vcco=2.5V, No DCI
NET CLKBUF_Q1_P LOC="K18"; # Bank 3, Vcco=2.5V, No DCI
NET CPLD_IO_1 LOC="W10"; # Bank 18, Vcco=3.3V, No DCI
NET CPU_TCK LOC="E6"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET CPU_TDO LOC="E7"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET CPU_TMS LOC="U10"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET CPU_TRST LOC="V10"; # Bank 18, Vcco=3.3V, No DCI
NET DDR2_A0 LOC="L30"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A1 LOC="M30"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A2 LOC="N29"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A3 LOC="P29"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A4 LOC="K31"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A5 LOC="L31"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A6 LOC="P31"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A7 LOC="P30"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A8 LOC="M31"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A9 LOC="R28"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A10 LOC="J31"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A11 LOC="R29"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A12 LOC="T31"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_A13 LOC="H29"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_BA0 LOC="G31"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_BA1 LOC="J30"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_BA2 LOC="R31"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_CAS_B LOC="E31"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_CKE0 LOC="T28"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_CKE1 LOC="U30"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_CLK0_N LOC="AJ29"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_CLK0_P LOC="AK29"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_CLK1_N LOC="F28"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_CLK1_P LOC="E28"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_CS0_B LOC="L29"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_CS1_B LOC="J29"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D0 LOC="AF30"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D1 LOC="AK31"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D2 LOC="AF31"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D3 LOC="AD30"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D4 LOC="AJ30"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D5 LOC="AF29"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D6 LOC="AD29"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D7 LOC="AE29"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D8 LOC="AH27"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D9 LOC="AF28"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D10 LOC="AH28"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D11 LOC="AA28"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D12 LOC="AG25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D13 LOC="AJ26"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D14 LOC="AG28"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D15 LOC="AB28"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D16 LOC="AC28"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D17 LOC="AB25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D18 LOC="AC27"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D19 LOC="AA26"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D20 LOC="AB26"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D21 LOC="AA24"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D22 LOC="AB27"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D23 LOC="AA25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D24 LOC="AC29"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D25 LOC="AB30"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D26 LOC="W31"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D27 LOC="V30"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D28 LOC="AC30"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D29 LOC="W29"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D30 LOC="V27"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D31 LOC="W27"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D32 LOC="V29"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D33 LOC="Y27"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D34 LOC="Y26"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D35 LOC="W24"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D36 LOC="V28"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D37 LOC="W25"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D38 LOC="W26"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D39 LOC="V24"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D40 LOC="R24"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D41 LOC="P25"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D42 LOC="N24"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D43 LOC="P26"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D44 LOC="T24"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D45 LOC="N25"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D46 LOC="P27"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D47 LOC="N28"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D48 LOC="M28"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D49 LOC="L28"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D50 LOC="F25"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D51 LOC="H25"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D52 LOC="K27"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D53 LOC="K28"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D54 LOC="H24"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D55 LOC="G26"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D56 LOC="G25"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D57 LOC="M26"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D58 LOC="J24"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D59 LOC="L26"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D60 LOC="J27"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D61 LOC="M25"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D62 LOC="L25"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_D63 LOC="L24"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DM0 LOC="AJ31"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DM1 LOC="AE28"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DM2 LOC="Y24"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DM3 LOC="Y31"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DM4 LOC="V25"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DM5 LOC="P24"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DM6 LOC="F26"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DM7 LOC="J25"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS0_N LOC="AA30"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS0_P LOC="AA29"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS1_N LOC="AK27"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS1_P LOC="AK28"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS2_N LOC="AJ27"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS2_P LOC="AK26"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS3_N LOC="AA31"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS3_P LOC="AB31"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS4_N LOC="Y29"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS4_P LOC="Y28"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS5_N LOC="E27"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS5_P LOC="E26"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS6_N LOC="G28"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS6_P LOC="H28"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS7_N LOC="H27"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_DQS7_P LOC="G27"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_ODT0 LOC="F31"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_ODT1 LOC="F30"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_RAS_B LOC="H30"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_SCL LOC="E29"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_SDA LOC="F29"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DDR2_WE_B LOC="K29"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DVI_D0 LOC="AB8"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D1 LOC="AC8"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D2 LOC="AN12"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D3 LOC="AP12"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D4 LOC="AA9"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D5 LOC="AA8"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D6 LOC="AM13"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D7 LOC="AN13"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D8 LOC="AA10"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D9 LOC="AB10"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D10 LOC="AP14"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_D11 LOC="AN14"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_DE LOC="AE8"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_GPIO1 LOC="N30"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET DVI_H LOC="AM12"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_RESET_B LOC="AK6"; # Bank 18, Vcco=3.3V, No DCI
NET DVI_V LOC="AM11"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_XCLK_N LOC="AL10"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET DVI_XCLK_P LOC="AL11"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET FAN_ALERT_B LOC="T30"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET FLASH_ADV_B LOC="F13"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET FLASH_AUDIO_RESET_B LOC="AG17"; # Bank 4, Vcco=3.3V, No DCI
NET FLASH_CE_B LOC="AE14"; # Bank 2, Vcco=3.3V
NET FLASH_CLK LOC="N9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET FLASH_OE_B LOC="AF14"; # Bank 2, Vcco=3.3V
NET FLASH_WAIT LOC="G13"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET FPGA_AVDD LOC="T18"; # Bank 0, Vcco=3.3V
NET FPGA_CCLK-R LOC="N15"; # Bank 0, Vcco=3.3V
NET FPGA_CPU_RESET_B LOC="E9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET FPGA_CS_B LOC="N22"; # Bank 0, Vcco=3.3V
NET FPGA_CS0_B LOC="AF21"; # Bank 2, Vcco=3.3V
NET FPGA_DIFF_CLK_OUT_N LOC="J21"; # Bank 3, Vcco=2.5V, No DCI
NET FPGA_DIFF_CLK_OUT_P LOC="J20"; # Bank 3, Vcco=2.5V, No DCI
NET FPGA_DIN LOC="P15"; # Bank 0, Vcco=3.3V
NET FPGA_DONE LOC="M15"; # Bank 0, Vcco=3.3V
NET FPGA_DOUT_BUSY LOC="AD15"; # Bank 0, Vcco=3.3V
NET FPGA_DX_N LOC="W17"; # Bank 0, Vcco=3.3V
NET FPGA_DX_P LOC="W18"; # Bank 0, Vcco=3.3V
NET FPGA_EXP_TCK LOC="AB15"; # Bank 0, Vcco=3.3V
NET FPGA_EXP_TMS LOC="AC14"; # Bank 0, Vcco=3.3V
NET FPGA_HSWAPEN LOC="M23"; # Bank 0, Vcco=3.3V
NET FPGA_INIT_B LOC="N14"; # Bank 0, Vcco=3.3V
NET FPGA_M0 LOC="AD21"; # Bank 0, Vcco=3.3V
NET FPGA_M1 LOC="AC22"; # Bank 0, Vcco=3.3V
NET FPGA_M2 LOC="AD22"; # Bank 0, Vcco=3.3V
NET FPGA_PROG_B LOC="M22"; # Bank 0, Vcco=3.3V
NET FPGA_RDWR_B LOC="N23"; # Bank 0, Vcco=3.3V
NET FPGA_ROTARY_INCA LOC="AH30"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET FPGA_ROTARY_INCB LOC="AG30"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET FPGA_ROTARY_PUSH LOC="AH29"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET FPGA_SERIAL1_RX LOC="AG15"; # Bank 4, Vcco=3.3V, No DCI
NET FPGA_SERIAL1_TX LOC="AG20"; # Bank 4, Vcco=3.3V, No DCI
NET FPGA_SERIAL2_RX LOC="G10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET FPGA_SERIAL2_TX LOC="F10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET FPGA_TDI LOC="AC15"; # Bank 0, Vcco=3.3V
NET FPGA_TDO LOC="AD14"; # Bank 0, Vcco=3.3V
NET FPGA_V_N LOC="V17"; # Bank 0, Vcco=3.3V (SYSMON External Input: VN) J9-10
NET FPGA_V_P LOC="U18"; # Bank 0, Vcco=3.3V (SYSMON External Input: VP) J9-9
NET FPGA_VBATT LOC="L23"; # Bank 0, Vcco=3.3V
NET FPGA_VREFP LOC="V18"; # Bank 0, Vcco=3.3V
NET FPGA_VRN_B11 LOC="N33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET FPGA_VRN_B13 LOC="AG33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET FPGA_VRN_B17 LOC="AD31"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET FPGA_VRN_B19 LOC="N27"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET FPGA_VRN_B20 LOC="L10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET FPGA_VRN_B21 LOC="AJ25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET FPGA_VRN_B22 LOC="AF8"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET FPGA_VRP_B11 LOC="M33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET FPGA_VRP_B13 LOC="AH33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET FPGA_VRP_B17 LOC="AE31"; # Bank 17, Vcco=1.8V, DCI using 49.9 ohm resistors
NET FPGA_VRP_B19 LOC="M27"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET FPGA_VRP_B20 LOC="L11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET FPGA_VRP_B21 LOC="AH25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET FPGA_VRP_B22 LOC="AE9"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET GPIO_DIP_SW1 LOC="U25"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_DIP_SW2 LOC="AG27"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_DIP_SW3 LOC="AF25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_DIP_SW4 LOC="AF26"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_DIP_SW5 LOC="AE27"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_DIP_SW6 LOC="AE26"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_DIP_SW7 LOC="AC25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_DIP_SW8 LOC="AC24"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_LED_0 LOC="H18"; # Bank 3, Vcco=2.5V, No DCI
NET GPIO_LED_1 LOC="L18"; # Bank 3, Vcco=2.5V, No DCI
NET GPIO_LED_2 LOC="G15"; # Bank 3, Vcco=2.5V, No DCI
NET GPIO_LED_3 LOC="AD26"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_LED_4 LOC="G16"; # Bank 3, Vcco=2.5V, No DCI
NET GPIO_LED_5 LOC="AD25"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_LED_6 LOC="AD24"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_LED_7 LOC="AE24"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET GPIO_LED_C LOC="E8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET GPIO_LED_E LOC="AG23"; # Bank 2, Vcco=3.3V
NET GPIO_LED_N LOC="AF13"; # Bank 2, Vcco=3.3V
NET GPIO_LED_S LOC="AG12"; # Bank 2, Vcco=3.3V
NET GPIO_LED_W LOC="AF23"; # Bank 2, Vcco=3.3V
NET GPIO_SW_C LOC="AJ6"; # Bank 18, Vcco=3.3V, No DCI
NET GPIO_SW_E LOC="AK7"; # Bank 18, Vcco=3.3V, No DCI
NET GPIO_SW_N LOC="U8"; # Bank 18, Vcco=3.3V, No DCI
NET GPIO_SW_S LOC="V8"; # Bank 18, Vcco=3.3V, No DCI
NET GPIO_SW_W LOC="AJ7"; # Bank 18, Vcco=3.3V, No DCI
NET HDR1_2 LOC="H33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_4 LOC="F34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_6 LOC="H34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_8 LOC="G33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_10 LOC="G32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_12 LOC="H32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_14 LOC="J32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_16 LOC="J34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_18 LOC ="L33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_20 LOC="M32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_22 LOC="P34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_24 LOC="N34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_26 LOC="AA34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[5]) J6-26
NET HDR1_28 LOC="AD32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_30 LOC="Y34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[5]) J6-30
NET HDR1_32 LOC="Y32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_34 LOC="W32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_36 LOC="AH34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_38 LOC="AE32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_40 LOC="AG32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_42 LOC="AH32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_44 LOC="AK34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_46 LOC="AK33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_48 LOC="AJ32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_50 LOC="AK32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_52 LOC="AL34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_54 LOC="AL33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_56 LOC="AM33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_58 LOC="AJ34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_60 LOC="AM32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_62 LOC="AN34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR1_64 LOC="AN33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR2_2_SM_8_N LOC="K34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[15]) J4-2
NET HDR2_4_SM_8_P LOC="L34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[15]) J4-4
NET HDR2_6_SM_7_N LOC="K32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[14]) J4-6
NET HDR2_8_SM_7_P LOC="K33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[14]) J4-8
NET HDR2_10_DIFF_0_N LOC="N32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[13]) J4-10
NET HDR2_12_DIFF_0_P LOC="P32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[13]) J4-12
NET HDR2_14_DIFF_1_N LOC="R34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[12]) J4-14
NET HDR2_16_DIFF_1_P LOC="T33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[12]) J4-16
NET HDR2_18_DIFF_2_N LOC="R32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[11]) J4-18
NET HDR2_20_DIFF_2_P LOC="R33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[11]) J4-20
NET HDR2_22_SM_10_N LOC="T34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[10]) J4-22
NET HDR2_24_SM_10_P LOC="U33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[10]) J4-24
NET HDR2_26_SM_11_N LOC="U31"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[9]) J4-26
NET HDR2_28_SM_11_P LOC="U32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[9]) J4-28
NET HDR2_30_DIFF_3_N LOC="V33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[8]) J4-30
NET HDR2_32_DIFF_3_P LOC="V32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[8]) J4-32
NET HDR2_34_SM_15_N LOC="V34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[7]) J4-34
NET HDR2_36_SM_15_P LOC="W34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[7]) J4-36
NET HDR2_38_SM_6_N LOC="AA33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[6]) J4-38
NET HDR2_40_SM_6_P LOC="Y33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[6]) J4-40
NET HDR2_42_SM_14_N LOC="AE34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[0]) J4-42
NET HDR2_44_SM_14_P LOC="AF34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[0]) J4-44
NET HDR2_46_SM_12_N LOC="AE33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[1]) J4-46
NET HDR2_48_SM_12_P LOC="AF33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[1]) J4-48
NET HDR2_50_SM_5_N LOC="AD34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[4]) J4-50
NET HDR2_52_SM_5_P LOC="AC34"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[4]) J4-52
NET HDR2_54_SM_13_N LOC="AB32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[3]) J4-54
NET HDR2_56_SM_13_P LOC="AC32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[3]) J4-56
NET HDR2_58_SM_4_N LOC="AB33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXN[2]) J4-58
NET HDR2_60_SM_4_P LOC="AC33"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20 (SYSMON External Input: VAUXP[2]) J4-60
NET HDR2_62_SM_9_N LOC="AP32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET HDR2_64_SM_9_P LOC="AN32"; # Bank 13, Vcco=2.5V or 3.3V user selectable by J20
NET IIC_SCL_MAIN LOC="F9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET IIC_SCL_SFP LOC="R26"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET IIC_SCL_VIDEO LOC="U27"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET IIC_SDA_MAIN LOC="F8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET IIC_SDA_SFP LOC="U28"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET IIC_SDA_VIDEO LOC="T29"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET KEYBOARD_CLK LOC="T26"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET KEYBOARD_DATA LOC="T25"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET LCD_FPGA_DB4 LOC="T9"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET LCD_FPGA_DB5 LOC="G7"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET LCD_FPGA_DB6 LOC="G6"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET LCD_FPGA_DB7 LOC="T11"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET LCD_FPGA_E LOC="AC9"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET LCD_FPGA_RS LOC="J17"; # Bank 3, Vcco=2.5V, No DCI
NET LCD_FPGA_RW LOC="AC10"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET LOOPBK_114_N LOC="AG1"; # Bank 118, MGTRXN1_118, GTP_DUAL_X0Y1
NET LOOPBK_114_N LOC="AH2"; # Bank 118, MGTTXN1_118, GTP_DUAL_X0Y1
NET LOOPBK_114_P LOC="AH1"; # Bank 118, MGTRXP1_118, GTP_DUAL_X0Y1
NET LOOPBK_114_P LOC="AJ2"; # Bank 118, MGTTXP1_118, GTP_DUAL_X0Y1
NET LOOPBK_116_N LOC="R1"; # Bank 112, MGTRXN1_112, GTP_DUAL_X0Y3
NET LOOPBK_116_N LOC="T2"; # Bank 112, MGTTXN1_112, GTP_DUAL_X0Y3
NET LOOPBK_116_P LOC="T1"; # Bank 112, MGTRXP1_112, GTP_DUAL_X0Y3
NET LOOPBK_116_P LOC="U2"; # Bank 112, MGTTXP1_112, GTP_DUAL_X0Y3
NET MOUSE_CLK LOC="R27"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET MOUSE_DATA LOC="U26"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET PC4_HALT_B LOC="W9"; # Bank 18, Vcco=3.3V, No DCI
NET PCIE_CLK_QO_N LOC="AF3"; # Bank 118, MGTREFCLKN_118, GTP_DUAL_X0Y1
NET PCIE_CLK_QO_P LOC="AF4"; # Bank 118, MGTREFCLKP_118, GTP_DUAL_X0Y1
NET PCIE_PRSNT_B_FPGA LOC="AF24"; # Bank 21, Vcco=1.8V, DCI using 49.9 ohm resistors
NET PCIE_RX_N LOC="AF1"; # Bank 118, MGTRXN0_118, GTP_DUAL_X0Y1
NET PCIE_RX_P LOC="AE1"; # Bank 118, MGTRXP0_118, GTP_DUAL_X0Y1
NET PCIE_TX_N LOC="AE2"; # Bank 118, MGTTXN0_118, GTP_DUAL_X0Y1
NET PCIE_TX_P LOC="AD2"; # Bank 118, MGTTXP0_118, GTP_DUAL_X0Y1
NET PHY_COL LOC="B32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_CRS LOC="E34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_INT LOC="H20"; # Bank 3, Vcco=2.5V, No DCI
NET PHY_MDC LOC="H19"; # Bank 3, Vcco=2.5V, No DCI
NET PHY_MDIO LOC="H13"; # Bank 3, Vcco=2.5V, No DCI
NET PHY_RESET LOC="J14"; # Bank 3, Vcco=2.5V, No DCI
NET PHY_RXCLK LOC="H17"; # Bank 3, Vcco=2.5V, No DCI
NET PHY_RXCTL_RXDV LOC="E32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_RXD0 LOC="A33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_RXD1 LOC="B33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_RXD2 LOC="C33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_RXD3 LOC="C32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_RXD4 LOC="D32"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_RXD5 LOC="C34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_RXD6 LOC="D34"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_RXD7 LOC="F33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_RXER LOC="E33"; # Bank 11, Vcco=2.5V or 3.3V user selectable by J20
NET PHY_TXC_GTXCLK LOC="J16"; # Bank 3, Vcco=2.5V, No DCI
NET PHY_TXCLK LOC="K17"; # Bank 3, Vcco=2.5V, No DCI
NET PHY_TXCTL_TXEN LOC="AJ10"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET PHY_TXD0 LOC="AF11"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET PHY_TXD1 LOC="AE11"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET PHY_TXD2 LOC="AH9"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET PHY_TXD3 LOC="AH10"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET PHY_TXD4 LOC="AG8"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET PHY_TXD5 LOC="AH8"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET PHY_TXD6 LOC="AG10"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET PHY_TXD7 LOC="AG11"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET PHY_TXER LOC="AJ9"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET PIEZO_SPEAKER LOC="G30"; # Bank 15, Vcco=1.8V, DCI using 49.9 ohm resistors
NET RESERVED1 LOC="AB23"; # Bank 0, Vcco=3.3V
NET RESERVED2 LOC="AC23"; # Bank 0, Vcco=3.3V
NET RREF LOC="V4"; # Bank 112, MGTRREF_112, GTP_DUAL_X0Y3
NET SATA1_RX_N LOC="Y1"; # Bank 114, MGTRXN0_114, GTP_DUAL_X0Y2
NET SATA1_RX_P LOC="W1"; # Bank 114, MGTRXP0_114, GTP_DUAL_X0Y2
NET SATA1_TX_N LOC="W2"; # Bank 114, MGTTXN0_114, GTP_DUAL_X0Y2
NET SATA1_TX_P LOC="V2"; # Bank 114, MGTTXP0_114, GTP_DUAL_X0Y2
NET SATA2_RX_N LOC="AA1"; # Bank 114, MGTRXN1_114, GTP_DUAL_X0Y2
NET SATA2_RX_P LOC="AB1"; # Bank 114, MGTRXP1_114, GTP_DUAL_X0Y2
NET SATA2_TX_N LOC="AB2"; # Bank 114, MGTTXN1_114, GTP_DUAL_X0Y2
NET SATA2_TX_P LOC="AC2"; # Bank 114, MGTTXP1_114, GTP_DUAL_X0Y2
NET SATACLK_QO_N LOC="Y3"; # Bank 114, MGTREFCLKN_114, GTP_DUAL_X0Y2
NET SATACLK_QO_P LOC="Y4"; # Bank 114, MGTREFCLKP_114, GTP_DUAL_X0Y2
NET SFP_RX_N LOC="H1"; # Bank 116, MGTRXN0_116, GTP_DUAL_X0Y4
NET SFP_RX_P LOC="G1"; # Bank 116, MGTRXP0_116, GTP_DUAL_X0Y4
NET SFP_TX_DISABLE_FPGA LOC="K24"; # Bank 19, Vcco=1.8V, DCI using 49.9 ohm resistors
NET SFP_TX_N LOC="G2"; # Bank 116, MGTTXN0_116, GTP_DUAL_X0Y4
NET SFP_TX_P LOC="F2"; # Bank 116, MGTTXP0_116, GTP_DUAL_X0Y4
NET SGMII_RX_N LOC="P1"; # Bank 112, MGTRXN0_112, GTP_DUAL_X0Y3
NET SGMII_RX_P LOC="N1"; # Bank 112, MGTRXP0_112, GTP_DUAL_X0Y3
NET SGMII_TX_N LOC="N2"; # Bank 112, MGTTXN0_112, GTP_DUAL_X0Y3
NET SGMII_TX_P LOC="M2"; # Bank 112, MGTTXP0_112, GTP_DUAL_X0Y3
NET SGMIICLK_QO_N LOC="P3"; # Bank 112, MGTREFCLKN_112, GTP_DUAL_X0Y3
NET SGMIICLK_QO_P LOC="P4"; # Bank 112, MGTREFCLKP_112, GTP_DUAL_X0Y3
NET SMA_DIFF_CLK_IN_N LOC="H15"; # Bank 3, Vcco=2.5V, No DCI
NET SMA_DIFF_CLK_IN_P LOC="H14"; # Bank 3, Vcco=2.5V, No DCI
NET SMA_RX_N LOC="J1"; # Bank 116, MGTRXN1_116, GTP_DUAL_X0Y4
NET SMA_RX_P LOC="K1"; # Bank 116, MGTRXP1_116, GTP_DUAL_X0Y4
NET SMA_TX_N LOC="K2"; # Bank 116, MGTTXN1_116, GTP_DUAL_X0Y4
NET SMA_TX_P LOC="L2"; # Bank 116, MGTTXP1_116, GTP_DUAL_X0Y4
NET SPI_CE_B LOC="V9"; # Bank 18, Vcco=3.3V, No DCI
NET SRAM_ADV_LD_B LOC="H8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_BW0 LOC="D10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_BW1 LOC="D11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_BW2 LOC="J11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_BW3 LOC="K11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_CLK LOC="AG21"; # Bank 4, Vcco=3.3V, No DCI
NET SRAM_CLK LOC="G8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_CS_B LOC="J10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D16 LOC="N10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D17 LOC="E13"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D18 LOC="E12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D19 LOC="L9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D20 LOC="M10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D21 LOC="E11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D22 LOC="F11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D23 LOC="L8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D24 LOC="M8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D25 LOC="G12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D26 LOC="G11"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D27 LOC="C13"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D28 LOC="B13"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D29 LOC="K9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D30 LOC="K8"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_D31 LOC="J9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_DQP0 LOC="D12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_DQP1 LOC="C12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_DQP2 LOC="H10"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_DQP3 LOC="H9"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_FLASH_A0 LOC="K12"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A1 LOC="K13"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A2 LOC="H23"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A3 LOC="G23"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A4 LOC="H12"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A5 LOC="J12"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A6 LOC="K22"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A7 LOC="K23"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A8 LOC="K14"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A9 LOC="L14"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A10 LOC="H22"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A11 LOC="G22"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A12 LOC="J15"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A13 LOC="K16"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A14 LOC="K21"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A15 LOC="J22"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A16 LOC="L16"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A17 LOC="L15"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A18 LOC="L20"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A19 LOC="L21"; # Bank 1, Vcco=3.3V
NET SRAM_FLASH_A20 LOC="AE23"; # Bank 2, Vcco=3.3V
NET SRAM_FLASH_A21 LOC="AE22"; # Bank 2, Vcco=3.3V
NET SRAM_FLASH_D0 LOC="AD19"; # Bank 2, Vcco=3.3V
NET SRAM_FLASH_D1 LOC="AE19"; # Bank 2, Vcco=3.3V
NET SRAM_FLASH_D2 LOC="AE17"; # Bank 2, Vcco=3.3V
NET SRAM_FLASH_D3 LOC="AF16"; # Bank 2, Vcco=3.3V
NET SRAM_FLASH_D4 LOC="AD20"; # Bank 2, Vcco=3.3V
NET SRAM_FLASH_D5 LOC="AE21"; # Bank 2, Vcco=3.3V
NET SRAM_FLASH_D6 LOC="AE16"; # Bank 2, Vcco=3.3V
NET SRAM_FLASH_D7 LOC="AF15"; # Bank 2, Vcco=3.3V
NET SRAM_FLASH_D8 LOC="AH13"; # Bank 4, Vcco=3.3V, No DCI
NET SRAM_FLASH_D9 LOC="AH14"; # Bank 4, Vcco=3.3V, No DCI
NET SRAM_FLASH_D10 LOC="AH19"; # Bank 4, Vcco=3.3V, No DCI
NET SRAM_FLASH_D11 LOC="AH20"; # Bank 4, Vcco=3.3V, No DCI
NET SRAM_FLASH_D12 LOC="AG13"; # Bank 4, Vcco=3.3V, No DCI
NET SRAM_FLASH_D13 LOC="AH12"; # Bank 4, Vcco=3.3V, No DCI
NET SRAM_FLASH_D14 LOC="AH22"; # Bank 4, Vcco=3.3V, No DCI
NET SRAM_FLASH_D15 LOC="AG22"; # Bank 4, Vcco=3.3V, No DCI
NET SRAM_FLASH_WE_B LOC="AF20"; # Bank 2, Vcco=3.3V
NET SRAM_MODE LOC="A13"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SRAM_OE_B LOC="B12"; # Bank 20, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPA00 LOC="G5"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPA01_USB_A0 LOC="N7"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPA02_USB_A1 LOC="N5"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPA03 LOC="P5"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPA04 LOC="R6"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPA05 LOC="M6"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPA06 LOC="L6"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPBRDY LOC="H5"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPCE LOC="M5"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPIRQ LOC="M7"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPOE_USB_RD_B LOC="N8"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_MPWE_USB_WR_B LOC="R9"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D0 LOC="P9"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D1 LOC="T8"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D2 LOC="J7"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D3 LOC="H7"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D4 LOC="R7"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D5 LOC="U7"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D6 LOC="P7"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D7 LOC="P6"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D8 LOC="R8"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D9 LOC="L5"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D10 LOC="L4"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D11 LOC="K6"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D12 LOC="J5"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D13 LOC="T6"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D14 LOC="K7"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET SYSACE_USB_D15 LOC="J6"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET TRC_CLK LOC="AD9"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET TRC_TS1E LOC="AK9"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET TRC_TS1O LOC="AF10"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET TRC_TS2E LOC="AK8"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET TRC_TS2O LOC="AF9"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET TRC_TS3 LOC="AJ11"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET TRC_TS4 LOC="AK11"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET TRC_TS5 LOC="AD11"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET TRC_TS6 LOC="AD10"; # Bank 22, Vcco=3.3V, DCI using 49.9 ohm resistors
NET USB_CS_B LOC="P10"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET USB_INT LOC="F5"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET USB_RESET_B LOC="R11"; # Bank 12, Vcco=3.3V, DCI using 49.9 ohm resistors
NET USER_CLK LOC="AH15"; # Bank 4, Vcco=3.3V, No DCI
NET VGA_IN_BLUE0 LOC="AC4"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_BLUE1 LOC="AC5"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_BLUE2 LOC="AB6"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_BLUE3 LOC="AB7"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_BLUE4 LOC="AA5"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_BLUE5 LOC="AB5"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_BLUE6 LOC="AC7"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_BLUE7 LOC="AD7"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_CLAMP LOC="AH7"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_COAST LOC="AG7"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_DATA_CLK LOC="AH18"; # Bank 4, Vcco=3.3V, No DCI
NET VGA_IN_GREEN0 LOC="Y8"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_GREEN1 LOC="Y9"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_GREEN2 LOC="AD4"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_GREEN3 LOC="AD5"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_GREEN4 LOC="AA6"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_GREEN5 LOC="Y7"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_GREEN6 LOC="AD6"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_GREEN7 LOC="AE6"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_HSOUT LOC="AE7"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_ODD_EVEN_B LOC="W6"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_RED0 LOC="AG5"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_RED1 LOC="AF5"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_RED2 LOC="W7"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_RED3 LOC="V7"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_RED4 LOC="AH5"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_RED5 LOC="AG6"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_RED6 LOC="Y11"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_RED7 LOC="W11"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_SOGOUT LOC="AF6"; # Bank 18, Vcco=3.3V, No DCI
NET VGA_IN_VSOUT LOC="Y6"; # Bank 18, Vcco=3.3V, No DCI
Go to most recent revision | Compare with Previous | Blame | View Log